arXiv subjects

R. Vijay

Publications and source records attributed to R. Vijay.

At least 19 recordsLinked to original sources

arXiv2026

Universal Hamiltonian control in a planar trimon circuit

Multimode circuits provide an avenue for flexible control of single and multi-qubit gates. In this work we implement a multimode circuit known as a trimon integrated in a planar geometry. The trimon features three transmon-like modes with strong all-to-all $ZZ$ coupling. We demonstrate high fidelity operations on the trimon, achieving flexible control of its rich state space. This includes qubit rotations conditioned on one or both other qubits, unconditional single-qubit rotations, and both excitation-conserving and double-excitation two-qubit entangling gates. Through multi-tone driving we are able to implement all 16 two-qubit Pauli operators in the two-qubit space. We further demonstrate using the trimon as a qudit with up to 8 states and higher coherence than typical transmon-based implementations. Our results show a compact, highly controllable device that can potentially replace transmons in standard superconducting processor architectures.

quant-ph↗

arXiv2025

Light-Matter Interaction in dispersive Superconducting Circuit QED

It is well known that superconducting waveguides strongly attenuate the propagation of electromagnetic waves with frequencies beyond the superconducting gap. In circuit QED, the interaction between non-linear charge qubits and superconducting resonators invariably involves the qubit coupling to a large set of resonator modes. So far, strong dispersion effects near and beyond the superconducting-gap have been ignored in quantization models. Rather, it is assumed that the superconducting resonator behaves ideally across the large frequency intervals. We present a quantization approach which includes the superconducting frequency-dependent surface impedance and demonstrate that superconducting dispersion plays a role in determining the effective light-matter interaction cut-off.

quant-ph↗

arXiv2025

The quantromon: A qubit-resonator system with orthogonal qubit and readout modes

The measurement of a superconducting qubit is implemented by coupling it to a resonator. The common choice is transverse coupling, which, in the dispersive approximation, introduces an interaction term which enables the measurement. This cross-Kerr term provides a qubit-state dependent dispersive shift in the resonator frequency with the device parameters chosen carefully to get sufficient signal while minimizing Purcell decay of the qubit. We introduce a two-mode circuit, nicknamed quantromon, with two orthogonal modes implementing a qubit and a resonator. Unlike before, where the coupling term emerges as a perturbative expansion, the quantromon has intrinsic cross-Kerr coupling by design. Our experiments implemented in a hybrid 2D-3D cQED architecture demonstrate some unique features of the quantromon like weak dependence of the dispersive shift on the qubit-resonator detuning and intrinsic Purcell protection. In a tunable qubit-frequency device, we show that the dispersive shift ($2\chi/2\pi$) changes by only $0.8$ MHz while the qubit-resonator detuning ($\Delta/2\pi$) is varied between $0.398$ GHz - $3.288$ GHz. We also demonstrate Purcell protection in a second device where we tune the orthogonality between the two modes. Finally, we demonstrate a single-shot readout fidelity of $98.3\%$ without using a parametric amplifier which is comparable to the state-of-the-art and suggests a potential simplification of the measurement circuitry for scaling up quantum processors.

quant-ph↗

arXiv2022

Quantum noise limited microwave amplification using a graphene Josephson junction

Josephson junctions (JJ) and their tunable properties, including their nonlinearities, form the core of superconducting circuit quantum electrodynamics (cQED). In quantum circuits, low-noise amplification of feeble microwave signals is essential and the Josephson parametric amplifiers (JPA) are the widely used devices. The existing JPAs are based on Al-AlOx-Al tunnel junctions realized in a superconducting quantum interference device geometry, where magnetic flux is the knob for tuning the frequency. Recent experimental realizations of 2D van der Waals JJs provide an opportunity to implement various cQED devices with the added advantage of tuning the junction properties and the operating point using a gate potential. While other components of a possible 2D van der Waals cQED architecture have been demonstrated -- quantum noise limited amplifier, an essential component, has not been realized. Here we implement a quantum noise limited JPA, using a graphene JJ, that has linear resonance gate tunability of 3.5 GHz. We report 24 dB amplification with 10 MHz bandwidth and -130 dBm saturation power; performance on par with the best single-junction JPAs. Importantly, our gate tunable JPA works in the quantum-limited noise regime which makes it an attractive option for highly sensitive signal processing. Our work has implications for novel bolometers -- the low heat capacity of graphene together with JJ nonlinearity can result in an extremely sensitive microwave bolometer embedded inside a quantum noise-limited amplifier. In general, our work will open up exploration of scalable device architecture of 2D van der Waals materials by integrating a sensor with the quantum amplifier.

