arXiv subjects

R. Smits

Publications and source records attributed to R. Smits.

At least 37 records · Page 2Linked to original sources

arXiv2016

A millisecond pulsar in an extremely wide binary system

We report on 22 yrs of radio timing observations of the millisecond pulsar J1024$-$0719 by the telescopes participating in the European Pulsar Timing Array (EPTA). These observations reveal a significant second derivative of the pulsar spin frequency and confirm the discrepancy between the parallax and Shklovskii distances that has been reported earlier. We also present optical astrometry, photometry and spectroscopy of 2MASS J10243869$-$0719190. We find that it is a low-metallicity main-sequence star (K7V spectral type, $\mathrm{[M/H]}=-1.0$, $T_\mathrm{eff}=4050\pm50$ K) and that its position, proper motion and distance are consistent with those of PSR J1024$-$0719. We conclude that PSR J1024$-$0719 and 2MASS J10243869$-$0719190 form a common proper motion pair and are gravitationally bound. The gravitational interaction between the main-sequence star and the pulsar accounts for the spin frequency derivatives, which in turn resolves the distance discrepancy. Our observations suggest that the pulsar and main-sequence star are in an extremely wide ($P_\mathrm{b}>200$ yr) orbit. Combining the radial velocity of the companion and proper motion of the pulsar, we find that the binary system has a high spatial velocity of $384\pm45$ km s$^{-1}$ with respect to the local standard of rest and has a Galactic orbit consistent with halo objects. Since the observed main-sequence companion star cannot have recycled the pulsar to millisecond spin periods, an exotic formation scenario is required. We demonstrate that this extremely wide-orbit binary could have evolved from a triple system that underwent an asymmetric supernova explosion, though find that significant fine-tuning during the explosion is required. Finally, we discuss the implications of the long period orbit on the timing stability of PSR J1024$-$0719 in light of its inclusion in pulsar timing arrays.

astro-ph.HE↗

arXiv2016

High-precision timing of 42 millisecond pulsars with the European Pulsar Timing Array

We report on the high-precision timing of 42 radio millisecond pulsars (MSPs) observed by the European Pulsar Timing Array (EPTA). This EPTA Data Release 1.0 extends up to mid-2014 and baselines range from 7-18 years. It forms the basis for the stochastic gravitational-wave background, anisotropic background, and continuous-wave limits recently presented by the EPTA elsewhere. The Bayesian timing analysis performed with TempoNest yields the detection of several new parameters: seven parallaxes, nine proper motions and, in the case of six binary pulsars, an apparent change of the semi-major axis. We find the NE2001 Galactic electron density model to be a better match to our parallax distances (after correction from the Lutz-Kelker bias) than the M2 and M3 models by Schnitzeler (2012). However, we measure an average uncertainty of 80\% (fractional) for NE2001, three times larger than what is typically assumed in the literature. We revisit the transverse velocity distribution for a set of 19 isolated and 57 binary MSPs and find no statistical difference between these two populations. We detect Shapiro delay in the timing residuals of PSRs J1600$-$3053 and J1918$-$0642, implying pulsar and companion masses $m_p=1.22_{-0.35}^{+0.5} \text{M}_{\odot}$, $m_c = 0.21_{-0.04}^{+0.06} \text{M}_{\odot }$ and $m_p=1.25_{-0.4}^{+0.6} \text{M}_{\odot}$, $m_c = 0.23_{-0.05}^{+0.07} \text{M}_{\odot }$, respectively. Finally, we use the measurement of the orbital period derivative to set a stringent constraint on the distance to PSRs J1012$+$5307 and J1909$-$3744, and set limits on the longitude of ascending node through the search of the annual-orbital parallax for PSRs J1600$-$3053 and J1909$-$3744.

astro-ph.HE↗

arXiv2016

From Spin Noise to Systematics: Stochastic Processes in the First International Pulsar Timing Array Data Release

