Searcharxiv⌕ Search

arXiv subjects

Radha Krishna Ganti

Publications and source records attributed to Radha Krishna Ganti.

At least 19 recordsLinked to original sources

Task-Oriented Candidate-Latent Feedback for Coarse-to-Fine Sensing in Distributed OFDM-ISAC Networks

Future integrated sensing and communication (ISAC) architectures separate the sensing entity (SE) that acquires measurements from the sensing function (SF) that performs inference, creating a need for compact, task-oriented feedback on the SE-SF interface. Forwarding the raw channel frequency response or full per-link delay-Doppler-azimuth-elevation (DDAE) tensor is prohibitively expensive, while peak-only reporting discards target-discriminative structure under clutter. We propose a learning-based coarse-to-fine sensing pipeline with candidate-latent feedback for single-target estimation. At the SE, a lightweight convolutional scorer produces a dense delay-Doppler proposal map from pilot-based OFDM channel estimates, and a learned encoder constructs K compact C-dimensional candidate tokens by fusing per-candidate azimuth-elevation patches, normalized position, and confidence cues. The latents are uniformly quantized post-training to b bits and transmitted under a finite budget B_fb = bKC + 18K + 16 bits to the SF, which performs cross-candidate refinement, reranking, and joint four-parameter estimation. On a ray-traced urban scene with static and dynamic clutter, three operating points in the (K, C, b) design space achieve 96.33-98.88% detection at 107-806 bytes per coherent processing interval, compression ratios of 1.2-9.2 x 10^4 over the 8-bit DDAE magnitude tensor, reducing the SE-SF interface from multi-Gbit/s to sub-Mbit/s rates. Cross-scene evaluation on an independent campus-scale environment achieves 98.79-99.50% detection and at-or-better angular accuracy without retraining, indicating that the learned representation captures target-relevant structure that transports across scenes of comparable or lower clutter density.

eess.SP↗

Enabling AI-Native Mobility in 6G: A Real-World Dataset for Handover, Beam Management, and Timing Advance

To address the issues of high interruption time and measurement report overhead under user equipment (UE) mobility especially in high speed 5G use cases the use of AI/ML techniques (AI/ML beam management and mobility procedures) have been proposed. These techniques rely heavily on data that are most often simulated for various scenarios and do not accurately reflect real deployment behavior or user traffic patterns. Therefore, there is an utmost need for realistic datasets under various conditions. This work presents a dataset collected from a commercially deployed network across various modes of mobility (pedestrian, bike, car, bus, and train) and at multiple speeds to depict real time UE mobility. When collecting the dataset, we focused primarily on handover (HO) scenarios, with the aim of reducing the HO interruption time and maintaining continuous throughput during and immediately after HO execution. To support this research, the dataset includes timing advance (TA) measurements at various signaling events such as RACH trigger, MAC CE, and PDCCH grant which are typically missing in existing works. We cover a detailed description of the creation of the dataset; experimental setup, data acquisition, and extraction. We also cover an exploratory analysis of the data, with a primary focus on mobility, beam management, and TA. We discuss multiple use cases in which the proposed dataset can facilitate understanding of the inference of the AI/ML model. One such use case is to train and evaluate various AI/ML models for TA prediction.

eess.SP↗

Characterization of Blind Code Rate Recovery in Linear Block Codes

Forward Error Correction (FEC) is used ubiquitously in the communication pipeline. We explore noncooperative decoding where we aim to recover the code rate of a linear block code. We present a metric to characterize the quality of the code rate recovery which uses any rank based estimation technique. We derive a closed form expression for this metric in terms of the algorithmic and the environmental parameters and assert that it should be low for good recovery. We use this metric to derive an expression for a better code rate estimate in high noise conditions and compare it with existing estimates. Finally we validate the derived expression for the metric and the improved performance in the code rate estimate by simulating the recovery of a Low Density Parity Check (LDPC) code. This also enables us to derive the optimal algorithmic parameters for recovery.

cs.IT↗

Machine Learning Decoder for 5G NR PUCCH Format 0

5G cellular systems depend on the timely exchange of feedback control information between the user equipment and the base station. Proper decoding of this control information is necessary to set up and sustain high throughput radio links. This paper makes the first attempt at using Machine Learning techniques to improve the decoding performance of the Physical Uplink Control Channel Format 0. We use fully connected neural networks to classify the received samples based on the uplink control information content embedded within them. The trained neural network, tested on real-time wireless captures, shows significant improvement in accuracy over conventional DFT-based decoders, even at low SNR. The obtained accuracy results also demonstrate conformance with 3GPP requirements.

