SearcharxivSearch

arXiv subjects

Radu Arsinte

Publications and source records attributed to Radu Arsinte.

13 recordsLinked to original sources

An Experimental Evaluation Of Analog TV Cable Services Distributed In GPON Architecture

This paper explores the benefits of GPON (Gigabit Passive Optical Networks) in analog TV services. Analog TV service is still present in the standard triple play distribution architectures, as an effect of unique advantages: simple distribution in an apartment via standard RF splitters, unlimited number of viewing sites, real time behavior by lack of encoding/decoding processes. Of course, the quality is still limited by analogic standards, but the price/performance ratio is unbeatable. The most important parameters characterizing the analog TV performance are described, the network architecture is emphasized. To have a reference, the test architecture is a sub-network of a commercial telecom company. In this case only the quality of TV reception is performed. Using open-source software, and the integrated TV tuner board makes possible to test the levels and S/N ratio for all the analog TV channels of the spectrum. The system opens the possibility to do the same for digital channels in DVB-C standard, with minimal changes.

cs.NI

On The Automated Planning And Design Of SMATV Systems

The paper presents some theoretical and practical considerations regarding the TV information distribution in local (small and medium) networks, using different technologies and architectures. The SMATV concept is chosen to be presented extensively. The most important design formulae are presented with a software package supporting the network planner to design and optimize the network. A case study is realized, using standard components in SMATV, for a 5 floor building. The study proved that it is possible to design and optimize the entire network, without realizing first a costly experimental setup. It is also possible to run different architectures, optimizing also the costs of the final solution of network.

cs.NI

Evaluating QoS Parameters for IPTV Distribution in Heterogeneous Networks

The present work presents an architecture developed to evaluate the QoS parameters for the IPTV heterogeneous network. At its very basic level lie two software technologies: Video LAN and Windows Media Services with two operating systems: Windows and Linux. Three types of streams are analyzed, which will be transmitted to a Linux VLC client through means of the aggregation and access servers. The first stream is generated in real time by a capture camera, processed by the encapsulated VC-1 encoder and sent to the Media Server, while the second one is of VoD(Video on Demand) type and the third one will be handled by DVBViewer through the MPEG TS form. The first stream is transcoded in H.264-AAC such that the Linux stations will recognize its format. Through the simultaneous transmission of the three streams, we are analyzing their performance from a QoS parameters point of view by means of an application implemented in C programming language. The stream transporting the DVB-S television content was proven to ensure the best performance regarding loss of packets, delays and jitter.

cs.MM

Study of a Robust Algorithm Applied in the Optimal Position Tuning for the Camera Lens in Automated Visual Inspection Systems

This paper present the mathematical fundaments and experimental study of an algorithm used to find the optimal position for the camera lens to obtain a maximum of details. This information can be further applied to a appropriate system to automatically correct this position. The algorithm is based on the evaluation of a so called resolution function who calculates the maximum of gradient in a certain zone of the image. The paper also presents alternative forms of the function, results of measurements and set up a set of practical rules for the right application of the algorithm.

cs.CV

A Study on the Optimal Implementation of Statistical Multiplexing in DVB Distribution Systems

The paper presents an overview of the main methods used to improve the efficiency of DVB systems, based on multiplexing, through a study on the impact of the multiplexing methods used in DVB, having as a final goal a better usage of the data capacity and the possibility to insert new services into the original DVB Transport Stream. This study revealed that not all DVB providers are using statistical multiplexing. Based on this study, we were able to propose a method to improve the original DVB stream, originated from DVB-S or DVB-T providers. This method is proposing the detection of null packets, removal and reinserting a new service, with a VBR content. The method developed in this research can be implemented even in optimized statistical multiplexing systems, due to a residual use of null packets for data rate adjustment. There is no need to have access in the original stream multiplexer, since the method allows the implementation on the fly, near to the end user. The proposed method is proposed to be applied in DVB-S to DVB-C translation, using the computing power of a PC or in a FPGA implementation.

