arXiv subjects

R. Lauck

Publications and source records attributed to R. Lauck.

11 recordsLinked to original sources

arXiv2011

Vibrational and Thermal Properties of ZnX (X=Se, Te): Density Functional Theory (LDA and GGA) versus Experiment

We calculated the phonon dispersion relations of ZnX (X=Se, Te) employing ab initio techniques. These relations have been used to evaluate the temperature dependence of the respective specific heats of crystals with varied isotopic compositions. These results have been compared with mea- surements performed on crystals down to 2 K. The calculated and measured data are generally in excellent agreement with each other. Trends in the phonon dispersion relations and the correspond- ing densities of states for the zinc chalcogenide series of zincblende-type materials are discussed.

cond-mat.mtrl-sci↗

arXiv2011

Electronic and phononic properties of the chalcopyrite CuGaS2

The availability of ab initio electronic calculations and the concomitant techniques for deriving the corresponding lattice dynamics have been profusely used for calculating thermodynamic and vibrational properties of semiconductors, as well as their dependence on isotopic masses. The latter have been compared with experimental data for elemental and binary semiconductors with different isotopic compositions. Here we present theoretical and experimental data for several vibronic and thermodynamic properties of CuGa2, a canonical ternary semiconductor of the chalcopyrite family. Among these properties are the lattice parameters, the phonon dispersion relations and densities of states (projected on the Cu, Ga, and S constituents), the specific heat and the volume thermal expansion coefficient. The calculations were performed with the ABINIT and VASP codes within the LDA approximation for exchange and correlation and the results are compared with data obtained on samples with the natural isotope composition for Cu, Ga and S, as well as for isotope enriched samples.

cond-mat.mtrl-sci↗

arXiv2010

Electronic and phononic properties of cinnabar: ab initio calculations and some experimental results

We report ab initio calculations of the electronic band structure, the corresponding optical spectra, and the phonon dispersion relations of trigonal alpha-HgS (cinnabar). The calculated dielectric functions are compared with unpublished optical measurements by Zallen and coworkers. The phonon dispersion relations are used to calculate the temperature and isotopic mass dependence of the specific heat which has been compared with experimental data obtained on samples with the natural isotope abundances of the elements Hg and S (natural minerals and vapor phase grown samples) and on samples prepared from isotope enriched elements by vapor phase transport. Comparison of the calculated vibrational frequencies with Raman and ir data is also presented. Contrary to the case of cubic beta-HgS (metacinnabar), the spin-orbit splitting of the top valence bands at the Gamma-point of the Brillouin zone (Delta_0) is positive, because of a smaller admixture of 5d core electrons of Hg. Calculations of the lattice parameters, and the pressure dependence of Delta_0 and the corresponding direct gap E_0~2eV are also presented. The lowest absorption edge is confirmed to be indirect.

cond-mat.mtrl-sci↗

arXiv2010

A Dual-Purpose Ion-Accelerator for Nuclear-Reaction-Based Explosives-and SNM-Detection in Massive Cargo

A dual-purpose ion-accelerator concept, capable of serving as radiation source in a versatile, nuclear-reaction-based cargo inspection system, is presented. The system will automatically and reliably detect small, operationally-relevant quantities of concealed explosives and special nuclear materials (SNM). It will be cost-effective, employing largely-common hardware, but different reactions/DAQ-modes. Typical expected throughput is 10-20 aviation containers/hr. PACS: 25.20.Dc; 25.40.Ny; 27.20.+n; 29.27.Fh; 79.77.+g; 89.20.Bb; 89.20.Dd Keywords: Cargo inspection; Nuclear-reaction-based methods; Explosives detection; SNM detection

nucl-ex↗

arXiv2009

Electronic, vibrational, and thermodynamic properties of ZnS (zincblende and rocksalt structure)

We have measured the specific heat of zincblende ZnS for several isotopic compositions and over a broad temperature range (3 to 1100 K). We have compared these results with calculations based on ab initio electronic band structures, performed using both LDA and GGA exchange- correlation functionals. We have compared the lattice dynamics obtained in this manner with experimental data and have calculated the one-phonon and two-phonon densities of states. We have also calculated mode Grueneisen parameters at a number of high symmetry points of the Brillouin zone. The electronic part of our calculations has been used to investigate the effect of the 3d core electrons of zinc on the spin-orbit splitting of the top valence bands. The effect of these core electrons on the band structure of the rock salt modification of ZnS is also discussed.

cond-mat.mtrl-sci↗

arXiv2009

Electronic, vibrational and thermodynamic properties of beta-HgS (metacinnabar), HgSe and HgTe

We report ab initio calculations of the electronic band structure and the phonon dispersion relations of the zincblende-type mercury chalcogenides (beta-HgS, HgSe, and HgTe). The latter have been used to evaluate the temperature dependence of the specific heat which has been compared with experimental data. The electronic band structure of these materials has been confirmed to have an inverted direct gap of the alpha-tin type, which makes HgSe and HgTe semimetallic. For beta-HgS, however, our calculations predict a negative spin-orbit splitting which restores semiconducting properties to the material in spite of the inverted gap. We have calculated the spin-orbit induced linear terms in k which appear at the Gamma_8 valence bands. We have also investigated the pressure dependence of the crystal structure and the phonons.

