arXiv subjects

Rajneesh Bhardwaj

Publications and source records attributed to Rajneesh Bhardwaj.

26 records · Page 2Linked to original sources

arXiv2016

Computational Study of Bouncing and Non-bouncing Droplets Impacting on Superhydrophobic Surfaces

We numerically investigate bouncing and non-bouncing of droplets during isothermal impact on superhydrophobic surfaces. An in-house, experimentally-validated, finite-element method based computational model is employed to simulate the droplet impact dynamics and transient fluid flow within the droplet. The liquid-gas interface is tracked accurately in Lagrangian framework with dynamic wetting boundary condition at three-phase contact line. The interplay of kinetic, surface and gravitational energies is investigated via systematic variation of impact velocity and equilibrium contact angle. The numerical simulations demonstrate that the droplet bounces off the surface if the total droplet energy at the instance of maximum recoiling exceeds the initial surface and gravitational energy, otherwise not. The non-bouncing droplet is characterized by the oscillations on the free surface due to competition between the kinetic and surface energy. The droplet dimensions and shapes obtained at different times by the simulations are compared with the respective measurements available in the literature. Comparisons show good agreement of numerical data with measurements and the computational model is able to reconstruct the bouncing and non-bouncing of the droplet as seen in the measurements. The simulated internal flow helps to understand the impact dynamics as well as the interplay of the associated energies during the bouncing and non-bouncing.

physics.flu-dyn↗

arXiv2016

Droplet Impact Dynamics on Micropillared Hydrophobic Surfaces

The effect of pitch of the pillars and impact velocity are studied for the impact dynamics of a microliter water droplet on a micropillared hydrophobic surface. The results are presented qualitatively by the high-speed photography and quantitatively by the temporal variation of wetted diameter and droplet height. A characterization of the transient quantitative results is a novel aspect of our work. Three distinct regimes, namely, non-bouncing, complete bouncing and partial bouncing are presented. A critical pitch as well as impact velocity exists for the transition from one regime to another. This is explained with a demonstration of Cassie to Wenzel wetting transition in which the liquid penetrates in the grooves between the pillars at larger pitch or impact velocity. The regimes are demarcated on a map of pitch and impact velocity. A good agreement is reported between the present measurements and published analytical models.

physics.flu-dyn↗

arXiv2015

Flow-Induced Deformation of a Flexible Thin Structure as Manifestation of Heat Transfer Enhancement

Flow-induced deformation of thin structures coupled with convective heat transfer has potential applications in energy harvesting and is important for understanding functioning of several biological systems. We numerically demonstrate large-scale flow-induced deformation as an effective passive heat transfer enhancement technique. An in-house, strongly-coupled fluid-structure interaction (FSI) solver is employed in which flow and structure solvers are based on sharp-interface immersed boundary and finite element method, respectively. In the present work, we validate convective heat transfer module of the in-house FSI solver against several benchmark examples of conduction and convective heat transfer including moving structure boundaries. The thermal augmentation is investigated as well as quantified for the flow-induced deformation of an elastic thin plate attached to lee side of a rigid cylinder in a heated channel laminar flow. We show that the wake vortices past the plate sweep higher sources of vorticity generated on the channel walls out into the high velocity regions, promoting the mixing of the fluid. The self-sustained motion of the plate assists in convective mixing, augmenting convection in bulk and near the walls, and thereby reducing thermal boundary layer thickness as well as improving Nusselt number at the channel walls. We quantify the thermal improvement with respect to channel flow without any bluff body and analyze the role of Reynolds number, Prandtl number and material properties of the plate in the thermal augmentation.

physics.flu-dyn↗

arXiv2010

Non-isothermal wetting during impact of millimeter size water drop on a flat substrate: numerical investigation and comparison with high-speed visualization experiments

The objective of this work is to develop and validate a numerical model to study wetting during the impact of millimeter-size drops on a flat, smooth, solid substrate under isothermal or non-isothermal conditions. A finite-element modeling is used to simulate the transient fluid dynamics and heat transfer, considering Laplace forces on the liquid-gas boundary. The Lagrangian scheme allows a very precise tracking of the free surface deformation. In this work, the numerical model is extended to account for a temperature-dependent viscosity and for dynamic wetting at the contact line. Numerical results are presented to study the influence of the kinetic wetting parameter on the wetting incipience and behavior. Our results show the influence of wetting on the spreading and the transient drop shape. Also, numerical results are compared with high-speed visualization, for cases of isothermal and non-isothermal impact. Matching between simulations and high-speed visualization allows the determination of the value of the kinetic wetting parameter. Our main finding is that warm drops spread more than cold drops because of a reduction of viscous forces, and not because of an increase of wetting.

physics.flu-dyn↗

arXiv2010

A numerical investigation on the influence of liquid properties and interfacial heat transfer during microdroplet deposition onto a glass substrate

