arXiv subjects

Ramavarapu S. Sreenivas

Publications and source records attributed to Ramavarapu S. Sreenivas.

8 recordsLinked to original sources

arXiv2026

VCTP: Vehicle-Conditioned Terrain Planning for Off-Road Navigation

A vehicle's heading affects both the surfaces beneath its tires and its pitch and roll. We present Vehicle-Conditioned Terrain Planning (VCTP), which retains these relationships by evaluating shared elevation and surface-ID layers at eight headings. Body geometry constrains admissibility, while loaded wheel contacts determine modeled surface cost and predicted pitch and roll. Established D* Lite and vehicle-state search use these evaluations to plan routes with forward and reverse motion. When observations change, VCTP recomputes every affected body or contact query. In fully observed two-track simulations, sampling at wheel contacts rather than at the vehicle center lowers modeled surface cost by 39.3% while shortening the route. In offline planning on RGator recordings, VCTP also reduces modeled costs over identified surfaces and observed support relative to distance-focused planning, although incomplete coverage leaves full-route rankings unresolved. Selective updates match full recomputation in all 474 comparisons using recorded map changes. These results identify when wheel-contact placement and vehicle heading affect route choice.

cs.RO↗

arXiv2026

Underwater Dead Reckoning with Deployable Situation-Triggered Covariance Scheduling

Underwater dead reckoning estimates vehicle position when vision is unavailable and external positioning cannot be assumed. A single set of filter parameters can work well in many situations, but fixed tuning may be poorly matched during turns, motion transitions, or periods when sensor measurements are less reliable. This paper presents the Situation-Triggered Calibrated Adaptive Robust Extended Kalman Filter for a BlueROV2. An onboard probabilistic trigger identifies the current motion situation while one error-state filter runs continuously. When the trigger is confident, the filter changes only to the corresponding pre-calibrated process- and measurement-noise matrices; the state estimate, covariance history, dynamics, and measurement models are not reset or replaced. The trigger, noise profiles, and a one-time Doppler velocity log yaw-alignment correction are calibrated offline using sparse AprilTag-supervised pool runs. A separate validation set selects the scheduling policy, which is then fixed before held-out testing. Across four held-out pool runs, the method reduces label-weighted mean per-run translation root-mean-square error from 0.488 m to 0.471 m relative to the same filter backbone with one global noise profile, and every held-out run favors the scheduled method. A paired bootstrap over 10-second segments gives a candidate-minus-baseline difference of -0.017 m with a 95% confidence interval of [-0.024, -0.008] m, while orientation error remains essentially unchanged. These results indicate that situation-aware covariance scheduling provides a modest but consistent vision-free dead-reckoning improvement without switching estimators or resetting the filter.

cs.RO↗

arXiv2026

Neuro-Symbolic Generation of Explanations for Robot Policies with Weighted Signal Temporal Logic

Neural network-based policies have demonstrated success in many robotic applications, but often lack human-explanability, which poses challenges in safety-critical deployments. To address this, we propose a neuro-symbolic explanation framework that generates a weighted signal temporal logic (wSTL) specification to describe a robot policy in a interpretable form. Existing methods typically produce explanations that are verbose and inconsistent, which hinders explainability, and loose, which do not give meaningful insights into the underlying policy. We address these issues by introducing a simplification process consisting of predicate filtering, regularization, and iterative pruning. We also introduce three novel explainability evaluation metrics -- conciseness, consistency, and strictness -- to assess explanation quality beyond conventional classification metrics. Our method is validated in three simulated robotic environments, where it outperforms baselines in generating concise, consistent, and strict wSTL explanations without sacrificing classification accuracy. This work bridges policy learning with formal methods, contributing to safer and more transparent decision-making in robotics.

cs.RO↗

arXiv2026

LDLT L-Lipschitz Network Weight Parameterization Initialization

We analyze initialization dynamics for LDLT-based $\mathcal{L}$-Lipschitz layers by deriving the exact marginal output variance when the underlying parameter matrix $W_0\in \mathbb{R}^{m\times n}$ is initialized with IID Gaussian entries $\mathcal{N}(0,σ^2)$. The Wishart distribution, $S=W_0W_0^\top\sim\mathcal{W}_m(n,σ^2 \boldsymbol{I}_m)$, used for computing the output marginal variance is derived in closed form using expectations of zonal polynomials via James' theorem and a Laplace-integral expansion of $(α\boldsymbol{I}_m+S)^{-1}$. We develop an Isserlis/Wick-based combinatorial expansion for $\operatorname{\mathbb{E}}\left[\operatorname{tr}(S^k)\right]$ and provide explicit truncated moments up to $k=10$, which yield accurate series approximations for small-to-moderate $σ^2$. Monte Carlo experiments confirm the theoretical estimates. Furthermore, empirical analysis was performed to quantify that, using current He or Kaiming initialization with scaling $1/\sqrt{n}$, the output variance is $0.41$, whereas the new parameterization with $10/ \sqrt{n}$ for $α=1$ results in an output variance of $0.9$. The findings clarify why deep $\mathcal{L}$-Lipschitz networks suffer rapid information loss at initialization and offer practical prescriptions for choosing initialization hyperparameters to mitigate this effect. However, using the Higgs boson classification dataset, a hyperparameter sweep over optimizers, initialization scale, and depth was conducted to validate the results on real-world data, showing that although the derivation ensures variance preservation, empirical results indicate He initialization still performs better.