cs.NI↗

UCINet0: A Machine Learning based Receiver for 5G NR PUCCH Format 0

Accurate decoding of Uplink Control Information (UCI) on the Physical Uplink Control Channel (PUCCH) is essential for enabling 5G wireless links. This paper explores an AI/ML-based receiver design for PUCCH Format 0. Format 0 signaling encodes the UCI content within the phase of a known base waveform and even supports multiplexing of up to 12 users within the same time-frequency resources. The proposed neural network classifier, which we term UCINet0, is capable of predicting when no user is transmitting on the PUCCH, as well as decoding the UCI content for any number of multiplexed users (up to 12). The test results with simulated, hardware-captured (lab) and field datasets show that the UCINet0 model outperforms conventional correlation-based decoders across all SNR ranges and multiple fading scenarios.

cs.NI↗

Study on Downlink CSI compression: Are Neural Networks the Only Solution?

Massive Multi Input Multi Output (MIMO) systems enable higher data rates in the downlink (DL) with spatial multiplexing achieved by forming narrow beams. The higher DL data rates are achieved by effective implementation of spatial multiplexing and beamforming which is subject to availability of DL channel state information (CSI) at the base station. For Frequency Division Duplexing (FDD) systems, the DL CSI has to be transmitted by User Equipment (UE) to the gNB and it constitutes a significant overhead which scales with the number of transmitter antennas and the granularity of the CSI. To address the overhead issue, AI/ML methods using auto-encoders have been investigated, where an encoder neural network model at the UE compresses the CSI and a decoder neural network model at the gNB reconstructs it. However, the use of AI/ML methods has a number of challenges related to (1) model complexity, (2) model generalization across channel scenarios and (3) inter-vendor compatibility of the two sides of the model. In this work, we investigate a more traditional dimensionality reduction method that uses Principal Component Analysis (PCA) and therefore does not suffer from the above challenges. Simulation results show that PCA based CSI compression actually achieves comparable reconstruction performance to commonly used deep neural networks based models.

eess.SP↗

Physical Layer Design for Ambient IoT

There is a growing demand for ultra low power and ultra low complexity devices for applications which require maintenance-free and battery-less operation. One way to serve such applications is through backscatter devices, which communicate using energy harvested from ambient sources such as radio waves transmitted by a reader. Traditional backscatter devices, such as RFID, are limited by range, interference, low connection density, and security issues. To address these problems, the Third Generation Partnership Project (3GPP) has started working on Ambient IoT (A-IoT). For the realization of A-IoT devices, various aspects ranging from physical layer design, to the protocol stack, to the device architecture should be standardized. In this paper, we provide an overview of the standardization efforts on the physical layer design for A-IoT devices. The various physical channels and signals are discussed, followed by link level simulations to compare the performance of various configurations of reader to device and device to reader channels.

eess.SP↗

Precoder Implementation and Optimization in 5G NR Massive MIMO Radio

The evolution of 5G New Radio (NR) has brought significant improvements in signal strength and service quality for users. By integrating Multiple Input Multiple Output (MIMO) systems into communications, multiple data streams can be transmitted simultaneously across multiple antennas. Additionally, the incorporation of precoding in MIMO systems enables enhanced data rates and spectral efficiency. In wireless networks, precoders are used to steer high-gain beams intended for specific users. This paper focuses on the implementation of 16, 32, and 64 channel linear precoders in the Remote Radio Head (RRH) of the indigenously developed 5G testbed at IIT Madras. These precoders include a memory module to store channel matrices and a multiplier module to perform matrix multiplications between the channel matrices and user data within a slot duration of 500 microseconds. The system demonstrates DSP utilization levels of 9.75%, 19.5%, and 39% for (16 x 8), (32 x 8), and (64 x 8) antenna-layer configurations, respectively, while maintaining Block RAM (BRAM) usage within 2.28%, 3.91%, and 7.16%. Additionally, a throughput of 1.2 Gbps with four active layers highlights the system's optimized performance under hardware constraints.

