Searcharxiv⌕ Search

arXiv subjects

R. Venkatesha Prasad

Publications and source records attributed to R. Venkatesha Prasad.

18 recordsLinked to original sources

GreenScan: Towards large-scale terrestrial monitoring the health of urban trees using mobile sensing

Healthy urban greenery is a fundamental asset to mitigate climate change phenomena such as extreme heat and air pollution. However, urban trees are often affected by abiotic and biotic stressors that hamper their functionality, and whenever not timely managed, even their survival. While the current greenery inspection techniques can help in taking effective measures, they often require a high amount of human labor, making frequent assessments infeasible at city-wide scales. In this paper, we present GreenScan, a ground-based sensing system designed to provide health assessments of urban trees at high spatio-temporal resolutions, with low costs. The system utilises thermal and multi-spectral imaging sensors fused using a custom computer vision model in order to estimate two tree health indexes. The evaluation of the system was performed through data collection experiments in Cambridge, USA. Overall, this work illustrates a novel approach for autonomous mobile ground-based tree health monitoring on city-wide scales at high temporal resolutions with low-costs.

eess.SY↗

Open Gimbal: A 3 Degrees of Freedom Open Source Sensing and Testing Platform for Nano and Micro UAVs

Testing the aerodynamics of micro- and nano-UAVs without actually flying is highly challenging. To address this issue, we introduce Open Gimbal, a specially designed 3 Degrees of Freedom platform that caters to the unique requirements of micro- and nano-UAVs. This platform allows for unrestricted and free rotational motion, enabling comprehensive experimentation and evaluation of these UAVs. Our approach focuses on simplicity and accessibility. We developed an open-source, 3D printable electro-mechanical design that has minimal size and low complexity. This design facilitates easy replication and customization, making it widely accessible to researchers and developers. Addressing the challenges of sensing flight dynamics at a small scale, we have devised an integrated wireless batteryless sensor subsystem. Our innovative solution eliminates the need for complex wiring and instead uses wireless power transfer for sensor data reception. To validate the effectiveness of open gimbal, we thoroughly evaluate and test its communication link and sensing performance using a typical nano-quadrotor. Through comprehensive testing, we verify the reliability and accuracy of open gimbal in real-world scenarios. These advancements provide valuable tools and insights for researchers and developers working with mUAVs and nUAVs, contributing to the progress of this rapidly evolving field.

eess.SY↗

BEAVIS: Balloon Enabled Aerial Vehicle for IoT and Sensing

UAVs are becoming versatile and valuable platforms for various applications. However, the main limitation is their flying time. We present BEAVIS, a novel aerial robotic platform striking an unparalleled trade-off between the manoeuvrability of drones and the long lasting capacity of blimps. BEAVIS scores highly in applications where drones enjoy unconstrained mobility yet suffer from limited lifetime. A nonlinear flight controller exploiting novel, unexplored, aerodynamic phenomena to regulate the ambient pressure and enable all translational and yaw degrees of freedom is proposed without direct actuation in the vertical direction. BEAVIS has built-in rotor fault detection and tolerance. We explain the design and the necessary background in detail. We verify the dynamics of BEAVIS and demonstrate its distinct advantages, such as agility, over existing platforms including the degrees of freedom akin to a drone with 11.36x increased lifetime. We exemplify the potential of BEAVIS to become an invaluable platform for many applications.

