Searcharxiv⌕ Search

arXiv subjects

Raj Jain

Publications and source records attributed to Raj Jain.

At least 55 records · Page 3Linked to original sources

A Scheduler for Unsolicited Grant Service (UGS) in IEEE 802.16e Mobile WiMAX Networks

Most of the IEEE 802.16e Mobile WiMAX scheduling proposals for real-time traffic using Unsolicited Grant Service (UGS) focus on the throughput and the guaranteed latency. The delay variation or delay jitter and the effect of burst overhead have not yet been investigated. This paper introduces a new technique called Swapping Min-Max (SWIM) for UGS scheduling that not only meets the delay constraint with optimal throughput, but also minimizes the delay jitter and burst overhead.

cs.NI↗

Energy Sensing and Monitoring Framework with an Integrated Communication Backbone in the Energy Efficient Intelligent Buildings

Building environments are significant sources of global energy consumption. To create energy efficient buildings, the first step is to sense and monitor all the energy-consuming appliances in the buildings and record all the energy consumption information. After that, appropriate energy saving policies can be decided and the instructions can be sent to the control devices to apply the energy saving adjustments. To do that, in-building two-way communication networks are needed to connect all the sensors to collect information as well as to send control instructions. However, most of the current devices are provided by separate manufacturers and with separate network infrastructures and so there is not much integration and interaction among different subsystems. In this paper, we envision a new energy sensing and monitoring framework with integrated communication backbone in the intelligent building environments. Specifically, through comprehensive comparisons and investigations, we study different candidate communicating media and protocols like wireline, wireless, and power-line communications technologies that potentially can be used in the intelligent buildings to realize the goals of coordination, integration, and energy efficiency. Also, we propose an extension "smart box" for integration of the devices before the maturity of the standardization process. Cloud computing and smart phone technologies are also introduced to realize the goals of improving energy efficiency and promote global sustainability.

cs.NI↗

Optimized Flooding Protocol for Ad hoc Networks

Flooding provides important control and route establishment functionality for a number of unicast and multicast protocols in Mobile Ad Hoc Networks. Considering its wide use as a building block for other network layer protocols, the flooding methodology should deliver a packet from one node to all other network nodes using as few messages as possible. In this paper, we propose the Optimized Flooding Protocol (OFP), based on a variation of The Covering Problem that is encountered in geometry, to minimize the unnecessary transmissions drastically and still be able to cover the whole region. OFP does not need hello messages and hence OFP saves a significant amount of wireless bandwidth and incurs lesser overhead. We present simulation results to show the efficiency of OFP in both ideal cases and randomly distributed networks. Moreover, OFP is scalable with respect to density; in fact OFP requires lesser number of transmissions at higher densities. OFP is also resilient to transmission errors.

cs.NI↗

TCP Selective Acknowledgments and UBR Drop Policies to Improve ATM-UBR Performance over Terrestrial and Satellite Networks

We study the performance of Selective Acknowledgments with TCP over the ATM-UBR service category. We examine various UBR drop policies, TCP mechanisms and network configurations to recommend optimal parameters for TCP over UBR. We discuss various TCP congestion control mechanisms compare their performance for LAN and WAN networks. We describe the effect of satellite delays on TCP performance over UBR and present simulation results for LAN, WAN and satellite networks. SACK TCP improves the performance of TCP over UBR, especially for large delay networks. Intelligent drop policies at the switches are an important factor for good performance in local area networks.

cs.NI↗

A Survey of Protocols and Open Issues in ATM Multipoint Communication

Asynchronous transfer mode (ATM) networks must define multicast capabilities in order to efficiently support numerous applications, such as video conferencing and distributed applications, in addition to LAN emulation (LANE) and Internet protocol (IP) multicasting. Several problems and issues arise in ATM multicasting, such as signaling, routing, connection admission control, and traffic management problems. IP integrated services over ATM poses further challenges to ATM multicasting. Scalability and simplicity are the two main concerns for ATM multicasting. This paper provides a survey of the current work on multicasting problems in general, and ATM multicasting in particular. A number of proposed schemes is examined, such as the schemes MARS, MCS, SEAM, SMART, RSVP, and various multipoint traffic management and transport-layer schemes. The paper also indicates a number of key open issues that remain unresolved.

cs.NI↗

Performance Testing Effort at the ATM Forum: An Overview

The testing group at ATM Forum is working on developing a specification for performance testing of ATM switches and networks. The emphasis is on the user perceived frame-level performance. This paper explains what is different about this new effort and gives its status.

cs.NI↗

Design Considerations for the Virtual Source/Virtual Destination (VS/VD) Feature in the ABR Service of ATM Networks

The Available Bit Rate (ABR) service in ATM networks has been specified to allow fair and efficient support of data applications over ATM utilizing capacity left over after servicing higher priority classes. One of the architectural features in the ABR specification [tm4] is the Virtual Source/Virtual Destination (VS/VD) option. This option allows a switch to divide an end-to-end ABR connection into separately controlled ABR segments by acting like a destination on one segment, and like a source on the other. The coupling in the VS/VD switch between the two ABR control segments is implementation specific. In this paper, we model a VS/VD ATM switch and study the issues in designing coupling between ABR segments. We identify a number of implementation options for the coupling. A good choice significantly improves the stability and transient performance of the system and reduces the buffer requirements at the switches.

cs.NI↗

Use-it or Lose-it Policies for the Available Bit Rate (ABR) Service in ATM Networks

