arXiv subjects

R. S. Towell

Publications and source records attributed to R. S. Towell.

At least 19 recordsLinked to original sources

arXiv2026

Measurements of Angular Distributions of Drell-Yan Dimuons in $p+p$ and $p+d$ Interactions at 120 GeV/$c$

We present experimental results on the angular distributions of Drell-Yan muons produced by a 120 GeV/$c$ proton beam interacting with liquid hydrogen and deuterium targets. The dimuon angular distributions in both polar ($θ$) and azimuthal ($ϕ$) angles in the Collins-Soper frame are measured within the kinematic range of $4.5 < m_{μμ} < 10\ \mathrm{GeV}/c^2$, $0.19 < p_T < 2.24\ \mathrm{GeV}/c$, and $0 < x_F < 0.95$. Unlike the results of a previous proton-induced Drell-Yan experiment at a higher energy, the data reveal a pronounced $\cos 2ϕ$ modulation in the angular distributions. Comparison with perturbative QCD (pQCD) predictions shows statistically significant deviations, with p-values of 3.5\% for the $p+p$ and 1.5\% for the $p+d$ Drell-Yan processes. These results suggest the presence of nonperturbative QCD contributions.

nucl-ex↗

arXiv2024

Measurement of $J/ψ$ and $ψ\left(2S\right)$ production in $p+p$ and $p+d$ interactions at 120 GeV

We report the $p+p$ and $p+d$ differential cross sections measured in the SeaQuest experiment for $J/ψ$ and $ψ\left(2S\right)$ production at 120 GeV beam energy covering the forward $x$-Feynman ($x_F$) range of $0.5 < x_F <0.9$. The measured cross sections are in good agreement with theoretical calculations based on the nonrelativistic QCD (NRQCD) using the long-distance matrix elements deduced from a recent global analysis of proton- and pion-induced charmonium production data. The $σ_{ψ\left(2S\right)} / σ_{J/ψ}$ cross section ratios are found to increase as $x_F$ increases, indicating that the $q \bar{q}$ annihilation process has larger contributions in the $ψ\left(2S\right)$ production than the $J/ψ$ production. The $σ_{pd}/2σ_{pp}$ cross section ratios are observed to be significantly different for the Drell-Yan process and $J/ψ$ production, reflecting their different production mechanisms. We find that the $σ_{pd}/2σ_{pp}$ ratios for $J/ψ$ production at the forward $x_F$ region are sensitive to the $\bar{d}/ \bar{u}$ flavor asymmetry of the proton sea, analogous to the Drell-Yan process. The transverse momentum ($p_T$) distributions for $J/ψ$ and $ψ\left(2S\right)$ production are also presented and compared with data collected at higher center-of-mass energies.

hep-ex↗

arXiv2023

Measurement of flavor asymmetry of light-quark sea in the proton with Drell-Yan dimuon production in $p+p$ and $p+d$ collisions at 120 GeV

Evidence for a flavor asymmetry between the $\bar u$ and $\bar d$ quark distributions in the proton has been found in deep-inelastic scattering and Drell-Yan experiments. The pronounced dependence of this flavor asymmetry on $x$ (fraction of nucleon momentum carried by partons) observed in the Fermilab E866 Drell-Yan experiment suggested a drop of the $\bar d\left(x\right) / \bar u\left(x\right)$ ratio in the $x > 0.15$ region. We report results from the SeaQuest Fermilab E906 experiment with improved statistical precision for $\bar d\left(x\right) / \bar u\left(x\right)$ in the large $x$ region up to $x=0.45$ using the 120 GeV proton beam. Two different methods for extracting the Drell-Yan cross section ratios, $σ^{pd} /2 σ^{pp}$, from the SeaQuest data give consistent results. The $\bar{d}\left(x\right) / \bar{u}\left(x\right)$ ratios and the $\bar d\left(x\right) - \bar u\left(x\right)$ differences are deduced from these cross section ratios for $0.13 < x < 0.45$. The SeaQuest and E866/NuSea $\bar{d}\left(x\right) / \bar{u}\left(x\right)$ ratios are in good agreement for the $x\lesssim 0.25$ region. The new SeaQuest data, however, show that $\bar d\left(x\right)$ continues to be greater than $\bar u\left(x\right)$ up to the highest $x$ value ($x = 0.45$). The new results on $\bar{d}\left(x\right) / \bar{u}\left(x\right)$ and $\bar{d}\left(x\right) - \bar{u}\left(x\right)$ are compared with various parton distribution functions and theoretical calculations.

