arXiv subjects

R. Zosiamliana

Publications and source records attributed to R. Zosiamliana.

8 recordsLinked to original sources

arXiv2026

A DFT and Machine Learning-Assisted Study on the Lattice Thermal Conductivity of LiCdSb for Thermoelectric Applications

By using first-principles density functional theory (DFT) and the Boltzmann transport equation, we have calculated the corresponding electronic and thermoelectric properties of LiCdSb. For calculating electron transport properties, accurate band-structure estimation is crucial. Hence, for the precise band gap calculation, we have implemented a hybrid functional HSE06, which is widely known for its high accuracy. To evaluate the thermoelectric performance of a material, the calculation of lattice thermal conductivity (Kl) is a key parameter. However, from a theoretical perspective, the calculation of lattice thermal conductivity is very complex and demands huge computational resources. Therefore, in this work, we have opted for an alternative method of machine-learning interatomic potentials (MLIPs) for the calculation of Kl. Our result of Kl=0.24 Wm^-1K^-1 at room temperature is in qualitative agreement with the available theoretical and experimental data. The figure of merit (ZT) with Kl estimated from Slack+TDEC ZT is 0.18 at 300 K, and machine learning (ML) models ZT is 0.17 at 300K, combining with HSE06-based electronic transport properties agreed well with the available experimentally reported value of ZT is 0.10 at 300K. However, we report the ZT value well above the benchmark value of 1 beyond 600K. The ZT value exceeding 1 at higher temperatures makes LiCdSb a promising material for high-temperature energy conversion.

cond-mat.mtrl-sci↗

arXiv2025

Interfacial effect on the optoelectronic and piezoelectric properties of Ge-Sn terminated Halide Perovskite heterostructure from first-principles study

Since the very early stages of research on sustainable technologies, green energy conversion has always been a prime focus. With the discoveries of countless functional materials in recent years, significant progress has been made to meet the global energy demand for sustainable development. Among them, halide perovskites have emerged as one of the most promising and reliable materials. In this work, we have investigated the lead-free halide perovskites, vis CsGeCl3 and RbSnBr3, within a framework of density functional theory (DFT) to explore their potential applicability in harvesting clean and renewable energy. This study gives a comprehensive analysis of the bulk, surface (001), and Ge-Sn-terminated interfaces within GGA and mGGA functionals. Interestingly, the inherent asymmetric arrangements of the systems exhibit remarkable optoelectronic and piezoelectric properties. The piezoelectric performance of each surface cut has been validated through the electromechanical coupling calculation.

cond-mat.mtrl-sci↗

arXiv2025

Cu2XSiS4 (X = Ge, Sn, and Pb) materials for solar-cell applications: A DFT+SCAPS-1D simulation

By means of the first-principles density functional theory (DFT), I2-II-IV-VI4 type Cu-based quaternary chalcogenides Cu 2 XSiS 4 (X = Ge, Sn, and Pb) have been thoroughly investigated. We report the study of Ge and Sn substitution in the divalent cation site for their potential applications in photovoltaics for the first time. The structural, electronic, optical, and mechanical properties have been calculated. The structural and thermal stability is verified by calculating the elastic constants, formation energy and total potential energy at 300 K from the ab-initio molecular dynamics (MD) simulation. The compounds under our investigation exhibited an indirect band gap in the range of 1.0--1.56 eV, suitable for energy harvesting by trapping the sunlight. The presence of absorption peaks within the visible region complements their potential in photovoltaic applications. For further validation, we have designed a model of a heterostructure (FTO/TiO2/Cu2XSiS4/CuO/Au) solar cell, and a numerical simulation has been performed by solving the Poisson equation and continuity equations to obtain the I-V characteristic by using SCAPS-1D. All the inputs needed for solar- cell simulation in SCAPS-1D have been taken from the DFT results. The corresponding Power Conversion Efficiency (PCE) is denoted by η% and their respective values for X=Ge, Sn and Pb are 23.46%, 23.29% and 22.60%, at room temperature. The Ge-based system exhibits the highest η%, owing to its band gap value in the visible range of the solar spectrum. Thus, we report that Ge-based compounds may act as a promising absorber layer in heterostructure solar-cell applications.

cond-mat.mtrl-sci↗

arXiv2025

A comprehensive first principles investigation of A$_2$BH$_6$ type (A= Li,Na, and K; B= Al, and Si) double perovskite hydrides for high capacity hydrogen storage

Recent breakthroughs in vacancy-ordered double perovskite hydride materials have underscored their significant potential for integration into next-generation high-capacity hydrogen energy storage systems. We perform extensive first principles calculations leveraging both the GGA and hybrid-HSE06 functionals to systematically explore the intrinsic properties of A$_2$BH$_6$ complex hydrides. Thermodynamic stability for each hydride is demonstrated and confirmed by negative formation energies, determined by both the GGA and HSE06 formalisms. Additionally, mechanical stability is validated through compliance with Born's stability criteria. Electronic properties analysis reveals a semiconducting behavior in Si based hydrides (A2SiH6 ), whereas Al based (A$_2$AlH$_6$) display metallic nature, regardless of the A site atoms and functionals adopted. For the semiconducting hydrides, we have observed higher optical absorption peak greater than 106 (1/cm) in the UV regime indicating potential application in UV-optoelectronic devices. Furthermore, all studied compounds adhere to Debye's low-temperature specific heat behavior and converge to the classical Dulong-Petit limit at elevated temperatures, in accordance with fundamental thermodynamic principles. For hydrogen storage applications, both Al- and Si-based hydrides. meet key benchmarks set by the U.S. Department of Energy (DOE), achieving gravimetric hydrogen capacities (C$_{wt}$) exceeding 5.5 percent when A = Li or Na, and exhibiting volumetric hydrogen densities greater than 40 g.H2/L. Among all studied hydrides, Li$_2$AlH$_6$ and Li$_2$SiH$_6$ emerge as the two most promising candidates due to their outstanding Cwt greater than 12.0 percent , elevated density greater than 140 g.H$_2$/L, and favorable hydrogen desorption temperature ranges TD = 450 to 650 K.

