SearcharxivSearch

arXiv subjects

R. Rai

Publications and source records attributed to R. Rai.

At least 19 recordsLinked to original sources

CASPER: Interpretable ResNet based Classifier with FastShap Explainer for Gravitational Wave Detection

Traditional matched filtering has been the standard for Gravitational waves (GW) detection ever since LIGO was established, even though it requires pre-computed waveform templates and provides no accounts of information about which signal drove the decision of classification. Deep-learning alternatives showed competitive sensitivity, but system biasesincluding class overlap, imbalanced class weighting, limited sample variation, and traintest mismatchcontinue to cause problems with generalisation in real detector noise. We introduce CASPER-Classification with Attribution via ShaPlEy in Residual neural networks, an end-to-end pipeline combining residual convolutional neural network (CNN) classifier with a FastSHAP explainer. 260 distinct events from the Gravitational Wave open Science Centre were fetched across SNR range of 7-42 from both H1 and L1 detectors with no synthetic augmentation. The classifier achieves AUC (Area Under Curve) of 91% across the model with a low false alarm rate. Focal Loss and Platt Calibration were used to improve decision boundary and generalisation. FastSHAP attribution maps recover the complete chirp morphology and provides detailed maps for a visual interpretation of the decision. The complete pipeline contains fewer parameters than standard deep learning models and requires no hardware except a standard CPU making our model an effective lightweight pipeline for Gravitational Wave Detection under real life conditions.

gr-qc

Design of a high voltage delivery system for noble liquid time projection chambers

Noble liquid time projection chambers (TPCs) are a leading technology in the detection of ionizing radiation, particularly in applications such as accelerator neutrino physics, dark matter detection, and neutrinoless double beta decay. This paper addresses the design considerations for implementing stable high voltage (HV) systems within large noble liquid TPCs, with a focus on the nEXO experiment. Utilizing insights from prior HV research and experimental investigations, we outline factors influencing HV stability and discuss design choices to improve stability and prevent electrical discharges. A novel HV delivery system concept is presented, tailored for the nEXO TPC, which incorporates these design considerations while also meeting the stringent radiopurity requirements of the nEXO neutrinoless double beta decay search. These design considerations and their specific implementation towards a HV delivery system offer guidance to future experiments applying high voltage in noble liquid environments.

physics.ins-det

Nanodiamond photocathodes for MPGD-based single photon detectors

This study investigates the suitability of Hydrogenated NanoDiamond (HND) materials as an alternative for CsI in MPGD-based photon detectors. The research focuses on characterizing HND photocathodes coupled with THGEM + Micromegas-based detectors. The HND grains were prepared via hydrogenation and stored in water for more than two years. They were then coated on PCB discs or THGEMs using a pulsed spray technique. The resulting quantum efficiency (QE) values (~4% at 122 nm) were found to be within a factor of 10 of the best freshly hydrogenated samples reported in the literature ( ~40% at 120 nm). The robustness of reflective HND photocathodes against ion bombardment was measured to be about 10 times larger than the corresponding CsI one after the same charge accumulation. Furthermore, THGEM characterization indicates minimal alteration in response after HND coatings. These results suggest that HND holds potential as a more robust photocathode for gaseous detectors, offering improved performance in single-photon detection applications.

physics.ins-det

Ultra-pure Nickel for Structural Components of Low-Radioactivity Instruments

The next generation of rare-event search experiments in nuclear and particle physics demand structural materials combining exceptional mechanical strength with ultra-low levels of radioactive contamination. This study evaluates chemical vapor deposition (CVD) nickel as a candidate structural material for such applications. Manufacturer-supplied CVD Ni grown on aluminum substrates underwent tensile testing before and after welding alongside standard Ni samples. CVD Ni exhibited a planar tensile strength of ~600 MPa, significantly surpassing standard nickel. However, welding and heat treatment were found to reduce the tensile strength to levels comparable to standard Ni, with observed porosity in the welds likely contributing to this reduction. Material assay via inductively coupled plasma mass spectrometry (ICP-MS) employing isotope-dilution produced measured bulk concentration of 232-Th, 238-U, and nat-K at the levels of ~70 ppq, <100 ppq, and ~900 ppt, respectively, which is the lowest reported in nickel. Surface-etch profiling uncovered higher concentrations of these contaminants extending ~10 micrometer beneath the surface, likely associated with the aluminum growth substrate. The results reported are compared to the one other well documented usage of CVD Ni in a low radioactive background physics research experiment and a discussion is provided on how the currently reported results may arise from changes in CVD fabrication or testing process. These results establish CVD Ni as a promising low-radioactivity structural material, while outlining the need for further development in welding and surface cleaning techniques to fully realize its potential in large-scale, low radioactive background rare-event search experiments.

