Searcharxiv⌕ Search

arXiv subjects

R. T. James McAteer

Publications and source records attributed to R. T. James McAteer.

35 records · Page 2Linked to original sources

Coronal Mass Ejection Mass, Energy, and Force Estimates Using STEREO

Understanding coronal mass ejection (CME) energetics and dynamics has been a long-standing problem, and although previous observational estimates have been made, such studies have been hindered by large uncertainties in CME mass. Here, the two vantage points of the Solar Terrestrial Relations Observatory (STEREO) COR1 and COR2 coronagraphs were used to accurately estimate the mass of the 2008 December 12 CME. Acceleration estimates derived from the position of the CME front in 3-D were combined with the mass estimates to calculate the magnitude of the kinetic energy and driving force at different stages of the CME evolution. The CME asymptotically approaches a mass of 3.4\pm1.0x10^15 g beyond ~10 R_sun. The kinetic energy shows an initial rise towards 6.3\pm3.7x10^29 erg at ~3 R_sun, beyond which it rises steadily to 4.2\pm2.5x10^30 erg at ~18 R_sun. The dynamics are described by an early phase of strong acceleration, dominated by a force of peak magnitude of 3.4\pm2.2x10^14N at ~3 R_sun, after which a force of 3.8\pm5.4x10^13 N takes affect between ~7-18 R_sun. These results are consistent with magnetic (Lorentz) forces acting at heliocentric distances of <7 R_sun, while solar wind drag forces dominate at larger distances (>7 R_sun).

astro-ph.SR↗

Sequential Chomospheric Brightening: An Automated Approach to Extracting Physics from Ephemeral Brightening

We make a comparison between small scale chromospheric brightenings and energy release processes through examining the temporal evolution of sequential chromospheric brightenings (SCBs), derive propagation velocities, and propose a connection of the small-scale features to solar flares. Our automated routine detects and distinguishes three separate types of brightening regularly observed in the chromosphere: plage, flare ribbon, and point brightenings. By studying their distinct dynamics, we separate out the flare-associated bright points commonly known as SCBs and identify a propagating Moreton wave. Superimposing our detections on complementary off-band images, we extract a Doppler velocity measurement beneath the point brightening locations. Using these dynamic measurements, we put forward a connection between point brightenings, the erupting flare, and overarching magnetic loops. A destabilization of the pre-flare loop topology by the erupting flare directly leads to the SCBs observed.

astro-ph.SR↗

Properties of Sequential Chromospheric Brightenings and Associated Flare Ribbons

We report on the physical properties of solar sequential chromospheric brightenings (SCBs) observed in conjunction with moderate-sized chromospheric flares with associated CMEs. To characterize these ephemeral events, we developed automated procedures to identify and track subsections (kernels) of solar flares and associated SCBs using high resolution H-alpha images. Following the algorithmic identification and a statistical analysis, we compare and find the following: SCBs are distinctly different from flare kernels in their temporal characteristics of intensity, Doppler structure, duration, and location properties. We demonstrate that flare ribbons are themselves made up of subsections exhibiting differing characteristics. Flare kernels are measured to have a mean propagation speed of 0.2 km/s and a maximum speed of 2.3 km/s over a mean distance of 5 x 10^3 km. Within the studied population of SCBs, different classes of characteristics are observed with coincident negative, positive, or both negative and positive Doppler shifts of a few km/s. The appearance of SCBs precede peak flare intensity by ~12 minutes and decay ~1 hour later. They are also found to propagate laterally away from flare center in clusters at 41 km/s or 89 km/s. Given SCBs distinctive nature compared to flares, we suggest a different physical mechanism relating to their origin than the associated flare. We present a heuristic model of the origin of SCBs.

astro-ph.SR↗

Toward Reliable Benchmarking of Solar Flare Forecasting Methods

Solar flares occur in complex sunspot groups, but it remains unclear how the probability of producing a flare of a given magnitude relates to the characteristics of the sunspot group. Here, we use Geostationary Operational Environmental Satellite X-ray flares and McIntosh group classifications from solar cycles 21 and 22 to calculate average flare rates for each McIntosh class and use these to determine Poisson probabilities for different flare magnitudes. Forecast verification measures are studied to find optimum thresholds to convert Poisson flare probabilities into yes/no predictions of cycle 23 flares. A case is presented to adopt the true skill statistic (TSS) as a standard for forecast comparison over the commonly used Heidke skill score (HSS). In predicting flares over 24 hr, the maximum values of TSS achieved are 0.44 (C-class), 0.53 (M-class), 0.74 (X-class), 0.54 (>=M1.0), and 0.46 (>=C1.0). The maximum values of HSS are 0.38 (C-class), 0.27 (M-class), 0.14 (X-class), 0.28 (>=M1.0), and 0.41 (>=C1.0). These show that Poisson probabilities perform comparably to some more complex prediction systems, but the overall inaccuracy highlights the problem with using average values to represent flaring rate distributions.

