arXiv subjects

Rampi Ramprasad

Publications and source records attributed to Rampi Ramprasad.

At least 55 records · Page 3Linked to original sources

arXiv2020

Computational framework for polymer synthesis to study dielectric properties using polarizable reactive molecular dynamics

The increased energy and power density required in modern electronics poses a challenge for designing new dielectric polymer materials with high energy density while maintaining low loss at high applied electric fields. Recently, an advanced computational screening method coupled with hierarchical modelling has accelerated the identification of promising high energy density materials. It is well known that the dielectric response of polymeric materials is largely influenced by their phases and local heterogeneous structures as well as operational temperature. Such inputs are crucial to accelerate the design and discovery of potential polymer candidates. However, an efficient computational framework to probe temperature dependence of the dielectric properties of polymers, while incorporating effects controlled by their morphology is still lacking. In this paper, we propose a scalable computational framework based on reactive molecular dynamics with a valence-state aware polarizable charge model, which is capable of handling practically relevant polymer morphologies and simultaneously provide near-quantum accuracy in estimating dielectric properties of various polymer systems. We demonstrate the predictive power of our framework on high energy density polymer systems recently identified through rational experimental-theoretical co-design. Our scalable and automated framework may be used for high-throughput theoretical screenings of combinatorial large design space to identify next-generation high energy density polymer materials.

physics.chem-ph↗

arXiv2020

Polymers for Extreme Conditions Designed Using Syntax-Directed Variational Autoencoders

The design/discovery of new materials is highly non-trivial owing to the near-infinite possibilities of material candidates, and multiple required property/performance objectives. Thus, machine learning tools are now commonly employed to virtually screen material candidates with desired properties by learning a theoretical mapping from material-to-property space, referred to as the \emph{forward} problem. However, this approach is inefficient, and severely constrained by the candidates that human imagination can conceive. Thus, in this work on polymers, we tackle the materials discovery challenge by solving the \emph{inverse} problem: directly generating candidates that satisfy desired property/performance objectives. We utilize syntax-directed variational autoencoders (VAE) in tandem with Gaussian process regression (GPR) models to discover polymers expected to be robust under three extreme conditions: (1) high temperatures, (2) high electric field, and (3) high temperature \emph{and} high electric field, useful for critical structural, electrical and energy storage applications. This approach to learn from (and augment) human ingenuity is general, and can be extended to discover polymers with other targeted properties and performance measures.

cond-mat.soft↗

arXiv2020

Polymer Informatics: Current Status and Critical Next Steps

Artificial intelligence (AI) based approaches are beginning to impact several domains of human life, science and technology. Polymer informatics is one such domain where AI and machine learning (ML) tools are being used in the efficient development, design and discovery of polymers. Surrogate models are trained on available polymer data for instant property prediction, allowing screening of promising polymer candidates with specific target property requirements. Questions regarding synthesizability, and potential (retro)synthesis steps to create a target polymer, are being explored using statistical means. Data-driven strategies to tackle unique challenges resulting from the extraordinary chemical and physical diversity of polymers at small and large scales are being explored. Other major hurdles for polymer informatics are the lack of widespread availability of curated and organized data, and approaches to create machine-readable representations that capture not just the structure of complex polymeric situations but also synthesis and processing conditions. Methods to solve inverse problems, wherein polymer recommendations are made using advanced AI algorithms that meet application targets, are being investigated. As various parts of the burgeoning polymer informatics ecosystem mature and become integrated, efficiency improvements, accelerated discoveries and increased productivity can result. Here, we review emergent components of this polymer informatics ecosystem and discuss imminent challenges and opportunities.

cond-mat.soft↗

arXiv2020

Polymer Informatics with Multi-Task Learning

Modern data-driven tools are transforming application-specific polymer development cycles. Surrogate models that can be trained to predict the properties of new polymers are becoming commonplace. Nevertheless, these models do not utilize the full breadth of the knowledge available in datasets, which are oftentimes sparse; inherent correlations between different property datasets are disregarded. Here, we demonstrate the potency of multi-task learning approaches that exploit such inherent correlations effectively, particularly when some property dataset sizes are small. Data pertaining to 36 different properties of over $13, 000$ polymers (corresponding to over $23,000$ data points) are coalesced and supplied to deep-learning multi-task architectures. Compared to conventional single-task learning models (that are trained on individual property datasets independently), the multi-task approach is accurate, efficient, scalable, and amenable to transfer learning as more data on the same or different properties become available. Moreover, these models are interpretable. Chemical rules, that explain how certain features control trends in specific property values, emerge from the present work, paving the way for the rational design of application specific polymers meeting desired property or performance objectives.

