arXiv subjects

Ramki Kalyanaraman

Publications and source records attributed to Ramki Kalyanaraman.

10 recordsLinked to original sources

arXiv2012

Demagnetization Borne Microscale Skyrmions

Magnetic systems are an exciting realm of study that is being explored on smaller and smaller scales. One extremely interesting magnetic state that has gained momentum in recent years is the skyrmionic state. It is characterized by a vortex where the edge magnetic moments point opposite to the core. Although skyrmions have many possible realizations, in practice, creating them in a lab is a difficult task to accomplish. In this work, new methods for skyrmion generation and customization are suggested. Skyrmionic behavior was numerically observed in minimally customized simulations of spheres, hemisphere, ellipsoids, and hemi-ellipsoids, for typ- ical Cobalt parameters, in a range from approximately 40 nm to 120 nm in diameter simply by applying a field.

cond-mat.mes-hall↗

arXiv2010

Thickness-dependent spontaneous dewetting morphology of ultrathin Ag films

We show here that the morphological pathway of spontaneous dewetting of ultrathin Ag films on SiO2 under nanosecond laser melting is found to be film thickness dependent. For films with thickness h between 2 <= h <= 9.5 nm, the morphology during the intermediate stages of dewetting consisted of bicontinuous structures. For films 11.5 <= h <= 20 nm, the intermediate stages consisted of regularly-sized holes. Measurement of the characteristic length scales for different stages of dewetting as a function of film thickness showed a systematic increase, which is consistent with the spinodal dewetting instability over the entire thickness range investigated. This change in morphology with thickness is consistent with observations made previously for polymer films [A. Sharma et al, Phys. Rev. Lett., v81, pp3463 (1998); R. Seemann et al, J. Phys. Cond. Matt., v13, pp4925, (2001)]. Based on the behavior of free energy curvature that incorporates intermolecular forces, we have estimated the morphological transition thickness for the intermolecular forces for Ag on SiO2 . The theory predictions agree well with observations for Ag. These results show that it is possible to form a variety of complex Ag nanomorphologies in a consistent manner, which could be useful in optical applications of Ag surfaces, such as in surface enhanced Raman sensing.

cond-mat.mtrl-sci↗

arXiv2007

Dynamics of ultrathin metal films on amorphous substrates

A mathematical model is developed to analyze the growth/decay rate of surface perturbations of an ultrathin metal film on an amorphous substrate (SiO_{2}). The formulation combines the approach of Mullins [J. Appl. Phys. v30, 77, 1959] for bulk substrates, in which curvature-driven mass transport and surface deformation can occur by surface/volume diffusion and evaporation-condensation processes, with that of Spencer et al. [Phys. Rev. Lett. v67, 26, 1991] to describe solid state transport in thin films under epitaxial strain. The model is applied to study the relative rate of solid state mass transport as compared to that of liquid phase dewetting in a thin film subjected to fast a thermal pulse. Specifically, we have recently shown that multiple cycles of nanosecond (ns) pulsed laser melting and resolidification of ultrathin metal films on amorphous substrates can lead to the formation of various types of spatially ordered nanostructures [Phys. Rev. B, v75, 235439 (2007)]. The pattern formation has been attributed to the dewetting of the thin film by a hydrodynamic instability. In such experiments the film is in the solid state during a substantial fraction of each thermal cycle. Results of a linear stability analysis based on the aforementioned model suggest that solid state mass transport has negligible effect on morphology changes of the surface. Hence, surface deformation caused by liquid phase instabilities is rapidly quenched-in during the cooling phase. This deformed state is further evolved by subsequent laser pulses. These results have implications to developing accurate computer simulations of thin film dewetting by energetic beams aimed at the manufacturing of optically active nanoscale materials for applications including information processing, optical devices and solar energy harvesting.

cond-mat.mtrl-sci↗

arXiv2007

In silico design of metal-dielectric nanocomposites for solar energy applications

Recently, a homogenization procedure has been proposed, based on the tight lower bounds of the Bergman-Milton formulation, and successfully applied to dilute ternary nanocomposites to predict optical data without using any fitting parameters [Garcia et al. Phys. Rev. B, 75, 045439 (2007)]. The procedure has been extended and applied to predict the absorption coefficient of a quaternary nanocomposite consisting of Cu, Ag, and Au nanospheres embedded in a SiO2 host matrix. Significant enhancement of the absorption coefficient is observed over the spectral range 350-800 nm. The magnitude of this enhancement can be controlled by varying the nanosphere diameter and the individual metal volume fraction with respect to the host matrix. We have determined the optimal composition resulting in enhanced broadband (350nm-800nm) absorption of the solar spectrum using a simulated annealing algorithm. Fabricating such composite materials with a desired optical absorption has potential applications in solar energy harvesting.

cond-mat.mtrl-sci↗

arXiv2007

The convolution theorem for nonlinear optics

We have expressed the nonlinear optical absorption of a semiconductor in terms of its linear spectrum. We determined that the two-photon absorption coefficient in a strong DC-electric field of a direct gap semiconductor can be expressed as the product of a differential operator times the convolution integral of the linear absorption without a DC-electric field and an Airy function. We have applied this formalism to calculate the two-photon absorption coefficient and nonlinear refraction for GaAs and ZnSe using their linear absorption and have found excellent agreement with available experimental data.

