arXiv subjects

R. P. Loreto

Publications and source records attributed to R. P. Loreto.

7 recordsLinked to original sources

arXiv2024

Efficient electronic cooling above 2 K by niobium-based superconducting tunnel junctions

Replacing the bulky cryoliquid-based cooling stages of cryoenabled instruments by chip-scale refrigeration is envisioned to disruptively reduce the system size similar to microprocessors did for computers. Electronic refrigerators based on superconducting tunnel junctions have been anticipated to provide a solution, but reaching the necessary above the 1-K operation temperature range has remained a goal out of reach for several decades. We show efficient electronic refrigeration by Al-AlO$_x$-Nb superconducting tunnel junctions starting from bath temperatures above 2 K. The junctions can deliver electronic cooling power up to approximately mW/mm$^2$, which enables us to demonstrate tunnel-current-driven electron temperature reduction from 2.4 K to below 1.6 K (34% relative cooling) against the phonon bath. Our work shows that the key material of integrated superconducting circuits - niobium - enables powerful cryogenic refrigerator technology. This result is a prerequisite for practical cryogenic chip-scale refrigerators and, at the same time, it introduces a new electrothermal tool for quantum heat-transport experiments.

cond-mat.supr-con↗

arXiv2019

Naked-eye visualization of geometric frustration effects in macroscopic spin ices

We study planar rectangular-like arrays composed by macroscopic dipoles (magnetic bars with size around a few centimeters) separated by lattice spacing a and b along each direction. Physical behavior of such macroscopic artificial spin ice (MASI) systems are shown to agree much better with theoretical prediction than their micro- or nano-scaled counterparts, making MASI "almost ideal prototypes" for readily naked-eye visualization of geometrical frustration effects.

cond-mat.mes-hall↗

arXiv2018

Experimental and theoretical evidences for the ice regime in planar artificial spin ices

In this work, we explore a kind of geometrical effect in the thermodynamics of artificial spin ices (ASI). In general, such artificial materials are athermal. Here, We demonstrate that geometrically driven dynamics in ASI can open up the panorama of exploring distinct ground states and thermally magnetic monopole excitations. It is shown that a particular ASI lattice will provide a richer thermodynamics with nanomagnet spins experiencing less restriction to flip precisely in a kind of rhombic lattice. This can be observed by analysis of only three types of rectangular artificial spin ices (RASI). Denoting the horizontal and vertical lattice spacings by a and b, respectively, then, a RASI material can be described by its aspect ratio $γ$=a/b. The rhombic lattice emerges when $γ$=$\sqrt{3}$. So, by comparing the impact of thermal effects on the spin flips in these three appropriate different RASI arrays, it is possible to find a system very close to the ice regime.

cond-mat.mtrl-sci↗

arXiv2018

Tuning magnetic charge population and mobility in unidirectional array of nanomagnets as a function of lattice parameters

Sets of nanomagnets are often utilized to mimic cellular automata in design of nanomagnetic logic devices or frustration and emergence of magnetic charges in artificial spin ice systems. in previous work we showed that unidirectional arrangement of nanomagnets can behave as artificial spin ice, with frustration arising from second neighbor dipolar interaction, and present good magnetic charge mobility due to the low string tension among charges. Here, we present an experimental investigation of magnetic charge population and mobility in function of lateral and longitudinal distance among nanomagnets. Our results corroborate partially the theoretical predictions, performed elsewhere by emergent interaction model, could be useful in nanomagnet logic devices design and brings new insights about the best design for magnetic charge ballistic transport under low external magnetic field with magnetic charge mobility tunning for application in magnetricity.

cond-mat.mes-hall↗

arXiv2017

Dirac-Surface-State-Dominated Spin to Charge Current Conversion in the Topological Insulator $(Bi_{0.22}Sb_{0.78})_2Te_3$ Films at Room Temperature

We report the spin to charge current conversation in an intrinsic topological insulator (TI) $(Bi_{0.22}Sb_{0.78})_2Te_3$ film at room temperature. The spin currents are generated in a thin layer of permalloy (Py) by two different processes, spin pumping (SPE) and spin Seebeck effects (SSE). In the first we use microwave-driven ferromagnetic resonance of the Py film to generate a SPE spin current that is injected into the TI $(Bi_{0.22}Sb_{0.78})_2Te_3$ layer in direct contact with Py. In the second we use the SSE in the longitudinal configuration in Py without contamination by the Nernst effect made possible with a thin NiO layer between the Py and $(Bi_{0.22}Sb_{0.78})_2Te_3$ layers. The spin-to-charge current conversion is attributed to the inverse Edelstein effect (IEE) made possible by the spin-momentum locking in the electron Fermi contours due to the Rashba field. The measurements by the two techniques yield very similar values for the IEE parameter, which are larger than the reported values in the previous studies on topological insulators.

cond-mat.mes-hall↗

arXiv2017

Creation,transport and detection of imprinted magnetic solitons stabilized by spin-polarized current

With the recent proposition of skyrmion utilization in racetrack memories at room temperature, skyrmionics has become a very attractive field. However, for the stability of skyrmions, it is essential to incorporate the Dzyaloshinskii-Moriya interaction (DMI) and the out-of-plane magnetic field into the system. In this work, we explore a system without these interactions. First, we propose a controlled way for the creation of magnetic skyrmions and skyrmioniums imprinted on a ferromagnetic nanotrack via a nanopatterned nanodisk with the magnetic vortex state. Then we investigate the detachment of the imprinted spin textures from the underneath of the nanodisk, as well as its transport by the spin-transfer torque imposed by spin-polarized current pulses applied in the nanotrack. A prominent feature of the moving imprinted spin texture is that its topological number Q is oscillating around the averaged value of Q=0 as if it is a resonant state between the skyrmions with Q= +/- 1 and the bubble with Q=0. We may call it a resonant magnetic soliton (RMS). A RMS moves along a straight line since it is free from the skyrmion Hall effect. In our studied device, the same electrodes are employed to realize the imprinted spin texture detachment and its transport. In addition, we have investigated the interaction between the RMS and a magnetic tunnel junction sensor, where the passing of the RMS in the nanotrack can be well detected. Our results would be useful for the development of novel spintronic devices based on moveable spin textures.

cond-mat.mes-hall↗

arXiv2014

Realization of magnetic monopoles current in an artificial spin ice device: A step towards magnetronics

Magnetricity- the magnetic equivalent of electricity- was recently verified experimentally for the first time. Indeed, just as the stream of electric charges produces electric current, emergent magnetic monopoles have been observed to roam freely (generating magnetic current) in geometrically frustrated magnets known as spin ice. However, this is realized only by considering extreme physical conditions as a single crystal of spin ice has to be cooled to a temperature of $0.36 K$. Candidates to overcome this difficulty are artificial analogues of spin ice crystals, the so-called artificial spin ices. Here we show that, by tuning geometrical frustration down, a peculiar type of these artificial systems is an excellent candidate. We produce this material and experimentally observe the emergent monopoles; then, we calculate the effects of external magnetic fields, illustrating how to generate controlled magnetic currents. This potential nano-device for use in magnetronics can be practical even at room temperature and the relevant parameters (such as magnetic charge strength etc) for developing this technology can be tuned at will.

cond-mat.mes-hall↗