arXiv subjects

Rahul Shetty

Publications and source records attributed to Rahul Shetty.

34 records · Page 2Linked to original sources

arXiv2012

The linewidth-size relationship in the dense ISM of the Central Molecular Zone

The linewidth (sigma) - size (R) relationship has been extensively measured and analysed, in both the local ISM and in nearby normal galaxies. Generally, a power-law describes the relationship well with an index ranging from 0.2-0.6, now referred to as one of "Larson's Relationships." The nature of turbulence and star formation is considered to be intimately related to these relationships, so evaluating the sigma-R correlations in various environments is important for developing a comprehensive understanding of the ISM. We measure the sigma-R relationship in the Central Molecular Zone (CMZ) of the Galactic Centre using spectral line observations of the high density tracers N2H+, HCN, H13CN, and HCO+. We use dendrograms, which map the hierarchical nature of the position-position-velocity (PPV) data, to compute sigma and R of contiguous structures. The dispersions range from ~2-30 km/s in structures spanning sizes 2-40 pc, respectively. By performing Bayesian inference, we show that a power-law with exponent 0.3-1.1 can reasonably describe the sigma-R trend. We demonstrate that the derived sigma-R relationship is independent of the locations in the PPV dataset where sigma and R are measured. The uniformity in the sigma-R relationship suggests turbulence in the CMZ is driven on the large scales beyond >30 pc. We compare the CMZ sigma-R relationship to that measured in the Galactic molecular cloud Perseus. The exponents between the two systems are similar, suggestive of a connection between the turbulent properties within a cloud to its ambient medium. Yet, the velocity dispersion in the CMZ is systematically higher, resulting in a coefficient that is nearly five times larger. The systematic enhancement of turbulent velocities may be due to the combined effects of increased star formation activity, larger densities, and higher pressures relative to the local ISM.

astro-ph.GA↗

arXiv2012

Maximally Star-Forming Galactic Disks II. Vertically-Resolved Hydrodynamic Simulations of Starburst Regulation

We explore the self-regulation of star formation using a large suite of high resolution hydrodynamic simulations, focusing on molecule-dominated regions (galactic centers and [U]LIRGS) where feedback from star formation drives highly supersonic turbulence. In equilibrium the total midplane pressure, dominated by turbulence, must balance the vertical weight of the ISM. Under self-regulation, the momentum flux injected by feedback evolves until it matches the vertical weight. We test this flux balance in simulations spanning a range of parameters, including surface density $Σ$, momentum injected per stellar mass formed ($p_*/m_*$), and angular velocity. The simulations are 2D radial-vertical slices, including both self-gravity and an external potential that confines gas to the disk midplane. After the simulations reach a steady state in all relevant quantities, including the star formation rate $Σ_{SFR}$, there is remarkably good agreement between the vertical weight, the turbulent pressure, and the momentum injection rate from supernovae. Gas velocity dispersions and disk thicknesses increase with $p_*/m_*$. The efficiency of star formation per free-fall time at the mid-plane density is insensitive to the local conditions and to the star formation prescription in very dense gas. We measure efficiencies $\sim$0.004-0.01, consistent with low and approximately constant efficiencies inferred from observations. For $Σ\in$(100--1000) \msunpc, we find $Σ_{SFR}\in$(0.1--4) \sfrunits, generally following a $Σ_{SFR}\propto Σ^2$ relationship. The measured relationships agree very well with vertical equilibrium and with turbulent energy replenishment by feedback within a vertical crossing time. These results, along with the observed $Σ_{SFR}-Σ$ relation in high density environments, provide strong evidence for the self-regulation of star formation.

astro-ph.CO↗

arXiv2012

Dust SEDs in the era of Herschel and Planck: a Hierarchical Bayesian fitting technique

We present a hierarchical Bayesian method for fitting infrared spectral energy distributions (SEDs) of dust emission to observed fluxes. Under the standard assumption of optically thin single temperature (T) sources the dust SED as represented by a power--law modified black body is subject to a strong degeneracy between T and the spectral index beta. The traditional non-hierarchical approaches, typically based on chi-square minimization, are severely limited by this degeneracy, as it produces an artificial anti-correlation between T and beta even with modest levels of observational noise. The hierarchical Bayesian method rigorously and self-consistently treats measurement uncertainties, including calibration and noise, resulting in more precise SED fits. As a result, the Bayesian fits do not produce any spurious anti-correlations between the SED parameters due to measurement uncertainty. We demonstrate that the Bayesian method is substantially more accurate than the chi-square fit in recovering the SED parameters, as well as the correlations between them. As an illustration, we apply our method to Herschel and sub millimeter ground-based observations of the star-forming Bok globule CB244. This source is a small, nearby molecular cloud containing a single low-mass protostar and a starless core. We find that T and beta are weakly positively correlated -- in contradiction with the chi-square fits, which indicate a T-beta anti-correlation from the same data-set. Additionally, in comparison to the chi-square fits the Bayesian SED parameter estimates exhibit a reduced range in values.

