arXiv subjects

Rajeev Gangula

Publications and source records attributed to Rajeev Gangula.

17 recordsLinked to original sources

arXiv2026

Enabling Programmable Inference and ISAC at the 6GR Edge with dApps

The convergence of communication, sensing, and Artificial Intelligence (AI) in the Radio Access Network (RAN) offers compelling economic advantages through shared spectrum and infrastructure. How can inference and sensing be integrated in the RAN infrastructure at a system level? Current abstractions in O-RAN and 3GPP lack the interfaces and capabilities to support (i) a dynamic life cycle for inference and Integrated Sensing and Communication (ISAC) algorithms, whose requirements and sensing targets may change over time and across sites; (ii) pipelines for AI-driven ISAC, which need complex data flows, training, and testing; (iii) dynamic device and stack configuration to balance trade-offs between connectivity, sensing, and inference services. This paper analyzes the role of a programmable, software-driven, open RAN in enabling the intelligent edge for 5G and 6G systems. We identify real-time user-plane data exposure, open interfaces for plug-and-play inference and ISAC models, closed-loop control, and AI pipelines as elements that evolutions of the O-RAN architecture can uniquely provide. Specifically, we describe how dApps - a real-time, user-plane extension of O-RAN - and a hierarchy of controllers enable real-time AI inference and ISAC. Experimental results on an open-source RAN testbed demonstrate the value of exposing I/Q samples and real-time RAN telemetry to dApps for sensing applications.

cs.NI↗

arXiv2025

Bistatic Sensing in 5G NR

In this work, we propose and evaluate the performance of a 5th generation (5G) New Radio (NR) bistatic Integrated Sensing and Communication (ISaC) system. Unlike the full-duplex monostatic ISaC systems, the bistatic approach enables sensing in the current cellular networks without significantly modifying the transceiver design. The sensing utilizes data channels, such as the Physical Uplink Shared Channel (PUSCH), which carries information on the air interface. We provide the maximum likelihood estimator for the delay and Doppler parameters and derive a lower bound on the Mean Square Error (MSE) for a single target scenario. Link-level simulations show that it is possible to achieve significant throughput while accurately estimating the sensing parameters with PUSCH. Moreover, the results reveal an interesting tradeoff between the number of reference symbols, sensing performance, and throughput in the proposed 5G NR bistatic ISaC system.

eess.SP↗

arXiv2025

dApps: Enabling Real-Time AI-Based Open RAN Control

Open Radio Access Networks (RANs) leverage disaggregated and programmable RAN functions and open interfaces to enable closed-loop, data-driven radio resource management. This is performed through custom intelligent applications on the RAN Intelligent Controllers (RICs), optimizing RAN policy scheduling, network slicing, user session management, and medium access control, among others. In this context, we have proposed dApps as a key extension of the O-RAN architecture into the real-time and user-plane domains. Deployed directly on RAN nodes, dApps access data otherwise unavailable to RICs due to privacy or timing constraints, enabling the execution of control actions within shorter time intervals. In this paper, we propose for the first time a reference architecture for dApps, defining their life cycle from deployment by the Service Management and Orchestration (SMO) to real-time control loop interactions with the RAN nodes where they are hosted. We introduce a new dApp interface, E3, along with an Application Protocol (AP) that supports structured message exchanges and extensible communication for various service models. By bridging E3 with the existing O-RAN E2 interface, we enable dApps, xApps, and rApps to coexist and coordinate. These applications can then collaborate on complex use cases and employ hierarchical control to resolve shared resource conflicts. Finally, we present and open-source a dApp framework based on OpenAirInterface (OAI). We benchmark its performance in two real-time control use cases, i.e., spectrum sharing and positioning in a 5th generation (5G) Next Generation Node Base (gNB) scenario. Our experimental results show that standardized real-time control loops via dApps are feasible, achieving average control latency below 450 microseconds and allowing optimal use of shared spectral resources.

cs.NI↗

arXiv2024

ORANSlice: An Open-Source 5G Network Slicing Platform for O-RAN

Network slicing allows Telecom Operators (TOs) to support service provisioning with diverse Service Level Agreements (SLAs). The combination of network slicing and Open Radio Access Network (RAN) enables TOs to provide more customized network services and higher commercial benefits. However, in the current Open RAN community, an open-source end-to-end slicing solution for 5G is still missing. To bridge this gap, we developed ORANSlice, an open-source network slicing-enabled Open RAN system integrated with popular open-source RAN frameworks. ORANSlice features programmable, 3GPP-compliant RAN slicing and scheduling functionalities. It supports RAN slicing control and optimization via xApps on the near-real-time RAN Intelligent Controller (RIC) thanks to an extension of the E2 interface between RIC and RAN, and service models for slicing. We deploy and test ORANSlice on different O-RAN testbeds and demonstrate its capabilities on different use cases, including slice prioritization and minimum radio resource guarantee.

