arXiv subjects

R. Singh

Publications and source records attributed to R. Singh.

At least 19 recordsLinked to original sources

arXiv2026

The SPT-3G+ receiver design

We present the thermo-mechanical design of the cryostat and camera optics for SPT-3G+, a new receiver being developed for the South Pole Telescope (SPT). The receiver consists of 14 detector arrays of 90/150 GHz dichroic polarization-sensitive pixels, totaling 24,080 transition-edge sensor detectors. Each detector array lies at the end of an optics tube, each approximately 240 mm in diameter and 772 mm in length, which are arranged in a hexagonal close-packed configuration to achieve a 4 degree diameter field of view. Each optics tube contains four anti-reflection coated lenses fabricated from different materials (alumina, silicon, and nylon) that are designed to also provide infrared filtering that reduces the radiative loading on the cryogenic stages. The optics and detectors are cooled by a combination of a pulse tube cooler for the 40 K and 4 K stages, and a dilution refrigerator for the 1 K and 100 mK stages. Thermal modeling predicts the heat load to be less than 26 W and 1 W for the 40 K and 4 K stages, respectively. The 1,550 kg cryostat has a 1.1 meter diameter at the vacuum window, which is located near the telescope Gregorian focus, and 1.75 meters in height and length. Fabrication of the cryostat will begin in 2026, with installation on the SPT scheduled for the 2028-29 austral summer, ahead of the 2029 winter observing season.

astro-ph.IM↗

arXiv2026

SPT-3G+: A Cosmic Microwave Background Experiment for the South Pole Telescope

SPT-3G+ is the next survey receiver planned to be installed in early 2029 on the 10-meter South Pole Telescope (SPT). This new receiver will feature 6,020 polarization-sensitive dichroic pixels with transition-edge sensors observing in frequency bands centered at 90 GHz and 150 GHz. The 24,080 detectors in the SPT-3G+ receiver will be cooled to 100 mK by a dilution refrigerator and read out using microwave SQUID multiplexing. The optical design of the receiver enables a 4 degree diameter field of view, which is broken up into 14 individual optics tubes each containing cryogenic alumina, silicon, and nylon lenses. These technology choices will allow the SPT-3G+ receiver to improve on the mapping speed of the currently operating SPT-3G receiver by nearly an order of magnitude. Once deployed, the SPT-3G+ receiver will observe for 6-years an area overlapping with the BICEP survey to achieve a combined (90 GHz and 150 GHz) CMB map depth of 0.5 uK-arcmin. Data from these observations will be used to create unprecedentedly deep CMB lensing maps, discover new galaxy clusters, and detect astrophysical transients. The lensing map produced by SPT-3G+ will be used to remove or "delens" foreground B modes, where large-scale structure gravitationally lenses the CMB and converts E modes into B-mode polarization, with the goal of revealing inflationary B modes. Together with data from the BICEP Array as part of the South Pole Observatory, SPT-3G+ data will be used to constrain the tensor-to-scalar ratio $r$ with a goal of achieving a measurement of $\sigma(r) = 0.001$

astro-ph.CO↗

arXiv2025

Development and performance test of p-type Silicon pad array detector

This article reports on the development and comprehensive evaluation of p-type silicon detector arrays fabricated at the Semi-Conductor Laboratory (SCL), Mohali, India. The detectors consist of an 8~$\times$~9 array of 1~$\times$~1~cm$^2$ pads fabricated on 6-inch wafers and read out using the High Granularity Calorimeter Readout Chip (HGCROC). Electrical characterization of the detector through current vs. voltage (IV) and capacitance vs. voltage (CV) measurements demonstrated consistent breakdown and full depletion voltages across all pads, in agreement with Technology Computer-Aided Design (TCAD) device simulations. Laboratory measurements with a $^{90}$Sr source and beam tests at PS, CERN with 10 GeV pions, showed a clear Minimum Ionizing Particle (MIP) signal, well separated from the pedestal and uniform response of the pads with an average signal-to-noise (S/N) ratio above 5.5. The measured shower profiles with 2-4 GeV positron beams for various thicknesses of a tungsten absorber placed in front of the detector are found to be in agreement with the corresponding Geant4 simulations. The performance test results for the detector show that it is a promising candidate for the future ALICE upgrade detector named Forward Calorimeter (FoCal). The FoCal will have alternating layers of low and high-granularity silicon pad detectors with absorbers as a part of the electromagnetic segment, and along with its hadronic segment, will study the direct photons, neutral hadrons, vector mesons, and jets production in the low Bjorken-x region.

physics.ins-det↗

arXiv2025

Demonstration of a 1820 channel multiplexer for transition-edge sensor bolometers