cs.MM

Aspects of Entertainment Distribution in an Intelligent Home Environment

The paper presents an implementation and tests of a simple home entertainment distribution architecture (server + multiple clients) implemented using two conventional cabling architectures: CATV coaxial cable and conventional Ethernet. This architecture is created taking into account the "Home gateway" concept present in most attempts to solve the problem of the "Intelligent home". A short presentation of the experimental is given with an investigation of the main performances obtained using this architecture. The experiments revealed that this simple solution makes possible to have entertainment and data services with performances close to traditional data services in a cost-effective architecture

cs.NI

Study of a Hybrid - Analog TV and Ethernet- Home Data Link using a Coaxial Cable

The paper presents an implementation and compatibility tests of a simple home network implemented in a nonconventional manner using a CATV coaxial cable. Reusing the cable, normally designated to supply RF modulated TV signals from cable TV networks, makes possible to add data services as well. A short presentation of the technology is given with an investigation of the main performances obtained using this technique. The measurements revealed that this simple solution makes possible to have both TV and data services with performances close to traditional home data services: cable modems or ADSL, with minimal investments. This technology keeps also open the possibility for future improvements of the network: DVB-C or Data via Cable Modems.

cs.MM

Considerations and Results in Multimedia and DVB Application Development on Philips Nexperia Platform

This paper presents some experiments regarding applications development on high performance media processors included in Philips Nexperia Family. The PNX1302 dedicated DVB-T kit used has some limitations. Our work has succeeded to overcome these limitations and to make possible a general-purpose use of this kit. For exemplification two typical applications, important both for multimedia and DVB, are analyzed: MPEG2 video stream decoding and MP3 audio decoding. These original implementations are compared (in speed, memory requirements and costs) with Philips Nexperia Library.

cs.CV

Streaming Multimedia Information Using the Features of the DVB-S Card

This paper presents a study of audio-video streaming using the additional possibilities of a DVB-S card. The board used for experiments (Technisat SkyStar 2) is one of the most frequently used cards for this purpose. Using the main blocks of the board's software support it is possible the implement a really useful and full functional system for audio-video streaming. The streaming is possible to be implemented either for decoded MPEG stream or for transport stream. In this last case it is possible to view not only a program, but any program from the same multiplex. This allows us to implement

cs.MM

Acquisition Accuracy Evaluation in Visual Inspection Systems - a Practical Approach

This paper draws a proposal of a set of parameters and methods for accuracy evaluation of visual inspection systems. The case of a monochrome board is treated, but practically all conclusions and methods may be extended for colour acquisition. Basically, the proposed parameters are grouped in five sets as follows:Internal noise;Video ADC cuantisation parameters;Analogue processing section parameters;Dominant frequencies;Synchronisation (lock-in) accuracy. On basis of this set of parameters was developed a software environment, in conjunction with a test signal generator that allows the "test" images. The paper also presents conclusions of evaluation for two types of video acquisition boards

cs.CV

DSP Based System for Real time Voice Synthesis Applications Development

This paper describes an experimental system designed for development of real time voice synthesis applications. The system is composed from a DSP coprocessor card, equipped with an TMS320C25 or TMS320C50 chip, voice acquisition module (ADDA2),host computer (IBM-PC compatible), software specific tools.

cs.SD

Some Aspects of Testing Process for Transport Streams in Digital Video Broadcasting

This paper presents some aspects related to the DVB (Digital Video Broadcasting) investigation. The basic aspects of DVB are presented, with an emphasis on DVB-T version of standard. The main purpose of this research is to analyze the way that the transmission of the transport streams is realized in case of the Terrestrial Digital Video Broadcasting (DVB-T). To accomplish this, first, Digital Video Broadcasting standard is presented, and then the main aspects of DVB testing and analysis of the transport streams are investigated. The paper presents also the results obtained using two programs designed for DVB analysis: Mosalina and TSA.

cs.CV

Implementing a Test Strategy for an Advanced Video Acquisition and Processing Architecture

This paper presents some aspects related to test process of an advanced video system used in remote IP surveillance. The system is based on a Pentium compatible architecture using the industrial standard PC104+. First the overall architecture of the system is presented, involving both hardware or software aspects. The acquisition board which is developed in a special, nonstandard architecture, is also briefly presented. The main purpose of this research was to set a coherent set of procedures in order to test all the aspects of the video acquisition board. To accomplish this, it was necessary to set-up a procedure in two steps: stand alone video board test (functional test) and an in-system test procedure verifying the compatibility with both OS: Linux and Windows. The paper presents also the results obtained using this procedure.

cs.CV