arXiv subjects

R. R. Thomson

Publications and source records attributed to R. R. Thomson.

7 recordsLinked to original sources

arXiv2026

NAIR-APREXIS: Enabling photonics-based instruments for long-baseline interferometry and integral-field spectroscopy

The NAIR project -- Novel Astronomical Instrumentation based on photonic light Reformatting -- aims at advancing photonic technologies for infrared long-baseline interferometry and precision spectroscopy. The rapid development of astrophotonics over the past decade has opened new pathways for astronomical instrumentation with unprecedented capabilities. We present results from NAIR that demonstrate the potential of the ultrafast-laser inscription (ULI) technique for fabricating remapping devices for a range of applications. We developed a single-mode integrated-optics astronomical K-band beam combiner, which we successfully tested on-sky, although using only one single baseline of the CHARA Array. Across several observing campaigns, the prototype exhibited excellent stability, achieving 1% precision on the interferometric visibilities and a total on-sky throughput >40%, with an achieved limiting magnitude of K~5 using the 1-m meter telescopes of CHARA and without external fringe tracking. We are also developing an integral field unit (IFU) designed for exoplanet detection and characterisation. This is due to be tested with MagAO-X in Chile in 2027. The IFU is based upon astrophotonic fiber technologies - two-photon-polymerized (TPP) lenslets, a custom multi-core fiber, and a ULI reformatter. We discuss our efforts to achieve contrasts of 1e-3 between adjacent spaxels whilst retaining throughput of >50%. Finally, we discuss the work we are doing developing the next generation of astrophotonic technologies, including TPP micro-dispersers designed for low resolving power, high transmission applications. We achieve R~30 in a sub-mm package, showing viability for future use. These results emphasize the versatility and simplicity of integrated photonic approaches as a major advance in optical technologies for astronomical instrumentation.

astro-ph.IM↗

arXiv2022

High resolution TCSPC imaging of diffuse light with a one-dimensional SPAD array scanning system

We report a time-resolved single photon counting (TCSPC) imaging system based on a line-scanning architecture. The system benefits from the high fill-factor, active area, and large dimension of an advanced CMOS single photon avalanche diode (SPAD) array line-sensor. A two-dimensional image is constructed using a moving mirror to scan the line-sensor field-of-view (FOV) across the target, to enable the efficient acquisition of a two-dimensional 0.26 Mpixel TCSPC image. We demonstrate the capabilities of the system for TCSPC imaging and locating objects obscured in scattering media - specifically to locate a series of discrete point sources of light along an optical fibre submerged in a highly scattering solution. We demonstrate that by selectively imaging using early arriving photons which have undergone less scattering than later arriving photons, our TCSPC imaging system is able to locate the position of discrete point sources of light than a non-time-resolved imaging system.

physics.ins-det↗

arXiv2018

Simulation and Optimization of an Astrophotonic Reformatter

Image slicing is a powerful technique in astronomy. It allows the instrument designer to reduce the slit width of the spectrograph, increasing spectral resolving power whilst retaining throughput. Conventionally this is done using bulk optics, such as mirrors and prisms, however more recently astrophotonic components known as photonic lanterns (PLs) and photonic reformatters have also been used. These devices reformat the multi-mode (MM) input light from a telescope into single-mode (SM) outputs, which can then be re-arranged to suit the spectrograph. The photonic dicer (PD) is one such device, designed to reduce the dependence of spectrograph size on telescope aperture and eliminate modal noise. We simulate the PD, by optimising the throughput and geometrical design using Soapy and BeamProp. The simulated device shows a transmission between 8 and 20 %, depending upon the type of adaptive optics (AO) correction applied, matching the experimental results well. We also investigate our idealised model of the PD and show that the barycentre of the slit varies only slightly with time, meaning that the modal noise contribution is very low when compared to conventional fibre systems. We further optimise our model device for both higher throughput and reduced modal noise. This device improves throughput by 6.4 % and reduces the movement of the slit output by 50%, further improving stability. This shows the importance of properly simulating such devices, including atmospheric effects. Our work complements recent work in the field and is essential for optimising future photonic reformatters.

astro-ph.IM↗

arXiv2017

Ballistic and snake photon imaging for locating optical endomicroscopy fibres

We demonstrate determination of the location of the distal-end of a fibre-optic device deep in tissue through the imaging of ballistic and snake photons using a time resolved single-photon detector array. The fibre was imaged with centimetre resolution, within clinically relevant settings and models. This technique can overcome the limitations imposed by tissue scattering in optically determining the in vivo location of fibre-optic medical instruments.

physics.med-ph↗

arXiv2015

Development of integrated mode reformatting components for diffraction-limited spectroscopy

We present the results of our work on developing fully integrated devices (photonic dicers) for reformatting multimode light to a diffraction limited pseudo-slit. These devices can be used to couple a seeing-limited telescope point-spread-function to a spectrograph operating at the diffraction limit, thus enabling compact, high-resolution spectrographs that are free of modal-noise.

physics.optics↗

arXiv2015

The Photonic Lantern

Photonic lanterns are made by adiabatically merging several single-mode cores into one multimode core. They provide low-loss interfaces between single-mode and multimode systems where the precise optical mapping between cores and individual modes is unimportant.

physics.optics↗

arXiv2012

Ultrafast Laser Inscription of a 121-Waveguide Fan-Out for Astrophotonics

Using ultrafast laser inscription, we report the fabrication of a prototype three-dimensional 121-waveguide fan-out device capable of reformatting the output of a 120 core multicore fiber (MCF) into a one-dimensional linear array. When used in conjunction with an actual MCF, we demonstrate that the reformatting function using this prototype would result in an overall throughput loss of approximately 7.0 dB. However, if perfect coupling from the MCF into the fan-out could be achieved, the reformatting function would result in an overall loss of only approximately 1.7 dB. With adequate development, similar devices could efficiently reformat the output of so-called "photonic lanterns" fabricated using highly multicore fibers.

physics.optics↗