arXiv subjects

Rafael Molina-Masegosa

Publications and source records attributed to Rafael Molina-Masegosa.

8 recordsLinked to original sources

arXiv2026

FORESEE: A Cooperative Lane Change Model for Connected and Automated Driving

This paper presents FORESEE, a novel cooperative lane change model for connected and automated driving. FORESEE leverages Vehicle-to-Everything (V2X) data to anticipate traffic conditions and effectively organize lane changes. Specifically, it uses V2X data to organize vehicles into lanes based on their desired speeds, which helps to homogenize traffic flow and reduce disturbances caused by speed differences among vehicles within the same lane. The study demonstrates that implementing cooperative lane changes with FORESEE enhances average vehicle speed and energy efficiency compared to non-cooperative lane changes, which typically rely on short-term and local information about the ego vehicle and its immediate neighbors. This is achieved through fewer but more effective lane changes. Additionally, vehicles can maintain speeds closer to their desired speeds, resulting in fewer fluctuations in speed and acceleration and enhanced driving comfort. Moreover, cooperative lane changes can better manage road traffic disturbances, such as obstacles, by anticipating traffic conditions and organizing lane changes ahead. FORESEE serves as a valuable framework for the future design and testing of V2X-based maneuver coordinations as their effectiveness depends on how vehicles change lanes and their ability to plan and organize maneuvers in consideration of the upcoming traffic conditions.

cs.NI↗

arXiv2026

Importance of Intent-Sharing for V2X-based Maneuver Coordination

This paper examines the critical role of intent-sharing in enabling effective maneuver coordination for connected and automated vehicles (CAVs). Successful maneuver coordinations require vehicles to accurately know other vehicles' driving intentions. Intent-sharing can be achieved by the remote vehicles directly communicating their plans with the ego vehicle, as opposed to the ego vehicle predicting the trajectory on the remote vehicles' behalf. In this paper, we investigate the potential of intent-sharing on maneuver coordination effectiveness by quantifying the percentage of successful coordinations. We analyze the potential of intent-sharing by comparing its effectiveness for coordinated lane changes in a highway scenario with the effectiveness of a trajectory prediction method based on current kinematic data. Our analysis demonstrates in two scenarios substantial improvements in maneuver coordination when CAVs have direct access to the nearby vehicles' driving intentions through intent sharing. These findings highlight the importance of including intent-sharing in the maneuver coordination protocol.

cs.NI↗

arXiv2026

When Cooperation Should End: Maneuver Coordination Cancellation for Connected Automated Driving

Maneuver coordination is essential for cooperative connected automated driving, enabling vehicles to negotiate maneuvers and interactions through V2X communication. While prior work has largely focused on how to initiate and execute coordinations, considerably less attention has been given to how ongoing coordinations should be terminated when they become unsuitable. This paper introduces the first complete design and implementation of maneuver coordination cancellation, including a state machine, message set, and decision-making logic. Our evaluation shows that cancellation significantly reduces the time vehicles spend in coordinations that cannot succeed, allowing them to become available for new maneuvers sooner. This increases the number of triggered coordinations and improves the number of successful maneuver coordinations. Overall, the study demonstrates that maneuver coordination cancellation improves cooperative driving, and establishes a foundation for further refinements that can enhance the efficiency and robustness of connected automated driving.

cs.NI↗

arXiv2026

Multi-Target Maneuver Coordinations: Unlocking Coordination Opportunities in Connected Automated Driving

Maneuver coordination is a key enabler of connected and automated driving, allowing vehicles to negotiate and execute maneuvers that would otherwise be difficult, inefficient or unsafe. Existing approaches and use cases typically assume coordination with a single predefined target vehicle, which limits the number of coordination opportunities. This paper introduces a maneuver coordination approach based on multi-target selection, which allows a vehicle to identify and select among multiple potential coordination vehicles for a given maneuver. Multi-target maneuver coordination does not require modifications to the maneuver execution logic or to the underlying coordination protocol. Instead, it extends the decision-making process preceding coordination, enabling vehicles to exploit a broader set of feasible cooperative interactions. Results show that multi-target maneuver coordination significantly increases triggered and successfully executed coordinations while maintaining a low computational cost, as the proposed approach achieves these gains without requiring the analysis of a large number of potential target vehicles. These improvements preserve coordination success rates while enabling earlier maneuver initiation.