The scalability of most transition-edge sensor arrays is limited by the multiplexing technology which combines their signals over a reduced number of wires and amplifiers. In this Letter, we present and demonstrate a multiplexer design optimized for transition-edge sensor bolometers with 1820 sensors per readout unit, a factor of two more than the previous state-of-the-art. The design is optimized for cosmic microwave background imaging applications, and it builds on previous microwave superconducting quantum interference device multiplexers by doubling the available readout bandwidth to the full 4-8 GHz octave. Evaluating the key performance metrics of yield, sensitivity, and crosstalk through laboratory testing, we find an end-to-end operable detector yield of 78%, a typical nearest-neighbor crosstalk amplitude of ~0.4%, and a median white noise level of 83 pA/rtHz due to the multiplexer, corresponding to an estimated contribution of 4% to the total system noise for a ground-based cosmic microwave background telescope. Additionally, we identify a possible path toward reducing resonator loss for future designs with reduced noise. We expect these developments to alleviate the system complexity, cryogenic requirements, and cost of future large arrays of low temperature detectors.

physics.ins-det↗

arXiv2025

Sub-Poissonian Light in a Waveguide Kerr-medium

Waveguides on a chip represent a new medium for implementing nonlinear optical transformations of light. Modern $\text{Si}_3\text{N}_4$ chip waveguides are attractive due to their high Kerr nonlinearity, suppressed Brillouin scattering on guided acoustic waves (GAWBS), and lengths up to one meter. The capabilities of waveguides for generating sub-Poissonian light in the form of a displaced Kerr state are analyzed. We offer new analytical formulas for estimating the capabilities of suppressing photon fluctuations of a displaced Kerr state for any value of input light amplitude. The results of numerical calculations are presented. It is shown that the degree of photon noise suppression can reach values of 5 - 15 dB with 100 mW light power in waveguides a few meters long.

quant-ph↗

arXiv2024

Design,fabrication and characterization of 8x9 n-type silicon pad array for sampling calorimetry

This paper reports the development and testing of n-type silicon pad array detectors targeted for the Forward Calorimeter (FoCal) detector, which is an upgrade of the ALICE detector at CERN, scheduled for data taking in Run~4~(2029-2034). The FoCal detector includes hadronic and electromagnetic calorimeters, with the latter made of tungsten absorber layers and granular silicon pad arrays read out using the High Granularity Calorimeter Readout Chip~(HGCROC). This paper covers the Technology Computer-Aided Design (TCAD) simulations, the fabrication process, current versus voltage (IV) and capacitance versus voltage (CV) measurements, test results with a blue LED and $^{90}$Sr beta source, and neutron radiation hardness tests. IV measurements for the detector showed that 90\% of the pads had leakage current below 10~nA at full depletion voltage. Simulations predicted a breakdown voltage of 1000~V and practical tests confirmed stable operation up to 500~V without breakdown. CV measurements in the data and the simulations gave a full depletion voltage of around 50~V at a capacitance of 35~pF. LED tests verified that all detector pads responded correctly. Additionally, the 1$\times$1 cm$^2$ pads were also tested with the neutron radiations at a fluence of $5\times10^{13}$ 1~MeV~n$_{eq}$/cm$^2$.

physics.ins-det↗

arXiv2024

Interpretation of the horizontal beam response near the third integer resonance

The beam response to an external periodic excitation delivers relevant information about the optics, tune distribution and stability of a circulating beam in a storage ring. In this contribution the horizontal beam response to the excitation (transfer function) under conditions typical for slow extraction is presented for a coasting beam. The resulting spectrum exhibits a splitting behaviour. The single particle dynamics is discussed and an interpretation based on simulation results is presented.

physics.acc-ph↗

arXiv2024

Beam test of n-type Silicon pad array detector at PS CERN

This work reports the testing of a Forward Calorimeter (FoCal) prototype based on an n-type Si pad array detector at the CERN PS accelerator. The FoCal is a proposed upgrade in the ALICE detector operating within the pseudorapidity range of 3.2 < $\mathrm{\eta}$ < 5.8. It aims to measure direct photons, neutral hadrons, vector mesons, and jets for the study of gluon saturation effects in the unexplored region of low momentum fraction x ($\mathrm{\sim10^{-5} - 10^{-6}}$). The prototype is a $\mathrm{8\times9}$ n-type Si pad array detector with each pad occupying one cm$^2$ area, fabricated on a 6-in, 325~$\mathrm{\pm 10 \thinspace \mu}$m thick, and high-resistivity ($\sim$7 k$\Omega \thinspace$ cm) Si wafer which is readout using HGCROCv2 chip. The detector is tested using pion beams of energy 10~GeV and electron beams of energy 1-5~GeV. The measurements of the Minimum Ionizing Particle (MIP) response of pions and the shower profiles of electrons are reported.

physics.ins-det↗

arXiv2023

Beam Charge Asymmetries for Deeply Virtual Compton Scattering on the Proton at CLAS12

