Searcharxiv⌕ Search

arXiv subjects

Rami Barends

Publications and source records attributed to Rami Barends.

At least 19 recordsLinked to original sources
arXiv2026

Contactless terahertz mapping of wafer-scale superconducting NbTiN thin films

For large-scale superconducting quantum technology, e.g. quantum computing, the homogeneity of wafer-scale superconducting thin films is vital for consistent performance of the fabricated devices. Terahertz (THz) spectroscopy as a contactless and non-destructive measurement technique is a powerful tool to characterize the superconducting films. In this work, a set of niobium titanium nitride (NbTiN) thin films on 4-inch and 6-inch silicon wafers, grown via plasma-enhanced magnetron sputtering, are investigated via THz spectroscopy: full wafers are mapped at room temperatures and exemplary segments are characterized at cryogenic temperatures. The deviations in observed sheet resistance depend on the used deposition device and the film thickness. While the deviations in superconducting sheet kinetic inductance match those of the normal-state sheet resistance, the critical temperature and energy gap exhibit little variation. This THz mapping technique demonstrates the feasibility of evaluating wafer-scale superconducting thin films before lithography, facilitating preparation of the thin films for reproducible device fabrication.

cond-mat.supr-con↗
arXiv2026

Highly crystalline superconducting TiN resonators grown on thermally reconstructed sapphire

High quality crystalline growth of a thin film on sapphire requires sufficient substrate preparation, often achieved via the use of aggressive chemical cleaning. Direct thermal reconstruction of the sapphire substrate via a CO$_2$ laser beam may allow for an alternative way to prepare the substrate for epitaxy without the use of any chemical processing. Within this work, we demonstrate that thermal annealing of sapphire into its ($\sqrt{31}$$\times$$\sqrt{31}$)$R$$\pm$9{\deg} reconstruction is a valid alternative preparation technique for sapphire substrates. TiN films grown via plasma-assisted molecular beam epitaxy upon these substrates exhibit greater crystallinity than those grown on chemically cleaned sapphire substrates. Superconducting resonators fabricated from these films exhibit similar performance, with many possessing internal quality factors at single photon levels greater than 10$^6$ for both substrate preparation methods.

cond-mat.supr-con↗
arXiv2026

Simple analytical flux-tuned iSWAP pulses for leakage suppression

Fast, high-fidelity two-qubit gates are a key requirement for fault-tolerant quantum computation. Tunable coupler architectures provide a flexible approach for implementing entangling gates through flux control with large on-off ratios, but fast flux modulation can induce diabatic transitions and population leakage to non-computational states, limiting gate performance. Here we present an analytical flux control method enabling derivative removal by adiabatic gate ($\Phi$-DRAG) for suppressing leakage in flux tunable two-qubit gates. We show that $\Phi$-DRAG differs fundamentally from conventional microwave implementations and derive modified flux modulation protocols that suppress leakage below $10^{-4}$ for fast entangling gates. The method remains effective across a range of asymmetry between qubit anharmonicities and different circuit parameters, enabling high-fidelity two-qubit gates within the fifteen nanosecond range.

quant-ph↗
arXiv2025

Analytical blueprint for 99.999% fidelity X-gates on present superconducting hardware under strong driving

Achieving very fast gates that undercut the natural limits set by decoherence requires going into the strong driving limit. Realizing single-qubit control predicted beyond semi-classical, time-dependent modeling has yet to be experimentally realized on superconducting and most other computing platforms. In this regime, the common model of dynamics within a three-level manifold breaks down, and instead, we see new quantum error channels growing abruptly with decreasing time. To identify these error processes we systematically calculate the effect of multi-photon transitions that occur out of the computational space. We then derive analytical formulas to suppress these effects, as well as amplitude and phase errors on the qubit space; we term these R1D for suppressing the $|0\rangle-|2\rangle$ transition and R2D when also suppressing $|1\rangle-|3\rangle$ leakage. We also answer long-standing questions about the optimal values of the DRAG prefactor as well as constant detuning, when accounting for time-ordering, and also show how to calibrate other prefactors for further performance improvement. Upon correcting these varied sources of error, we numerically demonstrate gate infidelities below $10^{-5}$ for a 7ns $\pi$-rotation when incorporating existing decoherence rates.