cs.RO↗

Towards Enabling High-Five Over WiFi

The next frontier for immersive applications is enabling sentience over the Internet. Tactile Internet (TI) envisages transporting skills by providing Ultra-Low Latency (ULL) communications for transporting touch senses. In this work, we focus our study on the first/last mile communication, where the future generation WiFi-7 is pitched as the front-runner for ULL applications. We discuss a few candidate features of WiFi-7 and highlight its major pitfalls with respect to ULL communication. Further, through a specific implementation of WiFi-7 (vanilla WiFi-7) in our custom simulator, we demonstrate the impact of one of the pitfalls - standard practice of using jitter buffer in conjunction with frame aggregation - on TI communication. To circumvent this, we propose Non-Buffered Scheme (NoBuS) - a simple MAC layer enhancement for enabling TI applications on WiFi-7. NoBuS trades off packet loss for latency enabling swift synchronization between the master and controlled domains. Our findings reveal that employing NoBuS yields a significant improvement in RMSE of TI signals. Further, we show that the worst-case WiFi latency with NoBuS is 3.72 ms - an order of magnitude lower than vanilla WiFi-7 even under highly congested network conditions.

cs.NI↗

ETVO: Effectively Measuring Tactile Internet with Experimental Validation

The next frontier in communications is teleoperation -- manipulation and control of remote environments with feedback. Compared to conventional networked applications, teleoperation poses widely different requirements, ultra-low latency (ULL) is primary. Realizing ULL communication demands significant redesign of conventional networking techniques, and the network infrastructure envisioned for achieving this is termed as Tactile Internet (TI). The design of the network infrastructure and meaningful performance metrics are crucial for seamless TI communication. However, existing performance metrics fall severely short of comprehensively characterizing TI performance. We take the first step towards bridging this gap. We take Dynamic Time Warping(DTW) as the basis of our work and identify necessary changes for characterizing TI performance. Through substantial refinements to DTW, we design Effective Time- and Value-Offset (ETVO) -- a new method for measuring the fine-grained performance of TI systems. Through an in-depth objective analysis, we demonstrate the improvements of ETVO over DTW. Through human-in-the-loop subjective experiments, we demonstrate how and why existing QoS and QoE methods fall short of estimating the TI session performance accurately. Using subjective experiments, we demonstrate the behavior of the proposed metrics, their ability to match theoretically derived performance, and finally their ability to reflect user satisfaction in a practical setting. The results are highly encouraging.

cs.NI↗

FEEL: Fast, Energy-Efficient Localization for Autonomous Indoor Vehicles

Autonomous vehicles have created a sensation in both outdoor and indoor applications. The famous indoor use-case is process automation inside a warehouse using Autonomous Indoor Vehicles (AIV). These vehicles need to locate themselves not only with an accuracy of a few centimetres but also within a few milliseconds in an energy-efficient manner. Due to these challenges, localization is a holy grail. In this paper, we propose FEEL - an indoor localization system that uses a fusion of three low-energy sensors: IMU, UWB, and radar. We provide detailed software and hardware architecture of FEEL. Further, we propose Adaptive Sensing Algorithm (ASA) for opportunistically minimizing energy consumption of FEEL by adjusting the sensing frequency to the dynamics of the physical environment. Our extensive performance evaluation over diverse test settings reveal that FEEL provides a localization accuracy of <7cm with ultra-low latency of around 3ms. Further, ASA yields up to 20% energy saving with only a marginal trade-off in accuracy.

cs.RO↗

A simple Stochastic SIR model for COVID 19 Infection Dynamics for Karnataka: Learning from Europe

In this short note we model the region-wise trends of the evolution to COVID-19 infections using a stochastic SIR model. The SIR dynamics are expressed using \textit{Itô-stochastic differential equations}. We first derive the parameters of the model from the available daily data from European regions based on a 24-day history of infections, recoveries and deaths. The derived parameters have been aggregated to project future trends for the Indian subcontinent, which is currently at an early stage in the infection cycle. The projections are meant to serve as a guideline for strategizing the socio-political counter measures to mitigate COVID-19.

q-bio.PE↗

Setting the Yardstick: A Quantitative Metric for Effectively Measuring Tactile Internet