cond-mat.mtrl-sci↗

arXiv2020

EZFF: Python Library for Multi-Objective Parameterization and Uncertainty Quantification of Interatomic Forcefields for Molecular Dynamics

Parameterization of interatomic forcefields is a necessary first step in performing molecular dynamics simulations. This is a non-trivial global optimization problem involving quantification of multiple empirical variables against one or more properties. We present EZFF, a lightweight Python library for parameterization of several types of interatomic forcefields implemented in several molecular dynamics engines against multiple objectives using genetic-algorithm-based global optimization methods. The EZFF scheme provides unique functionality such as the parameterization of hybrid forcefields composed of multiple forcefield interactions as well as built-in quantification of uncertainty in forcefield parameters and can be easily extended to other forcefield functional forms as well as MD engines.

physics.comp-ph↗

arXiv2020

Screening of Therapeutic Agents for COVID-19 using Machine Learning and Ensemble Docking Simulations

The world has witnessed unprecedented human and economic loss from the COVID-19 disease, caused by the novel coronavirus SARS-CoV-2. Extensive research is being conducted across the globe to identify therapeutic agents against the SARS-CoV-2. Here, we use a powerful and efficient computational strategy by combining machine learning (ML) based models and high-fidelity ensemble docking simulations to enable rapid screening of possible therapeutic molecules (or ligands). Our screening is based on the binding affinity to either the isolated SARS-CoV-2 S-protein at its host receptor region or to the Sprotein-human ACE2 interface complex, thereby potentially limiting and/or disrupting the host-virus interactions. We first apply our screening strategy to two drug datasets (CureFFI and DrugCentral) to identify hundreds of ligands that bind strongly to the aforementioned two systems. Candidate ligands were then validated by all atom docking simulations. The validated ML models were subsequently used to screen a large bio-molecule dataset (with nearly a million entries) to provide a rank-ordered list of ~19,000 potentially useful compounds for further validation. Overall, this work not only expands our knowledge of small-molecule treatment against COVID-19, but also provides an efficient pathway to perform high-throughput computational drug screening by combining quick ML surrogate models with expensive high-fidelity simulations, for accelerating the therapeutic cure of diseases.

q-bio.BM↗

arXiv2019

Machine Learning Models for the Lattice Thermal Conductivity Prediction of Inorganic Materials

The lattice thermal conductivity ($κ_{\rm L} $) is a critical property of thermoelectrics, thermal barrier coating materials and semiconductors. While accurate empirical measurements of $κ_{\rm L} $ are extremely challenging, it is usually approximated through computational approaches, such as semi-empirical models, Green-Kubo formalism coupled with molecular dynamics simulations, and first-principles based methods. However, these theoretical methods are not only limited in terms of their accuracy, but sometimes become computationally intractable owing to their cost. Thus, in this work, we build a machine learning (ML)-based model to accurately and instantly predict $κ_{\rm L}$ of inorganic materials, using a benchmark data set of experimentally measured $κ_{\rm L} $ of about 100 inorganic solids. We use advanced and universal feature engineering techniques along with the Gaussian process regression algorithm, and compare the performance of our ML model with past theoretical works. The trained ML model is not only helpful for rational design and screening of novel materials, but we also identify key features governing the thermal transport behavior in non-metals.

cond-mat.mtrl-sci↗

arXiv2017

Machine Learning and Materials Informatics: Recent Applications and Prospects

Propelled partly by the Materials Genome Initiative, and partly by the algorithmic developments and the resounding successes of data-driven efforts in other domains, informatics strategies are beginning to take shape within materials science. These approaches lead to surrogate machine learning models that enable rapid predictions based purely on past data rather than by direct experimentation or by computations/simulations in which fundamental equations are explicitly solved. Data-centric informatics methods are becoming useful to determine material properties that are hard to measure or compute using traditional methods--due to the cost, time or effort involved--but for which reliable data either already exists or can be generated for at least a subset of the critical cases. Predictions are typically interpolative, involving fingerprinting a material numerically first, and then following a mapping (established via a learning algorithm) between the fingerprint and the property of interest. Fingerprints may be of many types and scales, as dictated by the application domain and needs. Predictions may also be extrapolative--extending into new materials spaces--provided prediction uncertainties are properly taken into account. This article attempts to provide an overview of some of the recent successful data-driven "materials informatics" strategies undertaken in the last decade, and identifies some challenges the community is facing and those that should be overcome in the near future.

cond-mat.mtrl-sci↗

arXiv2017

Dopants Promoting Ferroelectricity in Hafnia: Insights From A Comprehensive Chemical Space Exploration