hep-ph↗

arXiv2023

Estimation of Combinatoric Background in SeaQuest using an Event-Mixing Method

All experiments observing dilepton pairs (e.g. $e^+e^-$, $μ^+μ^-$) must confront the existence of a combinatoric background caused by the combining of tracks not arising from the same physics vertex. Some method must be devised to calculate and remove this background. In this document we describe a particular event-mixing method relying on many of the unique aspects of the SeaQuest spectrometer and data. The method described here calculates the combinatoric background with correct normalization; i.e., there is no need to assign a floating normalization factor that is then determined in a subsequent fitting procedure. Numerous tests are applied to demonstrate the reliability of the method.

hep-ex↗

arXiv2021

Measurement of material isotopics and atom number ratio with alpha-particle spectroscopy for the NIFFTE fission Time Projection Chamber actinide target

We present the results of a measurement of isotopic concentrations and atomic number ratio of a double-sided actinide target with alpha-spectroscopy and mass spectrometry. The double-sided actinide target, with primarily Pu-239 on one side and U-235 on the other, was used in the fission Time Projection Chamber (fissionTPC) for a measurement of the neutron-induced fission cross-section ratio between the two isotopes. The measured atomic number ratio is intended to provide an absolute normalization of the measured fission cross-section ratio. The Pu-239/U-235 atom number ratio was measured with a combination of mass spectrometry and alpha-spectroscopy with a planar silicon detector with uncertainties of less than 1%.

nucl-ex↗

arXiv2021

Measurement of the $^{239}$Pu(n,f)/$^{235}$U(n,f) Cross-Section Ratio with the NIFFTE fission Time Projection Chamber

The $^{239}$Pu(n,f)/$^{235}$U(n,f) cross-section ratio has been measured with the fission Time Projection Chamber (fissionTPC) from 100 keV to 100 MeV. The fissionTPC provides three-dimensional reconstruction of fission-fragment ionization profiles, allowing for a precise quantification of measurement uncertainties. The measurement was performed at the Los Alamos Neutron Science Center which provides a pulsed white source of neutrons. The data are recommended to be used as a cross-section ratio shape. A discussion of the status of the absolute normalization and comparisons to ENDF evaluations and previous measurements is included.

nucl-ex↗

arXiv2021

The Asymmetry of Antimatter in the Proton

The fundamental building blocks of the proton, quarks and gluons, have been known for decades. However, we still have an incomplete theoretical and experimental understanding of how these particles and their dynamics give rise to the quantum bound state of the proton and its physical properties, such as for example its spin. The two up and the single down quarks that comprise the proton in the simplest picture account only for a few percent of the proton mass, the bulk of which is in the form of quark kinetic and potential energy and gluon energy from the strong force. An essential feature of this force, as described by quantum chromodynamics, is its ability to create matter-antimatter quark pairs inside the proton that exist only for a very short time. Their fleeting existence makes the antimatter quarks within protons difficult to study, but their existence is discernible in reactions where a matter-antimatter quark pair annihilates. In this picture of quark-antiquark creation by the strong force, the probability distributions as a function of momentum for the presence of up and down antimatter quarks should be nearly identical, since their masses are quite similar and small compared to the mass of the proton. In the present manuscript, we show evidence from muon pair production measurements that these distributions are significantly different, with more abundant down antimatter quarks than up antimatter quarks over a wide range of momentum. These results revive interest in several proposed mechanisms as the origin of this antimatter asymmetry in the proton that had been disfavored by the previous results and point to the future measurements that can distinguish between these mechanisms.

hep-ph↗

arXiv2020

Neutron Induced Fission Fragment Angular Distributions, Anisotropy, and Linear Momentum Transfer Measured with the NIFFTE Fission Time Projection Chamber

The Neutron Induced Fission Fragment Tracking Experiment (NIFFTE) collaboration has performed measurements with a fission time projection chamber (fissionTPC) to study the fission process by reconstructing full three-dimensional tracks of fission fragments and other ionizing radiation. The amount of linear momentum imparted to the fissioning nucleus by the incident neutron can be inferred by measuring the opening angle between the fission fragments. Using this measured linear momentum, fission fragment angular distributions can be converted to the center-of-mass frame for anisotropy measurements. Angular anisotropy is an important experimental observable for understanding the quantum mechanical state of the fissioning nucleus and vital to determining detection efficiency for cross section measurements. Neutron linear momentum transfer to fissioning $^{235}$U, $^{238}$U, and $^{239}$Pu and fission fragment angular anisotropy of $^{235}$U and $^{238}$U as a function of neutron energies in the range 130 keV--250 MeV are presented.

