SearcharxivSearch

arXiv subjects

R. S. Decca

Publications and source records attributed to R. S. Decca.

At least 19 recordsLinked to original sources

Probing the screening of the Casimir interaction with optical tweezers

We measure the colloidal interaction between two silica microspheres in aqueous solution in the distance range from $0.2\,μ$m to $0.5\,μ$m with the help of optical tweezers. When employing a sample with a low salt concentration, the resulting interaction is dominated by the repulsive double-layer interaction which is fully characterized. The double-layer interaction is suppressed when adding $0.22\,$M of salt to our sample, thus leading to a purely attractive Casimir signal. When analyzing the experimental data for the potential energy and force, we find good agreement with theoretical results based on the scattering approach. At the distance range probed experimentally, the interaction arises mainly from the unscreened transverse magnetic contribution in the zero-frequency limit, with nonzero Matsubara frequencies providing a negligible contribution. In contrast, such unscreened contribution is not included by the standard theoretical model of the Casimir interaction in electrolyte solutions, in which the zero-frequency term is treated separately as an electrostatic fluctuational effect. As a consequence, the resulting attraction is too weak in this standard model, by approximately one order of magnitude, to explain the experimental data. Overall, our experimental results shed light on the nature of the thermal zero-frequency contribution and indicate that the Casimir attraction across polar liquids has a longer range than previously predicted.

quant-ph

Double-layer force suppression between charged microspheres

In this paper we propose a protocol to suppress double-layer forces between two microspheres immersed in a dielectric medium, being one microsphere metallic at a controlled potential ψM and the other a charged one either metallic or dielectric. The approach is valid for a wide range of distances between them. We show that, for a given distance between the two microspheres, the double-layer force can be totally suppressed by simply tuning ψM up to values dictated by the linearized Poisson-Boltzmann equation. Our key finding is that such values can be substantially different from the ones predicted by the commonly used proximity force approximation (PFA), also known as Derjaguin approximation, even in situations where the latter is expected to be accurate. The proposed procedure can be used to suppress the double-layer interaction in force spectroscopy experiments, thus paving the way for measurements of other surface interactions, such as Casimir dispersion forces.

physics.class-ph

Isoelectronic determination of the thermal Casimir force

Differential force measurements between spheres coated with either nickel or gold and rotating disks with periodic distributions of nickel and gold are reported. The rotating samples are covered by a thin layer of titanium and a layer of gold. While titanium is used for fabrication purposes, the gold layer (nominal thicknesses of 21, 37, 47 and 87 nm) provides an isoelectronic environment, and is used to nullify the electrostatic contribution but allow the passage of long wavelength Casimir photons. A direct comparison between the experimental results and predictions from Drude and plasma models for the electrical permittivity is carried out. In the models the magnetic permeability of nickel is allowed to change to investigate its effects. Possible sources of errors, both in the experimental and theoretical sides, are taken into account. It is found that a Drude response with magnetic properties of nickel taken into account is unequivocally ruled out. The full analysis of the data indicates that a dielectric plasma response with magnetic properties of Ni included shows good agreement with the data. Neither a Drude nor a plasma dielectric response provide a satisfactory description if the magnetic properties of nickel are disregarded.

cond-mat.mes-hall

Stronger limits on hypothetical Yukawa interactions in the 40--8000 nm range

We report the results of new differential force measurements between a test mass and rotating source masses of gold and silicon to search for forces beyond Newtonian gravity at short separations. The technique employed subtracts the otherwise dominant Casimir force at the outset and, when combined with a lock-in amplification technique, leads to a significant improvement (up to a factor $10^{3}$) over existing limits on the strength (relative to gravity) of a putative force in the 40--8000 nm interaction range.

hep-ex

Kelvin probe force microscopy of metallic surfaces used in Casimir force measurements

Kelvin probe force microscopy at normal pressure was performed by two different groups on the same Au-coated planar sample used to measure the Casimir interaction in a sphere-plane geometry. The obtained voltage distribution was used to calculate the separation dependence of the electrostatic pressure $P_{\rm res}(D)$ in the configuration of the Casimir experiments. In the calculation it was assumed that the potential distribution in the sphere has the same statistical properties as the measured one, and that there are no correlation effects on the potential distributions due to the presence of the other surface. Within this framework, and assuming that the potential distribution does not vary significantly at low pressure, the calculated $P_{\rm res}(D)$ does not explain the magnitude or the separation dependence of the difference $ΔP (D)$ between the measured Casimir pressure and the one calculated using a Drude model for the electromagnetic response of Au.

