arXiv subjects

Rang Liu

Publications and source records attributed to Rang Liu.

At least 37 records · Page 2Linked to original sources

arXiv2025

Sensing-Oriented Adaptive Resource Allocation Designs for OFDM-ISAC Systems

Orthogonal frequency division multiplexing - integrated sensing and communication (OFDM-ISAC) has emerged as a key enabler for future wireless networks, leveraging the widely adopted OFDM waveform to seamlessly integrate wireless communication and radar sensing within a unified framework. In this paper, we propose adaptive resource allocation strategies for OFDM-ISAC systems to achieve optimal trade-offs between diverse sensing requirements and communication quality-of-service (QoS). We first develop a comprehensive resource allocation framework for OFDM-ISAC systems, deriving closed-form expressions for key sensing performance metrics, including delay resolution, Doppler resolution, delay-Doppler peak sidelobe level (PSL), and received signal-to-noise ratio (SNR). Building on this theoretical foundation, we introduce two novel resource allocation algorithms tailored to distinct sensing objectives. The resolution-oriented algorithm aims to maximize the weighted delay-Doppler resolution while satisfying constraints on PSL, sensing SNR, communication sum-rate, and transmit power. The sidelobe-oriented algorithm focuses on minimizing delay-Doppler PSL while satisfying resolution, SNR, and communication constraints. To efficiently solve the resulting non-convex optimization problems, we develop two adaptive resource allocation algorithms based on Dinkelbach's transform and majorization-minimization (MM). Extensive simulations validate the effectiveness of the proposed sensing-oriented adaptive resource allocation strategies in enhancing resolution and sidelobe suppression. Remarkably, these strategies achieve sensing performance nearly identical to that of a radar-only scheme, which dedicates all resources to sensing. These results highlight the superior performance of the proposed methods in optimizing the trade-off between sensing and communication objectives within OFDM-ISAC systems.

eess.SP↗

arXiv2025

Joint Array Partitioning and Beamforming Designs in ISAC Systems: A Bayesian CRB Perspective

Integrated sensing and communication (ISAC) has emerged as a promising paradigm for next-generation (6G) wireless networks, unifying radar sensing and communication on a shared hardware platform. This paper proposes a dynamic array partitioning framework for monostatic ISAC systems to fully exploit available spatial degrees of freedom (DoFs) and reconfigurable antenna topologies, enhancing sensing performance in complex scenarios. We first establish a theoretical foundation for our work by deriving Bayesian Cramér-Rao bounds (BCRBs) under prior distribution constraints for heterogeneous target models, encompassing both point-like and extended targets. Building on this, we formulate a joint optimization framework for transmit beamforming and dynamic array partitioning to minimize the derived BCRBs for direction-of-arrival (DOA) estimation. The optimization problem incorporates practical constraints, including multi-user communication signal-to-interference-plus-noise ratio (SINR) requirements, transmit power budgets, and array partitioning feasibility conditions. To address the non-convexity of the problem, we develop an efficient alternating optimization algorithm combining the alternating direction method of multipliers (ADMM) with semi-definite relaxation (SDR). We also design novel maximum a posteriori (MAP) DOA estimation algorithms specifically adapted to the statistical characteristics of each target model. Extensive simulations illustrate the superiority of the proposed dynamic partitioning strategy over conventional fixed-array architectures across diverse system configurations.

eess.SP↗

arXiv2025

Low Range-Doppler Sidelobe ISAC Waveform Design: A Low-Complexity Approach

Integrated sensing and communication (ISAC) is a pivotal enabler for next-generation wireless networks. A key challenge in ISAC systems lies in designing dual-functional waveforms that can achieve satisfactory radar sensing accuracy by effectively suppressing range-Doppler sidelobes. However, existing solutions are often computationally intensive, limiting their practicality in multi-input multi-output (MIMO) orthogonal frequency division multiplexing (OFDM) ISAC deployments. This paper presents a novel low-complexity algorithm leveraging the augmented Lagrangian method (ALM) and Riemannian conjugate gradient (RCG) optimization techniques to address these challenges. The proposed algorithm achieves superior sidelobe suppression compared to state-of-the-art methods while dramatically reducing computational complexity, making it highly suitable for real-world MIMO-OFDM ISAC systems. Simulation results demonstrate that the proposed approach not only outperforms existing benchmarks in sidelobe reduction but also accelerates convergence, ensuring efficient performance across communication and sensing tasks.

