arXiv subjects

Rajat Srivastava

Publications and source records attributed to Rajat Srivastava.

7 recordsLinked to original sources

arXiv2026

Diffusion-Based Super-Resolution of Adriatic Sea Oceanographic Fields

High-resolution oceanographic fields are critical for resolving mesoscale and sub-mesoscale coastal dynamics, yet their generation remains constrained by both computational cost and observational sparsity. We present OcDiffSR, a conditional denoising diffusion probabilistic model (DDPM) for oceanographic super-resolution that reconstructs high-resolution sea-surface fields from coarse-resolution reanalysis inputs. The model is trained on ten years (2011-2020) of paired low-resolution (GLORYS12V1, 1/12) and high-resolution (Mediterranean Sea Physics Reanalysis, Med MFC, 1/24) data, and evaluated on an independent test year (2009) over the Adriatic Sea. OcDiffSR employs a conditional U-Net augmented with multi-scale low-resolution encoders, cross-attention bottleneck layers, and sinusoidal seasonal embeddings via Feature-wise Linear Modulation (FiLM), enabling joint super-resolution of sea-surface temperature (SST), salinity (SSS), and horizontal velocity components with visually coherent circulation patterns. Benchmarked against bilinear interpolation and the state-of-the-art residual diffusion model CorrDiff, OcDiffSR achieves substantially lower reconstruction errors for scalar fields (RMSESST=0.477 C, RMSESSS=0.346 psu), near-unity Pearson correlation (PCC >= 0.999), and high structural similarity (SSIM >= 0.964). For dynamical vector fields, OcDiffSR outperforms both baselines in absolute error and spatial coherence, though moderate correlation (PCC = 0.64) reflects the intrinsic stochasticity of oceanic velocity fields. Daily and monthly evaluations confirm temporal robustness across all seasons. These results establish OcDiffSR as a reliable framework for high-fidelity oceanographic downscaling and reanalysis enhancement, producing fields that are visually consistent with known ocean dynamics.

physics.ao-ph↗

arXiv2026

Transient Depth Thermography for Probing Heat Transport

Directly probing heat propagation inside materials remains challenging because conventional measurements are predominantly sensitive to surface temperature. Depth thermography has enabled non-contact reconstruction of subsurface temperature profiles from spectrally resolved thermal radiation under steady-state conditions. Here, we extend this approach into the time domain, establishing transient depth thermography to resolve the evolution of internal temperature during heat transport. By exploiting wavelength-dependent optical penetration depth, time-resolved thermal-radiation spectra provide access to temperature as a function of both depth and time. Tracking this spatiotemporal temperature field enables direct probing of heat propagation and quantitative determination of out-of-plane thermal conductivity and interfacial thermal resistance. We demonstrate the approach in fused silica, obtaining thermal conductivity within 2% of established values, and measure the temperature-dependent thermal conductivity of MgF2 over a broad temperature range where existing data are sparse and inconsistent. Numerical simulations further demonstrate its extension to multilayer thin films for probing interfacial thermal resistance. By extending depth-resolved thermal spectroscopy from steady-state to transient heat transport, this work establishes a new optical route for non-contact characterization of thermal dynamics in bulk and layered materials.

physics.optics↗

arXiv2026

Building Trust in Autonomous Commerce: A Verifiable Global Event Timeline and AI-Ready Fraud Intelligence Layer

Agentic commerce protocols such as AP2 and ACP define mechanisms for secure agent-initiated transactions but do not provide interoperable, tamper-evident auditability or verifiable temporal ordering of events across heterogeneous domains. This paper addresses these gaps by proposing a verifiable global event timeline for agentic commerce, constructed from four core components: canonical event schemas that enforce deterministic serialization, deterministic batch formation ensuring reproducible ordering without reliance on synchronized clocks, Merkle-based append-only commitments providing logarithmic-cost inclusion proofs, and blockchain anchoring establishing a tamper-evident temporal backbone. Building on this infrastructure, we introduce a cryptographically signed fraud marker that binds risk labels to anchored evidence through an unforgeable provenance chain, and a dataset lineage model enabling reproducible, tamper-evident AI training pipelines. Empirical results from a prototype implementation demonstrate: Merkle tree construction processes 50,000 events in 47 milliseconds; end-to-end verification completes in under 0.013 milliseconds regardless of batch size; inclusion proof sizes grow logarithmically from 320 bytes at 1,000 events to 512 bytes at 50,000 events; and Merkle-based verification outperforms linear scan by 14.4x at 50,000 events.

cs.CR↗

arXiv2023

Mesoscopic modeling and experimental validation of thermal and mechanical properties of polypropylene nanocomposites reinforced by graphene-based fillers