cond-mat.mtrl-sci↗

arXiv2008

Lattice Properties of PbX (X = S, Se, Te): Experimental Studies and ab initio Calculations Including Spin-Orbit Effects

During the past five years the low temperature heat capacity of simple semiconductors and insulators has received renewed attention. Of particular interest has been its dependence on isotopic masses and the effect of spin- orbit coupling in ab initio calculations. Here we concentrate on the lead chalcogenides PbS, PbSe and PbTe. These materials, with rock salt structure, have different natural isotopes for both cations and anions, a fact that allows a systematic experimental and theoretical study of isotopic effects e.g. on the specific heat. Also, the large spin-orbit splitting of the 6p electrons of Pb and the 5p of Te allows, using a computer code which includes spin-orbit interaction, an investigation of the effect of this interaction on the phonon dispersion relations and the temperature dependence of the specific heat and on the lattice parameter. It is shown that agreement between measurements and calculations significantly improves when spin-orbit interaction is included.

cond-mat.mtrl-sci↗

arXiv2007

Temperature-dependent Raman scattering of natural and isotopically substituted PbS

Lead sulfide is an important semiconductor that has found technological applications for over a century. Raman spectroscopy, a standard tool for the investigation and characterization of semiconductors, has limited application to this material because of the forbidden nature of its first order scattering and its opacity to visible lasers. Nevertheless, useful vibrational spectra from two-phonon processes are obtained with red lasers, probably because of a resonance in the concomitant electronic transitions. Here we report temperature dependent spectra, covering the 10-300 K range, for two samples with different sulfur isotopic compositions. The results are analyzed by comparison with ab initio calculations of the lattice dynamics of PbS and the corresponding densities of one and two-phonon states. Emphasis is placed on the analysis of the two phonon band centered at ~430 cm-1.

cond-mat.mtrl-sci↗

arXiv2007

Heat Capacity of PbS: Isotope Effects

In recent years, the availability of highly pure stable isotopes has made possible the investigation of the dependence of the physical properties of crystals, in particular semiconductors, on their isotopic composition. Following the investigation of the specific heat ($C_p$, $C_v$) of monatomic crystals such as diamond, silicon, and germanium, similar investigations have been undertaken for the tetrahedral diatomic systems ZnO and GaN (wurtzite structure), for which the effect of the mass of the cation differs from that of the anion. In this article we present measurements for a semiconductor with rock salt structure, namely lead sulfide. Because of the large difference in the atomic mass of both constituents ($M_{\rm Pb}$= 207.21 and ($M_{\rm S}$=32.06 a.m.u., for the natural isotopic abundance) the effects of varying the cation and that of the anion mass are very different for this canonical semiconductor. We compare the measured temperature dependence of $C_p \approx C_v$, and the corresponding derivatives with respect to ($M_{\rm Pb}$ and $M_{\rm S}$), with \textit{\textit{ab initio}} calculations based on the lattice dynamics obtained from the local density approximation (LDA) electronic band structure. Quantitative deviations between theory and experiment are attributed to the absence of spin-orbit interaction in the ABINIT program used for the electronic band structure calculations.

cond-mat.mtrl-sci↗

arXiv2007

A position- and time-sensitive photon-counting detector with delay-line read-out

We have developed image intensifier tubes with delay-anode read-out for time- and position-sensitive photon counting. The timing precision is better than 1 ns with 1000x1000 pixels position resolution and up to one megacounts/s processing rate. Large format detectors of 40 and 75 mm active diameter with internal helical-wire delay-line anodes have been produced and specified. A different type of 40 and 25 mm tubes with semi-conducting screen for image charge read-out allow for an economic and robust tube design and for placing the read-out anodes outside the sealed housing. Two types of external delay-line anodes, i.e. pick-up electrodes for the image charge, have been tested. We present tests of the detector and anode performance. Due to the low background this technique is well suited for applications with very low light intensity and especially if a precise time tagging for each photon is required. As an example we present the application of scintillator read-out in time-of-flight (TOF) neutron radiography. Further applications so far are Fluorescence Life-time Microscopy (FLIM) and Astronomy

physics.ins-det↗

arXiv2004

Effect of isotopic mass on the photoluminescence spectra of beta zinc sulfide

Zinc sulfide is a wide bandgap semiconductor which crystallizes in either the wurtzite modification (a-ZnS), the zincblende modification (b-ZnS) or as one of several similar tetrahedrally coordinated polytypes. In this work, we report a photoluminescence study of different samples of isotopically pure b-ZnS crystals, and crystals with the natural isotopic abundances, at 15 and 77 K. The derivatives of the free and bound exciton energies on isotopic mass have been obtained. They allow us to estimate the contribution of the zinc and sulfur vibrations to the bandgap renormalization energy by electron-phonon interaction. A two-oscillator model based on the zinc and sulfur renormalization energies has been used to account for the temperature dependence of the bandgap energy in ZnS. The results are compared with those found for other tetrahedrally coordinated semiconductors.

cond-mat.mtrl-sci↗