arXiv subjects

Rafael Taboryski

Publications and source records attributed to Rafael Taboryski.

5 recordsLinked to original sources

arXiv2019

Nanoimprinting and Tapering of Chalcogenide Photonic Crystal Fibers for Cascaded Supercontinuum Generation

Improved long-wavelength transmission and supercontinuum (SC) generation is demonstrated by anti-reflective (AR) nanoimprinting and tapering of chalcogenide photonic crystal fibers (PCF). Using a SC source input spanning from 1-4.2 μm, the total transmission of a 15 μm core diameter PCF was improved from ~53 % to ~74 % by nanoimprinting of AR structures on both input- and output facets of the fiber. Through a combined effect of reduced reflection and red-shifting of the spectrum to 5 μm, the relative transmission of light >3.5 μm in the same fiber was increased by 60.2 %. Further extension of the spectrum to 8 μm was achieved using tapered fibers. The spectral broadening dynamics and output power was investigated using different taper parameters and pulse repetition rates.

physics.optics↗

arXiv2018

Laser Ablation and Injection Moulding as Techniques for Producing Micro Channels Compatible with Small Angle X-Ray Scattering

Microfluidic mixing is an important means for in-situ sample preparation and handling while Small Angle X-Ray Scattering (SAXS) is a proven tool for characterising (macro-)molecular structures. In combination those two techniques enable investigations of fast reactions with high time resolution (<1 ms). The goal of combining a micro mixer with SAXS, however, puts constraints on the materials and production methods used in the device fabrication. The measurement channel of the mixer needs good x-ray transparency and a low scattering background. While both depend on the material used, the requirement for low scattering especially limits the techniques suitable for producing the mixer, as the fabrication process can induce molecular orientations and stresses that can adversely influence the scattering signal. Not only is it important to find a production method that results in a device with low background scattering, but it also has to be versatile enough to produce appropriate mixer designs. Here we discuss two methods - laser ablation of polycarbonate and injection moulding of Topas - which were found suitable for our needs, provided care is taken in aligning the mixing/reaction channel, where the actual measurements will be carried out. We find injection moulding to be the better of the two methods.

physics.app-ph↗

arXiv1999

Observation of supercurrent enhancement in SNS junctions by non-equilibrium injection into supercurrent carrying bound Andreev states

We report for the first time enhancement of the supercurrent by means of injection in a mesoscopic three terminal planar SNSNS device made of Al on GaAs. When a current is injected from one of the superconducting Al electrodes at an injection bias $V=Δ(T)/e$, the DC Josephson current between the other two superconducting electrodes has a maximum, giving evidence for an enhancement due to a non-equilibrium injection into bound Andreev states of the underlying semiconductor. The effect persists to temperatures where the equilibrium supercurrent has vanished.

cond-mat.supr-con↗

arXiv1999

Multiple Andreev reflections in diffusive SNS structures

We report new measurements on sup-gap energy structure originating from multiple Andreev reflections in mesoscopic SNS junctions. The junctions were fabricated in a planar geometry with high transparency superconducting contacts of Al deposited on highly diffusive and surface d-doped n++-GaAs. For samples with a normal GaAs region of active length 0.3um the Josephson effect with a maximal supercurrent Ic=3mA at T=237mK was observed. The sub-gap structure was observed as a series of local minima in the differential resistance at dc bias voltages V=2D/ne with n=1,2,4 i.e. only the even sub-gap positions. While at V=2D/e (n=1) only one dip is observed, the n=2, and the n=4 sub-gap structures each consists of two separate dips in the differential resistance. The mutual spacing of these two dips is independent of temperature, and the mutual spacing of the n=4 dips is half of the spacing of the n=2 dips. The voltage bias positions of the sub-gap differential resistance minima coincide with the maxima in the oscillation amplitude when a magnetic field is applied in an interferometer configuration, where one of the superconducting electrodes has been replaced by a flux sensitive open loop.

cond-mat.supr-con↗

arXiv1994

Magnetoresistance of a 2-dimensional electron gas in a random magnetic field

We report magnetoresistance measurements on a two-dimensional electron gas (2DEG) made from a high mobility GaAs/AlGaAs heterostructure, where the externally applied magnetic field was expelled from regions of the semiconductor by means of superconducting lead grains randomly distributed on the surface of the sample. A theoretical explanation in excellent agreement with the experiment is given within the framework of the semiclassical Boltzmann equation.

cond-mat↗