cond-mat.mes-hall↗

arXiv2022

Experimental validation of density functional theory calculations on the Zr/Al oxide nanocluster formation in bcc Fe

Ab initio simulations carried out in different atomic cluster configurations in bcc Fe matrix containing Zr and Al suggest energetic favorability of Y-Zr-O phase nucleation, preferably with trigonal Y4Zr3O12 structure. Subsequently, the HRTEM investigation of the as-prepared Fe - 14 Cr-0.3 Y2O3 - 0.6 Zr - 4Al oxide dispersion strengthened (ODS) alloy shows 78% of precipitates with Y4Zr3O12 structure, thereby confirming the predictive power of ab initio simulations on the secondary formation in multi-component alloys.

cond-mat.mtrl-sci↗

arXiv2021

Interfacial strain relief by periodic dislocation doublets emerging from rotationally related orientation relationships of Y4Zr3O12 dispersions in ferrite matrix

The trigonal/bcc orientation relationships (ORs) and their likelihood of occurrence are extensively studied using dispersed Y4Zr3O12nano-precipitates in bcc Fe matrix by means of transmission electron microscopy, image simulations, and a crystallographic model. Two orientation relationships related by a rotation:[1-20]||[111] with (21-2)||(-110) and [1-20]||[111] with (00-3)||(-110), are established and periodic arrays of misfit dislocation doublets are identified at the strained interface in (110) for both ORs. Further eighteen energetically feasible ORs in Y4Zr3O12/bcc system are deduced by combining stereographic projections, which include the two predominant ORs in this study and other ORs in literature. The orientation relationship which generates the interface with a minimum number of dislocation doublets is the most frequent.

cond-mat.mtrl-sci↗

arXiv2020

Long-range connectivity in a superconducting quantum processor using a ring resonator

Qubit coherence and gate fidelity are typically considered the two most important metrics for characterizing a quantum processor. An equally important metric is inter-qubit connectivity as it minimizes gate count and allows implementing algorithms efficiently with reduced error. However, inter-qubit connectivity in superconducting processors tends to be limited to nearest neighbour due to practical constraints in the physical realization. Here, we introduce a novel superconducting architecture that uses a ring resonator as a multi-path coupling element with the qubits uniformly distributed throughout its circumference. Our planar design provides significant enhancement in connectivity over state of the art superconducting processors without any additional fabrication complexity. We theoretically analyse the qubit connectivity and experimentally verify it in a device capable of supporting up to twelve qubits where each qubit can be connected to nine other qubits. Our concept is scalable, adaptable to other platforms and has the potential to significantly accelerate progress in quantum computing, annealing, simulations and error correction.

quant-ph↗

arXiv2019

Engineering Cross Resonance Interaction in Multi-modal Quantum Circuits

Existing scalable superconducting quantum processors have only nearest-neighbor coupling. This leads to reduced circuit depth, requiring large series of gates to perform an arbitrary unitary operation in such systems. Recently, multi-modal devices have been demonstrated as a promising candidate for small quantum processor units. Always on longitudinal coupling in such circuits leads to implementation of native high fidelity multi-qubit gates. We propose an architecture using such devices as building blocks for a highly connected larger quantum circuit. To demonstrate a quantum operation between such blocks, a standard transmon is coupled to the multi-modal circuit using a 3D bus cavity giving rise to small exchange interaction between the transmon and one of the modes. We study the cross resonance interaction in such systems and characterize the entangling operation as well as the unitary imperfections and cross-talk as a function of device parameters. Finally, we tune up the cross resonance drive to implement multi-qubit gates in this architecture.