We analyse the stochastic properties of the 49 pulsars that comprise the first International Pulsar Timing Array (IPTA) data release. We use Bayesian methodology, performing model selection to determine the optimal description of the stochastic signals present in each pulsar. In addition to spin-noise and dispersion-measure (DM) variations, these models can include timing noise unique to a single observing system, or frequency band. We show the improved radio-frequency coverage and presence of overlapping data from different observing systems in the IPTA data set enables us to separate both system and band-dependent effects with much greater efficacy than in the individual PTA data sets. For example, we show that PSR J1643$-$1224 has, in addition to DM variations, significant band-dependent noise that is coherent between PTAs which we interpret as coming from time-variable scattering or refraction in the ionised interstellar medium. Failing to model these different contributions appropriately can dramatically alter the astrophysical interpretation of the stochastic signals observed in the residuals. In some cases, the spectral exponent of the spin noise signal can vary from 1.6 to 4 depending upon the model, which has direct implications for the long-term sensitivity of the pulsar to a stochastic gravitational-wave (GW) background. By using a more appropriate model, however, we can greatly improve a pulsar's sensitivity to GWs. For example, including system and band-dependent signals in the PSR J0437$-$4715 data set improves the upper limit on a fiducial GW background by $\sim 60\%$ compared to a model that includes DM variations and spin-noise only.

astro-ph.IM↗

arXiv2016

The International Pulsar Timing Array: First Data Release

The highly stable spin of neutron stars can be exploited for a variety of (astro-)physical investigations. In particular arrays of pulsars with rotational periods of the order of milliseconds can be used to detect correlated signals such as those caused by gravitational waves. Three such "Pulsar Timing Arrays" (PTAs) have been set up around the world over the past decades and collectively form the "International" PTA (IPTA). In this paper, we describe the first joint analysis of the data from the three regional PTAs, i.e. of the first IPTA data set. We describe the available PTA data, the approach presently followed for its combination and suggest improvements for future PTA research. Particular attention is paid to subtle details (such as underestimation of measurement uncertainty and long-period noise) that have often been ignored but which become important in this unprecedentedly large and inhomogeneous data set. We identify and describe in detail several factors that complicate IPTA research and provide recommendations for future pulsar timing efforts. The first IPTA data release presented here (and available online) is used to demonstrate the IPTA's potential of improving upon gravitational-wave limits placed by individual PTAs by a factor of ~2 and provides a 2-sigma limit on the dimensionless amplitude of a stochastic GWB of 1.7x10^{-15} at a frequency of 1 yr^{-1}. This is 1.7 times less constraining than the limit placed by (Shannon et al. 2015), due mostly to the more recent, high-quality data they used.

astro-ph.IM↗

arXiv2016

The noise properties of 42 millisecond pulsars from the European Pulsar Timing Array and their impact on gravitational wave searches

The sensitivity of Pulsar Timing Arrays to gravitational waves depends on the noise present in the individual pulsar timing data. Noise may be either intrinsic or extrinsic to the pulsar. Intrinsic sources of noise will include rotational instabilities, for example. Extrinsic sources of noise include contributions from physical processes which are not sufficiently well modelled, for example, dispersion and scattering effects, analysis errors and instrumental instabilities. We present the results from a noise analysis for 42 millisecond pulsars (MSPs) observed with the European Pulsar Timing Array. For characterising the low-frequency, stochastic and achromatic noise component, or "timing noise", we employ two methods, based on Bayesian and frequentist statistics. For 25 MSPs, we achieve statistically significant measurements of their timing noise parameters and find that the two methods give consistent results. For the remaining 17 MSPs, we place upper limits on the timing noise amplitude at the 95% confidence level. We additionally place an upper limit on the contribution to the pulsar noise budget from errors in the reference terrestrial time standards (below 1%), and we find evidence for a noise component which is present only in the data of one of the four used telescopes. Finally, we estimate that the timing noise of individual pulsars reduces the sensitivity of this data set to an isotropic, stochastic GW background by a factor of >9.1 and by a factor of >2.3 for continuous GWs from resolvable, inspiralling supermassive black-hole binaries with circular orbits.

astro-ph.IM↗

arXiv2015

LEAP: the large European array for pulsars

The Large European Array for Pulsars (LEAP) is an experiment that harvests the collective power of Europe's largest radio telescopes in order to increase the sensitivity of high-precision pulsar timing. As part of the ongoing effort of the European Pulsar Timing Array (EPTA), LEAP aims to go beyond the sensitivity threshold needed to deliver the first direct detection of gravitational waves. The five telescopes presently included in LEAP are: the Effelsberg telescope, the Lovell telescope at Jodrell Bank, the Nan\c cay radio telescope, the Sardinia Radio Telescope and the Westerbork Synthesis Radio Telescope. Dual polarization, Nyquist-sampled time-series of the incoming radio waves are recorded and processed offline to form the coherent sum, resulting in a tied-array telescope with an effective aperture equivalent to a 195-m diameter circular dish. All observations are performed using a bandwidth of 128 MHz centered at a frequency of 1396 MHz. In this paper, we present the design of the LEAP experiment, the instrumentation, the storage and transfer of data, and the processing hardware and software. In particular, we present the software pipeline that was designed to process the Nyquist-sampled time-series, measure the phase and time delays between each individual telescope and a reference telescope and apply these delays to form the tied-array coherent addition. The pipeline includes polarization calibration and interference mitigation. We also present the first results from LEAP and demonstrate the resulting increase in sensitivity, which leads to an improvement in the pulse arrival times.