eess.SP↗

A Machine Learning based Hybrid Receiver for 5G NR PRACH

Random Access is a critical procedure using which a User Equipment (UE) identifies itself to a Base Station (BS). Random Access starts with the UE transmitting a random preamble on the Physical Random Access Channel (PRACH). In a conventional BS receiver, the UE's specific preamble is identified by correlation with all the possible preambles. The PRACH signal is also used to estimate the timing advance which is induced by propagation delay. Correlation-based receivers suffer from false peaks and missed detection in scenarios dominated by high fading and low signal-to-noise ratio. This paper describes the design of a hybrid receiver that consists of an AI/ML model for preamble detection followed by conventional peak detection for the Timing Advance estimation. The proposed receiver combines the Power Delay Profiles of correlation windows across multiple antennas and uses the combination as input to a Neural Network model. The model predicts the presence or absence of a user in a particular preamble window, after which the timing advance is estimated by peak detection. Results show superior performance of the hybrid receiver compared to conventional receivers both for simulated and real hardware-captured datasets.

eess.SP↗

On the Application of Deep Learning for Precise Indoor Positioning in 6G

Accurate localization in indoor environments is a challenge due to the Non Line of Sight (NLoS) nature of the signaling. In this paper, we explore the use of AI/ML techniques for positioning accuracy enhancement in Indoor Factory (InF) scenarios. The proposed neural network, which we term LocNet, is trained on measurements such as Channel Impulse Response (CIR) and Reference Signal Received Power (RSRP) from multiple Transmit Receive Points (TRPs). Simulation results show that when using measurements from 18 TRPs, LocNet achieves a 9 cm positioning accuracy at the 90th percentile. Additionally, we demonstrate that the same model generalizes effectively even when measurements from some TRPs randomly become unavailable. Lastly, we provide insights on the robustness of the trained model to the errors in ground truth labels used for training.

eess.SP↗

Optimum Beamforming and Grating Lobe Mitigation for Intelligent Reflecting Surfaces

Ensuring adequate wireless coverage in upcoming communication technologies such as 6G is expected to be challenging. This is because user demands of higher datarate require an increase in carrier frequencies, which in turn reduce the diffraction effects (and hence coverage) in complex multipath environments. Intelligent reflecting surfaces have been proposed as a way of restoring coverage by adaptively reflecting incoming electromagnetic waves in desired directions. This is accomplished by judiciously adding extra phases at different points on the surface. In practice, these extra phases are only available in discrete quantities due to hardware constraints. Computing these extra phases is computationally challenging when they can only be picked from a discrete distribution, and existing approaches for solving this problem were either heuristic or based on evolutionary algorithms. We solve this problem by proposing fast algorithms with provably optimal solutions. Our algorithms have linear complexity, and are presented with rigorous proofs for their optimality. We show that the proposed algorithms exhibit better performance. We analyze situations when unwanted grating lobes arise in the radiation pattern, and discuss mitigation strategies, such as the use of triangular lattices and prephasing techniques, to eliminate them. We also demonstrate how our algorithms can leverage these techniques to deliver optimum beamforming solutions.

eess.SP↗

Centimeter Positioning Accuracy using AI/ML for 6G Applications

This research looks at using AI/ML to achieve centimeter-level user positioning in 6G applications such as the Industrial Internet of Things (IIoT). Initial results show that our AI/ML-based method can estimate user positions with an accuracy of 17 cm in an indoor factory environment. In this proposal, we highlight our approaches and future directions.

cs.LG↗

Pilotless Uplink for Massive MIMO Systems

Massive MIMO OFDM waveforms help support a large number of users in the same time-frequency resource and also provide significant array gain for uplink reception in cellular systems. However, channel estimation in such large antenna systems can be tricky as pilot assignment for multiple users becomes more challenging with increasing number of users. Additionally, the pilot overhead especially for wideband rapidly changing channels can diminish the system throughput quite significantly. In this paper, we propose an iterative matrix decomposition algorithm for the blind demodulation of massive MIMO OFDM signals without using any pilots. This new decomposition technique provides estimates of both the user symbols and the user channel in the frequency domain simultaneously (to a scaling factor) without any pilots. We discuss methods for finding the appropriate initial points for the algorithm that ensure its convergence in different types of wireless channels. We also propose new methods for resolving the scaling factor in the estimated signal that do not increase pilot overhead. We show how the method can be adapted to both single-user and multi-user systems. Simulation results demonstrate that the lack of pilots does not affect the error performance of the proposed algorithm when compared to the conventional pilot-based channel estimation and equalization methods across a wide range of channels for both single and multi-user cases. We also demonstrate techniques to reduce the complexity of the estimation algorithm over multiple OFDM symbols in a 5G MIMO system by leveraging the temporal correlations in the channel.