The Available Bit Rate (ABR) service has been developed to support 21st century data applications over Asynchronous Transfer Mode (ATM). The ABR service uses a closed-loop rate-based traffic management framework where the network divides left-over bandwidth among contending sources. The ATM Forum traffic management group also incorporated open-loop control capabilities to make the ABR service robust to temporary network failures and source inactivity. An important problem addressed was whether rate allocations of sources should be taken away if sources do not use them. The proposed solutions, popularly known as the Use-It-or-Lose-It (UILI) policies, have had significant impact on the ABR service capabilities. In this paper we discuss the design, development, and the final shape of these policies and their impact on the ABR service. We compare the various alternatives through a performance evaluation.

cs.NI↗

UBR+: Improving Performance of TCP over ATM-UBR service

ATM-UBR switches respond to congestion by dropping cells when their buffers become full. TCP connections running over UBR experience low throughput and high unfairness. For 100% TCP throughput each switch needs buffers equal to the sum of the window sizes of all the TCP connections. Intelligent drop policies can improve the performance of TCP over UBR with limited buffers. The UBR+ service proposes enhancements to UBR for intelligent drop. Early Packet Discard improves throughput but does not attempt to improve fairness. Selective packet drop based on per-connection buffer occupancy improves fairness. The Fair Buffer Allocation scheme further improves both throughput and fairness.

cs.NI↗

Performance of TCP over ABR on ATM backbone and with various VBR traffic patterns

We extend our earlier studies of buffer requirements of TCP over ABR in two directions. First, we study the performance of TCP over ABR in an ATM backbone. On the backbone, the TCP queues are at the edge router and not inside the ATM network. The router requires buffer equal to the sum of the receiver window sizes of the participating TCP connections. Second, we introduce various patterns of VBR background traffic. The VBR background introduces variance in the ABR capacity and the TCP traffic introduces variance in the ABR demand. Some simple switch schemes are unable to keep up with the combined effect of highly varying demands and highly varying ABR capacity. We present our experiences with refining the ERICA+ switch scheme to handle these conditions.

cs.NI↗

Performance of TCP/IP Using ATM ABR and UBR Services over Satellite Networks

We study the buffering requirements for zero cell loss for TCP/IP over satellite links using the available bit rate (ABR) and unspecified bit rate (UBR) services of asynchronous transfer mode (ATM) networks. For the ABR service, we explore the effect of feedback delay (a factor which depends upon the position of the bottleneck), the switch scheme used, and background variable bit rate (VBR) traffic. It is shown that the buffer requirement for TCP over ABR is independent of the number of TCP sources, but depends on the aforementioned factors. For the UBR service, we show that the buffer requirement is the sum of the TCP receiver window sizes. We substantiate our arguments with simulation results.

cs.NI↗

On Source Rules for ABR Service on ATM Networks with Satellite Links

During the design of ABR traffic management at the ATM Forum, we performed several analyses to ensure that the ABR service will operate efficiently over satellite links. In the cases where the performance was unacceptable, we suggested modifications to the traffic management specifications. This paper describes one such issue related to the count of missing resource management cells (Crm) parameter of the ABR source behavior. The analysis presented here led to the changes which are now part of the ATM traffic management (TM 4.0) specification. In particular, the size of the transient buffer exposure (TBE) parameter was set to 24 bits, and no size was enforced for the Crm parameter. This simple change improved the throughput over OC-3 satellite links from 45 Mbps to 140 Mbps.

cs.NI↗

A Survey of Congestion Control Techniques and Data Link Protocols in Satellite Networks

Satellite communication systems are the means of realizing a global broadband integrated services digital network. Due to the statistical nature of the integrated services traffic, the resulting rate fluctuations and burstiness render congestion control a complicated, yet indispensable function. The long propagation delay of the earth-satellite link further imposes severe demands and constraints on the congestion control schemes, as well as the media access control techniques and retransmission protocols that can be employed in a satellite network. The problems in designing satellite network protocols, as well as some of the solutions proposed to tackle these problems, will be the primary focus of this survey.

cs.NI↗

Buffer Requirements For TCP/IP Over ABR

We study the buffering requirements for zero cell loss for TCP over ABR. We show that the maximum buffers required at the switch is proportional to the maximum round trip time (RTT) of all VCs through the link. The number of round-trips depends upon the the switch algorithm used. With our ERICA [erica-final] switch algorithm, we find that the buffering required is independent of the number of TCP sources. We substantiate our arguments with simulation results.

cs.NI↗

The OSU Scheme for Congestion Avoidance in ATM networks Using Explicit Rate Indication

An explicit rate indication scheme for congestion avoidance in computer and telecommunication networks is proposed. The sources monitor their load and provide the information periodically to the switches. The switches, in turn, compute the load level and ask the sources to adjust their rates up or down. The scheme achieves high link utilization, fair allocation of rates among contending sources and provides quick convergence. A backward congestion notification option is also provided. The conditions under which this option is useful are indicated.

cs.NI↗

Source Behavior for ATM ABR Traffic Management: An Explanation

The Available Bit Rate (ABR) service has been developed to support data applications over Asynchronous Transfer Mode (ATM) networks. The network continuously monitors its traffic and provides feedback to the source end systems. This paper explains the rules that the sources have to follow to achieve a fair and efficient allocation of network resources.

cs.NI↗

Performance and Buffering Requirements of Internet Protocols over ATM ABR and UBR Services

The Asynchronous Transfer Mode (ATM) networks are quickly being adopted as backbones over various parts of the Internet. This paper analyzes the performance of TCP/IP protocols over ATM network's Available Bit Rate (ABR) and Unspecified Bit Rate (UBR) services. It is shown that ABR pushes congestion to the edges of the ATM network while UBR leaves it inside the ATM portion.

cs.NI↗