astro-ph.IM↗

arXiv2012

Line Profiles of Cores within Clusters: I. The Anatomy of a Filament

Observations are revealing the ubiquity of filamentary structures in molecular clouds. As cores are often embedded in filaments, it is important to understand how line profiles from such systems differ from those of isolated cores. We perform radiative transfer calculations on a hydrodynamic simulation of a molecular cloud in order to model line emission from collapsing cores embedded in filaments. We model two optically thick lines, CS(2-1) and HCN(1-0), and one optically thin line, N2H+(1-0), from three embedded cores. In the hydrodynamic simulation, gas self-gravity, turbulence, and bulk flows create filamentary regions within which cores form. Though the filaments have large dispersions, the N2H+(1-0) lines indicate subsonic velocities within the cores. We find that the observed optically thick line profiles of CS(2-1) and HCN(1-0) vary drastically with viewing angle. In over 50% of viewing angles, there is no sign of a blue asymmetry, an idealised signature of infall motions in an isolated spherical collapsing core. Profiles which primarily trace the cores, with little contribution from the surrounding filament, are characterised by a systematically higher HCN(1-0) peak intensity. The N2H+(1-0) lines do not follow this trend. We demonstrate that red asymmetric profiles are also feasible in the optically thick lines, due to emission from the filament or one-sided accretion flows onto the core. We conclude that embedded cores may frequently undergo collapse without showing a blue asymmetric profile, and that observational surveys including filamentary regions may underestimate the number of collapsing cores if based solely on profile shapes of optically thick lines.

astro-ph.GA↗

arXiv2011

Modeling CO Emission: II. The Physical Characteristics that Determine the X factor in Galactic Molecular Clouds

We investigate how the X factor, the ratio of H_2 column density (NH2) to velocity-integrated CO intensity (W), is determined by the physical properties of gas in model molecular clouds (MCs). We perform radiative transfer calculations on chemical-MHD models to compute X. Using integrated NH2 and W reproduces the limited range in X found in observations, resulting in a mean value X=2\times10^20 s/cm^2/K^1/km^1 from the Galactic MC model. However, in limited velocity intervals, X can take on a much larger range due to CO line saturation. Thus, X strongly depends on both the range in gas velocities and volume densities. The temperature (T) variations within individual MCs do not strongly affect X, as dense gas contributes most to setting X. For fixed velocity and density structure, gas with higher T has higher W, yielding X ~ T^-1/2 for T~20-100 K. We demonstrate that the linewidth-size scaling relation does not influence the X factor - only the range in velocities is important. Clouds with larger linewidths, regardless of the linewidth-size relation, have a higher W, corresponding to a lower value of X, scaling roughly as X ~ sigma^-1/2. The "mist" model, consisting of optically thick cloudlets with well-separated velocities, does not accurately reflect the conditions in a turbulent MC. We propose that the observed cloud-average values of X ~ XGal is simply a result of the limited range in NH2, temperatures, and velocities found in Galactic MCs - a ~constant value of X therefore does not require any linewidth-size relation, or that MCs are virialized objects. Since gas properties likely differ (slightly) between clouds, masses derived through a standard X should only be considered as a rough first estimate. For temperatures T~10-20 K, velocity dispersions ~1-6 km/s, and NH2~2-20\times10^21 cm^-2, we find cloud-averaged X ~ 2-4\times10^20 s/cm^2/K^1/km^1 for Solar-metallicity models.

astro-ph.GA↗

arXiv2011

Maximally Star-Forming Galactic Disks I. Starburst Regulation Via Feedback-Driven Turbulence

