arXiv subjects

R. Santos-Güemes

Publications and source records attributed to R. Santos-Güemes.

5 recordsLinked to original sources

arXiv2022

A generalized line tension model for precipitate strengthening in metallic alloys

A generalized line tension model has been developed to estimate the critical resolved shear stress in precipitation hardened alloys. The model is based in previous line tension models for regular arrays of either impenetrable or shearable spherical precipitates that were expanded to take into account the effect of the elastic mismatch between the matrix and the precipitates. The model parameters are calibrated from dislocation dynamics simulations that covered a wide range of precipitate diameters and spacing as well as of the mismatch in elastic constants. This model is extended to deal with random arrays of monodisperse spherical precipitates by changing the geometrical parameters of the model by the averaged ones corresponding to the random distributions. The model predictions were in good agreement with the critical resolved shear stresses obtained from dislocation dynamics simulations of random spherical precipitates distributions for both impenetrable and shearable precipitates, providing a fast and accurate tool to predict precipitate strengthening in metallic alloys.

cond-mat.mtrl-sci↗

arXiv2021

Dislocation dynamics prediction of the strength of Al-Cu alloys containing shearable $θ''$ precipitates

The critical resolved shear stress of an Al 4 wt. \% Cu alloy containing a homogeneous distribution of $θ''$ precipitates was determined by means of dislocation dynamics simulations. The size distribution, shape, orientation and volume fraction of the precipitates in the alloy were obtained from transmission electron microscopy observations while the parameters controlling the dislocation/precipitate interactions (elastic mismatch, transformation strains, dislocation mobility and cross-slip probability, etc.) were calculated from atomistic simulations. The precipitates were assumed to be either impenetrable or shearable by the dislocations, the latter characterized by a threshold shear stress that has to be overcome to shear the precipitate. The predictions of the simulations in terms of the critical resolved shear stress and of the dislocation/precipitate interaction mechanisms were in good agreement with the experimental results. It was concluded that the optimum strength of this alloy is attained with a homogeneous distribution of $θ''$ precipitates whose average size ($\approx$ 40 nm) is at the transition between precipitate shearing and looping. Overall, the dislocation dynamics strategy presented in this paper is able to provide quantitative predictions of precipitate strengthening in metallic alloys.

cond-mat.mtrl-sci↗

arXiv2020

Multiscale modelling of precipitation hardening in Al-Cu alloys: dislocation dynamics simulations and experimental validation

The mechanisms of dislocation/precipitate interactions were analyzed in an Al-Cu alloy containing a homogeneous dispersion of $θ'$ precipitates by means of discrete dislocation dynamics simulations. The simulations were carried out within the framework of the discrete-continuous method and the precipitates were assumed to be impenetrable by dislocations. The main parameters that determine the dislocation/precipitate interactions (elastic mismatch, stress-free transformation strains, dislocation mobility and cross-slip rate) were obtained from atomistic simulations, while the size, shape, spatial distribution and volume fraction of the precipitates were obtained from transmission electron microscopy. The predictions of the critical resolved shear stress (including the contribution of solid solution) were in agreement with the experimental results obtained by means of compression tests in micropillars of the Al-Cu alloy oriented for single slip. The simulations revealed that the most important contribution to the precipitation hardening of the alloy was provided by the stress-free transformation strains followed by the solution hardening and the Orowan mechanism due to the bow-out of the dislocations around the precipitates.

cond-mat.mtrl-sci↗

arXiv2019

Influence of the stress state on the cross-slip free energy barrier in Al: an atomistic investigation

The influence of the stress state on the cross-slip rate in Al was analyzed by means of molecular dynamics simulations and transition state theory. The activation energy barrier in the absence of thermal energy was determined through the nudged elastic band method while the cross-slip rates were determined using molecular dynamics simulations for different magnitudes of the Schmid stress on the cross-slip plane, and of the Escaig stresses on the cross-slip and glide planes. The enthalpy barrier and the effective attempt frequency were determined from the average rates of cross-slip obtained from the molecular dynamics simulations. It was found that the different stress states influence the cross-slip rate assuming harmonic transition state theory. Moreover, the theoretical contributions to the enthalpy barrier (configurational and due to the interaction of the applied stress with the local stress field created by the defect) were identified from the atomistic simulations while the entropic contribution to the activation energy could be estimated by the Meyer-Neldel rule. Based on these results, an analytical expression of the activation enthalpy for cross-slip in Al as a function of the different combinations of Schmid and Escaig stress states was developed and validated. This expression can be easily used in dislocation dynamics simulations to evaluate the probability of cross-slip of screw dislocation segments.

cond-mat.mtrl-sci↗

arXiv2018

Discrete dislocation dynamics simulations of dislocation-$θ'$ precipitate interaction in Al-Cu alloys

The mechanisms of dislocation/precipitate interaction were studied by means of discrete dislocation dynamics within a multiscale approach. Simulations were carried out using the discrete continuous method in combination with a fast Fourier transform solver to compute the mechanical fields. The original simulation strategy was modified to include straight dislocation segments by means of the field dislocation mechanics method and was applied to simulate the interaction of an edge dislocation with a $θ'$ precipitate in an Al-Cu alloy. It was found that the elastic mismatch has a negligible influence on the dislocation/precipitate interaction in the Al-Cu system. Moreover, the influence of the precipitate aspect ratio and orientation was reasonably well captured by the simple Orowan model in the absence of the stress-free transformation strain. Nevertheless, the introduction of the stress-free transformation strain led to dramatic changes in the dislocation/precipitate interaction and in the critical resolved shear stress to overcome the precipitate, particularly in the case of precipitates with small aspect ratio. The new multiscale approach to study the dislocation/precipitate interactions opens the possibility to obtain quantitative estimations of the strengthening provided by precipitates in metallic alloys taking into account the microstructural details.

cond-mat.mtrl-sci↗