arXiv subjects

R. Maingi

Publications and source records attributed to R. Maingi.

5 recordsLinked to original sources

arXiv2026

Impurity-driven turbulence opens a pathway to ELM-free operation and enhanced pedestal stability in tokamaks

Edge-localized modes (ELMs) impose severe transient heat, and particle loads on plasma-facing components, posing a critical challenge for steady-state operation of tokamak fusion reactors. Existing ELM control techniques either rely on externally applied perturbations or operate within narrow parameter windows, raising concerns for reactor scalability. Here we demonstrate that controlled injection of a low-Z impurity can fundamentally modify pedestal transport and stability, enabling access to long ELM-free periods through impurity-driven turbulence. Using boron (B) powder injection in the DIII-D tokamak, we observe a progressive reduction of ELM frequency, culminating in long ELM-free phases. Pedestal stability analysis reveals a pronounced decoupling of peeling and ballooning stability boundaries at moderate B injection levels, opening a stability channel toward super-high confinement operation. At higher injection rates, long (~300 ms) ELM-free periods are achieved. Fluctuation measurements show that B injection selectively enhances low-frequency pedestal turbulence, increasing inter-ELM particle transport and regulating pedestal gradients. The establishment of a feedback loop between turbulence, particle transport, and the resulting modification of pedestal conditions, indicated by the observed hysteresis loop in the evolution of density fluctuations in response to the B injection rate, is presented.

physics.plasm-ph↗

arXiv2019

Hollow pellet injection for magnetic fusion

Precise delivery of mass to burning plasmas is a problem of growing interest in magnetic fusion. The answers to how much mass is necessary and sufficient can vary depending on parameters such as the type of atoms involved, the type of applications, plasma conditions, mass injector, and injection timing. Motivated by edge localized mode (ELM) control in H-mode plasmas, disruption mitigation and other applications in magnetic fusion, we report progress and new possibilities in mass delivery based on hollow pellets. Here, a hollow pellet refers to a spherical shell mass structure with a hollow core. Based on an empirical model of pellet ablation, coupled with BOUT++ simulations of ELM triggering threshold, hollow pellets are found to be attractive in comparison with solid spheres for ELM control. By using hollow pellets, it is possible to tailor mass delivery to certain regions of edge plasmas while minimizing core contamination and reducing the total amount of mass needed. We also include experimental progress in mass delivery experiments, in-situ diagnostics and hollow pellet fabrication, and emphasize new experimental possibilities for ELM control based on hollow pellets. A related application is the disruption mitigation scheme using powder encapsulated inside hollow shells. Further experiments will also help to resolve known discrepancies between theoretical predictions and experiments in using mass injection for ELM control and lead to better predictive models for ELM stability and triggering.

physics.plasm-ph↗

arXiv2017

Gyrokinetic projection of the divertor heat-flux width from present tokamaks to ITER

The XGC1 edge gyrokinetic code is used for a high fidelity prediction for the width of the heat-flux to divertor plates in attached plasma condition. The simulation results are validated against the empirical scaling $λ_q \propto B_P^{-γ}$ obtained from present tokamak devices, where $λ_q$ is the divertor heat-flux width mapped to the outboard midplane and $γ_q=1.19$ as defined by T. Eich et al. [Nucl. Fusion 53 (2013) 093031], and $B_P$ is the magnitude of the poloidal magnetic field at outboard midplane separatrix surface. This empirical scaling predicts $λ_q \leq 1mm$ when extrapolated to ITER, which would require operation with very high separatrix densities $(n_{sep}/n_{Greenwald} > 0.6)$ in the Q=10 scenario to achieve semi-detached plasma operation and high radiative fractions leading to acceptable divertor power fluxes. XGC1 predicts, however, that $λ_q$ for ITER is over 5 mm, suggesting that operation in the ITER Q=10 scenario with acceptable divertor power loads could be obtained over a wider range of plasma separatrix densities and radiative fractions. The physics reason behind this difference is, according to the XGC1 results, that while the ion magnetic drift contribution to the divertor heat-flux width is wider in the present tokamaks, the turbulent electron contribution is wider in ITER. A high current C-Mod discharge is found to be in a mixed regime: While the heat-flux width by the ion neoclassical magnetic drift is still wider than the turbulent electron heat-flux width, the heat-flux magnitude is dominated by the narrower electron heat-flux.

physics.plasm-ph↗

arXiv2017

Total Fluid Pressure Imbalance in the Scrape-Off Layer of Tokamak Plasmas

Simulations using the fully kinetic neoclassical code XGCa were undertaken to explore the impact of kinetic effects on scrape-off layer (SOL) physics in DIII-D H-mode plasmas. XGCa is a total-f, gyrokinetic code which self-consistently calculates the axisymmetric electrostatic potential and plasma dynamics, and includes modules for Monte Carlo neutral transport. Previously presented XGCa results showed several noteworthy features, including large variations of ion density and pressure along field lines in the SOL, experimentally relevant levels of SOL parallel ion flow (Mach number~0.5), skewed ion distributions near the sheath entrance leading to subsonic flow there, and elevated sheath potentials [R.M. Churchill, Nucl. Mater. & Energy, submitted]. In this paper, we explore in detail the question of pressure balance in the SOL, as it was observed in the simulation that there was a large deviation from a simple total pressure balance (the sum of ion and electron static pressure plus ion inertia). It will be shown that both the contributions from the ion viscosity (driven by ion temperature anisotropy) and neutral source terms can be substantial, and should be retained in the parallel momentum equation in the SOL, but still falls short of accounting for the observed fluid pressure imbalance in the XGCa simulation results.

physics.plasm-ph↗

arXiv2009

High flux expansion divertor studies in NSTX

High flux expansion divertor studies have been carried out in the National Spherical Torus Experiment using steady-state X-point height variations from 22 to 5-6 cm. Small-ELM H-mode confinement was maintained at all X-point heights. Divertor flux expansions from 6 to 26-28 were obtained, with associated reduction in X-point connection length from 5-6 m to 2 m. Peak divertor heat flux was reduced from 7-8 MW/m$^2$ to 1-2 MW/m$^2$. In low X-point configuration, outer strike point became nearly detached. Among factors affecting deposition of parallel heat flux in the divertor, the flux expansion factor appeared to be dominant

physics.plasm-ph↗