nucl-ex↗

arXiv2019

Fission Fragment Angular Anisotropy in Neutron-Induced Fission of $^{235}$U Measured with a Time Projection Chamber

Fission fragment angular distributions can provide an important constraint on fission theory, improving predictive fission codes, and are a prerequisite for a precise ratio cross section measurement. Available anisotropy data is sparse, especially at neutron energies above 5 MeV. For the first time, a three-dimensional tracking detector is employed to study fragment emission angles and provide a direct measurement of angular anisotropy. The Neutron Induced Fission Fragment Tracking Experiment (NIFFTE) collaboration has deployed the fission time projection chamber (fissionTPC) to measure nuclear data with unprecedented precision. The fission fragment anisotropy of $^{235}$U has been measured over a wide range of incident neutron energies from 180 keV to 200 MeV; a careful study of the systematic uncertainties complement the data.

nucl-ex↗

arXiv2019

1H(n,el) as a Cross Section Reference in a White Source Neutron Beam With the fissionTPC

We provide a quantitative description of a method to measure neutron-induced fission cross sections in ratio to elastic hydrogen scattering in a white-source neutron beam with the fission Time Projection Chamber. This detector has measured precision fission cross section ratios using actinide references such as $^{235}$U(n,f) and $^{238}$U(n,f). However, by employing a more precise reference such as the H(n,el) cross section there is the potential to further reduce the evaluation uncertainties of the measured cross sections. In principle the fissionTPC could provide a unique measurement by simultaneously measuring both fission fragments and proton recoils over a large solid angle. We investigate one method with a hydrogenous gas target and with the neutron energy determined by the proton recoil kinematics. This method enables the measurement to be performed in a white-source neutron beam and with the current configuration of the fissionTPC. We show that while such a measurement is feasible in the energy range of 0.5 MeV to $\sim$10 MeV, uncertainties on the proton detection efficiency and the neutron energy resolution do not allow us to preform a fission ratio measurement to the desired precision. Utilizing either a direct measurement of the neutron time-of-flight for the recoil proton or a mono-energetic neutron source or some combination of both would provide a path to a sub-percent precision measurement.

nucl-ex↗

arXiv2019

The SeaQuest Spectrometer at Fermilab

The SeaQuest spectrometer at Fermilab was designed to detect oppositely-charged pairs of muons (dimuons) produced by interactions between a 120 GeV proton beam and liquid hydrogen, liquid deuterium and solid nuclear targets. The primary physics program uses the Drell-Yan process to probe antiquark distributions in the target nucleon. The spectrometer consists of a target system, two dipole magnets and four detector stations. The upstream magnet is a closed-aperture solid iron magnet which also serves as the beam dump, while the second magnet is an open aperture magnet. Each of the detector stations consists of scintillator hodoscopes and a high-resolution tracking device. The FPGA-based trigger compares the hodoscope signals to a set of pre-programmed roads to determine if the event contains oppositely-signed, high-mass muon pairs.

physics.ins-det↗

arXiv2018

Design and Beam Test Results for the sPHENIX Electromagnetic and Hadronic Calorimeter Prototypes

The super Pioneering High Energy Nuclear Interaction eXperiment (sPHENIX) at the Relativistic Heavy Ion Collider (RHIC) will perform high precision measurements of jets and heavy flavor observables for a wide selection of nuclear collision systems, elucidating the microscopic nature of strongly interacting matter ranging from nucleons to the strongly coupled quark-gluon plasma. A prototype of the sPHENIX calorimeter system was tested at the Fermilab Test Beam Facility as experiment T-1044 in the spring of 2016. The electromagnetic calorimeter (EMCal) prototype is composed of scintillating fibers embedded in a mixture of tungsten powder and epoxy. The hadronic calorimeter (HCal) prototype is composed of tilted steel plates alternating with plastic scintillator. Results of the test beam reveal the energy resolution for electrons in the EMCal is $2.8\%\oplus~15.5\%/\sqrt{E}$ and the energy resolution for hadrons in the combined EMCal plus HCal system is $13.5\%\oplus 64.9\%/\sqrt{E}$. These results demonstrate that the performance of the proposed calorimeter system satisfies the sPHENIX specifications.

