arXiv subjects

R. Yamaguchi

Publications and source records attributed to R. Yamaguchi.

5 recordsLinked to original sources

arXiv2022

History-dependent deformation of a rotated granular pile governed by granular friction

We experimentally examined the history dependence of the rotation-induced granular deformation. As an initial state, we prepared a quasi-two-dimensional granular pile whose apex is at the rotational axis and its initial inclination is at the angle of repose. The rotation rate was increased from $0$ to $620$~(rpm) and then decreased back to $0$. During the rotation, deformation of the rotated granular pile was captured by a camera. From the acquired image data, granular friction coefficient $μ$ was measured as a function of the ratio between centrifugal force and gravity, $Γ$. To systematically evaluate the variation of $μ$ both in the increasing (spinning up) and decreasing (spinning down) rotation-rate regimes, surface profiles of the deformed granular piles were fitted to a model considering the force balance among gravity, friction, and centrifugal force at the surface. We found that $μ$ value grows in the increasing $Γ$ regime. However, when $Γ$ was reduced, $μ$ cannot recover its initial value. A part of the history-dependent behaviors of the rotated granular pile can be understood by the force balance model.

cond-mat.soft↗

arXiv2021

Deformation of a rotated granular pile governed by body-force-dependent friction

Although the gravity dependence of granular friction is crucial to understand various natural phenomena, its precise characterization is difficult. We propose a method to characterize granular friction under various gravity (body force) conditions controlled by centrifugal force; specifically, the deformation of a rotated granular pile was measured. To understand the mechanics governing the observed nontrivial deformation of this pile, we introduced an analytic model considering local force balance. The excellent agreement between the experimental data and theoretical model suggests that the deformation is simply governed by the net body force (sum of gravity and centrifugal force) and friction angle. The body-force dependence of granular friction was precisely measured from the experimental results. The results reveal that the grain shape affects the degree of body-force dependence of the granular friction.

cond-mat.soft↗

arXiv2021

Measurement of surface deformation and cohesion of a granular pile under the effect of centrifugal force

An experimental apparatus measuring free-surface deformation of a centrifuged granular pile is developed. By horizontally rotating a quasi two-dimensional granular pile whose apex is located at the vertical rotation axis, the resultant force of gravity and centrifuge yields the deformation of the granular pile. In this setup, centrifugal force depends on distance from the rotation axis whilst gravitational force is constant everywhere. Therefore, free-surface deformation by various centrifuge degrees can be systematically examined using this apparatus. In the system, a small unit consisting of a camera and computer is rotated with the granular sample to record the rotation-induced deformation. To evaluate the validity of the system, deformation of a rotated water surface is first measured and analyzed. The obtained data are properly explained by the theoretical parabolas without any fitting parameter. Next, we measure the deformation of non-cohesive and cohesive granular piles using the developed apparatus. Both granular samples show the significant deformation of granular pile and finally develop steep granular slopes on the side walls. However, details of the deformation processes depend on the cohesion strength. To quantitatively characterize the difference, the effective strength by cohesion and granular local-slope variations are analyzed based on the experimental results.

cond-mat.soft↗

arXiv2020

Evaluation of Gadolinium's Action on Water Cherenkov Detector Systems with EGADS

Used for both proton decay searches and neutrino physics, large water Cherenkov (WC) detectors have been very successful tools in particle physics. They are notable for their large masses and charged particle detection capabilities. While current WC detectors reconstruct charged particle tracks over a wide energy range, they cannot efficiently detect neutrons. Gadolinium (Gd) has the largest thermal neutron capture cross section of all stable nuclei and produces an 8 MeV gamma cascade that can be detected with high efficiency. Because of the many new physics opportunities that neutron tagging with a Gd salt dissolved in water would open up, a large-scale R&D program called EGADS was established to demonstrate this technique's feasibility. EGADS features all the components of a WC detector, chiefly a 200-ton stainless steel water tank furnished with 240 photo-detectors, DAQ, and a water system that removes all impurities in water while keeping Gd in solution. In this paper we discuss the milestones towards demonstrating the feasibility of this novel technique, and the features of EGADS in detail.

physics.ins-det↗

arXiv2011

The γ-ray production in neutral-current neutrino oxygen interaction in the energy range above 100 MeV

We calculate the cross section of the gamma-ray production from neutral-current neutrino-oxygen quasi-elastic interaction, $ν+\^{16}O \rightarrow ν+p+^{15}N*$, or $ν+^{16}O \rightarrow ν+n+^{15}O*$, in which the residual nuclei (15N* or 15O*) lead to the gamma-ray emission with gamma-ray energy >6 MeV at the branching ratio of 41%. Above 200 MeV, this cross section dominates over that of gamma-ray production from the inelastic reaction, $ν+^{16}O->ν+^{16}O*$. In the present calculation, spectral function and the spectroscopic factors of $1p_{1/2}, 1p_{3/2} and 1s_{1/2}$ states are essential. The gamma-ray production is dominated by the deexcitation of $1p_{3/2}$ state of the residual nucleus.

hep-ph↗