The parameterization of the nucleon structure through Generalized Parton Distributions (GPDs) shed a new light on the nucleon internal dynamics. For its direct interpretation, Deeply Virtual Compton Scattering (DVCS) is the golden channel for GPDs investigation. The DVCS process interferes with the Bethe-Heitler (BH) mechanism to constitute the leading order amplitude of the $eN \to eN\gamma$ process. The study of the $ep\gamma$ reaction with polarized positron and electron beams gives a complete set of unique observables to unravel the different contributions to the $ep \gamma$ cross section. This separates the different reaction amplitudes, providing a direct access to their real and imaginary parts which procures crucial constraints on the model dependences and associated systematic uncertainties on GPDs extraction. The real part of the BH-DVCS interference amplitude is particularly sensitive to the $D$-term which parameterizes the Gravitational Form Factors of the nucleon. The separation of the imaginary parts of the interference and DVCS amplitudes provides insights on possible higher-twist effects. We propose to measure the unpolarized and polarized Beam Charge Asymmetries (BCAs) of the $\vec{e}^{\pm}p \to e^{\pm}p \gamma$ process on an unpolarized hydrogen target with {\tt CLAS12}, using polarized positron and electron beams at 10.6 GeV. The azimuthal and $t$-dependences of the unpolarized and polarized BCAs will be measured over a large $(x_B,Q^2)$ phase space using a 100 day run with a luminosity of 0.66$\times 10^{35}$cm$^{-2}\cdot$s$^{-1}$.

nucl-ex↗

arXiv2023

A Direct Measurement of Hard Two-Photon Exchange with Electrons and Positrons at CLAS12

One of the most surprising discoveries made at Jefferson Lab has been the discrepancy in the determinations of the proton's form factor ratio $\mu_p G_E^p/G_M^p$ between unpolarized cross section measurements and the polarization transfer technique. Over two decades later, the discrepancy not only persists but has been confirmed at higher momentum transfers now accessible in the 12-GeV era. The leading hypothesis for the cause of this discrepancy, a non-negligible contribution from hard two-photon exchange, has neither been conclusively proven or disproven. This state of uncertainty not only clouds our knowledge of one-dimensional nucleon structure but also poses a major concern for our field's efforts to map out the three-dimensional nuclear structure. A better understanding of multi-photon exchange over a wide phase space is needed. We propose making comprehensive measurements of two-photon exchange over a wide range in momentum transfer and scattering angle using the CLAS12 detector. Specifically, we will measure the ratio of positron-proton to electron-proton elastic scattering cross sections, using the proposed positron beam upgrade for CEBAF. The experiment will use 2.2, 4.4, and 6.6 GeV lepton beams incident on the standard CLAS12 unpolarized hydrogen target. Data will be collected by the CLAS12 detector in its standard configuration, except for a modified trigger to allow the recording of events with beam leptons scattered into the CLAS12 central detector. The sign of the beam charge, as well as the polarity of the CLAS12 solenoid and toroid, will be reversed several times in order to suppress systematics associated with local detector efficiency and time-dependent detector performance. The proposed high-precision determination of two-photon effects will be...

nucl-ex↗

arXiv2023

Artificial Intelligence for the Electron Ion Collider (AI4EIC)

The Electron-Ion Collider (EIC), a state-of-the-art facility for studying the strong force, is expected to begin commissioning its first experiments in 2028. This is an opportune time for artificial intelligence (AI) to be included from the start at this facility and in all phases that lead up to the experiments. The second annual workshop organized by the AI4EIC working group, which recently took place, centered on exploring all current and prospective application areas of AI for the EIC. This workshop is not only beneficial for the EIC, but also provides valuable insights for the newly established ePIC collaboration at EIC. This paper summarizes the different activities and R&D projects covered across the sessions of the workshop and provides an overview of the goals, approaches and strategies regarding AI/ML in the EIC community, as well as cutting-edge techniques currently studied in other experiments.

physics.acc-ph↗

arXiv2023

The Role of Physical Layer Security in Satellite-Based Networks

In the coming years, 6G will revolutionize the world with a large amount of bandwidth, high data rates, and extensive coverage in remote and rural areas. These goals can only be achieved by integrating terrestrial networks with non-terrestrial networks. On the other hand, these advancements are raising more concerns than other wireless links about malicious attacks on satellite-terrestrial links due to their openness. Over the years, physical layer security (PLS) has emerged as a good candidate to deal with security threats by exploring the randomness of wireless channels. In this direction, this paper reviews how PLS methods are implemented in satellite communications. Firstly, we discuss the ongoing research on satellite-based networks by highlighting the key points in the literature. Then, we revisit the research activities on PLS in satellite-based networks by categorizing the different system architectures. Finally, we highlight research directions and opportunities to leverage the PLS in future satellite-based networks.