Although dopants have been extensively employed to promote ferroelectricity in hafnia films, their role in stabilizing the responsible ferroelectric non-equilibrium Pca21 phase is not well understood. In this work, using first principles computations, we investigate the influence of nearly 40 dopants on the phase stability in bulk hafnia to identify dopants that can favor formation of the polar Pca21 phase. Although no dopant was found to stabilize this polar phase as the ground state, suggesting that dopants alone cannot induce ferroelectricity in hafnia, Ca, Sr, Ba, La, Y and Gd were found to significantly lower the energy of the polar phase with respect to the equilibrium monoclinic phase. These results are consistent with the empirical measurements of large remnant polarization in hafnia films doped with these elements. Additionally, clear chemical trends of dopants with larger ionic radii and lower electronegativity favoring the polar Pca21 phase in hafnia were identified. For this polar phase, an additional bond between the dopant cation and the 2nd nearest oxygen neighbor was identified as the root-cause of these trends. Further, trivalent dopants (Y, La, and Gd) were revealed to stabilize the polar Pca21 phase at lower strains when compared to divalent dopants (Sr and Ba). Based on these insights, we predict that the lanthanide series metals, the lower half of alkaline earth metals (Ca, Sr and Ba) and Y as the most suitable dopants to promote ferroelectricity in hafnia.

cond-mat.mtrl-sci↗

arXiv2017

Ab initio Green-Kubo Approach for the Thermal Conductivity of Solids

We herein present a first-principles formulation of the Green-Kubo method that allows the accurate assessment of the non-radiative thermal conductivity of solid semiconductors and insulators in equilibrium ab initio molecular dynamics calculations. Using the virial for the nuclei, we propose a unique ab initio definition of the heat flux. Accurate size- and time convergence are achieved within moderate computational effort by a robust, asymptotically exact extrapolation scheme. We demonstrate the capabilities of the technique by investigating the thermal conductivity of extreme high and low heat conducting materials, namely diamond Si and tetragonal ZrO$_2$.

cond-mat.mtrl-sci↗

arXiv2016

Machine learning force fields: Construction, validation, and outlook

Force fields developed with machine learning methods in tandem with quantum mechanics are beginning to find merit, given their (i) low cost, (ii) accuracy, and (iii) versatility. Recently, we proposed one such approach, wherein, the vectorial force on an atom is computed directly from its environment. Here, we discuss the multi-step workflow required for their construction, which begins with generating diverse reference atomic environments and force data, choosing a numerical representation for the atomic environments, down selecting a representative training set, and lastly the learning method itself, for the case of Al. The constructed force field is then validated by simulating complex materials phenomena such as surface melting and stress-strain behavior - that truly go beyond the realm of $ab\ initio$ methods both in length and time scales. To make such force fields truly versatile an attempt to estimate the uncertainty in force predictions is put forth, allowing one to identify areas of poor performance and paving the way for their continual improvement.

cond-mat.mtrl-sci↗

arXiv2016

A study of adatom ripening on an Al (111) surface with machine learning force fields

Surface phenomena are increasingly becoming important in exploring nanoscale materials growth and characterization. Consequently, the need for atomistic based simulations is increasing. Nevertheless, relying entirely on quantum mechanical methods limits the length and time scales one can consider, resulting in an ever increasing dependence on alternative machine learning based force fields. Recently, we proposed a machine learning approach, known as AGNI, that allows fast and accurate atomic force predictions given the atom's neighborhood environment. Here, we make use of such force fields to study and characterize the nanoscale diffusion and growth processes occurring on an Al (111) surface. In particular we focus on the adatom ripening phenomena, confirming past experimental findings, wherein a low and high temperature growth regime were observed, using entirely molecular dynamics simulations.

cond-mat.mtrl-sci↗

arXiv2015

Controlling Electronic Structure Through Epitaxial Strain in ZnSe/ZnTe Nano-heterostructures

Using first-principles computations, we study the effect of epitaxial strains on electronic structure variations across ZnSe/ZnTe nano-heterostructures. Epitaxial strains of various types are modeled using pseudomorphic ZnSe/ZnTe heterostructures. We find that a wide range of band gaps (spanning the visible solar spectrum) and band offsets (0-1.5 eV) is accessible across the heterostructures in a controllable manner via reasonable levels of epitaxial strain. In addition to quantum confinement effects, strain in ZnSe/ZnTe heterostructures may thus be viewed as a powerful degree of freedom that can enable the rational design of optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2015