eess.SP↗

arXiv2025

Distributed Distortion-Aware Beamforming Designs for Cell-Free mMIMO Systems

Cell-free massive multi-input multi-output (CF-mMIMO) systems have emerged as a promising paradigm for next-generation wireless communications, offering enhanced spectral efficiency and coverage through distributed antenna arrays. However, the non-linearity of power amplifiers (PAs) in these arrays introduce spatial distortion, which may significantly degrade system performance. This paper presents the first investigation of distortion-aware beamforming in a distributed framework tailored for CF-mMIMO systems, enabling pre-compensation for beam dispersion caused by nonlinear PA distortion. Using a third-order memoryless polynomial distortion model, the impact of the nonlinear PA on the performance of CF-mMIMO systems is firstly analyzed by evaluating the signal-to-interference-noise-and-distortion ratio (SINDR) at user equipment (UE). Then, we develop two distributed distortion-aware beamforming designs based on ring topology and star topology, respectively. In particular, the ring-topology-based fully-distributed approach reduces interconnection costs and computational complexity, while the star-topology-based partially-distributed scheme leverages the superior computation capability of the central processor to achieve improved sum-rate performance. Extensive simulations demonstrate the effectiveness of the proposed distortion-aware beamforming designs in mitigating the effect of nonlinear PA distortion, while also reducing computational complexity and backhaul information exchange in CF-mMIMO systems.

eess.SP↗

arXiv2025

Joint Waveform and Beamforming Design in RIS-ISAC Systems: A Model-Driven Learning Approach

Integrated Sensing and Communication (ISAC) has emerged as a key enabler for future wireless systems. The recently developed symbol-level precoding (SLP) technique holds significant potential for ISAC waveform design, as it leverages both temporal and spatial degrees of freedom (DoFs) to enhance multi-user communication and radar sensing capabilities. Concurrently, reconfigurable intelligent surfaces (RIS) offer additional controllable propagation paths, further amplifying interest in their application. However, previous studies have encountered substantial computational challenges due to the complexity of jointly designing SLP-based waveforms and RIS passive beamforming. In this paper, we propose a novel model-driven learning approach that jointly optimizes waveform and beamforming by unfolding the iterative alternative direction method of multipliers (ADMM) algorithm. Two joint design algorithms are developed for radar target detection and direction-of-arrival (DoA) estimation tasks in a cluttered RIS-ISAC system. While ensuring the communication quality-of-service (QoS) requirements, our objectives are: 1) to maximize the radar output signal-to-interference-plus-noise ratio (SINR) for target detection, and 2) to minimize the Cramér-Rao bound (CRB) for DoA estimation. Simulation results verify that our proposed model-driven learning algorithms achieve satisfactory communication and sensing performance, while also offering a substantial reduction in computational complexity, as reflected by the average execution time.

eess.SP↗

arXiv2025

DOA Estimation-Oriented Joint Array Partitioning and Beamforming Designs for ISAC Systems

Integrated sensing and communication has been identified as an enabling technology for forthcoming wireless networks. In an effort to achieve an improved performance trade-off between multiuser communications and radar sensing, this paper considers a dynamically-partitioned antenna array architecture for monostatic ISAC systems, in which each element of the array at the base station can function as either a transmit or receive antenna. To fully exploit the available spatial degrees of freedom for both communication and sensing functions, we jointly design the partitioning of the array between transmit and receive antennas together with the transmit beamforming in order to minimize the direction-of-arrival (DOA) estimation error, while satisfying constraints on the communication signal-to-interference-plus-noise ratio and the transmit power budget. An alternating algorithm based on Dinkelbach's transform, the alternative direction method of multipliers, and majorization-minimization is developed to solve the resulting complicated optimization problem. To reduce the computational complexity, we also present a heuristic three-step strategy that optimizes the transmit beamforming after determining the antenna partitioning. Simulation results confirm the effectiveness of the proposed algorithms in significantly reducing the DOA estimation error.

eess.SP↗

arXiv2025

Joint Space-Time Adaptive Processing and Beamforming Design for Cell-Free ISAC Systems

In this paper, we explore cooperative sensing and communication within cell-free integrated sensing and communication (ISAC) systems. Specifically, multiple transmit access points (APs) collaboratively serve multiple communication users while simultaneously illuminating a potential target, with a separate sensing AP dedicated to collecting echo signals for target detection. To improve the performance of identifying a moving target in the presence of strong interference originating from transmit APs, we employ the space-time adaptive processing (STAP) technique and jointly optimize the transmit/receive beamforming. Our goal is to maximize the radar output signal-to-interference-plus-noise ratio (SINR), subject to the communication SINR requirements and the power budget. An efficient alternating algorithm is developed to solve the resulting non-convex optimization problem. Simulations demonstrate significant performance improvements in target detection and validate the advantages of the proposed joint STAP and beamforming design for cell-free ISAC systems.