eess.SP↗

arXiv2022

Study and improvements of a radially coupled coaxial Fast Faraday cup design towards lower intensity beams

A radially-coupled coaxial fast Faraday cup design was presented in [1] for high-intensity non-relativistic proton beams. In this work, we discuss a modification of that design in the context of a relatively lower intensity ion beam for longitudinal charge profile measurements. Particle-in-cell and time domain electromagnetic simulations of the new design with a focus on avoiding field dilution while generating enough signal for relatively lower intensity ion beams at the upcoming High Current Injector Programme at IUAC, New Delhi [2,3] is discussed. Profile distortions from secondary electron emission are estimated and strategies to suppress them are discussed.

physics.acc-ph↗

arXiv2022

Chemically Aware Unitary Coupled Cluster with ab initio Calculations on System Model H1: A Refrigerant Chemicals Application

Circuit depth reduction is of critical importance for quantum chemistry simulations on current and near term quantum computers. This issue is tackled by introducing a chemically aware strategy for the Unitary Coupled Cluster ansatz. The objective is to use the chemical description of a system to aid in the synthesis of a quantum circuit. We combine this approach with two flavours of Symmetry Verification for the reduction of experimental noise. These method enable the use of System Model H1 for a 6-qubit QSE (Quantum Subspace Expansion). We present (i) calculations to obtain CH4 optical spectra; (ii) an atmospheric gas reaction simulation involving $[$CH$^{\cdot}_3$--H--OH$^{\cdot}]^{\ddagger}$. Using our chemically aware UCC state-preparation strategy in tandem with state of the art symmetry verification methods, we improve device yield for CH4 at 6-qubits. This is demonstrated by a 90% improvement in two-qubit gate count and reduction in relative error to 0.2% for electronic energy calculated on System Model H1.

quant-ph↗

arXiv2022

Snowmass2021 Cosmic Frontier: The landscape of low-threshold dark matter direct detection in the next decade

The search for particle-like dark matter with meV-to-GeV masses has developed rapidly in the past few years. We summarize the science case for these searches, the recent progress, and the exciting upcoming opportunities. Funding for Research and Development and a portfolio of small dark matter projects will allow the community to capitalize on the substantial recent advances in theory and experiment and probe vast regions of unexplored dark-matter parameter space in the coming decade.

hep-ph↗

arXiv2021

Ultrahigh nitrogen-vacancy center concentration in diamond

High concentration of negatively charged nitrogen-vacancy ($\text{NV}^{-}$) centers was created in diamond single crystals containing approximately 100 ppm nitrogen using electron and neutron irradiation and subsequent thermal annealing in a stepwise manner. Continuous wave electron paramagnetic resonance (EPR) was used to determine the transformation efficiency from isolated N atoms to $\text{NV}^{-}$ centers in each production step and its highest value was as high as 17.5 %. Charged vacancies are formed after electron irradiation as shown by EPR spectra, but the thermal annealing restores the sample quality as the defect signal diminishes. We find that about 25 % of the vacancies form NVs during the annealing process. The large $\text{NV}^{-}$ concentration allows to observe orientation dependent spin-relaxation times and also the determination of the hyperfine and quadrupole coupling constants with high precision using electron spin echo (ESE) and electron-nuclear double resonance (ENDOR). We also observed the EPR signal associated with the so-called W16 centers, whose spectroscopic properties might imply a nitrogen dimer-vacancy center for its origin.

cond-mat.mtrl-sci↗

arXiv2021

Analytical Modeling of $I-V$ characteristics using 2D Poisson Equations in AlN/$β$-Ga$_2$O$_3$ HEMT

In this paper, physics-based analytical models using two-dimensional (2D) Poisson equations for surface potential, channel potential, electric field, and drain current in AlN/$β$-Ga$_2$O$_3$ high electron mobility transistor (HEMT) is presented. The analytical expression of different quantities is achieved based on full depletion approximation of the AlN barrier layer and polarization charge induced unified two-dimensional electron gas (2DEG) charge density model. For the validation of the developed model, results are compared with 2D numerical simulation results, and a good consistency is found between the two. The drain current model is also validated with experimental results of a similar dimension device. The developed model can be a good reference for different $β$-Ga$_2$O$_3$-based HEMTs.

physics.app-ph↗

arXiv2021

Longitudinal charge distribution measurement of non-relativistic ion beams using coherent transition radiation

Longitudinal charge profile measurements or bunch shape measurements is a challenge for temporally short non-relativistic bunches. The field profile has a larger longitudinal extent compared to the charge profile for such beams. This affects the ability of field sensing devices such as phase pick-ups or wall current monitors to measure charge distribution. Here we evaluate the feasibility for usage of coherent transition and diffraction radiation from non-relativistic beams for bunch shape measurements.

physics.ins-det↗