arXiv subjects

Rachel Montgomery

Publications and source records attributed to Rachel Montgomery.

7 recordsLinked to original sources

arXiv2026

Compact sub-10 ps Resolution Radio Frequency Photomultiplier Tube

Experimental measurements of the radial spreading of photoelectrons emitted from a multi-alkali photocathode in a MCP-based photomultiplier tube have shown that, for photon wavelengths of 455 nm, 515 nm and 625 nm, the maximum initial energies of the emitted photoelectrons are approximately 0.3 eV, 0.2 eV and 0.1 eV respectively. Combining these experimental results with simulations performed using the SIMION simulation package, a compact radio-frequency photoelectron multiplier tube with a temporal resolution better than 10 ps is proposed. The device would be suitable for applications in several fields, particularly in medical optical instruments employing time-correlated single-photon counting.

physics.ins-det↗

arXiv2026

A Helical-Deflector-Based Radio-Frequency Spiral Scanning System for keV Energy Electrons

We present the design, modeling, and experimental validation of a radio-frequency based time-to-position conversion system for keV electrons incorporating a helical deflector operating in the 400-1000 MHz range. The device performs circular deflection of the electrons when driven by a single RF frequency and enables spiral scanning when two phase-locked RF voltages with slightly different frequencies are applied. The superposition of the two phase-locked RF voltages produces an amplitude-beating field whose slowly varying envelope modulates the deflection radius, transforming the circular scan into a controlled spiral on the detector plane. A detailed theoretical model describing the electron dynamics under two phase-locked RF voltages with different frequencies was derived, yielding analytical expressions for the transverse velocity and radius-vector components at the deflector exit. The experimental studies demonstrated good agreement with the model predictions. Spiral scanning will allow measurements with picosecond resolution in a temporal dynamic range 1-2 orders of magnitude larger than the period of the circular scanning.

physics.ins-det↗

arXiv2025

Picosecond Precision Heavy-Ion Detector for {\Lambda} Hypernuclei Lifetime Studies

In this paper, we present the design and preliminary performance evaluation of a new heavy-ion detector for direct measurements of heavy {\Lambda} hypernuclei lifetime. The detector employs the previously developed 10 picosecond resolution Radio Frequency (RF) Timer, which converts the temporal information of incident particles into spatial coordinates of secondary or photoelectrons on a position-sensitive detector by means of circular RF scanning in the 500-1000 MHz range. Here, we report the detector design to achieve efficient suppression of accidental background and effective separation of prompt reaction products and delayed events from {\Lambda} hypernuclei decays, results of test studies carried out with RF synchronized laser as well as preliminary results obtained by using alpha particles. Dedicated Monte-Carlo simulations have been performed to estimate the detector's performance under realistic experimental conditions at RF-driven electron, photon, or proton beams. The results confirm the feasibility of the proposed design and provide a basis for upcoming experimental measurements, based on the delayed fission detection.

physics.ins-det↗

arXiv2022

Advanced Radio Frequency Timing AppaRATus (ARARAT) Technique and Applications

The development of the advanced Radio Frequency Timer of electrons is described. It is based on a helical deflector, which performs circular or elliptical sweeps of keV electrons, by means of 500 MHz radio frequency field. By converting a time distribution of incident electrons to a hit position distribution on a circle or ellipse, this device achieves extremely precise timing. Streak Cameras, based on similar principles, routinely operate in the ps and sub-ps time domain, but have substantial slow readout system. Here, we report a device, where the position sensor, consisting of microchannel plates and a delay-line anode, produces ~ns duration pulses which can be processed by using regular fast electronics. A photon sensor based on this technique, the Radio Frequency Photo-Multiplier Tube (RFPMT), has demonstrated a timing resolution of ~10 ps and a time stability of ~0.5 ps, FWHM. This makes the apparatus highly suited for Time Correlated Single Photon Counting which is widely used in optical microscopy and tomography of biological samples. The first application in lifetime measurements of quantum states of graphene, under construction at the A. I. Alikhanyan National Science Laboratory (AANL), is outlined. This is followed by a description of potential RFPMT applications in time-correlated Diffuse Optical Tomography, time-correlated Stimulated Emission Depletion microscopy, hybrid FRET/STED nanoscopy and Time-of-Flight Positron Emission Tomography.