Star formation rates in the centers of disk galaxies often vastly exceed those at larger radii. We investigate the idea that these central starbursts are self-regulated, with the momentum flux injected to the ISM by star formation balancing the gravitational force confining the gas. For most starbursts, supernovae are the largest contributor to the momentum flux, and turbulence provides the main pressure support for the predominantly-molecular ISM. If the momentum feedback per stellar mass formed is p_*/m_* ~ 3000 km/s, the predicted star formation rate is Sigma_SFR=2 pi G Sigma^2 m_*/p_* ~0.1(Sigma/100Msun/pc^2)^2 Msun/kpc^2/yr in regions where gas dominates the vertical gravity. We compare this prediction with numerical simulations of vertically-resolved disks that model star formation including feedback, finding good agreement for gas surface densities Sigma ~ 10^2-10^3 Msun/pc^2. We also compare to a compilation of star formation rates and gas contents from local and high-redshift galaxies (both mergers and normal galaxies), finding good agreement provided that X_CO decreases weakly as Sigma and Sigma_SFR increase. Star formation rates in dense, turbulent gas are also expected to depend on the gravitational free-fall time; if the efficiency per free-fall time is epsilon_ff ~ 0.01, the turbulent velocity dispersion driven by feedback is expected to be v_z = 0.4 epsilon_ff p_*/m_* ~ 10 km/s, relatively independent of Sigma or Sigma_SFR. Turbulence-regulated starbursts (controlled by kinetic momentum feedback) are part of the larger scheme of self-regulation; primarily-atomic low-Sigma outer disks may have star formation regulated by UV heating feedback, whereas regions at extremely high Sigma may be regulated by feedback of radiation that is reprocessed into trapped IR.

astro-ph.CO↗

arXiv2010

Modeling CO Emission: I. CO as a Column Density Tracer and the X-Factor in Molecular Clouds

Theoretical and observational investigations have indicated that the abundance of carbon monoxide (CO) is very sensitive to intrinsic properties of the gaseous medium, such as density, metallicity, and the background UV field. In order to accurately interpret CO observations, it is thus important to understand how well CO traces the gas, which in molecular clouds (MCs) is predominantly molecular hydrogen (H2). Recent hydrodynamic simulations by Glover & Mac Low have explicitly followed the formation and destruction of molecules in model MCs under varying conditions, confirming that CO formation strongly depends on the cloud properties. Conversely, the H2 formation is primarily determined by the age of the MC. We apply radiative transfer calculations to these MC models in order to investigate the properties of CO line emission. We focus on integrated CO (J=1-0) intensities emerging from individual clouds, including its relationship to the total, H2, and CO column densities, as well as the "X factor," the ratio of H2 column density to CO intensity. Models with high CO abundances have a threshold CO intensity ~65 K km/s at sufficiently large extinctions. Clouds with low CO abundances show no such intensity thresholds. The distribution of H2 column densities are well described as log-normal functions, though the distributions of CO intensities and column densities are usually not log-normal. In general, the PDFs of the integrated intensity do not follow the distribution functions of CO column densities. In the model with Milky Way-like conditions, the X factor is in agreement with the near constant value determined from observations. In clouds with lower CO abundances the X factor can vary appreciably - sometimes by > 4 orders of magnitude. In models with high densities, the CO line is fully saturated, so that the X factor is directly proportional to the molecular column density.

astro-ph.GA↗

arXiv2010

The Mass-Size Relation from Clouds to Cores. II. Solar Neighborhood Clouds

We measure the mass and size of cloud fragments in several molecular clouds continuously over a wide range of spatial scales (0.05 < r / pc < 3). Based on the recently developed "dendrogram-technique", this characterizes dense cores as well as the enveloping clouds. "Larson's 3rd Law" of constant column density, m(r) = C*r^2, is not well suited to describe the derived mass-size data. Solar neighborhood clouds not forming massive stars (< 10 M_sun; Pipe Nebula, Taurus, Perseus, and Ophiuchus) obey m(r) < 870 M_sun (r / pc)^1.33 . In contrast to this, clouds forming massive stars (Orion A, G10.15$-$0.34, G11.11$-$0.12) do exceed the aforementioned relation. Thus, this limiting mass-size relation may approximate a threshold for the formation of massive stars. Across all clouds, cluster-forming cloud fragments are found to be---at given radius---more massive than fragments devoid of clusters. The cluster-bearing fragments are found to roughly obey a mass-size law m = C*r^1.27 (where the exponent is highly uncertain in any given cloud, but is certainly smaller than 1.5).