quant-ph↗
arXiv2021

Resolving catastrophic error bursts from cosmic rays in large arrays of superconducting qubits

Scalable quantum computing can become a reality with error correction, provided coherent qubits can be constructed in large arrays. The key premise is that physical errors can remain both small and sufficiently uncorrelated as devices scale, so that logical error rates can be exponentially suppressed. However, energetic impacts from cosmic rays and latent radioactivity violate both of these assumptions. An impinging particle ionizes the substrate, radiating high energy phonons that induce a burst of quasiparticles, destroying qubit coherence throughout the device. High-energy radiation has been identified as a source of error in pilot superconducting quantum devices, but lacking a measurement technique able to resolve a single event in detail, the effect on large scale algorithms and error correction in particular remains an open question. Elucidating the physics involved requires operating large numbers of qubits at the same rapid timescales as in error correction, exposing the event's evolution in time and spread in space. Here, we directly observe high-energy rays impacting a large-scale quantum processor. We introduce a rapid space and time-multiplexed measurement method and identify large bursts of quasiparticles that simultaneously and severely limit the energy coherence of all qubits, causing chip-wide failure. We track the events from their initial localised impact to high error rates across the chip. Our results provide direct insights into the scale and dynamics of these damaging error bursts in large-scale devices, and highlight the necessity of mitigation to enable quantum computing to scale.

quant-ph↗
arXiv2021

Exponential suppression of bit or phase flip errors with repetitive error correction

Realizing the potential of quantum computing will require achieving sufficiently low logical error rates. Many applications call for error rates in the $10^{-15}$ regime, but state-of-the-art quantum platforms typically have physical error rates near $10^{-3}$. Quantum error correction (QEC) promises to bridge this divide by distributing quantum logical information across many physical qubits so that errors can be detected and corrected. Logical errors are then exponentially suppressed as the number of physical qubits grows, provided that the physical error rates are below a certain threshold. QEC also requires that the errors are local and that performance is maintained over many rounds of error correction, two major outstanding experimental challenges. Here, we implement 1D repetition codes embedded in a 2D grid of superconducting qubits which demonstrate exponential suppression of bit or phase-flip errors, reducing logical error per round by more than $100\times$ when increasing the number of qubits from 5 to 21. Crucially, this error suppression is stable over 50 rounds of error correction. We also introduce a method for analyzing error correlations with high precision, and characterize the locality of errors in a device performing QEC for the first time. Finally, we perform error detection using a small 2D surface code logical qubit on the same device, and show that the results from both 1D and 2D codes agree with numerical simulations using a simple depolarizing error model. These findings demonstrate that superconducting qubits are on a viable path towards fault tolerant quantum computing.

quant-ph↗
arXiv2021

Quantum Approximate Optimization of Non-Planar Graph Problems on a Planar Superconducting Processor

We demonstrate the application of the Google Sycamore superconducting qubit quantum processor to combinatorial optimization problems with the quantum approximate optimization algorithm (QAOA). Like past QAOA experiments, we study performance for problems defined on the (planar) connectivity graph of our hardware; however, we also apply the QAOA to the Sherrington-Kirkpatrick model and MaxCut, both high dimensional graph problems for which the QAOA requires significant compilation. Experimental scans of the QAOA energy landscape show good agreement with theory across even the largest instances studied (23 qubits) and we are able to perform variational optimization successfully. For problems defined on our hardware graph we obtain an approximation ratio that is independent of problem size and observe, for the first time, that performance increases with circuit depth. For problems requiring compilation, performance decreases with problem size but still provides an advantage over random guessing for circuits involving several thousand gates. This behavior highlights the challenge of using near-term quantum computers to optimize problems on graphs differing from hardware connectivity. As these graphs are more representative of real world instances, our results advocate for more emphasis on such problems in the developing tradition of using the QAOA as a holistic, device-level benchmark of quantum processors.