cs.LG↗

arXiv2025

LDLT $\mathcal{L}$-Lipschitz Network: Generalized Deep End-To-End Lipschitz Network Construction

Deep residual networks (ResNets) have demonstrated outstanding success in computer vision tasks, attributed to their ability to maintain gradient flow through deep architectures. Simultaneously, controlling the Lipschitz constant in neural networks has emerged as an essential area of research to enhance adversarial robustness and network certifiability. This paper presents a rigorous approach to the general design of $\mathcal{L}$-Lipschitz deep residual networks using a Linear Matrix Inequality (LMI) framework. Initially, the ResNet architecture was reformulated as a cyclic tridiagonal LMI, and closed-form constraints on network parameters were derived to ensure $\mathcal{L}$-Lipschitz continuity; however, using a new $LDL^\top$ decomposition approach for certifying LMI feasibility, we extend the construction of $\mathcal{L}$-Lipchitz networks to any other nonlinear architecture. Our contributions include a provable parameterization methodology for constructing Lipschitz-constrained residual networks and other hierarchical architectures. Cholesky decomposition is also used for efficient parameterization. These findings enable robust network designs applicable to adversarial robustness, certified training, and control systems. The $LDL^\top$ formulation is shown to be a tight relaxation of the SDP-based network, maintaining full expressiveness and achieving 3\%-13\% accuracy gains over SLL Layers on 121 UCI data sets.

cs.LG↗

arXiv2025

1-Lipschitz Network Initialization for Certifiably Robust Classification Applications: A Decay Problem

This paper discusses the weight parametrization of two standard 1-Lipschitz network architectures, the Almost-Orthogonal-Layers (AOL) and the SDP-based Lipschitz Layers (SLL). It examines their impact on initialization for deep 1-Lipschitz feedforward networks, and discusses underlying issues surrounding this initialization. These networks are mainly used in certifiably robust classification applications to combat adversarial attacks by limiting the impact of perturbations on the classification output. Exact and upper bounds for the parameterized weight variance were calculated assuming a standard Normal distribution initialization; additionally, an upper bound was computed assuming a Generalized Normal Distribution, generalizing the proof for Uniform, Laplace, and Normal distribution weight initializations. It is demonstrated that the weight variance holds no bearing on the output variance distribution and that only the dimension of the weight matrices matters. Additionally, this paper demonstrates that the weight initialization always causes deep 1-Lipschitz networks to decay to zero.

cs.LG↗

arXiv2025

Safety Monitor for Off-Road Planning with Uncertainty Bounded Bekker Costs

Reliable off-road autonomy requires operational constraints so that behavior stays predictable and safe when soil strength is uncertain. This paper presents a runtime assurance safety monitor that collaborates with any planner and uses a Bekker-based cost model with bounded uncertainty. The monitor builds an upper confidence traversal cost from a lightweight pressure sinkage model identified in field tests and checks each planned motion against two limits: maximum sinkage and rollover margin. If the risk of crossing either limit is too high, the monitor switches to a certified fallback that reduces vehicle speed, increases standoff from soft ground, or stops on firmer soil. This separation lets the planner focus on efficiency while the monitor keeps the vehicle within clear safety limits on board. Wheel geometry, wheel load estimate, and a soil raster serve as inputs, which tie safety directly to vehicle design and let the monitor set clear limits on speed, curvature, and stopping at run time. The method carries uncertainty analytically into the upper confidence cost and applies simple intervention rules. Tuning of the sinkage limit, rollover margin, and risk window trades efficiency for caution while keeping the monitor light enough for embedded processors. Results from a simulation environment spanning loam to sand include intervention rates, violation probability, and path efficiency relative to the nominal plan, and a benchtop static loading check provides initial empirical validation.

eess.SY↗

arXiv2025

On Generating Explanations for Reinforcement Learning Policies: An Empirical Study

Understanding a \textit{reinforcement learning} policy, which guides state-to-action mappings to maximize rewards, necessitates an accompanying explanation for human comprehension. In this paper, we introduce a set of \textit{linear temporal logic} formulae designed to provide explanations for policies, and an algorithm for searching through those formulae for the one that best explains a given policy. Our focus is on explanations that elucidate both the ultimate objectives accomplished by the policy and the prerequisite conditions it upholds throughout its execution. The effectiveness of our proposed approach is illustrated through a simulated game of capture-the-flag and a car-parking environment,

cs.AI↗