astro-ph.GA↗

arXiv2010

The Effect of Projection on Derived Mass-Size and Linewidth-Size Relationships

Power law mass-size and linewidth-size correlations, two of "Larson's laws," are often studied to assess the dynamical state of clumps within molecular clouds. Using the result of a hydrodynamic simulation of a molecular cloud, we investigate how geometric projection may affect the derived Larson relationships. We find that large scale structures in the column density map have similar masses and sizes to those in the 3D simulation (PPP). Smaller scale clumps in the column density map are measured to be more massive than the PPP clumps, due to the projection of all emitting gas along lines of sight. Further, due to projection effects, structures in a synthetic spectral observation (PPV) may not necessarily correlate with physical structures in the simulation. In considering the turbulent velocities only, the linewidth-size relationship in the PPV cube is appreciably different from that measured from the simulation. Including thermal pressure in the simulated linewidths imposes a minimum linewidth, which results in a better agreement in the slopes of the linewidth-size relationships, though there are still discrepancies in the offsets, as well as considerable scatter. Employing commonly used assumptions in a virial analysis, we find similarities in the computed virial parameters of the structures in the PPV and PPP cubes. However, due to the discrepancies in the linewidth- and mass- size relationships in the PPP and PPV cubes, we caution that applying a virial analysis to observed clouds may be misleading due to geometric projection effects. We speculate that consideration of physical processes beyond kinetic and gravitational pressure would be required for accurately assessing whether complex clouds, such as those with highly filamentary structure, are bound.

astro-ph.GA↗

arXiv2009

The Dust Emissivity Spectral Index in the Starless Core TMC-1C

In this paper we present a dust emission map of the starless core TMC-1C taken at 2100 microns. Along with maps at 160, 450, 850 and 1200 microns, we study the dust emissivity spectral index from the (sub)millimeter spectral energy distribution, and find that it is close to the typically assumed value of beta = 2. We also map the dust temperature and column density in TMC-1C, and find that at the position of the dust peak (A_V ~ 50), the line-of-sight-averaged temperature is ~7 K. Employing simple Monte Carlo modeling, we show that the data are consistent with a constant value for the emissivity spectral index over the whole map of TMC-1C.

astro-ph.GA↗

arXiv2009

The Effect of Line of Sight Temperature Variation and Noise on Dust Continuum Observations

We investigate the effect of line of sight temperature variations and noise on two commonly used methods to determine dust properties from dust continuum observations of dense cores. One method employs a direct fit to a modified blackbody SED; the other involves a comparison of flux ratios to an analytical prediction. Fitting fluxes near the SED peak produces inaccurate temperature and dust spectral index estimates due to the line of sight temperature (and density) variations. Longer wavelength fluxes in the Rayleigh-Jeans part of the spectrum (>~ 600 micron for typical cores) may more accurately recover the spectral index, but both methods are very sensitive to noise. The temperature estimate approaches the density weighted temperature, or "column temperature," of the source as short wavelength fluxes are excluded. An inverse temperature - spectral index correlation naturally results from SED fitting, due to the inaccurate isothermal assumption, as well as noise uncertainties. We show that above some "threshold" temperature, the temperatures estimated through the flux ratio method can be highly inaccurate. In general, observations with widely separated wavelengths, and including shorter wavelengths, result in higher threshold temperatures; such observations thus allow for more accurate temperature estimates of sources with temperatures less than the threshold temperature. When only three fluxes are available, a constrained fit, where the spectral index is fixed, produces less scatter in the temperature estimate when compared to the estimate from the flux ratio method.

astro-ph.GA↗

arXiv2009

The Effect of Noise on the Dust Temperature - Spectral Index Correlation

We investigate how uncertainties in flux measurements affect the results from modified blackbody SED fits. We show that an inverse correlation between the dust temperature T and spectral index (beta) naturally arises from least squares fits due to the uncertainties, even for sources with a single T and beta. Fitting SEDs to noisy fluxes solely in the Rayleigh-Jeans regime produces unreliable T and beta estimates. Thus, for long wavelength observations (lambda >~ 200 micron), or for warm sources (T >~ 60 K), it becomes difficult to distinguish sources with different temperatures. We assess the role of noise in recent observational results that indicate an inverse and continuously varying T - beta relation. Though an inverse and continuous T - beta correlation may be a physical property of dust in the ISM, we find that the observed inverse correlation may be primarily due to noise.