cs.NI↗

arXiv2024

Round Trip Time Estimation Utilizing Cyclic Shift of Uplink Reference Signal

In the context of fifth-generation new radio (5G NR) technology, it is not possible to directly obtain an absolute uplink (UL) channel impulse response (CIR) at the base station (gNB) from a user equipment (UE). The UL CIR obtained through the sounding reference signal (SRS) is always time-shifted by the timing advance (TA) applied at the UE. The TA is crucial for maintaining UL synchronization, and transmitting SRS without applying the TA will result in interference. In this work, we propose a new method to obtain absolute UL CIR from a UE and then use it to estimate the round trip time (RTT) at the gNB. This method requires enhancing the current 5G protocol stack with a new Zadoff-Chu (ZC) based wideband uplink reference signal (URS). Capitalizing on the cyclic shift property of the URS sequence, we can obtain the RTT with a significant reduction in overhead and latency compared to existing schemes. The proposed method is experimentally validated using a real-world testbed based on OpenAirInterface (OAI).

cs.IT↗

arXiv2024

5G NR Positioning with OpenAirInterface: Tools and Methodologies

The fifth-generation new radio (5G NR) technology is expected to provide precise and reliable positioning capabilities along with high data rates. The Third Generation Partnership Project (3GPP) has started introducing positioning techniques from Release-16 based on time, angle, and signal strength using reference signals. However, validating these techniques with experimental prototypes is crucial before successful real-world deployment. This work provides useful tools and implementation details that are required in performing 5G positioning experiments with OpenAirInterface (OAI). As an example use case, we present an round trip time (RTT) estimation test-bed based on OAI and discusses the real-word experiment and measurement process.

cs.IT↗

arXiv2024

Listen-While-Talking: Toward dApp-based Real-Time Spectrum Sharing in O-RAN

This demo paper presents a dApp-based real-time spectrum sharing scenario where a 5th generation (5G) base station implementing the NR stack adapts its transmission and reception strategies based on the incumbent priority users in the Citizen Broadband Radio Service (CBRS) band. The dApp is responsible for obtaining relevant measurements from the Next Generation Node Base (gNB), running the spectrum sensing inference, and configuring the gNB with a control action upon detecting the primary incumbent user transmissions. This approach is built on dApps, which extend the O-RAN framework to the real-time and user plane domains. Thus, it avoids the need of dedicated Spectrum Access Systems (SASs) in the CBRS band. The demonstration setup is based on the open-source 5G OpenAirInterface (OAI) framework, where we have implemented a dApp interfaced with a gNB and communicating with a Commercial Off-the-Shelf (COTS) User Equipment (UE) in an over-the-air wireless environment. When an incumbent user has active transmission, the dApp will detect and inform the primary user presence to the gNB. The dApps will also enforce a control policy that adapts the scheduling and transmission policy of the Radio Access Network (RAN). This demo provides valuable insights into the potential of using dApp-based spectrum sensing with O-RAN architecture in next generation cellular networks.

cs.NI↗

arXiv2024

Novel Round Trip Time Estimation in 5G NR

The fifth generation new radio (5G NR) technology is expected to fulfill reliable and accurate positioning requirements of industry use cases, such as autonomous robots, connected vehicles, and future factories. Starting from Third Generation Partnership Project (3GPP) Release-16, several enhanced positioning solutions are featured in the 5G standards, including the multi-cell round trip time (multi-RTT) method. This work presents a novel framework to estimate the round-trip time (RTT) between a user equipment (UE) and a base station (gNB) in 5G NR. Unlike the existing scheme in the standards, RTT can be estimated without the need to send timing measurements from both the gNB and UE to a central node. The proposed method relies on obtaining multiple coherent uplink wide-band channel measurements at the gNB by circumventing the timing advance control loops and the clock drift. The performance is evaluated through experiments leveraging a real world 5G testbed based on OpenAirInterface (OAI). Under a moderate system bandwidth of 40MHz, the experimental results show meter level range accuracy even in low signal-to-noise ratio (SNR) conditions.