quant-ph↗
arXiv2021

Information Scrambling in Computationally Complex Quantum Circuits

Interaction in quantum systems can spread initially localized quantum information into the many degrees of freedom of the entire system. Understanding this process, known as quantum scrambling, is the key to resolving various conundrums in physics. Here, by measuring the time-dependent evolution and fluctuation of out-of-time-order correlators, we experimentally investigate the dynamics of quantum scrambling on a 53-qubit quantum processor. We engineer quantum circuits that distinguish the two mechanisms associated with quantum scrambling, operator spreading and operator entanglement, and experimentally observe their respective signatures. We show that while operator spreading is captured by an efficient classical model, operator entanglement requires exponentially scaled computational resources to simulate. These results open the path to studying complex and practically relevant physical observables with near-term quantum processors.

quant-ph↗
arXiv2020

Observation of separated dynamics of charge and spin in the Fermi-Hubbard model

Strongly correlated quantum systems give rise to many exotic physical phenomena, including high-temperature superconductivity. Simulating these systems on quantum computers may avoid the prohibitively high computational cost incurred in classical approaches. However, systematic errors and decoherence effects presented in current quantum devices make it difficult to achieve this. Here, we simulate the dynamics of the one-dimensional Fermi-Hubbard model using 16 qubits on a digital superconducting quantum processor. We observe separations in the spreading velocities of charge and spin densities in the highly excited regime, a regime that is beyond the conventional quasiparticle picture. To minimize systematic errors, we introduce an accurate gate calibration procedure that is fast enough to capture temporal drifts of the gate parameters. We also employ a sequence of error-mitigation techniques to reduce decoherence effects and residual systematic errors. These procedures allow us to simulate the time evolution of the model faithfully despite having over 600 two-qubit gates in our circuits. Our experiment charts a path to practical quantum simulation of strongly correlated phenomena using available quantum devices.

quant-ph↗
arXiv2020

Hartree-Fock on a superconducting qubit quantum computer

As the search continues for useful applications of noisy intermediate scale quantum devices, variational simulations of fermionic systems remain one of the most promising directions. Here, we perform a series of quantum simulations of chemistry the largest of which involved a dozen qubits, 78 two-qubit gates, and 114 one-qubit gates. We model the binding energy of ${\rm H}_6$, ${\rm H}_8$, ${\rm H}_{10}$ and ${\rm H}_{12}$ chains as well as the isomerization of diazene. We also demonstrate error-mitigation strategies based on $N$-representability which dramatically improve the effective fidelity of our experiments. Our parameterized ansatz circuits realize the Givens rotation approach to non-interacting fermion evolution, which we variationally optimize to prepare the Hartree-Fock wavefunction. This ubiquitous algorithmic primitive corresponds to a rotation of the orbital basis and is required by many proposals for correlated simulations of molecules and Hubbard models. Because non-interacting fermion evolutions are classically tractable to simulate, yet still generate highly entangled states over the computational basis, we use these experiments to benchmark the performance of our hardware while establishing a foundation for scaling up more complex correlated quantum simulations of chemistry.

quant-ph↗
arXiv2019

Supplementary information for "Quantum supremacy using a programmable superconducting processor"

This is an updated version of supplementary information to accompany "Quantum supremacy using a programmable superconducting processor", an article published in the October 24, 2019 issue of Nature. The main article is freely available at https://www.nature.com/articles/s41586-019-1666-5. Summary of changes since arXiv:1910.11333v1 (submitted 23 Oct 2019): added URL for qFlex source code; added Erratum section; added Figure S41 comparing statistical and total uncertainty for log and linear XEB; new References [1,65]; miscellaneous updates for clarity and style consistency; miscellaneous typographical and formatting corrections.

quant-ph↗
arXiv2019

Learning Non-Markovian Quantum Noise from Moiré-Enhanced Swap Spectroscopy with Deep Evolutionary Algorithm

Two-level-system (TLS) defects in amorphous dielectrics are a major source of noise and decoherence in solid-state qubits. Gate-dependent non-Markovian errors caused by TLS-qubit coupling are detrimental to fault-tolerant quantum computation and have not been rigorously treated in the existing literature. In this work, we derive the non-Markovian dynamics between TLS and qubits during a SWAP-like two-qubit gate and the associated average gate fidelity for frequency-tunable Transmon qubits. This gate dependent error model facilitates using qubits as sensors to simultaneously learn practical imperfections in both the qubit's environment and control waveforms. We combine the-state-of-art machine learning algorithm with Moiré-enhanced swap spectroscopy to achieve robust learning using noisy experimental data. Deep neural networks are used to represent the functional map from experimental data to TLS parameters and are trained through an evolutionary algorithm. Our method achieves the highest learning efficiency and robustness against experimental imperfections to-date, representing an important step towards in-situ quantum control optimization over environmental and control defects.