physics.ins-det↗

arXiv2022

An RF Timer of Electrons and Photons with the Potential to reach Picosecond Precision

This paper describes a new radio frequency timer of keV energy electrons. It is based on a helical deflector, which performs circular or elliptical sweeps of keV electrons, by means of 500 MHz radio frequency field. By converting a time distribution of incident electrons to a hit position distribution on a circle or ellipse, this device achieves extremely precise timing. Streak Cameras, based on similar principles, routinely operate in the ps and sub-ps time domain, but have substantial dead time associated with the readout system. Here, we report a new type of RF timing technique, where the position sensor, consisting of microchannel plates and a delay-line anode, produces ~ns duration pulses with small dead time. Measurements made with sub-ps duration laser pulses, synchronized to the radio frequency power, produced a timing resolution of ~10 ps. This ultra-high precision technique has potential applications in a large variety of scientific devices, and in all cases, electrons are timed and detected simultaneously in the same device.

physics.ins-det↗

arXiv2021

Revealing the structure of light pseudoscalar mesons at the Electron-Ion Collider

How the bulk of the Universe's visible mass emerges and how it is manifest in the existence and properties of hadrons are profound questions that probe into the heart of strongly interacting matter. Paradoxically, the lightest pseudoscalar mesons appear to be the key to the further understanding of the emergent mass and structure mechanisms. These mesons, namely the pion and kaon, are the Nambu-Goldstone boson modes of QCD. Unravelling their partonic structure and the interplay between emergent and Higgs-boson mass mechanisms is a common goal of three interdependent approaches -- continuum QCD phenomenology, lattice-regularised QCD, and the global analysis of parton distributions -- linked to experimental measurements of hadron structure. Experimentally, the foreseen electron-ion collider will enable a revolution in our ability to study pion and kaon structure, accessed by scattering from the "meson cloud" of the proton through the Sullivan process. With the goal of enabling a suite of measurements that can address these questions, we examine key reactions to identify the critical detector system requirements needed to map tagged pion and kaon cross sections over a wide range of kinematics. The excellent prospects for extracting pion structure function and form factor data are shown, and similar prospects for kaon structure are discussed in the context of a worldwide programme. Successful completion of the programme outlined herein will deliver deep, far-reaching insights into the emergence of pions and kaons, their properties, and their role as QCD's Goldstone boson modes.

nucl-ex↗

arXiv2019

Pion and Kaon Structure at the Electron-Ion Collider

Understanding the origin and dynamics of hadron structure and in turn that of atomic nuclei is a central goal of nuclear physics. This challenge entails the questions of how does the roughly 1 GeV mass-scale that characterizes atomic nuclei appear; why does it have the observed value; and, enigmatically, why are the composite Nambu-Goldstone (NG) bosons in quantum chromodynamics (QCD) abnormally light in comparison? In this perspective, we provide an analysis of the mass budget of the pion and proton in QCD; discuss the special role of the kaon, which lies near the boundary between dominance of strong and Higgs mass-generation mechanisms; and explain the need for a coherent effort in QCD phenomenology and continuum calculations, in exa-scale computing as provided by lattice QCD, and in experiments to make progress in understanding the origins of hadron masses and the distribution of that mass within them. We compare the unique capabilities foreseen at the electron-ion collider (EIC) with those at the hadron-electron ring accelerator (HERA), the only previous electron-proton collider; and describe five key experimental measurements, enabled by the EIC and aimed at delivering fundamental insights that will generate concrete answers to the questions of how mass and structure arise in the pion and kaon, the Standard Model's NG modes, whose surprisingly low mass is critical to the evolution of our Universe.

nucl-ex↗