cs.IT↗

arXiv2024

Colosseum: The Open RAN Digital Twin

Recent years have witnessed the Open Radio Access Network (RAN) paradigm transforming the fundamental ways cellular systems are deployed, managed, and optimized. This shift is led by concepts such as openness, softwarization, programmability, interoperability, and intelligence of the network, all of which had never been applied to the cellular ecosystem before. The realization of the Open RAN vision into practical architectures, intelligent data-driven control loops, and efficient software implementations, however, is a multifaceted challenge, which requires (i) datasets to train Artificial Intelligence (AI) and Machine Learning (ML) models; (ii) facilities to test models without disrupting production networks; (iii) continuous and automated validation of the RAN software; and (iv) significant testing and integration efforts. This paper poses itself as a tutorial on how Colosseum - the world's largest wireless network emulator with hardware in the loop - can provide the research infrastructure and tools to fill the gap between the Open RAN vision, and the deployment and commercialization of open and programmable networks. We describe how Colosseum implements an Open RAN digital twin through a high-fidelity Radio Frequency (RF) channel emulator and end-to-end softwarized O-RAN and 5G-compliant protocol stacks, thus allowing users to reproduce and experiment upon topologies representative of real-world cellular deployments. Then, we detail the twinning infrastructure of Colosseum, as well as the automation pipelines for RF and protocol stack twinning. Finally, we showcase a broad range of Open RAN use cases implemented on Colosseum, including the real-time connection between the digital twin and real-world networks, and the development, prototyping, and testing of AI/ML solutions for Open RAN.

cs.NI↗

arXiv2023

Integrated Access and Backhaul in 5G with Aerial Distributed Unit using OpenAirInterface

In this work, we propose an UAV-aided Integrated Access and Backhaul (IAB) system design offering 5G connectivity to ground users. UAV is integrated with a distributed unit (DU) acting as an aerial DU, which can provide 5G wireless backhaul access to a terrestrial central unit (CU). The CU-DU interface fully complies with the 3GPP defined F1 application protocol (F1AP). Such aerial DU can be instantiated and configured dynamically, tailoring to the network demands. The complete radio and access network solution is based on open-source software from OpenAirInterface (OAI) and off-the-shelf commercial 5G mobile terminals. Experimental results illustrate throughput gains and coverage extension brought by the aerial DU.

cs.IT↗

arXiv2023

UAV Trajectory Optimization and Tracking for User Localization in Wireless Networks

In this paper, we investigate the problem of UAV-aided user localization in wireless networks. Unlike the existing works, we do not assume perfect knowledge of the UAV location, hence we not only need to localize the users but also to track the UAV location. To do so, we utilize the time-of-arrival along with received signal strength radio measurements collected from users using a UAV. A simultaneous localization and mapping (SLAM) framework building on the Expectation-Maximization-based least-squares method is proposed to classify measurements into line-of-sight or non-line-of-sight categories and learn the radio channel, and at the same, localize the users and track the UAV. This framework also allows us to exploit other types of measurements such as the rough estimate of the UAV location available from GPS, and the UAV velocity measured by an inertial measurement unit (IMU) on-board, to achieve better localization accuracy. Moreover, the trajectory of the UAV is optimized which brings considerable improvement to the localization performance. The simulations show the out-performance of the developed algorithm when compared to other approaches.

cs.IT↗

arXiv2023

Sensing aided Channel Estimation in Wideband Millimeter-Wave MIMO Systems

In this work, the uplink channel estimation problem is considered for a millimeter wave (mmWave) multi-input multi-output (MIMO) system. It is well known that pilot overhead and computation complexity in estimating the channel increases with the number of antennas and the bandwidth. To overcome this, the proposed approach allows the channel estimation at the base station to be aided by the sensing information. The sensing information contains an estimate of scatterers locations in an environment. A simultaneous weighting orthogonal matching pursuit (SWOMP) - sparse Bayesian learning (SBL) algorithm is proposed that efficiently incorporates this sensing information in the communication channel estimation procedure. The proposed framework can cope with scenarios where a) scatterers present in the sensing information are not associated with the communication channel and b) imperfections in the scatterers' location. Simulation results show that the proposed sensing aided channel estimation algorithm can obtain good wideband performance only at the cost of fractional pilot overhead. Finally, the Cramer-Rao Bound (CRB) for the angle estimation and multipath channel gains in the SBL is derived, providing valuable insights into the local identifiability of the proposed algorithms.

