Searcharxiv⌕ Search

arXiv subjects

R. Vijay

Publications and source records attributed to R. Vijay.

45 records · Page 3Linked to original sources

Analog information processing at the quantum limit with a Josephson ring modulator

Amplifiers are crucial in every experiment carrying out a very sensitive measurement. However, they always degrade the information by adding noise. Quantum mechanics puts a limit on how small this degradation can be. Theoretically, the minimum noise energy added by a phase preserving amplifier to the signal it processes amounts at least to half a photon at the signal frequency. In this article, we show that we can build a practical microwave device that fulfills the minimal requirements to reach the quantum limit. This is of importance for the readout of solid state qubits, and more generally, for the measurement of very weak signals in various areas of science. We also discuss how this device can be the basic building block for a variety of practical applications such as amplification, noiseless frequency conversion, dynamic cooling and production of entangled signal pairs.

cond-mat.mes-hall↗

Optimizing Anharmonicity in Nanoscale Weak Link Josephson Junction Oscillators

Josephson tunnel junctions are widely used as nonlinear elements in superconducting circuits such as low noise amplifiers and quantum bits. However, microscopic defects in the oxide tunnel barrier can produce low and high frequency noise which can potentially limit the coherence times and quality factors of resonant circuits. Weak link Josephson junctions are an attractive alternative provided that sufficient nonlinearity can be engineered. We compute the current phase relation for superconducting weak links, with dimensions comparable to the zero temperature coherence length, connected to two and three dimensional superconducting electrodes. Our results indicate that 50-100 nm long aluminum nanobridges connected with three dimensional banks can be used to construct nonlinear oscillators for bifurcation amplification. We also show that under static current bias, these oscillators have a sufficiently anharmonic energy level structure to form a qubit. Such weak link junctions thus present a practical new route for realizing sensitive quantum circuits.

cond-mat.supr-con↗

Measuring the Decoherence of a Quantronium Qubit with the Cavity Bifurcation Amplifier

Dispersive readouts for superconducting qubits have the advantage of speed and minimal invasiveness. We have developed such an amplifier, the Cavity Bifurcation Amplifier (CBA) [10], and applied it to the readout of the quantronium qubit [2]. It consists of a Josephson junction embedded in a microwave on-chip resonator. In contrast with the Josephson bifurcation amplifier [17], which has an on-chip capacitor shunting a junction, the resonator is based on a simple coplanar waveguide imposing a pre-determined frequency and whose other RF characteristics like the quality factor are easily controlled and optimized. Under proper microwave irradiation conditions, the CBA has two metastable states. Which state is adopted by the CBA depends on the state of a quantronium qubit coupled to the CBA's junction. Due to the MHz repetition rate and large signal to noise ratio we can show directly that the coherence is limited by 1/f gate charge noise when biased at the sweet spot - a point insensitive to first order gate charge fluctuations. This architecture lends itself to scalable quantum computing using a multi-resonator chip with multiplexed readouts.

cond-mat.supr-con↗

Dispersive microwave bifurcation of a superconducting resonator cavity incorporating a Josephson junction

We have observed the dynamical bistability of a microwave superconducting Fabry-Perot cavity incorporating a non-linear element in the form of Josephson tunnel junction. The effect, which is the analog of optical bistability, manifests itself in the transmission and reflection characteristics of the cavity and is governed by a competition between the wave amplitude dependence of the resonant frequency and the finite residence time of the field energy inside the cavity. This finite residence time is solely due to extraction of radiation from the cavity by the measurement process. The tight quantitative agreement with a simple model based on the Duffing oscillator equation shows that the nonlinearity, and hence the bifurcation phenomenon, is solely dispersive.

cond-mat.supr-con↗

RF bifurcation of a Josephson junction: microwave embedding circuit requirements

A Josephson tunnel junction which is RF-driven near a dynamical bifurcation point can amplify quantum signals. The bifurcation point will exist robustly only if the electrodynamic environment of the junction meets certain criteria. In this article we develop a general formalism for dealing with the non-linear dynamics of Josephson junction embedded in an arbitrary microwave circuit. We find sufficient conditions for the existence of the bifurcation regime: a) the embedding impedance of the junction need to present a resonance at a particular frequency $ω_{R}$, with the quality factor $Q$ of the resonance and the participation ratio $p$ of the junction satisfying $Qp\gg 1$, b) the drive frequency should be low frequency detuned away from $ω_{R}$ by more than $\sqrt{3}ω_{R}/(2Q)$.

cond-mat.supr-con↗

Dispersive measurements of superconducting qubit coherence with a fast, latching readout

The "quantronium" is a superconducting qubit consisting of a split Cooper pair box in which a large tunnel junction is inserted. This circuit has a special bias point where the Larmor frequency is, to first order, insensitive to fluctuations in the bias parameters -- the charge of the box island and the phase of the large junction. At this optimal working point, the state of the qubit can be determined by dispersive measurements that probe the second derivative of the state energy with respect to these bias parameters. We use the quantronium phase degree of freedom to perform a non-linear, dispersive measurement of its inductive response using bifurcation amplification. This novel readout projects the state of the qubit in a few nanoseconds, and its latching property allows us to record the resulting information in a few hundred nanoseconds. We have measured, using this technique, Rabi oscillations and Ramsey fringes with an improved signal to noise ratio and contrast. The speed of this new readout scheme also opens the door for a new class of experiments which would characterize the relaxation processes associated with the measurement protocol.

cond-mat.supr-con↗

The Josephson Bifurcation Amplifier for Quantum Measurements

We have constructed a new type of amplifier whose primary purpose is the readout of superconducting quantum bits. It is based on the transition of an RF-driven Josephson junction between two distinct oscillation states near a dynamical bifurcation point. The main advantages of this new amplifier are speed, high-sensitivity, low back-action, and the absence of on-chip dissipation. Using pulsed microwave techniques, we demonstrate bifurcation amplification in nanofabricated Al junctions and verify that the performance predicted by theory is attained.

cond-mat.supr-con↗

An RF-Driven Josephson Bifurcation Amplifier for Quantum Measurements

We have constructed a new type of amplifier whose primary purpose is the readout of superconducting quantum bits. It is based on the transition of an RF-driven Josephson junction between two distinct oscillation states near a dynamical bifurcation point. The main advantages of this new amplifier are speed, high-sensitivity, low back-action, and the absence of on-chip dissipation. Pulsed microwave reflection measurements on nanofabricated Al junctions show that actual devices attain the performance predicted by theory.

cond-mat.supr-con↗

Direct Observation of Dynamical Switching between Two Driven Oscillation States of a Josephson Junction

We performed a novel phase sensitive microwave reflection experiment which directly probes the dynamics of the Josephson plasma resonance in both the linear and non-linear regime. When the junction was driven below the plasma frequency into the non-linear regime, we observed for the first time the transition between two different dynamical states predicted for non-linear systems. In our experiment, this transition appears as an abrupt change in the reflected signal phase at a critical excitation power.

cond-mat.supr-con↗