quant-ph↗

arXiv2019

Understanding the saturation power of Josephson Parametric Amplifiers made from SQUIDs arrays

We report on the implementation and detailed modelling of a Josephson Parametric Amplifier (JPA) made from an array of eighty Superconducting QUantum Interference Devices (SQUIDs), forming a non-linear quarter-wave resonator. This device was fabricated using a very simple single step fabrication process. It shows a large bandwidth (45 MHz), an operating frequency tunable between 5.9 GHz and 6.8 GHz and a large input saturation power (-117 dBm) when biased to obtain 20 dB of gain. Despite the length of the SQUID array being comparable to the wavelength, we present a model based on an effective non-linear LC series resonator that quantitatively describes these figures of merit without fitting parameters. Our work illustrates the advantage of using array-based JPA since a single-SQUID device showing the same bandwidth and resonant frequency would display a saturation power 15 dB lower.

cond-mat.mes-hall↗

arXiv2019

Multiplexed readout of four qubits in 3D cQED architecture using broadband JPA

We propose and demonstrate a frequency-multiplexed readout scheme in 3D cQED architecture. We use four transmon qubits coupled to individual rectangular cavities which are aperture-coupled to a common rectangular waveguide feedline. A coaxial to waveguide transformer at the other end of the feedline allows one to launch and collect the multiplexed signal. The reflected readout signal is amplified by an impedance engineered broadband parametric amplifier with 380 MHz of bandwidth. This provides us high fidelity single-shot readout of multiple qubits using compact microwave circuitry, an efficient way for scaling up to more qubits in 3D cQED.

quant-ph↗

arXiv2018

A programmable three-qubit superconducting processor with all-to-all connectivity

Superconducting circuits are at the forefront of quantum computing technology because of the unparalleled combination of good coherence, fast gates and flexibility in design parameters. The majority of experiments demonstrating small quantum algorithms in the superconducting architecture have used transmon qubits and transverse qubit-qubit coupling. However, efficient universal digital computing has remained a challenge due to the fact that majority of the state-of-art architectures rely on nearest-neighbor coupling in one or two dimensions. The limited connectivity and the availability of only two-qubit entangling gates result in inefficient implementation of algorithms with reduced fidelity. In this work, we present a programmable three-qubit processor, nicknamed "trimon", with strong all-to-all coupling and access to native three-qubit gates. We implement three-qubit version of various algorithms, namely Deutsch-Jozsa, Bernstein-Vazirani, Grover's search and the quantum Fourier transform, to demonstrate the performance of our processor. Our results show the potential of the trimon as a building block for larger systems with enhanced qubit-qubit connectivity.

quant-ph↗

arXiv2018

Multi-mode superconducting circuits for realizing strongly coupled multi-qubit processor units

Inter-qubit coupling and qubit connectivity in a processor are crucial for achieving high fidelity multi-qubit gates and efficient implementation of quantum algorithms. Typical superconducting processors employ relatively weak transverse inter-qubit coupling which are activated via frequency tuning or microwave drives. Here, we propose a class of multi-mode superconducting circuits which realize multiple transmon qubits with all-to-all longitudinal coupling. These "artificial molecules" directly implement a multi-dimensional Hilbert space that can be easily manipulated due to the always-on longitudinal coupling. We describe the basic technique to analyze such circuits, compute the relevant properties and discuss how to optimize them to create efficient small-scale quantum processors with universal programmability.

quant-ph↗

arXiv2017

Converting quasiclassical states into arbitrary Fock state superpositions in a superconducting cavity

We propose and experimentally demonstrate a new method to generate arbitrary Fock-state superpositions in a superconducting quantum circuit, where a qubit is dispersively coupled to a microwave cavity mode without the need of fine-frequency tuning. Here the qubit is used to conditionally modulate the probability amplitudes of the Fock state components of a coherent state to those of the desired superposition state, instead of pumping photons one by one into the cavity as in previous schemes. Our method does not require the adjustment of the qubit frequency during the cavity state preparation, and is more robust to noise and accumulation of experimental errors compared to previous ones. Using the method, we experimentally generate high-fidelity phase eigenstates under various Hilbert-space dimensions and squeezed states, which are useful for quantum walk and high-precision measurements.