astro-ph.SR↗

Automated Solar Feature Detection for Space Weather Applications

The solar surface and atmosphere are highly dynamic plasma environments, which evolve over a wide range of temporal and spatial scales. Large-scale eruptions, such as coronal mass ejections, can be accelerated to millions of kilometres per hour in a matter of minutes, making their automated detection and characterisation challenging. Additionally, there are numerous faint solar features, such as coronal holes and coronal dimmings, which are important for space weather monitoring and forecasting, but their low intensity and sometimes transient nature makes them problematic to detect using traditional image processing techniques. These difficulties are compounded by advances in ground- and space- based instrumentation, which have increased the volume of data that solar physicists are confronted with on a minute-by-minute basis; NASA's Solar Dynamics Observatory for example is returning many thousands of images per hour (~1.5 TB/day). This chapter reviews recent advances in the application of images processing techniques to the automated detection of active regions, coronal holes, filaments, CMEs, and coronal dimmings for the purposes of space weather monitoring and prediction.

astro-ph.SR↗

Deceleration and Dispersion of Large-scale Coronal Bright Fronts

One of the most dramatic manifestations of solar activity are large-scale coronal bright fronts (CBFs) observed in extreme ultraviolet (EUV) images of the solar atmosphere. To date, the energetics and kinematics of CBFs remain poorly understood, due to the low image cadence and sensitivity of previous EUV imagers and the limited methods used to extract the features. In this paper, the trajectory and morphology of CBFs was determined in order to investigate the varying properties of a sample of CBFs, including their kinematics and pulse shape, dispersion, and dissipation. We have developed a semi-automatic intensity profiling technique to extract the morphology and accurate positions of CBFs in 2.5-10 min cadence images from STEREO/EUVI. The technique was applied to sequences of 171A and 195A images from STEREO/EUVI in order to measure the wave properties of four separate CBF events. Following launch at velocities of ~240-450kms^{-1} each of the four events studied showed significant negative acceleration ranging from ~ -290 to -60ms^{-2}. The CBF spatial and temporal widths were found to increase from ~50 Mm to ~200 Mm and ~100 s to ~1500 s respectively, suggesting that they are dispersive in nature. The variation in position-angle averaged pulse-integrated intensity with propagation shows no clear trend across the four events studied. These results are most consistent with CBFs being dispersive magnetoacoustic waves.

astro-ph.SR↗

Coronal Mass Ejection Detection using Wavelets, Curvelets and Ridgelets: Applications for Space Weather Monitoring

Coronal mass ejections (CMEs) are large-scale eruptions of plasma and magnetic feld that can produce adverse space weather at Earth and other locations in the Heliosphere. Due to the intrinsic multiscale nature of features in coronagraph images, wavelet and multiscale image processing techniques are well suited to enhancing the visibility of CMEs and supressing noise. However, wavelets are better suited to identifying point-like features, such as noise or background stars, than to enhancing the visibility of the curved form of a typical CME front. Higher order multiscale techniques, such as ridgelets and curvelets, were therefore explored to characterise the morphology (width, curvature) and kinematics (position, velocity, acceleration) of CMEs. Curvelets in particular were found to be well suited to characterising CME properties in a self-consistent manner. Curvelets are thus likely to be of benefit to autonomous monitoring of CME properties for space weather applications.

astro-ph.SR↗

Propagation of an Earth-directed coronal mass ejection in three dimensions

Solar coronal mass ejections (CMEs) are the most significant drivers of adverse space weather at Earth, but the physics governing their propagation through the heliosphere is not well understood. While stereoscopic imaging of CMEs with the Solar Terrestrial Relations Observatory (STEREO) has provided some insight into their three-dimensional (3D) propagation, the mechanisms governing their evolution remain unclear due to difficulties in reconstructing their true 3D structure. Here we use a new elliptical tie-pointing technique to reconstruct a full CME front in 3D, enabling us to quantify its deflected trajectory from high latitudes along the ecliptic, and measure its increasing angular width and propagation from 2-46 solar radii (approximately 0.2 AU). Beyond 7 solar radii, we show that its motion is determined by an aerodynamic drag in the solar wind and, using our reconstruction as input for a 3D magnetohydrodynamic simulation, we determine an accurate arrival time at the Lagrangian L1 point near Earth.