cs.IT↗

arXiv2022

UAV-aided Wireless Node Localization Using Hybrid Radio Channel Models

This paper considers the problem of ground user localization based on received signal strength (RSS) measurements obtained by an unmanned aerial vehicle (UAV). We treat UAV-user link channel model parameters and antenna radiation pattern of the UAV as unknowns that need to be estimated. A hybrid channel model is proposed that consists of a traditional path loss model combined with a neural network approximating the UAV antenna gain function. With this model and a set of offline RSS measurements, the unknown parameters are estimated. We then employ the particle swarm optimization (PSO) technique which utilizes the learned hybrid channel model along with a 3D map of the environment to accurately localize the ground users. The performance of the developed algorithm is evaluated through simulations and also real-world experiments.

cs.IT↗

arXiv2022

UAV-aided RF Mapping for Sensing and Connectivity in Wireless Networks

The use of unmanned aerial vehicles (UAV) as flying radio access network (RAN) nodes offers a promising complement to traditional fixed terrestrial deployments. More recently yet still in the context of wireless networks, drones have also been envisioned for use as radio frequency (RF) sensing and localization devices. In both cases, the advantage of using UAVs lies in their ability to navigate themselves freely in 3D and in a timely manner to locations of space where the obtained network throughput or sensing performance is optimal. In practice, the selection of a proper location or trajectory for the UAV very much depends on local terrain features, including the position of surrounding radio obstacles. Hence, the robot must be able to map the features of its radio environment as it performs its data communication or sensing services. The challenges related to this task, referred here as radio mapping, are discussed in this paper. Its promises related to efficient trajectory design for autonomous radio-aware UAVs are highlighted, along with algorithm solutions. The advantages induced by radio-mapping in terms of connectivity, sensing, and localization performance are illustrated.

cs.IT↗

arXiv2019

3D-Map Assisted UAV Trajectory Design Under Cellular Connectivity Constraints

The enabling of safe cellular controlled unmanned aerial vehicle (UAV) beyond visual line of sight is expected to open important future opportunities in the area of transportation, goods delivery, and system monitoring. A key challenge in this area lies in the design of trajectories which, while allowing the completion of the UAV mission, can guarantee reliable cellular connectivity all along the path. Previous approaches in this domain have considered simplistic propagation model assumptions (e.g. Line of Sight based) or more advanced models but with computationally demanding optimized solutions. In this paper, we propose a novel approach for trajectory design using a coverage map that can be obtained with a combination of 3D map of the environment and radio propagation models. Leveraging on the convexity of sub-regions within the coverage map, we propose a low-complexity graph based algorithm which is shown to achieve quasi-optimal performance at a fraction of the computational cost of known optimal methods.

cs.IT↗

arXiv2018

Learning to Communicate in UAV-aided Wireless Networks: Map-based Approaches

We consider a scenario where an UAV-mounted flying base station is providing data communication services to a number of radio nodes spread over the ground. We focus on the problem of resource-constrained UAV trajectory design with (i) optimal channel parameters learning and (ii) optimal data throughput as key objectives, respectively. While the problem of throughput optimized trajectories has been addressed in prior works, the formulation of an optimized trajectory to efficiently discover the propagation parameters has not yet been addressed. When it comes to the communication phase, the advantage of this work comes from the exploitation of a 3D city map. Unfortunately, the communication trajectory design based on the raw map data leads to an intractable optimization problem. To solve this issue, we introduce a map compression method that allows us to tackle the problem with standard optimization tools. The trajectory optimization is then combined with a node scheduling algorithm. The advantages of the learning-optimized trajectory and of the map compression method are illustrated in the context of intelligent IoT data harvesting.

cs.IT↗

arXiv2015

Optimization of Energy Harvesting MISO Communication System with Feedback

Optimization of a point-to-point (p2p) multipleinput single-output (MISO) communication system is considered when both the transmitter (TX) and the receiver (RX) have energy harvesting (EH) capabilities. The RX is interested in feeding back the channel state information (CSI) to the TX to help improve the transmission rate. The objective is to maximize the throughput by a deadline, subject to the EH constraints at the TX and the RX. The throughput metric considered is an upper bound on the ergodic rate of the MISO channel with beamforming and limited feedback. Feedback bit allocation and transmission policies that maximize the upper bound on the ergodic rate are obtained. Tools from majorization theory are used to simplify the formulated optimization problems. Optimal policies obtained for the modified problem outperform the naive scheme in which no intelligent management of energy is performed.

cs.IT↗