The next frontier in communications is teleoperation -- manipulation and control of remote environments. Compared to conventional networked applications, teleoperation poses widely different requirements, ultra-low latency (ULL) being the primary one. Teleoperation, along with a host of other applications requiring ULL communication, is termed as Tactile Internet (TI). A significant redesign of conventional networking techniques is necessary to realize TI applications. Further, these advancements can be evaluated only when meaningful performance metrics are available. However, existing TI performance metrics fall severely short of comprehensively characterizing TI performance. In this paper, we take the first step towards bridging this gap. To this end, we propose a method that captures the fine-grained performance of TI in terms of delay and precision. We take Dynamic Time Warping (DTW) as the basis of our work and identify whether it is sufficient in characterizing TI systems. We refine DTW by developing a framework called Effective Time- and Value-Offset (ETVO) that extracts fine-grained time and value offsets between input and output signals of TI. Using ETVO, we present two quantitative metrics for TI -- Effective Delay-Derivative (EDD) and Effective Root Mean Square Error. Through rigorous experiments conducted on a realistic TI setup, we demonstrate the potential of the proposed metrics to precisely characterize TI interactions.

cs.NI↗

Reinforcing Edge Computing with Multipath TCP Enabled Mobile Device Clouds

In recent years, enormous growth has been witnessed in the computational and storage capabilities of mobile devices. However, much of this computational and storage capabilities are not always fully used. On the other hand, popularity of mobile edge computing which aims to replace the traditional centralized powerful cloud with multiple edge servers is rapidly growing. In particular, applications having strict latency requirements can be best served by the mobile edge clouds due to a reduced round-trip delay. In this paper we propose a Multi-Path TCP (MPTCP) enabled mobile device cloud (MDC) as a replacement to the existing TCP based or D2D device cloud techniques, as it effectively makes use of the available bandwidth by providing much higher throughput as well as ensures robust wireless connectivity. We investigate the congestion in mobile-device cloud formation resulting mainly due to the message passing for service providing nodes at the time of discovery, service continuity and formation of cloud composition. We propose a user space agent called congestion handler that enable offloading of packets from one sub-flow to the other under link quality constraints. Further, we discuss the benefits of this design and perform preliminary analysis of the system.

cs.NI↗

Adaptive Beamwidth Selection for Contention Based Access Periods in Millimeter Wave WLANs

60GHz wireless local area networks (WLANs) standards (e.g., IEEE 802.11ad and IEEE 802.15.3c) employ hybrid MAC protocols consisting of contention based access using CSMA/CA as well as dedicated service periods using time division multiple access (TDMA). To provide the channel access in the contention part of the protocol, quasi omni (QO) antenna patterns are defined which span over the particular spatial directions and cover a limited area around access points. In this paper, we propose an algorithm to determine the beamwidth of each QO level. The proposed algorithm takes into account the spatial distribution of nodes to allocate the beamwidth of each QO level in an adaptive fashion in order to maximizes the channel utilization and satisfy the required link budget criterion. Since the proposed algorithm minimizes the collisions, it also minimizes the average time required to transmit total packets in a QO level. Proposed algorithm improves the average channel utilization up to 20-30% and reduces the time required to transmit total packets up to 40-50% for the given network parameters.

cs.NI↗

Association, Blockage and Handoffs in IEEE 802.11ad based 60GHz Picocells- A Closer Look

The link misalignment and high susceptibility to blockages are the biggest hurdles in realizing 60GHz based wireless local area networks (WLANs). However, much of the previous studies investigating 60GHz alignment and blockage issues do not provide an accurate quantitative evaluation from the perspective of WLANs. In this paper, we present an in-depth quantitative evaluation of commodity IEEE 802.11ad devices by forming a 60GHz WLAN with two docking stations mimicking as access points (APs). Through extensive experiments, we provide important insights about directional coverage pattern of antennas, communication range and co-channel interference and blockages. We are able to measure the IEEE 802.11ad link alignment and association overheads in absolute time units. With a very high accuracy (96-97%), our blockage characterization can differentiate between temporary and permanent blockages caused by humans in the indoor environment, which is a key insight. Utilizing our blockage characterization, we also demonstrate intelligent handoff to alternate APs using consumergrade IEEE 802.11ad devices. Our blockage-induced handoff experiments provide important insights that would be helpful in integrating millimeter wave based WLANs into future wireless networks.