astro-ph.SR↗

Solar Magnetic Feature Detection and Tracking for Space Weather Monitoring

We present an automated system for detecting, tracking, and cataloging emerging active regions throughout their evolution and decay using SOHO Michelson Doppler Interferometer (MDI) magnetograms. The SolarMonitor Active Region Tracking (SMART) algorithm relies on consecutive image differencing to remove both quiet-Sun and transient magnetic features, and region-growing techniques to group flux concentrations into classifiable features. We determine magnetic properties such as region size, total flux, flux imbalance, flux emergence rate, Schrijver's R-value, R* (a modified version of R), and Falconer's measurement of non-potentiality. A persistence algorithm is used to associate developed active regions with emerging flux regions in previous measurements, and to track regions beyond the limb through multiple solar rotations. We find that the total number and area of magnetic regions on disk vary with the sunspot cycle. While sunspot numbers are a proxy to the solar magnetic field, SMART offers a direct diagnostic of the surface magnetic field and its variation over timescale of hours to years. SMART will form the basis of the active region extraction and tracking algorithm for the Heliophysics Integrated Observatory (HELIO).

astro-ph.SR↗

Characterising Complexity in Solar Magnetogram Data using a Wavelet-based Segmentation Method

The multifractal nature of solar photospheric magnetic structures are studied using the 2D wavelet transform modulus maxima (WTMM) method. This relies on computing partition functions from the wavelet transform skeleton defined by the WTMM method. This skeleton provides an adaptive space-scale partition of the fractal distribution under study, from which one can extract the multifractal singularity spectrum. We describe the implementation of a multiscale image processing segmentation procedure based on the partitioning of the WT skeleton which allows the disentangling of the information concerning the multifractal properties of active regions from the surrounding quiet-Sun field. The quiet Sun exhibits a average Hölder exponent $\sim -0.75$, with observed multifractal properties due to the supergranular structure. On the other hand, active region multifractal spectra exhibit an average Hölder exponent $\sim 0.38$ similar to those found when studying experimental data from turbulent flows.

astro-ph.SR↗

Evidence of a Plasmoid-Looptop Interaction and Magnetic Inflows During a Solar Flare/CME Eruptive Event

Observational evidence is presented for the merging of a downward-propagating plasmoid with a looptop kernel during an occulted limb event on 2007 January 25. RHESSI lightcurves in the 9-18 keV energy range, as well as that of the 245 MHz channel of the Learmonth Solar Observatory, show enhanced nonthermal emission in the corona at the time of the merging suggesting that additional particle acceleration took place. This was attributed to a secondary episode of reconnection in the current sheet that formed between the two merging sources. RHESSI images were used to establish a mean downward velocity of the plasmoid of 12 km/s. Complementary observations from the SECCHI suite of instruments onboard STEREO-Behind showed that this process occurred during the acceleration phase of the associated CME. From wavelet-enhanced EUVI, images evidence of inflowing magnetic field lines prior to the CME eruption is also presented. The derived inflow velocity was found to be 1.5 km/s. This combination of observations supports a recent numerical simulation of plasmoid formation, propagation and subsequent particle acceleration due to the tearing mode instability during current sheet formation.

astro-ph.SR↗

Automated Detection of Coronal Loops using a Wavelet Transform Modulus Maxima Method

We propose and test a wavelet transform modulus maxima method for the au- tomated detection and extraction of coronal loops in extreme ultraviolet images of the solar corona. This method decomposes an image into a number of size scales and tracks enhanced power along each ridge corresponding to a coronal loop at each scale. We compare the results across scales and suggest the optimum set of parameters to maximise completeness while minimising detection of noise. For a test coronal image, we compare the global statistics (e.g., number of loops at each length) to previous automated coronal-loop detection algorithms.

astro-ph.SR↗

Turbulence, Complexity, and Solar Flares

The issue of predicting solar flares is one of the most fundamental in physics, addressing issues of plasma physics, high-energy physics, and modelling of complex systems. It also poses societal consequences, with our ever-increasing need for accurate space weather forecasts. Solar flares arise naturally as a competition between an input (flux emergence and rearrangement) in the photosphere and an output (electrical current build up and resistive dissipation) in the corona. Although initially localised, this redistribution affects neighbouring regions and an avalanche occurs resulting in large scale eruptions of plasma, particles, and magnetic field. As flares are powered from the stressed field rooted in the photosphere, a study of the photospheric magnetic complexity can be used to both predict activity and understand the physics of the magnetic field. The magnetic energy spectrum and multifractal spectrum are highlighted as two possible approaches to this.