nucl-ex

Sensitivity of nEXO to $^{136}$Xe Charged-Current Interactions: Background-free Searches for Solar Neutrinos and Fermionic Dark Matter

We study the sensitivity of nEXO to solar neutrino charged-current interactions, $\nu_e + ^{136}$Xe$\rightarrow ^{136}$Cs$^* + e^-$, as well as analogous interactions predicted by models of fermionic dark matter. Due to the recently observed low-lying isomeric states of $^{136}$Cs, these interactions will create a time-delayed coincident signal observable in the scintillation channel. Here we develop a detailed Monte Carlo of scintillation emission, propagation, and detection in the nEXO detector to model these signals under different assumptions about the timing resolution of the photosensor readout. We show this correlated signal can be used to achieve background discrimination on the order of $10^{-9}$, enabling nEXO to make background-free measurements of solar neutrinos above the reaction threshold of 0.668 MeV. We project that nEXO could measure the flux of CNO solar neutrinos with a statistical uncertainty of 25%, thus contributing a novel and competitive measurement towards addressing the solar metallicity problem. Additionally, nEXO could measure the mean energy of the $^7$Be neutrinos with a precision of $\sigma \leq 1.5$ keV and could determine the survival probability of $^{7}$Be and $pep$ solar $\nu_e$ with precision comparable to state-of-the-art. These quantities are sensitive to the Sun's core temperature and to non-standard neutrino interactions, respectively. Furthermore, the strong background suppression would allow nEXO to search for for charged-current interactions of fermionic dark matter in the mass range $m_\chi$ = $0.668$-$7$ MeV with a sensitivity up to three orders of magnitude better than current limits.

nucl-ex

Ultra-sensitive radon assay using an electrostatic chamber in a recirculating system

Rare event searches such as neutrinoless double beta decay and Weakly Interacting Massive Particle detection require ultra-low background detectors. Radon contamination is a significant challenge for these experiments, which employ highly sensitive radon assay techniques to identify and select low-emission materials. This work presents the development of ultra-sensitive electrostatic chamber (ESC) instruments designed to measure radon emanation in a recirculating gas loop, for future lower background experiments. Unlike traditional methods that separate emanation and detection steps, this system allows continuous radon transport and detection. This is made possible with a custom-built recirculation pump. A Python-based analysis framework, PyDAn, was developed to process and fit time-dependent radon decay data. Radon emanation rates are given for various materials measured with this instrument. A radon source of known activity provides an absolute calibration, enabling statistically-limited minimal detectable activities of 20 $\mu$Bq. These devices are powerful tools for screening materials in the development of low-background particle physics experiments.

physics.ins-det

Study of nanodiamond photocathodes for MPGD-based detectors of single photons

The proposed new Electron-Ion Collider poses a technical and intellectual challenge for the detector design to accommodate the long-term diverse physics goals envisaged by the program. This requires a 4{\pi} detector system capable of reconstructing the energy and momentum of final state particles with high precision. The Electron-Ion Collider also requires identification of particles of different masses over a wide momentum range. A diverse spectrum of Particle Identification detectors has been proposed. Of the four types of detectors for hadron identification, three are based on Ring Imaging Cherenkov Counter technologies, and one is realized by the Time of Flight method. The quest for a novel photocathode, sensitive in the far vacuum ultra violet wavelength range and more robust than cesium iodide, motivated an R&D programme to explore nano-diamond (ND) based photocathodes, started by a collaboration between INFN and CNR Bari and INFN Trieste. Systematic measurements of the photo emission in different Ar-CH4 and Ar-CO2 gas mixtures with various types of ND powders and Hydrogenated ND (H-ND) powders are reported. A first study of the response of THGEMs coated with different photocathode materials is presented. The progress of this R&D programme and the results obtained so far by these exploratory studies are described.

physics.ins-det

Progress in coupling MPGD-based Photon Detectors with Nanodiamond Photocathodes

The next generation of gaseous photon detectors is requested to overcome the limitations of the available technology, in terms of resolution and robustness. The quest for a novel photocathode, sensitive in the far vacuum ultra violet wavelength range and more robust than present ones, motivated an R&D programme to explore nanodiamond based photoconverters, which represent the most promising alternative to cesium iodine. A procedure for producing the novel photocathodes has been defined and applied on THGEMs samples. Systematic measurements of the photo emission in different Ar/CH4 and Ar/CO2 gas mixtures with various types of nanodiamond powders have been performed. A comparative study of the response of THGEMs before and after coating demonstrated their full compatibility with the novel photocathodes.