physics.ins-det↗

arXiv2018

Measurement of the normalized $^{238}$U(n,f)/$^{235}$U(n,f) cross section ratio from threshold to 30 MeV with the fission Time Projection Chamber

The normalized $^{238}$U(n,f)/$^{235}$U(n,f) cross section ratio has been measured using the NIFFTE fission Time Projection Chamber from the reaction threshold to $30$~MeV. The fissionTPC is a two-volume MICROMEGAS time projection chamber that allows for full three-dimensional reconstruction of fission-fragment ionization profiles from neutron-induced fission. The measurement was performed at the Los Alamos Neutron Science Center, where the neutron energy is determined from neutron time-of-flight. The $^{238}$U(n,f)/$^{235}$U(n,f) ratio reported here is the first cross section measurement made with the fissionTPC, and will provide new experimental data for evaluation of the $^{238}$U(n,f) cross section, an important standard used in neutron-flux measurements. Use of a development target in this work prevented the determination of an absolute normalization, to be addressed in future measurements. Instead, the measured cross section ratio has been normalized to ENDF/B-VIII.$β$5 at 14.5 MeV.

nucl-ex↗

arXiv2014

A Time Projection Chamber for High Accuracy and Precision Fission Cross Section Measurements

The fission Time Projection Chamber (fissionTPC) is a compact (15 cm diameter) two-chamber MICROMEGAS TPC designed to make precision cross section measurements of neutron-induced fission. The actinide targets are placed on the central cathode and irradiated with a neutron beam that passes axially through the TPC inducing fission in the target. The 4$π$ acceptance for fission fragments and complete charged particle track reconstruction are powerful features of the fissionTPC which will be used to measure fission cross sections and examine the associated systematic errors. This paper provides a detailed description of the design requirements, the design solutions, and the initial performance of the fissionTPC.

physics.ins-det↗

arXiv2013

Targets for Precision Measurements

The general properties needed in targets (sources) for high precision, high accuracy measurements are reviewed. The application of these principles to the problem of developing targets for the Fission TPC is described. Longer term issues, such as the availability of actinide materials, improved knowledge of energy losses and straggling and the stability of targets during irradiation are also discussed.

physics.ins-det↗

arXiv2003

J/Psi Polarization in 800-GeV p-Cu Interactions

We present measurements of the polarization of the $ J/ψ$ produced in 800-GeV proton interactions with a copper target. Polarization of the $ J/ψ$ is sensitive to the $ c \bar{c} $ production and hadronization processes. A longitudinal polarization is observed at large $ x_{F} $, while at small $ x_{F} $ the state is produced essentially unpolarized or slightly transversely polarized. No significant variation of the polarization is observed versus $ p_{T} $.

hep-ex↗

arXiv2003

Absolute Drell-Yan Dimuon Cross Sections in 800 GeV/c pp and pd Collisions

The Fermilab E866/NuSea Collaboration has measured the Drell-Yan dimuon cross sections in 800 GeV/$c$ $pp$ and $pd$ collisions. This represents the first measurement of the Drell-Yan cross section in $pp$ collisions over a broad kinematic region and the most extensive study to date of the Drell-Yan cross section in $pd$ collisions. The results indicate that recent global parton distribution fits provide a good description of the light antiquark sea in the nucleon over the Bjorken-$x$ range $0.03 \lesssim x < 0.15$, but overestimate the valence quark distributions as $x \to 1$.

hep-ex↗

arXiv2001

Improved Measurement of the $\bar d / \bar u$ Asymmetry in the Nucleon Sea

Measurements of the ratio of Drell-Yan yields from an 800 \rm{GeV/c} proton beam incident on liquid hydrogen and deuterium targets are reported. Approximately 360,000 Drell-Yan muon pairs remained after all cuts on the data. From these data, the ratio of anti-down ($\bar{d}$) to anti-up ($\bar{u}$) quark distributions in the proton sea is determined over a wide range in Bjorken-$x$. These results confirm previous measurements by E866 and extend them to lower $x$. From these data, $(\bar{d}-\bar{u})$ and $\int(\bar{d}-\bar{u})dx$ are evaluated for $0.015<x<0.35$. These results are compared with parameterizations of various parton distribution functions, models and experimental results from NA51, NMC, and HERMES.

hep-ex↗