astro-ph.SR↗

Reconstructing the 3-D Trajectories of CMEs in the Inner Heliosphere

A method for the full three-dimensional (3-D) reconstruction of the trajectories of coronal mass ejections (CMEs) using Solar TErrestrial RElations Observatory (STEREO) data is presented. Four CMEs that were simultaneously observed by the inner and outer coronagraphs (COR1 and 2) of the Ahead and Behind STEREO satellites were analysed. These observations were used to derive CME trajectories in 3-D out to ~15Rsun. The reconstructions using COR1/2 data support a radial propagation model. Assuming pseudo-radial propagation at large distances from the Sun (15-240Rsun), the CME positions were extrapolated into the Heliospheric Imager (HI) field-of-view. We estimated the CME velocities in the different fields-of-view. It was found that CMEs slower than the solar wind were accelerated, while CMEs faster than the solar wind were decelerated, with both tending to the solar wind velocity.

astro-ph.SR↗

The kinematics of coronal mass ejections using multiscale methods

The diffuse morphology and transient nature of coronal mass ejections (CMEs) make them difficult to identify and track using traditional image processing techniques. We apply multiscale methods to enhance the visibility of the faint CME front. This enables an ellipse characterisation to objectively study the changing morphology and kinematics of a sample of events imaged by the Large Angle Spectrometric Coronagraph (LASCO) onboard the Solar and Heliospheric Observatory (SOHO) and the Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI) onboard the Solar Terrestrial Relations Observatory (STEREO). The accuracy of these methods allows us to test the CMEs for non-constant acceleration and expansion. We exploit the multiscale nature of CMEs to extract structure with a multiscale decomposition, akin to a Canny edge detector. Spatio-temporal filtering highlights the CME front as it propagates in time. We apply an ellipse parameterisation of the front to extract the kinematics (height, velocity, acceleration) and changing morphology (width, orientation). The kinematic evolution of the CMEs discussed in this paper have been shown to differ from existing catalogues. These catalogues are based upon running-difference techniques that can lead to over-estimating CME heights. Our resulting kinematic curves are not well-fitted with the constant acceleration model. It is shown that some events have high acceleration below $\sim$5 R$_{\sun}$. Furthermore, we find that the CME angular widths measured by these catalogues are over-estimated, and indeed for some events our analysis shows non-constant CME expansion across the plane-of-sky.

astro-ph.SR↗

The Kinematics of a Globally Propagating Disturbance in the Solar Corona

The kinematics of a globally propagating disturbance (also known as an ``EIT wave") is discussed using Extreme UltraViolet Imager (EUVI) data Solar Terrestrial Relations Observatory (STEREO). We show for the first time that an impulsively generated propagating disturbance has similar kinematics in all four EUVI passbands (304, 171, 195, and 284 A). In the 304 A passband the disturbance shows a velocity peak of 238+/-20 kms-1 within ~28 minutes of its launch, varying in acceleration from 76 ms-2 to -102 ms-2. This passband contains a strong contribution from a Si XI line (303.32 A) with a peak formation temperature of ~1.6 MK. The 304 A emission may therefore be coronal rather than chromospheric in origin. Comparable velocities and accelerations are found in the coronal 195 A passband, while lower values are found in the lower cadence 284 A passband. In the higher cadence 171 A passband the velocity varies significantly, peaking at 475+/-47 kms-1 within ~20 minutes of launch, with a variation in acceleration from 816 ms-2 to -413 ms-2. The high image cadence of the 171 A passband (2.5 minutes compared to 10 minutes for the similar temperature response 195 A passband) is found to have a major effect on the measured velocity and acceleration of the pulse, which increase by factors of ~2 and ~10, respectively. This implies that previously measured values (e.g., using EIT) may have been underestimated. We also note that the disturbance shows strong reflection from a coronal hole in both the 171 and 195 A passbands. The observations are consistent with an impulsively generated fast-mode magnetoacoustic wave.

astro-ph↗

The Influence of Magnetic Field on Oscillations in the Solar Chromosphere

Two sequences of solar images obtained by the Transition Region and Coronal Explorer in three UV passbands are studied using wavelet and Fourier analysis and compared to the photospheric magnetic flux measured by the Michelson Doppler Interferometer on the Solar Heliospheric Observatory to study wave behaviour in differing magnetic environments. Wavelet periods show deviations from the theoretical cutoff value and are interpreted in terms of inclined fields. The variation of wave speeds indicates that a transition from dominant fast-magnetoacoustic waves to slow modes is observed when moving from network into plage and umbrae. This implies preferential transmission of slow modes into the upper atmosphere, where they may lead to heating or be detected in coronal loops and plumes.

astro-ph↗