cond-mat.mes-hall

Limits on the accuracy of isoelectronic gravity measurements at short separation due to patch potentials

In force sensing experiments intended to measure non-Newtonian gravitational signals electrostatic patch potentials can give rise to spurious forces, torques, and noise. Undesired patch-induced interactions can lead to systematic effects which limit accuracy, and noise can place lower limits on precision. In this paper we develop the theory for electrostatic patch effects on isoelectronic experiments, where their mean effect is nullified by design. We derive analytical expressions for the patch force and torque power spectrum to estimate the limitations introduced by patch-induced signals.

gr-qc

A quasi-analytical modal approach for computing Casimir interactions in periodic nanostructures

We present an almost fully analytical technique for computing Casimir interactions between periodic lamellar gratings based on a modal approach. Our method improves on previous work on Casimir modal approaches for nanostructures by using the exact form of the eigenvectors of such structures, and computing eigenvalues by solving numerically a simple transcendental equation. In some cases eigenvalues can be solved for exactly, such as the zero frequency limit of gratings modeled by a Drude permittivity. Our technique also allows us to predict analytically the behavior of the Casimir interaction in limiting cases, such as the large separation asymptotics. The method can be generalized to more complex grating structures, and may provide a deeper understanding of the geometry-composition-temperature interplay in Casimir forces between nanostructures.

quant-ph

Capacitance measurements and electrostatic calibrations in experiments measuring the Casimir force

We compare the results of capacitance measurements in the lens-plane and sphere-plane configurations with theoretical predictions from various models of a spherical surface. It is shown that capacitance measurements are incapable of discriminating between models of perfect and modified spherical surfaces in an experiment demonstrating the anomalous scaling law for the electric force. Claims to the contrary in the recent literature are explained by the use of irregular comparison. The data from capacitance measurements in an experiment measuring the Casimir force using a micromechanical torsional oscillator are shown to be in excellent agreement with theoretical predictions using the model of a perfect spherical surface.

quant-ph

The Casimir force between a microfabricated elliptic cylinder and a plate

We investigate the Casimir force between a microfabricated elliptic cylinder (cylindrical lens) and a plate made of real materials. After a brief discussion of the fabrication procedure, which typically results in elliptic rather than circular cylinders, the Lifshitz-type formulas for the Casimir force and for its gradient are derived. In the specific case of equal semiaxes, the resulting formulas coincide with those derived previously for circular cylinders. The nanofabrication procedure may also result in asymmetric cylindrical lenses obtained from parts of two different cylinders, or rotated through some angle about the axis of the cylinder. In these cases the Lifshitz-type formulas for the Casimir force between a lens and a plate and for its gradient are also derived, and the influence of lens asymmetry is determined. Additionally, we obtain an expression for the shift of the natural frequency of a micromachined oscillator with an attached elliptic cylindrical lens interacting with a plate via the Casimir force in a nonlinear regime.

quant-ph

Possibility of measuring the thermal Casimir interaction between a plate and a cylinder attached to a micromachined oscillator

We investigate the possibility of measuring the thermal Casimir force and its gradient in the configuration of a plate and a microfabricated cylinder attached to a micromachined oscillator. The Lifshitz-type formulas in this configuration are derived using the proximity force approximation. The accuracy for the obtained expressions is determined from a comparison with exact results available in ideal metal case. Computations of the thermal correction to both the Casimir force and its gradient are performed in the framework of different theoretical approaches proposed in the literature. The correction to the Casimir force and its gradient due to lack of parallelism of the plate and cylinder is determined using the nonmultiplicative approach. The error introduced in the theory due to the finite length of the cylinder is estimated. We propose that both static and dynamic experiments measuring the thermal Casimir interaction between a cylinder and a plate using a micromachined oscillator can shed additional light on the thermal Casimir force problem. Specifically, it is shown that the static experiment is better adapted for the measurement of thermal effects.

quant-ph

Why Screening Effects Do Not Influence the Casimir Force

The Lifshitz theory of dispersion forces leads to thermodynamic and experimental inconsistencies when the role of drifting charge carriers is included in the model of the dielectric response. Recently modified reflection coefficients were suggested that take into account screening effects and diffusion currents. We demonstrate that this theoretical approach leads to a violation of the third law of thermodynamics (Nernst's heat theorem) for a wide class of materials and is excluded by the data from two recent experiments. The physical reason for its failure is explained by the violation of thermal equilibrium, which is the fundamental applicability condition of the Lifshitz theory, in the presence of drift and diffusion currents.