quant-ph↗

arXiv2016

Implementation of pairwise longitudinal coupling in a three-qubit superconducting circuit

We present the "trimon", a multi-mode superconducting circuit implementing three qubits with all-to-all longitudinal coupling. This always-on interaction enables simple implementation of generalized controlled-NOT gates which form a universal set. Further, two of the three qubits are protected against Purcell decay while retaining measurability. We demonstrate high-fidelity state swapping operations between two qubits and characterize the coupling of all three qubits to a neighbouring transmon qubit. Our results offer a new paradigm for multi-qubit architecture with applications in quantum error correction, quantum simulations and quantum annealing.

quant-ph↗

arXiv2016

A two-fold quantum delayed-choice experiment in a superconducting circuit

We propose and experimentally demonstrate a two-fold quantum delayed-choice experiment where wave or particle nature of a superconducting interfering device can be post-selected twice after the interferometer. The wave-particle complementarity is controlled by a quantum which-path detector (WPD) in a superposition of its on and off states implemented through a superconducting cavity. The WPD projected to its on state records which-path information, which manifests the particle nature and destroys the interference associated with wave nature of the system. In our experiment, we can recover the interference signal through a quantum eraser even if the WPD has selected out the particle nature in the first round of delayed-choice detection, showing that a quantum WPD adds further unprecedented controllability to test of wave-particle complementarity through the peculiar quantum delayed-choice measurements.

quant-ph↗

arXiv2016

Experimental Quantum Randomness Processing

Coherently manipulating multipartite quantum correlations leads to remarkable advantages in quantum information processing. A fundamental question is whether such quantum advantages persist only by exploiting multipartite correlations, such as entanglement. Recently, Dale, Jennings, and Rudolph negated the question by showing that a randomness processing, quantum Bernoulli factory, using quantum coherence, is strictly more powerful than the one with classical mechanics. In this Letter, focusing on the same scenario, we propose a theoretical protocol that is classically impossible but can be implemented solely using quantum coherence without entanglement. We demonstrate the protocol by exploiting the high-fidelity quantum state preparation and measurement with a superconducting qubit in the circuit quantum electrodynamics architecture and a nearly quantum-limited parametric amplifier. Our experiment shows the advantage of using quantum coherence of a single qubit for information processing even when multipartite correlation is not present.

quant-ph↗

arXiv2016

Dynamical strong coupling and parametric amplification in mechanical modes of graphene drums

Mechanical resonators are ubiquitous in modern information technology. With the ability to couple them to electromagnetic and plasmonic modes, they hold the promise to be the key building blocks in future quantum information technology. Graphene based resonators are of interest for technological applications due to their high resonant frequencies, multiple mechanical modes, and low mass. The tension mediated non-linear coupling between various modes of the resonator can be excited in a controllable manner. Here, we engineer a graphene resonator to have large frequency tunability at low temperatures resulting in large intermodal coupling strength. We observe the emergence of new eigenmodes and amplification of the coupled modes using red and blue parametric excitation respectively. We demonstrate that the dynamical intermodal coupling is tunable. A cooperativity of 60 between two resonant modes of ~100 MHz is achieved in the strong coupling regime. The ability to dynamically control the coupling between high frequency eigenmodes of a mechanical system opens up possibility for quantum mechanical experiments at low temperatures.

cond-mat.mes-hall↗

arXiv2016

Broadband parametric amplification with impedance engineering: Beyond the gain-bandwidth product

We present an impedance engineered Josephson parametric amplifier capable of providing bandwidth beyond the traditional gain-bandwidth product. We achieve this by introducing a positive linear slope in the imaginary component of the input impedance seen by the Josephson oscillator using a $λ/2$ transformer. Our theoretical model predicts an extremely flat gain profile with a bandwidth enhancement proportional to the square root of amplitude gain. We experimentally demonstrate a nearly flat 20 dB gain over a 640 MHz band, along with a mean 1-dB compression point of -110 dBm and near quantum-limited noise. The results are in good agreement with our theoretical model.

cond-mat.mes-hall↗