cs.IT↗

Enhancements for 5G NR PRACH Reception: An AI/ML Approach

Random Access is an important step in enabling the initial attachment of a User Equipment (UE) to a Base Station (gNB). The UE identifies itself by embedding a Preamble Index (RAPID) in the phase rotation of a known base sequence, which it transmits on the Physical Random Access Channel (PRACH). The signal on the PRACH also enables the estimation of propagation delay, often known as Timing Advance (TA), which is induced by virtue of the UE's position. Traditional receivers estimate the RAPID and TA using correlation-based techniques. This paper presents an alternative receiver approach that uses AI/ML models, wherein two neural networks are proposed, one for the RAPID and one for the TA. Different from other works, these two models can run in parallel as opposed to sequentially. Experiments with both simulated data and over-the-air hardware captures highlight the improved performance of the proposed AI/ML-based techniques compared to conventional correlation methods.

cs.IT↗

Fronthaul Compression for Uplink Massive MIMO using Matrix Decomposition

Massive MIMO opens up attractive possibilities for next generation wireless systems with its large number of antennas offering spatial diversity and multiplexing gain. However, the fronthaul link that connects a massive MIMO Remote Radio Head (RRH) and carries IQ samples to the Baseband Unit (BBU) of the base station can throttle the network capacity/speed if appropriate data compression techniques are not applied. In this paper, we propose an iterative technique for fronthaul load reduction in the uplink for massive MIMO systems that utilizes the convolution structure of the received signals. We use an alternating minimisation algorithm for blind deconvolution of the received data matrix that provides compression ratios of 30-50. In addition, the technique presented here can be used for blind decoding of OFDM signals in massive MIMO systems.

cs.IT↗

QR Approximation for Massive MIMO Fronthaul Compression

Massive MIMO's immense potential to serve large number of users at fast data rates also comes with the caveat of requiring tremendous processing power. This favours a centralized radio access network (C-RAN) architecture that concentrates the processing power at a common baseband unit (BBU) connected to multiple remote radio heads (RRH) via fronthaul links. The high bandwidths of 5G make the fronthaul data rate a major bottleneck. Since the number of active users in a massive MIMO system is much smaller than the number of antennas, we propose a dimension reduction scheme based on low rank approximation for fronthaul data compression. Link level simulations show that the proposed method achieves more than 17x compression while also improving the error performance of the system through denoising.

eess.SP↗

Interference Characterization in Downlink Li-Fi Optical Attocell Networks

Wireless access to data using visible light, popularly known as light-fidelity (Li-Fi), is one of the key emerging technologies which promises huge bandwidths and data rates. In Li-Fi, the data is modulated on optical intensities and transmitted and detected using light-emitting-diodes (LED) and photodiodes respectively. A network of such LED access points illuminates a given region in the form of attocells. Akin, to wireless networks, co-channel interference or simply interference is a major impediment in Li-Fi attocell networks. Also, when in such networks, the field-of-view (FOV) of a photodiode is limited, the network interference distribution gets affected significantly. So, for any given network scenario, interference characterization is critical for good system design. Currently, there are no good closed-form approximations to interference in Li-Fi attocell networks, that can be used for the analysis of signal-to-interference-plus-noise-ratio (or coverage), particularly for the case of limited FOVs. In this paper, using a technique from Fourier analysis, we provide a very close approximation to interference in one and two dimension Li-Fi attocell networks for any given finite inter-LED separation. We validate the interference approximation by providing theoretical error bounds using asymptotics and by performing numerical simulations. We show that our method of approximation can be extended to characterize interference in limited FOV scenarios as well.

cs.IT↗

Coverage Analysis in Millimeter Wave Cellular Networks with Reflections

The coverage probability of a user in a mmwave system depends on the availability of line-of-sight paths or reflected paths from any base station. Many prior works modelled blockages using random shape theory and analyzed the SIR distribution with and without interference. While, it is intuitive that the reflected paths do not significantly contribute to the coverage (because of longer path lengths), there are no works which provide a model and study the coverage with reflections. In this paper, we model and analyze the impact of reflectors using stochastic geometry. We observe that the reflectors have very little impact on the coverage probability.

cs.IT↗