astro-ph.IM↗

arXiv2015

Limits on anisotropy in the nanohertz stochastic gravitational-wave background

The paucity of observed supermassive black hole binaries (SMBHBs) may imply that the gravitational wave background (GWB) from this population is anisotropic, rendering existing analyses sub-optimal. We present the first constraints on the angular distribution of a nanohertz stochastic GWB from circular, inspiral-driven SMBHBs using the $2015$ European Pulsar Timing Array data [Desvignes et al. (in prep.)]. Our analysis of the GWB in the $\sim 2 - 90$ nHz band shows consistency with isotropy, with the strain amplitude in $l>0$ spherical harmonic multipoles $\lesssim 40\%$ of the monopole value. We expect that these more general techniques will become standard tools to probe the angular distribution of source populations.

astro-ph.HE↗

arXiv2015

Single pulse and profile variability study of PSR J1022+1001

Millisecond pulsars (MSPs) are known as highly stable celestial clocks. Nevertheless, recent studies have revealed the unstable nature of their integrated pulse profiles, which may limit the achievable pulsar timing precision. In this paper, we present a case study on the pulse profile variability of PSR J1022+1001. We have detected approximately 14,000 sub-pulses (components of single pulses) in 35-hr long observations, mostly located at the trailing component of the integrated profile. Their flux densities and fractional polarisation suggest that they represent the bright end of the energy distribution in ordinary emission mode and are not giant pulses. The occurrence of sub-pulses from the leading and trailing components of the integrated profile is shown to be correlated. For sub-pulses from the latter, a preferred pulse width of approximately 0.25 ms has been found. Using simultaneous observations from the Effelsberg 100-m telescope and the Westerbork Synthesis Radio Telescope, we have found that the integrated profile varies on a timescale of a few tens of minutes. We show that improper polarisation calibration and diffractive scintillation cannot be the sole reason for the observed instability. In addition, we demonstrate that timing residuals generated from averages of the detected sub-pulses are dominated by phase jitter, and place an upper limit of ~700 ns for jitter noise based on continuous 1-min integrations.

astro-ph.HE↗

arXiv2014

A 24-Hour Global Campaign To Assess Precision Timing of the Millisecond Pulsar J1713+0747

The radio millisecond pulsar J1713+0747 is regarded as one of the highest-precision clocks in the sky, and is regularly timed for the purpose of detecting gravitational waves. The International Pulsar Timing Array collaboration undertook a 24-hour global observation of PSR J1713+0747 in an effort to better quantify sources of timing noise in this pulsar, particularly on intermediate (1 - 24 hr) timescales. We observed the pulsar continuously over 24 hr with the Arecibo, Effelsberg, GMRT, Green Bank, LOFAR, Lovell, Nancay, Parkes, and WSRT radio telescopes. The combined pulse times-of-arrival presented here provide an estimate of what sources of timing noise, excluding DM variations, would be present as compared to an idealized root-N improvement in timing precision, where N is the number of pulses analyzed. In the case of this particular pulsar, we find that intrinsic pulse phase jitter dominates arrival time precision when the S/N of single pulses exceeds unity, as measured using the eight telescopes that observed at L-band/1.4 GHz. We present first results of specific phenomena probed on the unusually long timescale (for a single continuous observing session) of tens of hours, in particular interstellar scintillation, and discuss the degree to which scintillation and profile evolution affect precision timing. This paper presents the data set as a basis for future, deeper studies.

astro-ph.HE↗

arXiv2014

Model-based asymptotically optimal dispersion measure correction for pulsar timing