A learning scheme to predict atomic forces and accelerate materials simulations

The behavior of an atom in a molecule, liquid or solid is governed by the force it experiences. If the dependence of this vectorial force on the atomic chemical environment can be $learned$ efficiently with high-fidelity from benchmark reference results-using "big data" techniques, i.e., without resorting to actual functional forms-then this capability can be harnessed to enormously speed up $in \ silico$ materials simulations. The present contribution provides several examples of how such a $force$ field for Al can be used to go far beyond the length-scale and time-scale regimes accessible presently using quantum mechanical methods. It is argued that pathways are available to systematically and continuously improve the predictive capability of such a learned force field in an adaptive manner, and that this concept can be generalized to include multiple elements.

cond-mat.mtrl-sci↗

arXiv2015

Accelerated materials property predictions and design using motif-based fingerprints

Data-driven approaches are particularly useful for computational materials discovery and design as they can be used for rapidly screening over a very large number of materials, thus suggesting lead candidates for further in-depth investigations. A central challenge of such approaches is to develop a numerical representation, often referred to as a fingerprint, of the materials. Inspired by recent developments in chem-informatics, we propose a class of hierarchical motif-based topological fingerprints for materials composed of elements such as C, O, H, N, F, etc., whose coordination preferences are well understood. We show that these fingerprints, when representing either molecules or crystals, may be effectively mapped onto a variety of properties using a similarity-based learning model and hence can be used to predict relevant properties of a material, given that its fingerprint can be defined. Two simple procedures are introduced to demonstrate that the learning model can be inverted to identify the desired fingerprints and then, to reconstruct molecules which possess a set of targeted properties.

cond-mat.mtrl-sci↗

arXiv2015

Unraveling the luminescence signatures of chemical defects in polyethylene

Chemical defects in polyethylene (PE) can deleteriously downgrade its electrical properties and performance. Although these defects usually leave spectroscopic signatures in terms of characteristic luminescence peaks, it is nontrivial to make unambiguous assignments of the peaks to specific defect types. In this work, we go beyond traditional density functional theory calculations to determine defect-derived emission and absorption energies in PE. In particular, we characterize PE defect levels in terms of thermodynamic and adiabatic charge transition levels that involve total energy calculations of neutral and charged defects. Calculations are performed at several levels of theory including those involving (semi)local and hybrid electron exchange-correlation functionals, and many-body perturbation theory. With these critical elements, the calculated defect transition levels are in excellent correspondence to observed luminescence spectra of PE, thus clarifying and confirming the origins of the observed peaks. Based on this work, a prescription with a reasonable computational expense is proposed to accurately predict and assign spectroscopic signatures of defects in other organic polymers as well.

cond-mat.mtrl-sci↗

arXiv2014

Ab-Initio Molecular Dynamics Acceleration Scheme with an Adaptive Machine Learning Framework

Quantum mechanics based ab-initio molecular dynamics (MD) simulation schemes offer an accurate and direct means to monitor the time-evolution of materials. Nevertheless, the expensive and repetitive energy and force computations required in such simulations lead to significant bottlenecks. Here, we lay the foundations for such an accelerated ab-initio MD approach integrated with a machine learning framework. The proposed algorithm learns from previously visited configurations in a continuous and adaptive manner on-the-fly, and predicts (with chemical accuracy) the energies and atomic forces of a new configuration at a minuscule fraction of the time taken by conventional ab-initio methods. Key elements of this new accelerated ab-initio MD paradigm include representations of atomic configurations by numerical fingerprints, the learning algorithm, a decision engine that guides the choice of the prediction scheme, and requisite amount of ab-initio data. The performance of each aspect of the proposed scheme is critically evaluated for Al in several different chemical environments. This work can readily be extended to address non-elemental compounds, and has enormous implications beyond ab-initio MD acceleration. It can also lead to accelerated structure and property prediction schemes, and accurate force-fields.

cond-mat.mtrl-sci↗

arXiv2014

Pathways Towards Ferroelectricity in Hafnia

The question of whether one can systematically identify (previously unknown) ferroelectric phases of a given material is addressed, taking hafnia (HfO$_2$) as an example. Low free energy phases at various pressures and temperatures are identified using a first-principles based structure search algorithm. Ferroelectric phases are then recognized by exploiting group theoretical principles for the symmetry-allowed displacive transitions between non-polar and polar phases. Two orthorhombic polar phases occurring in space groups $Pca2_1$ and $Pmn2_1$ are singled out as the most viable ferroelectric phases of hafnia, as they display low free energies (relative to known non-polar phases), and substantial switchable spontaneous electric polarization. These results provide an explanation for the recently observed surprising ferroelectric behavior of hafnia, and reveal pathways for stabilizing ferroelectric phases of hafnia as well as other compounds.

cond-mat.mtrl-sci↗