cs.NI↗

arXiv2021

Analytical Models of the Performance of IEEE 802.11p Vehicle to Vehicle Communications

The critical nature of vehicular communications requires their extensive testing and evaluation. Analytical models can represent an attractive and cost-effective approach for such evaluation if they can adequately model all underlying effects that impact the performance of vehicular communications. Several analytical models have been proposed to date to model vehicular communications based on the IEEE 802.11p (or DSRC) standard. However, existing models normally model in detail the MAC (Medium Access Control), and generally simplify the propagation and interference effects. This reduces their value as an alternative to evaluate the performance of vehicular communications. This paper addresses this gap, and presents new analytical models that accurately model the performance of vehicle-to-vehicle communications based on the IEEE 802.11p standard. The models jointly account for a detailed modeling of the propagation and interference effects, as well as the impact of the hidden terminal problem. The model quantifies the PDR (Packet Delivery Ratio) as a function of the distance between transmitter and receiver. The paper also presents new analytical models to quantify the probability of the four different types of packet errors in IEEE 802.11p. In addition, the paper presents the first analytical model capable to accurately estimate the Channel Busy Ratio (CBR) metric even under high channel load levels. All the analytical models are validated by means of simulation for a wide range of parameters, including traffic densities, packet transmission frequencies, transmission power levels, data rates and packet sizes. An implementation of the models is provided openly to facilitate their use by the community.

cs.NI↗

arXiv2020

Empirical Models for the Realistic Generation of Cooperative Awareness Messages in Vehicular Networks

Most V2X (Vehicle-to-Everything) applications rely on broadcasting awareness messages known as CAM (Cooperative Awareness Messages) in ETSI or BSM (Basic Safety Message) in SAE standards. A large number of studies have been devoted to guarantee their reliable transmission. However, to date, the studies are generally based on simplified data traffic models that generate awareness messages at periodic intervals or with a constant message size. These models do not accurately represent the real generation of CAM messages that follow specific mobility-based rules. Using simplified and unrealistic traffic models can significantly impact the results and validity of the studies, and hence accurate models for the generation of awareness messages are necessary. This paper proposes the first set of models that can realistically generate CAM messages. The models have been created from real traces collected by two car manufacturers in urban, sub-urban and highway test drives. The models are based on mth order Markov sources, and model the size of CAMs and the time interval between CAMs. The models are openly provided to the community and can be easily integrated into any simulator.

cs.NI↗

arXiv2019

Geo-Based Scheduling for C-V2X Networks

Cellular Vehicle-to-Everything (C-V2X) networks can operate without cellular infrastructure support. Vehicles can autonomously select their radio resources using the sensing-based Semi-Persistent Scheduling (SPS) algorithm specified by the Third Generation Partnership Project (3GPP). The sensing nature of the SPS scheme makes C-V2X communications prone to the well-known hidden-terminal problem. To address this problem, this paper proposes a novel geo-based scheduling scheme that allows vehicles to autonomously select their radio resources based on the location and ordering of neighboring vehicles on the road. The proposed scheme results in an implicit resource selection coordination between vehicles (even with those outside the sensing range) that reduces packet collisions. This paper evaluates analytically and through simulations the proposed scheduling scheme. The obtained results demonstrate that it reduces packet collisions and significantly increases the C-V2X performance compared to when using the sensing-based SPS scheme.

cs.NI↗

arXiv2018

Analytical Models of the Performance of C-V2X Mode 4 Vehicular Communications

The C-V2X or LTE-V standard has been designed to support V2X (Vehicle to Everything) communications. The standard is an evolution of LTE, and it has been published by the 3GPP in Release 14. This new standard introduces the C-V2X or LTE-V Mode 4 that is specifically designed for V2V communications using the PC5 sidelink interface without any cellular infrastructure support. In Mode 4, vehicles autonomously select and manage their radio resources. Mode 4 is highly relevant since V2V safety applications cannot depend on the availability of infrastructure-based cellular coverage. This paper presents the first analytical models of the communication performance of C-V2X or LTE-V Mode 4. In particular, the paper presents analytical models for the average PDR (Packet Delivery Ratio) as a function of the distance between transmitter and receiver, and for the four different types of transmission errors that can be encountered in C-V2X Mode 4. The models are validated for a wide range of transmission parameters and traffic densities. To this aim, this study compares the results obtained with the analytical models to those obtained with a C-V2X Mode 4 simulator implemented over Veins.

cs.NI↗