This work investigates the impingement of a liquid microdroplet onto a glass substrate at different temperatures. A finite-element model is applied to simulate the transient fluid dynamics and heat transfer during the process. Results for impingement under both isothermal and non-isothermal conditions are presented for four liquids: isopropanol, water, dielectric fluid (FC-72) and eutectic tin-lead solder (63Sn-37Pb). The objective of the work is to select liquids for a combined numerical and experimental study involving a high resolution, laser-based interfacial temperature measurement to measure interfacial heat transfer during microdroplet deposition. Applications include spray cooling, micro-manufacturing and coating processes, and electronics packaging. The initial droplet diameter and impact velocity are 80 μm and 5 m/s, respectively. For isothermal impact, our simulations with water and isopropanol show very good agreement with experiments. The magnitude and rates of spreading for all four liquids are shown and compared. For non-isothermal impacts, the transient drop and substrate temperatures are expressed in a non-dimensional way. The influence of imperfect thermal contact at the interface between the drop and the substrate is assessed for a realistic range of interfacial Biot numbers. We discuss the coupled influence of interfacial Biot numbers and hydrodynamics on the initiation of phase change.

physics.flu-dyn↗

arXiv2010

Self-assembly of colloidal particles from evaporating droplets: role of DLVO interactions and proposition of a phase diagram

The shape of deposits obtained from drying drops containing colloidal particles matters for technologies such as inkjet printing, microelectronics and bioassay manufacturing. In this work, the formation of deposits during the drying of nanoliter drops containing colloidal particles is investigated experimentally with microscopy and profilometry, and theoretically with an inhouse finite-element code. The system studied involves aqueous drops containing titania nanoparticles evaporating on a glass substrate. Deposit shapes from spotted drops at different pH values are measured using a laser profilometer. Our results show that the pH of the solution influences the dried deposit pattern, which can be ring-like or more uniform. The transition between these patterns is explained by considering how DLVO interactions such as the electrostatic and van der Waals forces modify the particle deposition process. Also a phase diagram is proposed to describe how the shape of a colloidal deposit results from the competition between three flow patterns: a radial flow driven by evaporation at the wetting line, a Marangoni recirculating flow driven by surface tension gradients, and the transport of particles towards the substrate driven by DLVO interactions. This phase diagram explains three types of deposits commonly observed experimentally, such as a peripheral ring, a small central bump, or a uniform layer. Simulations and experiments are found in very good agreement.

physics.flu-dyn↗

arXiv2010

Interfacial temperature measurements, high-speed visualization and finite-element simulations of droplet impact and evaporation on a solid surface

The objective of this work is to investigate the coupling of fluid dynamics, heat transfer and mass transfer during the impact and evaporation of droplets on a heated solid substrate. A laser-based thermoreflectance method is used to measure the temperature at the solid-liquid interface, with a time and space resolution of 100 μs and 20 μm, respectively. Isopropanol droplets with micro- and nanoliter volumes are considered. A finite-element model is used to simulate the transient fluid dynamics and heat transfer during the droplet deposition process, considering the dynamics of wetting as well as Laplace and Marangoni stresses on the liquid-gas boundary. For cases involving evaporation, the diffusion of vapor in the atmosphere is solved numerically, providing an exact boundary condition for the evaporative flux at the droplet-air interface. High-speed visualizations are performed to provide matching parameters for the wetting model used in the simulations. Numerical and experimental results are compared for the transient heat transfer and the fluid dynamics involved during the droplet deposition. Our results describe and explain temperature oscillations at the drop-substrate interface during the early stages of impact. For the first time, a full simulation of the impact and subsequent evaporation of a drop on a heated surface is performed, and excellent agreement is found with the experimental results. Our results also shed light on the influence of wetting on the heat transfer during evaporation.

physics.flu-dyn↗

arXiv2010

Pattern formation during the evaporation of a colloidal nanoliter drop: a numerical and experimental study

An efficient way to precisely pattern particles on solid surfaces is to dispense and evaporate colloidal drops, as for bioassays. The dried deposits often exhibit complex structures exemplified by the coffee ring pattern, where most particles have accumulated at the periphery of the deposit. In this work, the formation of deposits during the drying of nanoliter colloidal drops on a flat substrate is investigated numerically and experimentally. A finite-element numerical model is developed that solves the Navier-Stokes, heat and mass transport equations in a Lagrangian framework. The diffusion of vapor in the atmosphere is solved numerically, providing an exact boundary condition for the evaporative flux at the droplet-air interface. Laplace stresses and thermal Marangoni stresses are accounted for. The particle concentration is tracked by solving a continuum advection-diffusion equation. Wetting line motion and the interaction of the free surface of the drop with the growing deposit are modeled based on criteria on wetting angles. Numerical results for evaporation times and flow field are in very good agreement with published experimental and theoretical results. We also performed transient visualization experiments of water and isopropanol drops loaded with polystyrene microsphere evaporating on respectively glass and polydimethylsiloxane substrates. Measured evaporation times, deposit shape and sizes, and flow fields are in very good agreement with the numerical results. Different flow patterns caused by the competition of Marangoni loops and radial flow are shown to determine the deposit shape to be either a ring-like pattern or a homogeneous bump.

physics.flu-dyn↗