In order to reach the sensitivity required to detect gravitational waves, pulsar timing array experiments need to mitigate as much noise as possible in timing data. A dominant amount of noise is likely due to variations in the dispersion measure. To correct for such variations, we develop a statistical method inspired by the maximum likelihood estimator and optimal filtering. Our method consists of two major steps. First, the spectral index and amplitude of dispersion measure variations are measured via a time-domain spectral analysis. Second, the linear optimal filter is constructed based on the model parameters found in the first step, and is used to extract the dispersion measure variation waveforms. Compared to current existing methods, this method has better time resolution for the study of short timescale dispersion variations, and generally produces smaller errors in waveform estimations. This method can process irregularly sampled data without any interpolation because of its time-domain nature. Furthermore, it offers the possibility to interpolate or extrapolate the waveform estimation to regions where no data is available. Examples using simulated data sets are included for demonstration.

astro-ph.IM↗

arXiv2012

The optimal schedule for pulsar timing array observations

In order to maximize the sensitivity of pulsar timing arrays to a stochastic gravitational wave background, we present computational techniques to optimize observing schedules. The techniques are applicable to both single and multi-telescope experiments. The observing schedule is optimized for each telescope by adjusting the observing time allocated to each pulsar while keeping the total amount of observing time constant. The optimized schedule depends on the timing noise characteristics of each individual pulsar as well as the performance of instrumentation. Several examples are given to illustrate the effects of different types of noise. A method to select the most suitable pulsars to be included in a pulsar timing array project is also presented.

astro-ph.IM↗

arXiv2011

Placing limits on the stochastic gravitational-wave background using European Pulsar Timing Array data

Direct detection of low-frequency gravitational waves ($10^{-9} - 10^{-8}$ Hz) is the main goal of pulsar timing array (PTA) projects. One of the main targets for the PTAs is to measure the stochastic background of gravitational waves (GWB) whose characteristic strain is expected to approximately follow a power-law of the form $h_c(f)=A (f/\hbox{yr}^{-1})^α$, where $f$ is the gravitational-wave frequency. In this paper we use the current data from the European PTA to determine an upper limit on the GWB amplitude $A$ as a function of the unknown spectral slope $α$ with a Bayesian algorithm, by modelling the GWB as a random Gaussian process. For the case $α=-2/3$, which is expected if the GWB is produced by supermassive black-hole binaries, we obtain a 95% confidence upper limit on $A$ of $6\times 10^{-15}$, which is 1.8 times lower than the 95% confidence GWB limit obtained by the Parkes PTA in 2006. Our approach to the data analysis incorporates the multi-telescope nature of the European PTA and thus can serve as a useful template for future intercontinental PTA collaborations.

astro-ph.CO↗

arXiv2011

Gravitational wave astronomy of single sources with a pulsar timing array

Abbreviated: We investigate the potential of detecting the gravitational wave from individual binary black hole systems using pulsar timing arrays (PTAs) and calculate the accuracy for determining the GW properties. This is done in a consistent analysis, which at the same time accounts for the measurement of the pulsar distances via the timing parallax. We find that, at low redshift, a PTA is able to detect the nano-Hertz GW from super massive black hole binary systems with masses of $\sim10^8 - 10^{10}\,M_{\sun}$ less than $\sim10^5$\,years before the final merger, and those with less than $\sim10^3 - 10^4$ years before merger may allow us to detect the evolution of binaries. We derive an analytical expression to describe the accuracy of a pulsar distance measurement via timing parallax. We consider five years of bi-weekly observations at a precision of 15\,ns for close-by ($\sim 0.5 - 1$\,kpc) pulsars. Timing twenty pulsars would allow us to detect a GW source with an amplitude larger than $5\times 10^{-17}$. We calculate the corresponding GW and binary orbital parameters and their measurement precision. The accuracy of measuring the binary orbital inclination angle, the sky position, and the GW frequency are calculated as functions of the GW amplitude. We note that the "pulsar term", which is commonly regarded as noise, is essential for obtaining an accurate measurement for the GW source location. We also show that utilizing the information encoded in the GW signal passing the Earth also increases the accuracy of pulsar distance measurements. If the gravitational wave is strong enough, one can achieve sub-parsec distance measurements for nearby pulsars with distance less than $\sim 0.5 - 1$\,kpc.

astro-ph.HE↗

arXiv2011

Evidence for gravitational quadrupole moment variations in the companion of PSR J2051-0827

We have conducted radio timing observations of the eclipsing millisecond binary pulsar J2051-0827 with the European Pulsar Timing Array network of telescopes and the Parkes radio telescope, spanning over 13 years. The increased data span allows significant measurements of the orbital eccentricity, e = (6.2 {\pm} 1.3) {\times} 10^{-5} and composite proper motion, μ_t = 7.3 {\pm} 0.4 mas/yr. Our timing observations have revealed secular variations of the projected semi-major axis of the pulsar orbit which are much more extreme than those previously published; and of the orbital period of the system. Investigation of the physical mechanisms producing such variations confirm that the variations of the semi-major axis are most probably caused by classical spin-orbit coupling in the binary system, while the variations in orbital period are most likely caused by tidal dissipation leading to changes in the gravitational quadrupole moment of the companion.