cs.NI↗

Performance Analysis of IEEE 802.11ad MAC Protocol

IEEE 802.11ad specifies a hybrid medium access control (MAC) protocol consisting of contention as well as noncontention-based channel access mechanisms. Further, it also employs directional antennas to compensate for the high freespace path loss observed in 60GHz frequency band. Therefore, it significantly differs from other IEEE 802.11(b/g/n/ac) MAC protocols and thus requires new methods to analyze its performance. In this paper, we propose a new analytical model for performance analysis of IEEE 802.11ad employing a threedimensional Markov chain considering all the features of IEEE 802.11ad medium access mechanisms including the presence of non-contention access and the different number of sectors due to the use of directional antennas. We show that the number of sectors has a high impact on the network throughput. We also show that the MAC packet delay is significantly affected by the duration of the contention period. Our results indicate that a suitable choice of the number of sectors and contention period can illustriously improve the channel utilization and MAC delay performance.

cs.NI↗

Analyzing the Trade-offs in Using Millimeter Wave Directional Links for High Data Rate Tactile Internet Applications

Ultra-low latency and high reliability communications are the two defining characteristics of Tactile Internet (TI). Nevertheless, some TI applications would also require high data-rate transfer of audio-visual information to complement the haptic data. Using Millimeter wave (mmWave) communications is an attractive choice for high datarate TI applications due to the availability of large bandwidth in the mmWave bands. Moreover, mmWave radio access is also advantageous to attain the airinterface-diversity required for high reliability in TI systems as mmWave signal propagation significantly differs to sub-6GHz propagation. However, the use of narrow beamwidth in mmWave systems makes them susceptible to link misalignment-induced unreliability and high access latency. In this paper, we analyze the trade-offs between high gain of narrow beamwidth antennas and corresponding susceptibility to misalignment in mmWave links. To alleviate the effects of random antenna misalignment, we propose a beamwidth-adaptation scheme that significantly stabilize the link throughput performance.

cs.NI↗

Technical Report: Sleep-Route - Routing through Sleeping Sensors

In this article, we propose an energy-efficient data gathering scheme for wireless sensor network called Sleep-Route, which splits the sensor nodes into two sets - active and dormant (low-power sleep). Only the active set of sensor nodes participate in data collection. The sensing values of the dormant sensor nodes are predicted with the help of an active sensor node. Virtual Sensing Framework (VSF) provides the mechanism to predict the sensing values by exploiting the data correlation among the sensor nodes. If the number of active sensor nodes can be minimized, a lot of energy can be saved. The active nodes' selection must fulfill the following constraints - (i) the set of active nodes are sufficient to predict the sensing values of the dormant nodes, (ii) each active sensor nodes can report their data to the sink node (directly or through some other active node(s)). The goal is to select a minimal number of active sensor nodes so that energy savings can be maximized. The optimal set of active node selection raise a combinatorial optimization problem, which we refer as Sleep-Route problem. We show that Sleep-Route problem is NP-hard. Then, we formulate an integer linear program (ILP) to solve the problem optimally. To solve the problem in polynomial time, we also propose a heuristic algorithm that performs near optimally.

cs.NI↗

CogCell: Cognitive Interplay between 60GHz Picocells and 2.4/5GHz Hotspots in the 5G Era

