arXiv subjects

Rahman Saadat Yeganeh

Publications and source records attributed to Rahman Saadat Yeganeh.

5 recordsLinked to original sources

arXiv2026

GNN-Based Polarforming for Multi-User MISO Short-Packet URLLC under Imperfect CSI

This paper investigates polarization-aware transmission for multi-user multiple-input single-output (MU-MISO) short-packet ultra-reliable low-latency communications (URLLC) under imperfect channel state information (CSI). We consider a system in which the base station (BS) and users are equipped with polarization-reconfigurable antennas that enable adaptive polarization states through controllable polarization coefficients. A multi-objective optimization problem is formulated to jointly maximize the finite-blocklength (FBL) achievable sum rate and minimize the maximum decoding error probability (DEP), subject to transmit-power, latency, reliability, and discrete polarization-control constraints. The resulting multi-objective problem is scalarized using a normalized weighted-sum utility. To enable low-complexity online decision-making, a heterogeneous graph neural network (GNN) is developed to learn the joint mapping from estimated polarized CSI to digital beamforming and transmit/receive polarforming vectors (PFVs) while accounting for the system constraints. Numerical results demonstrate that the proposed GNN-based polarforming (PF) framework substantially improves the FBL sum rate while reducing the maximum DEP compared with conventional fixed-polarization schemes, particularly under channel depolarization and imperfect CSI. This highlights the potential of adaptive polarization control for reliable low-latency transmission.

cs.IT↗

arXiv2026

QoS Improvement in Multi User Cellular-Symbiotic Radio Network Assisted by Active-STAR-RIS

In this article, we employ active simultaneously transmitting and reflecting reconfigurable intelligent surfaces (ASRIS) to enhance the quality of 6G cellular network services. The network integrates commensal symbiotic radio (CSR) subsystems to facilitate communication between passive Internet of Things (IoT) users and active users, referred to as symbiotic backscatter devices (SBDs) and symbiotic user equipments (SUEs), respectively. Since the SBDs are passive, transmitting information to the SUEs poses significant challenges. To overcome this challenge, we harness the capabilities of massive multiple input multiple output (MIMO) antennas within the base station (BS) to relay the information transmitted by SBDs with greater power. This scheme uses the non-orthogonal multiple access (NOMA) technique for multiple access among all users, and potential interferences are eliminated using successive interference cancellation (SIC). The primary objective is to maximize the throughput between SBDs and SUEs. To achieve this, we formulate an optimization problem involving variables such as active beamforming coefficients at the BS and ASRIS, phase adjustments of ASRIS, and scheduling parameters between CSR and cellular networks. To solve this optimization problem, we used three deep reinforcement learning (DRL) methods: proximal policy optimization (PPO), twin delayed deep deterministic policy gradient (TD3), and asynchronous advantage actor critic (A3C). These methods were simulated, and the results demonstrate that A3C, TD3, and PPO have the best convergence speeds and achieve the highest increases in network throughput, respectively. Finally, the proposed scheme was evaluated using passive simultaneously transmitting and reflecting RIS (STAR-RIS), which demonstrated poorer performance compared to ASRIS.

eess.SP↗

arXiv2026

Enhancing Energy and Spectral Efficiency in IoT-Cellular Networks via Active SIM-Equipped LEO Satellites

This paper investigates a low Earth orbit (LEO) satellite communication system enhanced by an active stacked intelligent metasurface (ASIM), mounted on the backplate of the satellite solar panels to efficiently utilize limited onboard space and reduce the main satellite power amplifier requirements. The system serves multiple ground users via rate-splitting multiple access (RSMA) and IoT devices through a symbiotic radio network. Multi-layer sequential processing in the ASIM improves effective channel gains and suppresses inter-user interference, outperforming active RIS and beyond-diagonal RIS designs. Three optimization approaches are evaluated: block coordinate descent with successive convex approximation (BCD-SCA), model-assisted multi-agent constraint soft actor-critic (MA-CSAC), and multi-constraint proximal policy optimization (MCPPO). Simulation results show that BCD-SCA converges fast and stably in convex scenarios without learning, MCPPO achieves rapid initial convergence with moderate stability, and MA-CSAC attains the highest long-term spectral and energy efficiency in large-scale networks. Energy-spectral efficiency trade-offs are analyzed for different ASIM elements, satellite antennas, and transmit power. Overall, the study demonstrates that integrating multi-layer ASIM with suitable optimization algorithms offers a scalable, energy-efficient, and high-performance solution for next-generation LEO satellite communications.

eess.SY↗

arXiv2025

Energy Efficient RSMA-Based LEO Satellite Communications Assisted by UAV-Mounted BD-Active RIS: A DRL Approach

This paper proposes an advanced non-terrestrial communication architecture that integrates Rate-Splitting Multiple Access (RSMA) with a Beyond-Diagonal Active Reconfigurable Intelligent Surface (BD-ARIS) mounted on a UAV under the coverage of a Low Earth Orbit (LEO) satellite. The BD-ARIS adopts a group-connected structure to enhance signal amplification and adaptability, while RSMA enables efficient multi-user access by dividing messages into common and private components. The system jointly optimizes satellite beamforming, UAV positioning, power allocation, and rate-splitting ratios to maximize the overall energy efficiency (EE). To solve the resulting non-convex and high-dimensional problem, we employ three state-of-the-art deep reinforcement learning (DRL) algorithms: Trust Region Policy Optimization (TRPO), Twin Delayed Deep Deterministic Policy Gradient (TD3), and Asynchronous Advantage Actor-Critic (A3C). Moreover, realistic models for the power consumption of both the UAV and the BD-ARIS are considered. Simulation results reveal that TRPO consistently achieves the best performance in terms of EE and sum rate, especially under high transmit powers and challenging deployment scenarios. TD3 converges faster and performs competitively in moderate settings, while A3C suffers from instability due to its high variance. Additionally, the robustness of each algorithm under channel state information (CSI) uncertainty is evaluated, confirming TRPO resilience to imperfect observations. Overall, the proposed RSMA-BD-ARIS framework significantly outperforms conventional RIS-assisted designs and provides a scalable, energy-efficient solution for 6G and massive IoT applications in non-terrestrial networks.

eess.SP↗

arXiv2024

Multi-BD Symbiotic Radio-Aided 6G IoT Network: Energy Consumption Optimization with QoS Constraint Approach

The commensal symbiotic radio (CSR) system is proposed as a novel solution for connecting systems through green communication networks. This system enables us to establish secure, ubiquitous, and unlimited connectivity, which is a goal of 6G. The base station uses MIMO antennas to transmit its signal. Passive IoT devices, called symbiotic backscatter devices (SBDs), receive the signal and use it to charge their power supply. When the SBDs have data to transmit, they modulate the information onto the received ambient RF signal and send it to the symbiotic user equipment, which is a typical active device. The main purpose is to enhance energy efficiency in this network by minimizing energy consumption (EC) while ensuring the minimum required throughput for SBDs. To achieve this, we propose a new scheduling scheme called Timing-SR that optimally allocates resources to SBDs. The main optimization problem involves non-convex objective functions and constraints. To solve this, we use mathematical techniques and introduce a new approach called sequential quadratic and conic quadratic representation to relax and discipline the problem, leading to reducing its complexity and convergence time. The simulation results demonstrate that the proposed approach outperforms other outlined schemes in reducing EC.

eess.SP↗