quant-ph↗
arXiv2019

Electric field spectroscopy of material defects in transmon qubits

Superconducting integrated circuits have demonstrated a tremendous potential to realize integrated quantum computing processors. However, the downside of the solid-state approach is that superconducting qubits suffer strongly from energy dissipation and environmental fluctuations caused by atomic-scale defects in device materials. Further progress towards upscaled quantum processors will require improvements in device fabrication techniques which need to be guided by novel analysis methods to understand and prevent mechanisms of defect formation. Here, we present a new technique to analyse individual defects in superconducting qubits by tuning them with applied electric fields. This provides a new spectroscopy method to extract the defects' energy distribution, electric dipole moments, and coherence times. Moreover, it enables one to distinguish defects residing in Josephson junction tunnel barriers from those at circuit interfaces. We find that defects at circuit interfaces are responsible for about 60% of the dielectric loss in the investigated transmon qubit sample. About 40% of all detected defects are contained in the tunnel barriers of the large-area parasitic Josephson junctions that occur collaterally in shadow evaporation, and only about 3% are identified as strongly coupled defects which presumably reside in the small-area qubit tunnel junctions. The demonstrated technique provides a valuable tool to assess the decoherence sources related to circuit interfaces and to tunnel junctions that is readily applicable to standard qubit samples.

cond-mat.supr-con↗
arXiv2019

A 28nm Bulk-CMOS 4-to-8GHz <2mW Cryogenic Pulse Modulator for Scalable Quantum Computing

Future quantum computing systems will require cryogenic integrated circuits to control and measure millions of qubits. In this paper, we report the design and characterization of a prototype cryogenic CMOS integrated circuit that has been optimized for the control of transmon qubits. The circuit has been integrated into a quantum measurement setup and its performance has been validated through multiple quantum control experiments.

quant-ph↗
arXiv2014

Strong environmental coupling in a Josephson parametric amplifier

We present a lumped-element Josephson parametric amplifier designed to operate with strong coupling to the environment. In this regime, we observe broadband frequency dependent amplification with multi-peaked gain profiles. We account for this behaviour using the "pumpistor" model which allows for frequency dependent variation of the external impedance. Using this understanding, we demonstrate control over gain profiles through changes in the environment impedance at a given frequency. With strong coupling to a suitable external impedance we observe a significant increase in dynamic range, and large amplification bandwidth up to 700 MHz giving near quantum-limited performance.

cond-mat.supr-con↗
arXiv2013

Fabrication and Characterization of Aluminum Airbridges for Superconducting Microwave Circuits

Superconducting microwave circuits based on coplanar waveguides (CPW) are susceptible to parasitic slotline modes which can lead to loss and decoherence. We motivate the use of superconducting airbridges as a reliable method for preventing the propagation of these modes. We describe the fabrication of these airbridges on superconducting resonators, which we use to measure the loss due to placing airbridges over CPW lines. We find that the additional loss at single photon levels is small, and decreases at higher drive powers.

cond-mat.mes-hall↗
arXiv2013

Design and characterization of a lumped element single-ended superconducting microwave parametric amplifier with on-chip flux bias line

We demonstrate a lumped-element Josephson parametric amplifier, using a single-ended design that includes an on-chip, high-bandwidth flux bias line. The amplifier can be pumped into its region of parametric gain through either the input port or through the flux bias line. Broadband amplification is achieved at a tunable frequency $ω/2 π$ between 5 to 7 GHz with quantum-limited noise performance, a gain-bandwidth product greater than 500 MHz, and an input saturation power in excess of -120 dBm. The bias line allows fast frequency tuning of the amplifier, with variations of hundreds of MHz over time scales shorter than 10 ns.

cond-mat.supr-con↗