Rapid proliferation of wireless communication devices and the emergence of a variety of new applications have triggered investigations into next-generation mobile broadband systems, i.e., 5G. Legacy 2G--4G systems covering large areas were envisioned to serve both indoor and outdoor environments. However, in the 5G-era, 80\% of overall traffic is expected to be generated in indoors. Hence, the current approach of macro-cell mobile network, where there is no differentiation between indoors and outdoors, needs to be reconsidered. We envision 60\,GHz mmWave picocell architecture to support high-speed indoor and hotspot communications. We envisage the 5G indoor network as a combination of-, and interplay between, 2.4/5\,GHz having robust coverage and 60\,GHz links offering high datarate. This requires an intelligent coordination and cooperation. We propose 60\,GHz picocellular network architecture, called CogCell, leveraging the ubiquitous WiFi. We propose to use 60\,GHz for the data plane and 2.4/5GHz for the control plane. The hybrid network architecture considers an opportunistic fall-back to 2.4/5\,GHz in case of poor connectivity in the 60\,GHz domain. Further, to avoid the frequent re-beamforming in 60\,GHz directional links due to mobility, we propose a cognitive module -- a sensor-assisted intelligent beam switching procedure -- which reduces the communication overhead. We believe that the CogCell concept will help future indoor communications and possibly outdoor hotspots, where mobile stations and access points collaborate with each other to improve the user experience.

cs.NI↗

Sensor Assisted Movement Identification and Prediction for Beamformed 60 GHz Links: A Report

Large available bandwidth in 60\,GHz band promises very high data rates -- in the order of Gb/s. However, high free-space path loss makes it necessary to employ beamforming capable directional antennas. When beamforming is used, the links are sensitive to misalignment in antenna directionality because of movement of devices. To identify and circumvent the misalignments, we propose to use the motion sensors (i.e., accelerometer and gyroscope) which are already present in most of the modern mobile devices. By finding the extent of misaligned beams, corrective actions are carried out to reconfigure the antennas. Motion sensors on mobile devices provide means to estimate the extent of misalignments. We collected real data from motion sensors and steer the beams appropriately. The results from our study show that the sensors are capable of detecting the cause of errors as translational or rotational movements. Furthermore it is also shown that the sensor data can be used to predict the next location of the user. This can be used to reconfigure the directional antenna to switch the antenna beam directions and hence avoid frequent link disruptions. This decreases the number of beam searches thus lowering the MAC overhead.

cs.NI↗

60 GHz MAC Standardization: Progress and Way Forward

Communication at mmWave frequencies has been the focus in the recent years. In this paper, we discuss standardization efforts in 60 GHz short range communication and the progress therein. We compare the available standards in terms of network architecture, medium access control mechanisms, physical layer techniques and several other features. Comparative analysis indicates that IEEE 802.11ad is likely to lead the short-range indoor communication at 60 GHz. We bring to the fore resolved and unresolved issues pertaining to robust WLAN connectivity at 60 GHz. Further, we discuss the role of mmWave bands in 5G communication scenarios and highlight the further efforts required in terms of research and standardization.

cs.NI↗

No-Sense: Sense with Dormant Sensors

Wireless sensor networks (WSNs) have enabled continuous monitoring of an area of interest (body, room, region, etc.) while eliminating expensive wired infrastructure. Typically in such applications, wireless sensor nodes report the sensed values to a sink node, where the information is required for the end-user. WSNs also provide the flexibility to the end-user for choosing several parameters for the monitoring application. For example, placement of sensors, frequency of sensing and transmission of those sensed data. Over the years, the advancement in embedded technology has led to increased processing power and memory capacity of these battery powered devices. However, batteries can only supply limited energy, thus limiting the lifetime of the network. In order to prolong the lifetime of the deployment, various efforts have been made to improve the battery technologies and also reduce the energy consumption of the sensor node at various layers in the networking stack. Of all the operations in the network stack, wireless data transmission and reception have found to consume most of the energy. Hence many proposals found in the literature target reducing them through intelligent schemes like power control, reducing retransmissions, etc. In this article we propose a new framework called Virtual Sensing Framework (VSF), which aims to sufficiently satisfy application requirements while conserving energy at the sensor nodes.

cs.NI↗