physics.ins-det

Effect of Spin Fluctuations on Magnetoresistance and Anomalous Hall Effect in the Chiral Magnet Co8Zn8Mn4

The beta Mn type Co-Zn-Mn alloys have seized significant attention due to their ability to host skyrmions at room temperature. Here we analyse the unconventional magneto-transport properties of Co8Zn8Mn4 single crystals with a Curie temperature of 275 K. A negative magnetoresistance is obtained over a wide temperature range of 50K to 300K. The deviation of the isothermal magnetoresistance (MR) curves from linearity to non-linearity as one approaches higher temperatures points towards the transition from the dominance of magnons to spin fluctuations. In the paramagnetic phase, the change in the shape of the MR curve has been explained using the Khosla and Fischer model. The relationship between the anomalous Hall effect (AHE) and longitudinal resistivity reveals the dominance of the skew-scattering mechanism, which is inexplicable based on the theories of semi-classical magneto-transport. We experimentally determine that the spin fluctuation is the source of the skew-scattering mechanism in Co8Zn8Mn4. In general skew-scattering mechanisms predominate in compounds with high conductivity, but our findings demonstrate that this is not always the case and that other aspects also require equal consideration. Our work throws new light on the predominant scattering mechanism in chiral magnets with skyrmionics phase at low conductivity.

cond-mat.mtrl-sci

Optical linear-nonlinear and dispersion parameters of thermally evaporated SnS thin films as absorber material for solar cells

In this manuscript, we report the results of optical properties of SnS thin films, deposited on FTO coated glass substrates at room temperature by thermal evaporation technique. In addition, the effect of film thickness on the optical behavior of FTO/SnS is analyzed and obtained results are compared with data of SnS films grown on glass and ITO substrates. Our study indicates that the properties of SnS film are independent of the substrate material. Further, the influence of the film thickness on the other optical parameters including, linear and third order nonlinear optical constants and dispersion parameters have also been investigated using the transmission, reflection, and absorption spectra. It is found that the optical band gap decreases from 2.07 to 1.30 eV with increase in SnS film thickness, whereas the refractive index increases with increasing thickness. Additionally, the oscillator energy, and the dispersion energy are estimated using WempleDiDomenico approach. The dispersion energies are in the range of 7.20 to 4.59 eV, while the oscillator energies of the thin films are in the range of 5.49 to 2.24 eV. Moreover, the nonlinear refractive index, and optical susceptibility are calculated by using the empirical relation of Tichy and Ticha. The volume of data suggests optical properties of SnS thin films are strongly dependent on film thickness.

cond-mat.mtrl-sci

Crystal and Magnetic Structure of Polar Oxide HoCrWO$_6$

Polar magnetic oxide HoCrWO$_6$ is synthesized and its crystal structure, magnetic structure, and thermodynamic properties are investigated. HoCrWO$_6$ forms the polar crystal structure (space group Pna2$_1$ (#33)) due to the cation ordering of W$^{6+}$ and Cr$^{3+}$. There is an antiferromagnetic transition at TN = 24.5 K along with the magnetic entropy change (~5 J.Kg.$^{-1}$K$^{-1}$ at 70 kOe). Neutron diffraction measurement indicates that both Cr and Ho sublattices are ordered with the moment of 2.32(5)$μ_B$ and 8.7(4)$μ_B$ at 2 K, respectively. While Cr forms A-type collinear antiferromagnetic (AFM) structure with magnetic moment along the $b$ axis, Ho sublattice orders in a non-coplanar AFM arrangement. A comparison with isostructural DyFeWO$_6$ and DyCrWO$_6$ indicates that the magnetic structure of this family of compounds is controlled by the presence or absence of eg electrons in the transition metal sublattice.

cond-mat.mtrl-sci

Humidity effects on evolution of CsI thin Films: Fractal studies of rough surfaces

The present work investigates the morphological, micro-structural, compositional and fractal analysis for CsI thin films in case of "as-deposited" and "1 hour humid air aged". The variation of grain sizes obtained from transmission electron microscopy (TEM) technique are found to be in the range of ~ 313 nm to ~ 1058 nm. The average grain size is found to increase after exposing to humidity. The experimental values of interplanner spacing are found to be less than the standard value which signifies that a compressive stress is acting in the film. The elemental compositions of CsI film has been investigated by the means of energy dispersive X-ray spectroscopy (EDAX) technique. The atomic percentage of Cs:I (1:1) is found to be increased by a factor of two after exposing to humidity. The surface morphology of CsI thin films is analyzed by the atomic force microscopy (AFM) for both cases. The fractal analysis is performed on the AFM micrographs. The autocorrelation function and height-height correlation function is used to study the correlation properties of surface and roughness exponent. It is found that the fractal dimension is affected after exposing to humidity.