eess.SP↗

arXiv2025

SNR/CRB-Constrained Joint Beamforming and Reflection Designs for RIS-ISAC Systems

In this paper, we investigate the integration of integrated sensing and communication (ISAC) and reconfigurable intelligent surfaces (RIS) for providing wide-coverage and ultra-reliable communication and high-accuracy sensing functions. In particular, we consider an RIS-assisted ISAC system in which a multi-antenna base station (BS) simultaneously performs multi-user multi-input single-output (MU-MISO) communications and radar sensing with the assistance of an RIS. We focus on both target detection and parameter estimation performance in terms of the signal-to-noise ratio (SNR) and Cramer-Rao bound (CRB), respectively. Two optimization problems are formulated for maximizing the achievable sum-rate of the multi-user communications under an SNR constraint for target detection or a CRB constraint for parameter estimation, the transmit power budget, and the unit-modulus constraint of the RIS reflection coefficients. Efficient algorithms are developed to solve these two complicated non-convex problems. Extensive simulation results demonstrate the advantages of the proposed joint beamforming and reflection designs compared with other schemes. In addition, it is shown that more RIS reflection elements bring larger performance gains for direct-of-arrival (DoA) estimation than for target detection.

eess.SP↗

arXiv2025

Dynamic Hybrid Beamforming Designs for ELAA Near-Field Communications

Extremely large-scale antenna array (ELAA) is a key candidate technology for the sixth generation (6G) mobile networks. Nevertheless, using substantial numbers of antennas to transmit high-frequency signals in ELAA systems significantly exacerbates the near-field effect. Unfortunately, traditional hybrid beamforming schemes are highly vulnerable to ELAA near-field communications. To effectively mitigate severe near-field effect, we propose a novel dynamic hybrid beamforming architecture for ELAA systems, in which each antenna is either adaptively connected to one radio frequency (RF) chain for signal transmission or deactivated for power saving. For the case that instantaneous channel state information (CSI) is available during each channel coherence time, a real-time dynamic hybrid beamforming design is developed to maximize the achievable sum rate under the constraints of the constant modulus of phase-shifters (PSs), non-overlapping dynamic connection network and total transmit power. When instantaneous CSI cannot be easily obtained in real-time, we propose a two-timescale dynamic hybrid beamforming design, which optimizes analog beamformer in long-timescale and digital beamformer in short-timescale, with the goal of maximizing ergodic sum-rate under the same constraints. Simulation results demonstrate the advantages of the proposed dynamic hybrid beamforming architecture and the effectiveness of the developed algorithms for ELAA near-field communications.

eess.SP↗

arXiv2025

Target Detection in OFDM-ISAC Systems: A Multipath Exploitation Approach

This paper investigates the potential of multipath exploitation for enhancing target detection in orthogonal frequency division multiplexing (OFDM)-based integrated sensing and communication (ISAC) systems. The study aims to improve target detection performance by harnessing the diversity gain in the delay-Doppler domain. We propose a weighted generalized likelihood ratio test (GLRT) detector that effectively leverages the multipath propagation between the base station (BS) and the target. To further enhance detection accuracy, a joint optimization framework is developed for subcarrier power allocation at the transmitter and weight coefficients of the GLRT detector. The objective is to maximize the probability of target detection while satisfying constraints on total transmit power and the communication receiver's signal-to-noise ratio (SNR). An iterative algorithm based on the majorization-minimization (MM) method is employed to address the resulting non-convex optimization problem. Simulation results demonstrate the efficacy of the proposed algorithm and confirm the benefits of multipath exploitation for target detection in OFDM-ISAC systems under multipath-rich environments.

eess.SP↗

arXiv2025

Target Detection in ISAC Systems with Active RISs: A Multi-Perspective Observation Approach