quant-ph

Application of the proximity force approximation to gravitational and Yukawa-type forces

We apply the proximity force approximation, which is widely used for the calculation of the Casimir force between bodies with nonplanar boundary surfaces, to gravitational and Yukawa-type interactions. It is shown that for the gravitational force in a sphere-plate configuration the general formulation of the proximity force approximation is well applicable. For a Yukawa-type interaction we demonstrate the validity of both the general formulation of the proximity force approximation, and a simple mapping between the sphere-plate and plate-plate configurations. The claims to the contrary in some recent literature are thus incorrect. Our results justify the constraints on the parameters of non-Newtonian gravity previously obtained from the indirect dynamic measurements of the Casimir pressure.

quant-ph

Comment on "Anomalies in electrostatic calibration for the measurement of the Casimir force in a sphere-plane geometry"

Recently W. J. Kim, M. Brown-Hayes, D. A. R. Dalvit, J. H. Brownell, and R. Onofrio [Phys. Rev. A, v.78, 036102(R) (2008)] performed electrostatic calibrations for a plane plate above a centimeter-size spherical lens at separations down to 20-30 nm and observed "anomalous behavior". It was found that the gradient of the electrostatic force does not depend on separation as predicted on the basis of a pure Coulombian contribution. Some hypotheses which could potentially explain the deviation from the expected behavior were considered, and qualitative arguments in favor of the influence of patch surface potentials were presented. We demonstrate that for the large lenses at separations of a few tens nanometers from the plate, the electrostatic force law used by the authors is not applicable due to possible deviations of the mechanically polished and ground lens surface from a perfect spherical shape. A model is proposed which explains the observed "anomalous behavior" using the standard Coulombian force.

quant-ph

Comment on "Possible resolution of the Casimir force finite temperature correction "controversies""

The recently suggested modification of the transverse electric contribution to the Lifshitz formula (S. K. Lamoreaux, arXiv:0801.1283) is discussed. We show that this modification is inconsistent with the data of two precise experiments, and violates the Nernst heat theorem. The preprint's suggestion concerning the resolution of the "apparent violation of the Third Law of Thermodynamics" is shown to be incorrect.

quant-ph

Stronger constraints on non-Newtonian gravity from the Casimir effect

We review new constraints on the Yukawa-type corrections to Newtonian gravity obtained recently from gravitational experiments and from the measurements of the Casimir force. Special attention is paid to the constraints following from the most precise dynamic determination of the Casimir pressure between the two parallel plates by means of a micromechanical torsional oscillator. The possibility of setting limits on the predictions of chameleon field theories using the results of gravitational experiments and Casimir force measurements is discussed.

hep-th

Novel constraints on light elementary particles and extra-dimensional physics from the Casimir effect

We present supplementary information on the recent indirect measurement of the Casimir pressure between two parallel plates using a micromachined oscillator. The equivalent pressure between the plates is obtained by means of the proximity force approximation after measuring the force gradient between a gold coated sphere and a gold coated plate. The data are compared with a new theoretical approach to the thermal Casimir force based on the use of the Lifshitz formula, combined with a generalized plasma-like dielectric permittivity which takes into account interband transitions of core electrons. The theoretical Casimir pressures calculated using the new approach are compared with those computed in the framework of the previously used impedance approach and also with the Drude model approach. The latter is shown to be excluded by the data at a 99.9% confidence level within a wide separation range from 210 to 620 nm. The level of agreement between the data and theoretical approaches based on the generalized plasma model, or the Leontovich surface impedance, is used to set stronger constraints on the Yukawa forces predicted from the exchange of light elementary particles and/or extra-dimensional physics. The resulting constraints are the strongest in the interaction region from 20 to 86 nm with a largest improvement by a factor of 4.4 at 26 nm.

hep-ph

Tests of new physics from precise measurements of the Casimir pressure between two gold-coated plates

A micromechanical torsion oscillator has been used to strengthen the limits on new Yukawa forces by determining the Casimir pressure between two gold-coated plates. By significantly reducing the random errors and obtaining the electronic parameters of the gold coatings, we were able to conclusively exclude the predictions of large thermal effects below 1 $μ$m and strengthen the constraints on Yukawa corrections to Newtonian gravity in the interaction range from 29.5 nm to 86 nm.

hep-ph