physics.ins-det

Growth evolution of self-affine thermally evaporated KBr thin films: A fractal assessment

In this article, fractal concepts were used to explore the thermally evaporated potassium bromide thin films of different thicknesses 200, 300, and 500 nm respectively; grown on aluminium substrates at room temperature. The self-affine or self similar nature of growing surfaces was investigated by autocorrelation function and obtained results are compared with the morphological envelope method. Theoretical estimations revealed that the global surface parameters such as, interface width and lateral correlation length are monotonically decreased with increasing film thickness. Also, from height profile and A-F plots, it has been perceived that irregularity/ complexity of growing layers was significantly influenced by thickness. On the other hand, the fractal dimension and local roughness exponent, estimated by height-height correlation function, do not suggest such dependency.

cond-mat.mtrl-sci

X-ray diffraction line profile analysis of KBr thin films

In the present work, the microcrystalline characteristics of KBr thin films have been investigated by evaluating the breadth of diffraction peak. The Williamson-Hall, the Size-Strain Plot and the single line Voigt methods are employed to deconvolute the finite crystallite size and microstrain contribution from the broaden X-ray profile. The texture coefficient and dislocation density have been determined along each diffraction peak. Other relevant physical parameters such as stress, Young's modulus and energy density are also estimated using Uniform Stress-Deformation and Uniform Deformation Energy Density approximation of Williamson-Hall method.

cond-mat.mtrl-sci

Correlation between photoemissive and morphological properties of KBr thin film photocathodes

In the present work, the morphological properties of KBr photocathodes are correlated with their photoemissive behaviour using a combination of analyzing techniques including SEM, TEM and AFM. From morphological studies, it is observed that KBr films have granular characteristics with varied average grain size and grain density. Structure and orientation of individual grains have been investigated by selected area electron diffraction technique and found to be the crystalline in nature with a face centered cubic structure. It is evident from the AFM analysis that the root mean square roughness and maximum area peak height have been decreased with the deposition of more KBr layers. The photoemission studies reveal that the resultant photocurrent is enhanced with increasing film thickness and it is directly related to the surface area coverage and grain density.

physics.ins-det

Optical and structural properties of CsI thin film photocathode

In the present work performance of cesium iodide thin film photocathode is studied in detail. The optical absorbance of cesium iodide thin films have been analyzed in the spectral range of 190 nm to 900 nm. The optical band gap energy of 500 nm thick cesium iodide film is calculated using Tauc plot from absorbance data. Refractive index is estimated from envelope plot of transmittance data using Swanepoel's method. Absolute quantum efficiency measurement has been carried out in the wavelength range of 150 nm to 200 nm. Crystallographic nature and surface morphology are investigated by X-ray diffraction, transmission electron microscopy and atomic force microscopy techniques. In addition, elemental composition result gained by energy dispersive X-ray analysis is also reported in the present work.

cond-mat.mtrl-sci

Effect of humid air exposure on photoemissive and structural properties of KBr thin film photocathode

We have investigated the influence of water molecule absorption on photoemissive and structural properties of potassium bromide (KBr) thin film photocathode under humid air exposure at relative humidity (RH) 65%. It is evident from photoemission measurement that the photoelectron yield of KBr photocathode is degraded exponentially with humid air exposed time. Structural studies of the "as-deposited" and "humid air aged" films reveal that there is no effect of RH on film's crystalline face centered cubic (fcc) structure. However, the average crystallite size of "humid air exposed film" KBr film has been increased as compared to "as-deposited". In addition, topographical properties of KBr film are also examined by means of scanning electron microscope (SEM), transmission electron microscope (TEM) and atomic force microscope (AFM) and it is observed that granular characteristic of film has been altered, even for short exposure to humid air.

physics.ins-det

Photoemission and optical constant measurements of Cesium Iodide thin film photocathode

The performance of cesium iodide as a reflective photocathode is presented. The absolute quantum efficiency of a 500 nm thick film of cesium iodide has been measured in the wavelength range 150 nm to 200 nm. The optical absorbance has been analyzed in the wavelength range 190 nm to 900 nm and the optical band gap energy has been calculated. The dispersion properties were determined from the refractive index using an envelope plot of the transmittance data. The morphological and elemental film composition have been investigated by atomic force microscopy and X-ray photo-electron spectroscopy techniques.

physics.ins-det