Integrated sensing and communication (ISAC) has emerged as a transformative technology for 6G networks, enabling the seamless integration of communication and sensing functionalities. Reconfigurable intelligent surfaces (RIS), with their capability to adaptively reconfigure the radio environment, have shown significant potential in enhancing communication quality and enabling advanced cooperative sensing. This paper investigates a multi-RIS-assisted ISAC system and introduces a novel multi-perspective observation framework that leverages the diversity of multiple observation paths, each exhibiting distinct spatial, delay, and Doppler characteristics for both target and clutter. The proposed framework integrates symbol-level precoding (SLP) and space-time adaptive processing (STAP) to fully exploit the benefits of multi-perspective observations, enabling superior target-clutter separation and significantly improving detection accuracy. The objective is to jointly design the transmit waveform, reflection coefficients of multiple active RISs, and spatial-temporal receive filters to maximize the radar output signal-to-clutter-plus-noise ratio (SCNR) for target detection, while ensuring the quality-of-service (QoS) requirements of communication users. To address the resulting non-convex optimization problem, an effective iterative algorithm is developed, combining fractional programming (FP), majorization-minimization (MM), and the alternating direction method of multipliers (ADMM). Extensive simulation results validate the effectiveness of the proposed multi-perspective observation strategy, demonstrating its advantages in improving target detection performance in challenging environments.

eess.SP↗

arXiv2024

Non-Reciprocal Reconfigurable Intelligent Surfaces

In contrast to conventional RIS, the scattering matrix of a non-reciprocal RIS (NR-RIS) is non-symmetric, leading to differences in the uplink and the downlink components of NR-RIS cascaded channels. In this paper, a physically-consistent device model is proposed in which an NR-RIS is composed of multiple groups of two-port elements inter-connected by non-reciprocal devices. The resulting non-reciprocal scattering matrix is derived for various cases including two-element groups connected with isolators or gyrators, and general three-element groups connected via circulators. Signal models are given for NR-RIS operating in either reflecting-only or simultaneously transmitting and reflecting modes. The problem of NR-RIS design for non-reciprocal beamsteering is formulated for three-element circulator implementations, and numerical results confirm that non-reciprocal beamsteering can be achieved with minimal sidelobe power. We also show that our physically consistent NR-RIS architecture is effective in implementing channel reciprocity attacks, achieving similar performance to that with idealized NR-RIS models.

eess.SP↗

arXiv2024

CRB Optimization using a Parametric Scattering Model for Extended Targets in ISAC Systems

This paper presents a novel parametric scattering model (PSM) for sensing extended targets in integrated sensing and communication (ISAC) systems. The PSM addresses the limitations of traditional models by efficiently capturing the target's angular characteristics through a compact set of key parameters, including the central angle and angular spread, enabling efficient optimization. Based on the PSM, we first derive the Cramer-Rao Bound (CRB) for parameter estimation and then propose a beamforming design algorithm to minimize the CRB while meeting both communication signal-to-interference-plus-noise ratio (SINR) and power constraints. By integrating the PSM into the beamforming optimization process, the proposed framework achieves superior CRB performance while balancing the tradeoff between sensing accuracy and communication quality. Simulation results demonstrate that the PSM-based approach consistently outperforms traditional unstructured and discrete scattering models, particularly in resource-limited scenarios, highlighting its practical applicability and scalability.

eess.SP↗

arXiv2024

Active Reconfigurable Intelligent Surface Empowered Synthetic Aperture Radar Imaging

Synthetic Aperture Radar (SAR) utilizes the movement of the radar antenna over a specific area of interest to achieve higher spatial resolution imaging. In this paper, we aim to investigate the realization of SAR imaging for a stationary radar system with the assistance of active reconfigurable intelligent surface (ARIS) mounted on an unmanned aerial vehicle (UAV). As the UAV moves along the stationary trajectory, the ARIS can not only build a high-quality virtual line-of-sight (LoS) propagation path, but its mobility can also effectively create a much larger virtual aperture, which can be utilized to realize a SAR system. In this paper, we first present a range-Doppler (RD) imaging algorithm to obtain imaging results for the proposed ARIS-empowered SAR system. Then, to further improve the SAR imaging performance, we attempt to optimize the reflection coefficients of ARIS to maximize the signal-to-noise ratio (SNR) at the stationary radar receiver under the constraints of ARIS maximum power and amplification factor. An effective algorithm based on fractional programming (FP) and majorization minimization (MM) methods is developed to solve the resulting non-convex problem. Simulation results validate the effectiveness of ARIS-assisted SAR imaging and our proposed RD imaging and ARIS optimization algorithms.

cs.IR↗

arXiv2024

Symbol Level Precoding for Systems with Improper Gaussian Interference

This paper focuses on precoding design in multi-antenna systems with improper Gaussian interference (IGI), characterized by correlated real and imaginary parts. We first study block level precoding (BLP) and symbol level precoding (SLP) assuming the receivers apply a pre-whitening filter to decorrelate and normalize the IGI. We then shift to the scenario where the base station (BS) incorporates the IGI statistics in the SLP design, which allows the receivers to employ a standard detection algorithm without pre-whitenting. Finally we address the case where the channel and statistics of the IGI are unknown, and we formulate robust BLP and SLP designs that minimize the worst case performance in such settings. Interestingly, we show that for BLP, the worst-case IGI is in fact proper, while for SLP the worst case occurs when the interference signal is maximally improper, with fully correlated real and imaginary parts. Numerical results reveal the superior performance of SLP in terms of symbol error rate (SER) and energy efficiency (EE), especially for the case where there is uncertainty in the non-circularity of the jammer.