The development of nanocomposites relies on structure-property relations, which necessitate multiscale modeling approaches. This study presents a modelling framework that exploits mesoscopic models to predict the thermal and mechanical properties of nanocomposites starting from their molecular structure. In detail, mesoscopic models of polypropylene (PP) and graphene based nanofillers (Graphene (Gr), Graphene Oxide (GO), and reduced Graphene Oxide (rGO)) are considered. The newly developed mesoscopic model for the PP/Gr nanocomposite provides mechanistic information on the thermal and mechanical properties at the filler-matrix interface, which can be then exploited to enhance the prediction accuracy of traditional continuum simulations by calibrating the thermal and mechanical properties of the filler-matrix interface. Once validated through a dedicated experimental campaign, this multiscale model demonstrates that with the modest addition of nanofillers (up to 2 wt.%), the Young's modulus and thermal conductivity show up to 35% and 25% enhancement, respectively, while the Poisson's ratio slightly decreases. Among the different combinations tested, PP/Gr nanocomposite shows the best mechanical properties, whereas PP/rGO demonstrates the best thermal conductivity. This validated mesoscopic model can contribute to the development of smart materials with enhanced mechanical and thermal properties based on polypropylene, especially for mechanical, energy storage, and sensing applications.

cond-mat.mtrl-sci↗

arXiv2023

The impact of physicochemical features of carbon electrodes on the capacitive performance of supercapacitors: A machine learning approach

Hybrid electric vehicles and portable electronic systems use supercapacitors for energy storage owing to their fast charging discharging rates, long life cycle, and low maintenance. Specific capacitance is regarded as one of the most important performance-related characteristics of a supercapacitor's electrode. In the current study, Machine Learning (ML) algorithms were used to determine the impact of various physicochemical properties of carbon-based materials on the capacitive performance of electric double-layer capacitors. Published experimental datasets from 147 references (4899 data entries) were extracted and then used to train and test the ML models, to determine the relative importance of electrode material features on specific capacitance. These features include current density, pore volume, pore size, presence of defects, potential window, specific surface area, oxygen, and nitrogen content of the carbon-based electrode material. Additionally, categorical variables as the testing method, electrolyte, and carbon structure of the electrodes are considered as well. Among five applied regression models, an extreme gradient boosting model was found to best correlate those features with the capacitive performance, highlighting that the specific surface area, the presence of nitrogen doping, and the potential window are the most significant descriptors for the specific capacitance. These findings are summarized in a modular and open-source application for estimating the capacitance of supercapacitors given, as only inputs, the features of their carbon-based electrodes, the electrolyte and testing method. In perspective, this work introduces a new wide dataset of carbon electrodes for supercapacitors extracted from the experimental literature, also giving an instance of how electrochemical technology can benefit from ML models.

cond-mat.mtrl-sci↗

arXiv2023

Dynamics of space debris removal: A review

Space debris, also known as "space junk," presents a significant challenge for all space exploration activities, including those involving human-onboard spacecraft such as SpaceX's Crew Dragon and the International Space Station. The amount of debris in space is rapidly increasing and poses a significant environmental concern. Various studies and research have been conducted on space debris capture mechanisms, including contact and contact-less capturing methods, in Earth's orbits. While advancements in technology, such as telecommunications, weather forecasting, high-speed internet, and GPS, have benefited society, their improper and unplanned usage has led to the creation of debris. The growing amount of debris poses a threat of collision with the International Space Station, shuttle, and high-value satellites, and is present in different parts of Earth's orbit, varying in size, shape, speed, and mass. As a result, capturing and removing space debris is a challenging task. This review article provides an overview of space debris statistics and specifications, and focuses on ongoing mitigation strategies, preventive measures, and statutory guidelines for removing and preventing debris creation, emphasizing the serious issue of space debris damage to space agencies and relevant companies.

astro-ph.IM↗

arXiv2021

A comparative study of various Deep Learning techniques for spatio-temporal Super-Resolution reconstruction of Forced Isotropic Turbulent flows

Super-resolution is an innovative technique that upscales the resolution of an image or a video and thus enables us to reconstruct high-fidelity images from low-resolution data. This study performs super-resolution analysis on turbulent flow fields spatially and temporally using various state-of-the-art machine learning techniques like ESPCN, ESRGAN and TecoGAN to reconstruct high-resolution flow fields from low-resolution flow field data, especially keeping in mind the need for low resource consumption and rapid results production/verification. The dataset used for this study is extracted from the 'isotropic 1024 coarse' dataset which is a part of Johns Hopkins Turbulence Databases (JHTDB). We have utilized pre-trained models and fine tuned them to our needs, so as to minimize the computational resources and the time required for the implementation of the super-resolution models. The advantages presented by this method far exceed the expectations and the outcomes of regular single structure models. The results obtained through these models are then compared using MSE, PSNR, SAM, VIF and SCC metrics in order to evaluate the upscaled results, find the balance between computational power and output quality, and then identify the most accurate and efficient model for spatial and temporal super-resolution of turbulent flow fields.

physics.flu-dyn↗