physics.optics↗

arXiv2007

Investigation of pulsed laser induced dewetting in nanoscopic metal films

Hydrodynamic pattern formation (PF) and dewetting resulting from pulsed laser induced melting of nanoscopic metal films have been used to create spatially ordered metal nanoparticle arrays with monomodal size distribution on SiO_{\text{2}}/Si substrates. PF was investigated for film thickness h\leq7 nm < laser absorption depth \sim11 nm and different sets of laser parameters, including energy density E and the irradiation time, as measured by the number of pulses n. PF was only observed to occur for E\geq E_{m}, where E_{m} denotes the h-dependent threshold energy required to melt the film. Even at such small length scales, theoretical predictions for E_{m} obtained from a continuum-level lumped parameter heat transfer model for the film temperature, coupled with the 1-D transient heat equation for the substrate phase, were consistent with experimental observations provided that the thickness dependence of the reflectivity of the metal-substrate bilayer was incorporated into the analysis. The spacing between the nanoparticles and the particle diameter were found to increase as h^{2} and h^{5/3} respectively, which is consistent with the predictions of the thin film hydrodynamic (TFH) dewetting theory. These results suggest that fast thermal processing can lead to novel pattern formation, including quenching of a wide range of length scales and morphologies.

cond-mat.mtrl-sci↗

arXiv2006

Self consistent determination of plasmonic resonances in ternary nanocomposites

We have developed a self consistent technique to predict the behavior of plasmon resonances in multi-component systems as a function of wavelength. This approach, based on the tight lower bounds of the Bergman-Milton formulation, is able to predict experimental optical data, including the positions, shifts and shapes of plasmonic peaks in ternary nanocomposites without using any ftting parameters. Our approach is based on viewing the mixing of 3 components as the mixing of 2 binary mixtures, each in the same host. We obtained excellent predictions of the experimental optical behavior for mixtures of Ag:Cu:SiO2 and alloys of Au-Cu:SiO2 and Ag-Au:H2 O, suggesting that the essential physics of plasmonic behavior is captured by this approach.

physics.optics↗

arXiv2006

Nanostructure and microstructure of laser-interference induced dynamic patterning of Co on Si

We have investigated the nanostructure and microstructure resulting from ns laser irradiation simultaneous with deposition of Co films on Si(001) substrates. The spatial order and length scales of the resulting nanopatterns and their crystalline microstructure were investigated as a function of film thickness h and laser energy density E using a combination of atomic force, scanning electron and transmission electron microscopies. The results could be classified into two distinct categories based on the laser energy density used. It was observed that the thickness-dependent E required to melt the Co film (E_{Co}) was lower than Si (E_{Si}) primarily because of the higher reflectivity of Si. Consequently, for energy densities E_{Co}<E_{1}<E_{Si} that preferentially melted the Co film, spatially ordered nanoparticles were formed and were attributed to capillary-driven transport in the liquid phase. The ordering length scale corresponded to the interference fringe spacing Λand the microstructure was primarily Co metal and a metal-rich silicide phase. The native oxide layer played an important role in minimizing the Co-Si reaction. For laser energy densities E_{2}\geq E_{Si}, spatially ordered patterns with periodic length scales L<Λwere observed and resulted from interference of an incident laser beam with a beam transmitted into the Si substrate. These nanopatterns showed one- as well as two-dimensional spatial ordering of the nanostructures. The microstructure in this laser energy regime was dominated by silicide formation. These results suggest that various nanostructures and microstructures, ranging from nearly pure metal to a Si-rich silicide phase can be formed by appropriate choice of the laser energy simultaneous with film growth.

cond-mat.mtrl-sci↗

arXiv2006

A compound figure of merit for photonic applications of metal nanocomposites

Selecting nanocomposites for photonic switching applications requires optimizing their thermal, nonlinear and two-photon absorption characteristics. We simplify this step by defining a compound figure of merit (FOM_{C}) for nanocomposites of noble metals in dielectric based on criteria that limit these structures in photonic applications, i.e. thermal heating and two-photon absorption. The device independent results predict extremely large values of FOM_{C} for a specific combination of the metal and insulator dielectric constant given by ε_{h}=\frac{ε_{1}-ε_{2}}{2}, where ε_{h} is the dielectric constant of the host and ε_{1} and ε_{2} are the real and imaginary parts for the metal.

cond-mat.mtrl-sci↗

arXiv2006

Robust nanopatterning by laser-induced dewetting of metal nanofilms

We have observed nanopattern formation with robust and controllable spatial ordering by laser-induced dewetting in nanoscopic metal films. Pattern evolution in Co film of thickness 1\leq h\leq8 nm on SiO_{2} was achieved under multiple pulse irradiation using a 9 ns pulse laser. Dewetting leads to the formation of cellular patterns which evolve into polygons that eventually break up into nanoparticles with monomodal size distribution and short range ordering in nearest-neighbour spacing R. Spatial ordering was attributed to a hydrodynamic thin film instability and resulted in a predictable variation of R and particle diameter D with h. The length scales R and D were found to be independent of the laser energy. These results suggest that spatially ordered metal nanoparticles can be robustly assembled by laser-induced dewetting.

cond-mat.mtrl-sci↗