astro-ph.GA↗

arXiv2011

Prospects for accurate distance measurements of pulsars with the SKA: enabling fundamental physics

Parallax measurements of pulsars allow for accurate measurements of the interstellar electron density and contribute to accurate tests of general relativity using binary systems. The Square Kilometre Array (SKA) will be an ideal instrument for measuring the parallax of pulsars, because it has a very high sensitivity, as well as baselines extending up to several thousands of kilometres. We performed simulations to estimate the number of pulsars for which the parallax can be measured with the SKA and the distance to which a parallax can be measured. We compare two different methods. The first method measures the parallax directly by utilising the long baselines of the SKA to form high angular resolution images. The second method uses the arrival times of the radio signals of pulsars to fit a transformation between time coordinates in the terrestrial frame and the comoving pulsar frame directly yielding the parallax. We find that with the first method a parallax with an accuracy of 20% or less can be measured up to a maximum distance of 13 kpc, which would include 9,000 pulsars. By timing pulsars with the most stable arrival times for the radio emission, parallaxes can be measured for about 3,600 millisecond pulsars up to a distance of 9 kpc with an accuracy of 20%.

astro-ph.IM↗

arXiv2010

Pulsars with the Australian Square Kilometre Array Pathfinder

The Australian Square Kilometre Array Pathfinder (ASKAP) is a 36-element array with a 30-square-degree field of view being built at the proposed SKA site in Western Australia. We are conducting a Design Study for pulsar observations with ASKAP, planning both timing and search observations. We provide an overview of the ASKAP telescope and an update on pulsar-related progress.

astro-ph.IM↗

arXiv2009

Pulsar science with the Five hundred metre Aperture Spherical Telescope

With a collecting area of 70 000 m^2, the Five hundred metre Aperture Spherical Telescope (FAST) will allow for great advances in pulsar astronomy. We have performed simulations to estimate the number of previously unknown pulsars FAST will find with its 19-beam or possibly 100-beam receivers for different survey strategies. With the 19-beam receiver, a total of 5200 previously unknown pulsars could be discovered in the Galactic plane, including about 460 millisecond pulsars (MSPs). Such a survey would take just over 200 days with eight hours survey time per day. We also estimate that, with about 80 six-hour days, a survey of M31 and M33 could yield 50--100 extra-Galactic pulsars. A 19-beam receiver would produce just under 500 MB of data per second and requires about 9 tera-ops to perform the major part of a real time analysis. We also simulate the logistics of high-precision timing of MSPs with FAST. Timing of the 50 brightest MSPs to a signal-to-noise of 500 would take about 24 hours per epoch.

astro-ph.IM↗

arXiv2008

Pulsar searches and timing with the SKA

The Square Kilometre Array (SKA) is a planned multi purpose radio telescope with a collecting area approaching 1 million square metres. One of the key science objectives of the SKA is to provide exquisite strong-field tests of gravitational physics by finding and timing pulsars in extreme binary systems such as a pulsar-black hole binary. To find out how three preliminary SKA configurations will affect a pulsar survey, we have simulated SKA pulsar surveys for each configuration. We estimate that the total number of normal pulsars the SKA will detect, using only the 1-km core and 30 minutes integration time, is around 14000 normal pulsar and 6000 millisecond pulsars. We describe a simple strategy for follow-up timing observations and find that, depending on the configuration, it would take 1-6 days to obtain a single timing point for 14000 pulsars. Obtaining a single timing point for the high-precision timing projects of the SKA, will take less than 14 hours, 2 days, or 3 days, depending on the configuration. The presence of aperture arrays will be of great benefit here. We also study the computational requirements for beam forming and data analysis for a pulsar survey. Beam forming of the full field of view of the single-pixel feed 15-m dishes using the 1-km core of the SKA requires about 2.2*10^15 operations per second. The corresponding data rate from such a pulsar survey is about 4.7*10^11 bytes per second. The required computational power for a deep real time analysis is estimated to be 1.2*10^16 operations per second. For an aperture array or dishes equipped with phased array feeds, the survey can be performed faster, but the computational requirements and data rates will go up.

astro-ph↗