SearcharxivSearch

arXiv subjects

Rajnikant Sharma

Publications and source records attributed to Rajnikant Sharma.

9 recordsLinked to original sources

Collaborative Threat-Aware Autonomy (CTAA)

Navigating teams of unmanned vehicles through environments containing dynamic, adversarial Weapon Engagement Zones~(WEZs) poses a fundamental challenge to mission success: a single vehicle, however capable its onboard guidance, remains a single point of failure. This paper presents a role-differentiated multi-agent framework for collaborative threat-aware trajectory planning in which a fleet of Autonomous Collaborative Platforms~(ACPs) is assigned distinct roles primary intercept, escort, and decoy to improve team-level mission success probability while managing individual WEZ exposure. Each ACP independently employs a reactive guidance law derived from the Collision Sphere Boundary for Evader Zero-Set~(CSBEZ), which accounts for pursuer maneuverability constraints imposed by minimum turn radius, and steers the vehicle toward the safest heading that also makes progress toward its goal. Role assignment and spatial route separation induce two complementary effects: probabilistic redundancy, in which $N$ independent paths raise the team success probability and threat saturation, in which lower-priority escorts and decoys draw adversary attention and free the primary vehicle to transit uncontested.

cs.MA

Deployable, Data-Driven Unmanned Vehicle Navigation System in GPS-Denied, Feature-Deficient Environments

This paper presents a novel data-driven navigation system to navigate an Unmanned Vehicle (UV) in GPS-denied, feature-deficient environments such as tunnels, or mines. The method utilizes landmarks that vehicle can deploy and measure range from to enable localization as the vehicle traverses its pre-defined path through the tunnel. A key question that arises in such scenario is to estimate and reduce the number of landmarks that needs to be deployed for localization before the start of the mission, given some information about the environment. The main focus is to keep the maximum position uncertainty at a desired value. In this article, we develop a novel vehicle navigation system in GPS-denied, feature-deficient environment by combining techniques from estimation, machine learning, and mixed-integer convex optimization. This article develops a novel, systematic method to perform localization and navigate the UV through the environment with minimum number of landmarks while maintaining desired localization accuracy. We also present extensive simulation experiments on different scenarios that corroborate the effectiveness of the proposed navigation system.

cs.RO

Modeling and Simulation of COVID-19 Pandemic for Cincinnati Tri-State Area

In this paper, we use SIR model to simulate the COVID-19 pandemic for Cincinnati Tri-State Area. We have built a representative population of Cincinnati that includes movements for traveling to stores, schools, workplaces, and traveling to friends houses. Using this model, we simulate the effect of quarantine, return to work, and panic buying. We show that that there will be a second wave of infections when people return to work and significant increase in number of infections when there is panic buying at stores with the announcement of the quarantine measures.

cs.SI

Routing Multiple Unmanned Vehicles in GPS-Denied Environments

This article aims to develop novel path planning algorithms required to deploy multiple unmanned vehicles in Global Positioning System (GPS) denied environments. Unmanned vehicles (ground or aerial) are ideal platforms for executing monitoring and data gathering tasks in civil infrastructure management, agriculture, public safety, law enforcement, disaster relief and transportation. Significant advancement in the area of path planning for unmanned vehicles over the last decade has resulted in a suite of algorithms that can handle heterogeneity, motion and other on-board resource constraints for these vehicles. However, most of these routing and path planning algorithms rely on the availability of the GPS information. Unintentional and intentional interference and design errors can cause GPS service outages, which in turn, can crucially affect all the systems that depend on GPS information. This article addresses a multiple vehicle path planning problem that arises while deploying a team of unmanned vehicles for monitoring applications in GPS-denied environments and presents a mathematical formulation and algorithms for solving the problem. Simulation results are also presented to corroborate the performance of the proposed algorithms.

math.OC

Landmark Placement for Localization in a GPS-denied Environment

Path planning algorithms for unmanned aerial or ground vehicles, in many surveillance applications, rely on Global Positioning System (GPS) information for localization. However, disruption of GPS signals, by intention or otherwise, can render these plans and algorithms ineffective. This article provides a way of addressing this issue by utilizing stationary landmarks to aid localization in such GPS-disrupted or GPS-denied environment. In particular, given the vehicle's path, we formulate a landmark-placement problem and present algorithms to place the minimum number of landmarks while satisfying the localization, sensing, and collision-avoidance constraints. The performance of such a placement is also evaluated via extensive simulations on ground robots.

math.OC

Routing Unmanned Vehicles in GPS-Denied Environments

Most of the routing algorithms for unmanned vehicles, that arise in data gathering and monitoring applications in the literature, rely on the Global Positioning System (GPS) information for localization. However, disruption of GPS signals either intentionally or unintentionally could potentially render these algorithms not applicable. In this article, we present a novel method to address this difficulty by combining methods from cooperative localization and routing. In particular, the article formulates a fundamental combinatorial optimization problem to plan routes for an unmanned vehicle in a GPS-restricted environment while enabling localization for the vehicle. We also develop algorithms to compute optimal paths for the vehicle using the proposed formulation. Extensive simulation results are also presented to corroborate the effectiveness and performance of the proposed formulation and algorithms.

cs.RO

Multi-vehicle Path Following using Modified Trajectory Shaping Guidance

In this paper, we formulate a virtual target-based path following guidance law aimed towards multi-vehicle path following problem. The guidance law is well suited to precisely follow circular paths while minting desired distance between two adjacent vehicles where path information is only available to the lead vehicle. We analytically show lateral and longitudnal stability and convergence on the path. This is also validated through simulation and experimental results.

eess.SY

Rudder Augmented Trajectory Correction for Small UAV to Minimize Lateral Image Errors

Civil applications for unmanned aerial vehicles (UAVs) have increased rapidly over the last few years. In the realm of civil applications, many aircraft carry cameras that are physically fixed to the airframe. While this yields a simple and robust remote sensing platform, the imagery quality diminishes with increasing attitude errors. A rudder augmented trajectory correction method for small unmanned aerial vehicles is discussed in this paper. The goal of this type of controller is to minimize the lateral image errors of body fixed non-gimbaled cameras. We present a comparison to current aileron only trajectory correction autopilots. Simulation and flight test results are presented that show significant reduction in the roll angle present during trajectory correction resulting in a large effect on total flight line image deviations.

eess.SY

Low Cost, Open-Source Testbed to Enable Full-Sized Automated Vehicle Research

An open-source vehicle testbed to enable the exploration of automation technologies for road vehicles is presented. The platform hardware and software, based on the Robot Operating System (ROS), are detailed. Two methods are discussed for enabling the remote control of a vehicle (in this case, an electric 2013 Ford Focus). The first approach used digital filtering of Controller Area Network (CAN) messages. In the case of the test vehicle, this approach allowed for the control of acceleration from a tap-point on the CAN bus and the OBD-II port. The second approach, based on the emulation of the analog output(s) of a vehicle's accelerator pedal, brake pedal, and steering torque sensors, is more generally applicable and, in the test vehicle, allowed for the full control vehicle acceleration, braking, and steering. To demonstrate the utility of the testbed for vehicle automation research, system identification was performed on the test vehicle and speed and steering controllers were designed to allow the vehicle to follow a predetermined path. The resulting system was shown to be differentially flat, and a high level path following algorithm was developed using the differentially flat properties and state feedback. The path following algorithm is experimentally validated on the automation testbed developed in the paper.

eess.SY