eess.SP↗

arXiv2024

A Novel Joint Angle-Range-Velocity Estimation Method for MIMO-OFDM ISAC Systems

Integrated sensing and communication (ISAC) is emerging as a key technique for next-generation wireless systems. In order to expedite the practical implementation of ISAC in pervasive mobile networks, it is crucial to have widely deployed base stations with radar sensing capabilities. Thus, the utilization of standardized multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) hardware architectures and waveforms is pivotal for realizing seamless integration of effective communication and sensing functionalities. In this paper, we introduce a novel joint angle-range-velocity estimation algorithm for MIMO-OFDM ISAC systems. This approach exclusively depends on the format of conventional MIMO-OFDM waveforms that are widely adopted in wireless communications. Specifically, the angle-range-velocity information of potential targets is jointly extracted by utilizing all the received echo signals within a coherent processing interval (CPI). The proposed joint estimation algorithm can achieve larger signal-to-noise-ratio (SNR) processing gains and higher resolution by fully exploiting the echo signals and jointly estimating the angle-range-velocity information. A theoretical analysis for maximum unambiguous range, resolution, and SNR processing gains is provided to verify the advantages of the proposed joint estimation algorithm. Finally, the results of extensive numerical experiments are presented to demonstrate that the proposed joint estimation approach can achieve significantly lower root-mean-square-error (RMSE) performance for angle/range/velocity estimation for both single- and multi-target scenarios.

eess.SP↗

arXiv2024

MIMO-OFDM ISAC Waveform Design for Range-Doppler Sidelobe Suppression

Integrated sensing and communication (ISAC) is a key enabling technique for future wireless networks owing to its efficient hardware and spectrum utilization. In this paper, we focus on dual-functional waveform design for a multi-input multi-output (MIMO) orthogonal frequency division multiplexing (OFDM) ISAC system, which is considered to be a promising solution for practical deployment. Since the dual-functional waveform carries communication information, its random nature leads to high range-Doppler sidelobes in the ambiguity function, which in turn degrades radar sensing performance. To suppress range-Doppler sidelobes, we propose a novel symbol-level precoding (SLP) based waveform design for MIMO-OFDM ISAC systems by fully exploiting the temporal degrees of freedom (DoFs). Our goal is to minimize the range-Doppler integrated sidelobe level (ISL) while satisfying the constraints of target illumination power, multi-user communication quality of service (QoS), and constant-modulus transmission. To solve the resulting non-convex waveform design problem, we develop an efficient algorithm using the majorization-minimization (MM) and alternative direction method of multipliers (ADMM) methods. Simulation results show that the proposed waveform has significantly reduced range-Doppler sidelobes compared with signals designed only for communications and other baselines. In addition, the proposed waveform design achieves target detection and estimation performance close to that achievable by waveforms designed only for radar, which demonstrates the superiority of the proposed SLP-based ISAC approach.

eess.SP↗

arXiv2024

Multipath Exploitation for Fluctuating Target Detection in RIS-Assisted ISAC Systems

Integrated sensing and communication (ISAC) systems are typically deployed in multipath environments, which is usually deemed as a challenging issue for wireless communications. However, the multipath propagation can also provide extra illumination and observation perspectives for radar sensing, which offers spatial diversity gain for detecting targets with spatial radar cross-section (RCS) fluctuations. In this letter, we propose to utilize reconfigurable intelligent surfaces (RIS) in ISAC systems to provide high-quality and controllable multipath propagation for improving the performance of fluctuating target detection and simultaneously enhancing the quality of communication services. To effectively exploit the spatial diversity offered by RIS-empowered multipath, the dual-functional transmit beamforming and the RIS reflection beamforming are jointly designed to maximize the expectation of radar signal-to-noise ratio (SNR). To solve the resulting complex non-convex optimization problem, we develop an efficient alternating optimization algorithm that utilizes majorization-minimization (MM) and alternating direction method of multipliers (ADMM) algorithms. Simulation results illustrate the advantages of multipath exploitation and the proposed beamforming design algorithm for fluctuating target detection in RIS-assisted ISAC systems.

eess.SP↗