arXiv subjects

R. Takaku

Publications and source records attributed to R. Takaku.

3 recordsLinked to original sources

arXiv2026

DESHIMA 2.0: A 200-400 GHz Ultra-wideband Integrated Superconducting Spectrometer

DESHIMA (Deep Spectroscopic HIgh-redshift MApper) is a broadband integrated superconducting spectrometer (ISS) for millimeter (mm) / sub-millimeter (sub-mm) wave astronomy based on Kinetic Inductance Detectors (KIDs). This paper describes characterization of DESHIMA 2.0 in laboratory settings. The instrument features NbTiN superconducting microstrip (MS) filters with low-loss a-SiC:H dielectric and an ultra-wideband leaky-wave antenna. A laboratory setup was designed, incorporating the cryostat housing cryogenic optics and ISS chip comprising 339 KIDs connected to MS filters tuned for (sub-)mm wave frequencies. Room-temperature mirrors on a hexapod stage allowed precise positioning and alignment of optical elements. The sky-position chopper was positioned on a motor-controlled stage for fine-tuned control over its position and alignment. Thanks to the multiplexing capability of KIDs, we could simultaneously measure multiple performance metrics across the entire frequency range. We showed that DESHIMA 2.0 achieved significant improvements in performance compared to its predecessor (DESHIMA 1.0): measured instantaneous frequency coverage was 200$-$400 GHz with a mean filter $Q_{filter}$ of $340 \pm 50$; instrument efficiency reached $\sim8$ \%, indicating 4 times wider band coverage and 4 times higher sensitivity. The yield rate for MS filters exceeded 98 \%. The estimated aperture efficiency from measured beam patterns agreed well with the designed value of approximately 70 \%. The telescope far-field beam patterns calculated from measured beam patterns also exhibited good agreement with design specifications. We also demonstrated validity of a new method of absolute frequency calibration using the data from beam pattern measurement.

astro-ph.IM↗

arXiv2025

Requirements on bandpass resolution and measurement precision for LiteBIRD

In this work, we study the impact of an imperfect knowledge of the instrument bandpasses on the estimate of the tensor-to-scalar ratio $r$ in the context of the next-generation LiteBIRD satellite. We develop a pipeline to integrate over the bandpass transmission in both the time-ordered data (TOD) and the map-making processing steps. We introduce the systematic effect by having a mismatch between the ``real'', high resolution bandpass $τ$, entering the TOD, and the estimated one $τ_s$, used in the map-making. We focus on two aspects: the effect of degrading the $τ_s$ resolution, and the addition of a Gaussian error $σ$ to $τ_s$. To reduce the computational load of the analysis, the two effects are explored separately, for three representative LiteBIRD channels (40 GHz, 140 GHz and 402 GHz) and for three bandpass shapes. Computing the amount of bias on $r$, $Δr$, caused by these effects on a single channel, we find that a resolution $\lesssim 1.5$ GHz and $σ\lesssim 0.0089$ do not exceed the LiteBIRD budget allocation per systematic effect, $Δr < 6.5 \times 10^{-6}$. We then check that propagating separately the uncertainties due to a resolution of 1 GHz and a measurement error with $σ= 0.0089$ in all LiteBIRD frequency channels, for the most pessimistic bandpass shape of the three considered, still produces a $Δr < 6.5 \times 10^{-6}$. This is done both with the simple deprojection approach and with a blind component separation technique, the Needlet Internal Linear Combination (NILC). Due to the effectiveness of NILC in cleaning the systematic residuals, we have tested that the requirement on $σ$ can be relaxed to $σ\lesssim 0.05$. (Abridged)

astro-ph.CO↗

arXiv2020

Broadband, millimeter-wave anti-reflective structures on sapphire ablated with femto-second laser

We designed, fabricated, and measured anti-reflection coating (ARC) on sapphire that has 116% fractional bandwidth and transmission of at least 97% in the millimeter wave band. The ARC was based on patterning pyramid-like sub-wavelength structures (SWS) using ablation with a 15 W femto-second laser operating at 1030 nm. One side of each of two discs was fabricated with SWS that had a pitch of 0.54 mm and height of 2 mm. The average ablation volume removal rate was 1.6 mm$^{3}$/min. Measurements of the two-disc sandwich show transmission higher than 97% between 43 and 161 GHz. We characterize instrumental polarization (IP) arising from differential transmission due to asymmetric SWS. We find that with proper alignment of the two disc sandwich RMS IP across the band is predicted to be 0.07% at normal incidence, and less than 0.6% at incidence angles up to 20 degrees. These results indicate that laser ablation of SWS on sapphire and on other hard materials such as alumina is an effective way to fabricate broad-band ARC.

astro-ph.IM↗