cond-mat.mtrl-sci↗

arXiv2025

Group-I lead oxide X$_2$PbO$_3$ (X=Li, Na, K, Rb, and Cs) glass-like materials for energy applications: A hybrid-DFT study

Pb-based compounds have garnered considerable theoretical and experimental attention due to their promising potential in energy-related applications. In this study, we explore the glass-like alkali metal lead oxides X$_2$PbO$_3$ (X=Li, Na, K, Rb, Cs) and assess their suitability for piezoelectric and thermoelectric applications. First-principles calculations were performed using hybrid density functional theory (DFT), incorporating B3LYP, HSE06, and PBE0 functionals. Among these, PBE0 is identified as the most accurate, yielding lattice parameters in close agreement with experimental data. Structural stability was confirmed through evaluation of thermal, mechanical, and formation energies. For the non-centrosymmetric orthorhombic phase Cmc2$_1$-X$_2$PbO$_3$ (X=K, Rb, Cs), piezoelectric constants were computed via both the numerical Berry phase (BP) method and the analytical Coupled Perturbed Hartree-Fock/Kohn-Sham (CPHF/KS) formalism. Notably, Cs$_2$PbO$_3$ exhibited a piezoelectric coefficient of e$_{33}$ = 0.60 C m$^{-2}$ (CPHF/KS), while K$_2$PbO$_3$ showed e$_{32}$ = -0.51 C m$^{-2}$ (BP). Thermoelectric properties were investigated using the semiclassical Boltzmann transport theory within the rigid band approximation. The calculated thermoelectric performance reveals promising figures of merit (ZT), ranging from 0.3 to 0.63, suggesting these materials are applicable as future thermoelectric materials.

cond-mat.mtrl-sci↗

arXiv2025

The study of electronic, structural, mechanical, and piezoelectric properties of bulk NbOX2 (X = Cl, Br, and I) using density functional theory

In this work, we have performed a comprehensive study of dielectric materials NbOX2 (X=Cl, Br, and I) within the framework of density functional theory, incorporating both conventional and hybrid functionals.Our studies focus on the structure, electronic, elastic, and piezoelectric properties. Piezoelectricity is an innovative avenue to extract energy by manipulating the material's structures via mechanical stress. The use of non-lead-based material for piezoelectricity added an advantage of a greener approach. Among the investigated materials, bulk NbOI2 exhibits the highest piezoelectric response of 6.32 C/m$^2$, which is around 31% higher than NbOCl2, NbOBr2 and even lead zirconate titanate.

cond-mat.mtrl-sci↗

arXiv2024

Recent progress on the solid-state materials for photocatalysis

Hydrogen is considered an alternative source of energy to fossil fuels for the fulfilment of current energy demands. Photocatalysis initiates the hydrogen evolution reaction which is believed to be the greenest approach to produce hydrogen through clean, safe, and environmentally friendly methods. In this Review, we focus mainly on the comprehensive analysis of the 2D and 3D bulk materials on the basis of their superior photocatalytic activities. However, several literatures have reported the superiority of 2D material over the bulk counterpart in terms of photocatalytic performance owing to their ultrathin layered structures, offer a higher surface-to-volume ratio, flexibility, large active sites for incoming H2O molecules, etc. We have thoroughly analysed the drawbacks of various hydrogen production methods focusing on the photocatalysis mechanism and the processes of evolution of hydrogen. In addition to this, a short overview of the various solid-state materials for photocatalysis that have been developed so far and their mechanisms are discussed. Lastly, we have discussed the recent developments in 2D materials and their composites as promising photocatalysts.

cond-mat.mtrl-sci↗

arXiv2024

Modulation of electronic and piezoelectric properties of lead-free halide perovskites LiSnX$_3$ (X = Cl, Br, and I) under applied pressure

Pb-based perovskites are considered to be the most efficient materials for energy harvest. However, real-time application is limited because of their toxicity. As a result, lead-free perovskites that offer similar advantages are potential alternatives. Here, we have chosen LiSnX$_3$ (X = Cl, Br, and I) for further calculation and explore its possibilities for harvesting clean and green energy. Our objective is to examine strategies for optimizing the parameters that control the energy-harvesting capabilities, particularly the interplay between structural variations and electrical properties. The density functional theory (DFT) has been employed for the theoretical simulation. Within the DFT framework, we have studied the effect of applied pressure (0 to 20 GPa) and elemental substitution on their physical properties. We hereby report the variation of lattice parameters, elastic constants, band gaps, and piezoelectric constants. MD simulation with time steps of up to 5 ps was performed to verify structural stability at room temperature. We report the semi-conducting characteristic of LiSnX$_3$ and the high piezoelectric response up to 20.7 Cm2. The presence of high piezoelectric coefficients suggests that manipulation of the structure of LiSnX$_3$ may provide an alternative way to harvest energy through electromechanical processes.

cond-mat.mtrl-sci↗