astro-ph.GA↗

arXiv2008

Radial Dependence of the Pattern Speed of M51

The grand-design spiral galaxy M51 has long been a crucial target for theories of spiral structure. Studies of this iconic spiral can address the question of whether strong spiral structure is transient (e.g. interaction-driven) or long-lasting. As a clue to the origin of the structure in M51, we investigate evidence for radial variation in the spiral pattern speed using the radial Tremaine-Weinberg (TWR) method. We implement the method on CO observations tracing the ISM-dominant molecular component. Results from the method's numerical implementation--combined with regularization, which smooths intrinsically noisy solutions--indicate two distinct patterns speeds inside 4 kpc at our derived major axis PA=170 deg., both ending at corotation and both significantly higher than the conventionally adopted global value. Inspection of the rotation curve suggests that the pattern speed interior to 2 kpc lacks an ILR, consistent with the leading structure seen in HST near-IR observations. We also find tentative evidence for a lower pattern speed between 4 and 5.3 kpc measured by extending the regularized zone. As with the original TW method, uncertainty in major axis position angle (PA) is the largest source of error in the calculation; in this study, where δPA=+/-5 deg. a ~20% error is introduced to the parameters of the speeds at PA=170 deg. Accessory to this standard uncertainty, solutions with PA=175 deg. (also admitted by the data) exhibit only one pattern speed inside 4 kpc, and we consider this circumstance under the semblance of a radially varying PA.

astro-ph↗

arXiv2008

Cloud and Star Formation in Disk Galaxy Models with Feedback

We include feedback in global hydrodynamic simulations in order to study the star formation properties, and gas structure and dynamics, in models of galactic disks. We extend previous models by implementing feedback in gravitationally bound clouds: momentum is injected at a rate proportional to the star formation rate. This mechanical energy disperses cloud gas back into the surrounding ISM, truncating star formation in a given cloud, and raising the overall level of ambient turbulence. Propagating star formation can however occur as expanding shells collide, enhancing the density and triggering new cloud and star formation. By controlling the momentum injection per massive star and the specific star formation rate in dense gas, we find that the negative effects of high turbulence outweigh the positive ones, and in net feedback reduces the fraction of dense gas and thus the overall star formation rate. The properties of the large clouds that form are not, however, very sensitive to feedback, with cutoff masses of a few million solar masses, similar to observations. We find a relationship between the star formation rate surface density and the gas surface density with a power law index ~2 for our models with the largest dynamic range, consistent with theoretical expectations for our model of disk flaring. We point out that the value of the "Kennicutt-Schmidt" index depends on the thickness of the disk. With our simple feedback prescription (a single combined star formation event per cloud), we find that global spiral patterns are not sustained; less correlated feedback and smaller scale turbulence appear to be necessary for spiral patterns to persist.

astro-ph↗

arXiv2007

Kinematics of Spiral Arm Streaming in M51

We use CO and H alpha velocity fields to study the gas kinematics in the spiral arms and interarms of M51 (NGC 5194), and fit the 2D velocity field to estimate the radial and tangential velocity components as a function of spiral phase (arm distance). We find large radial and tangential streaming velocities, which are qualitatively consistent with the predictions of density wave theory and support the existence of shocks. The streaming motions are complex, varying significantly across the galaxy as well as along and between arms. Aberrations in the velocity field indicate that the disk is not coplanar, perhaps as far in as 20\arcsec\ (800 pc) from the center. Velocity profile fits from CO and H alpha are typically similar, suggesting that most of the H alpha emission originates from regions of recent star formation. We also explore vortensity and mass conservation conditions. Vortensity conservation, which does not require a steady state, is empirically verified. The velocity and density profiles show large and varying mass fluxes, which are inconsistent with a steady flow for a single dominant global spiral mode. We thus conclude that the spiral arms cannot be in a quasi-steady state in any rotating frame, and/or that out of plane motions may be significant.

astro-ph↗

arXiv2006

Global Modeling of Spur Formation in Spiral Galaxies

We investigate the formation of substructure in spiral galaxies using global MHD simulations, including gas self-gravity. Our models extend previous local models by Kim and Ostriker (2002) by including the full effects of curvilinear coordinates, a realistic log-spiral perturbation, self-gravitational contribution from 5 radial wavelengths of the spiral shock, and variation of density and epicyclic frequency with radius. We show that with realistic Toomre Q values, self-gravity and galactic differential rotation produce filamentary gaseous structures with kpc-scale separations, regardless of the strength -- or even presence -- of a stellar spiral potential. However, the growth of sheared features distinctly associated with the spiral arms, described as spurs or feathers in optical and IR observations of many spiral galaxies, requires a sufficiently strong spiral potential in self gravitating models. Unlike independently-growing ''background'' filaments, the orientation of arm spurs depends on galactic location. Inside corotation, spurs emanate outward, on the convex side of the arm; outside corotation, spurs grow inward, on the concave side of the arm. Based on spacing, orientation, and the relation to arm clumps, it is possible to distinguish ''true spurs'' that originate as instabilities in the spiral arms from independently growing ''background'' filaments. Our models also suggest that magnetic fields are important in preserving grand design spiral structure when gas in the arms fragments via self-gravity into GMCs.

astro-ph↗