arXiv subjects

Raphaël Galicher

Publications and source records attributed to Raphaël Galicher.

At least 19 recordsLinked to original sources

arXiv2026

First high-contrast results on THD2 testbed after infrastructure upgrade

We present the first scientific results delivered by the upgraded THD2 high-contrast imaging testbed. We report two advances enabled by its improved stability and broadband performance. First, for the Roman Space Telescope, we demonstrate that Gaussian-shaped diversity probes outperform the baseline sinc probes by reducing non-linearities, supporting higher probe amplitudes, and improving electric field estimation efficiency. These results have led to their prioritization as an enhanced early observation for Roman. Second, within ESA's SUPPPPRESS project, we test new polarization-independent Vector Vortex Coronagraphs and design them to high-contrast performance approaching 1e-10 over a 20% bandwidth. We assess their behavior in narrow- and broadband light with active focal-plane wavefront control. Together, these results show how THD2 strengthens Europe's capability in high-contrast imaging, providing a unique platform reaching contrasts of 1e-8 to 1e-9 for developing next-generation coronagraphic technologies.

astro-ph.IM↗

arXiv2026

Enhanced wavefront sensing for the Roman Coronagraph Instrument: Gaussian probes and compact model validation

The Coronagraph Instrument on the Roman Space Telescope will be the first space-based system to demonstrate closed-loop focal-plane wavefront sensing and control, a key step towards the Habitable Worlds Observatory. Beyond the baseline Hybrid Lyot Coronagraph, "enhanced modes" are being developed to improve efficiency and science yield. One such mode uses Gaussian probes for electric field estimation, extending the linear regime and allowing higher probe amplitudes. This may increase signal-to-noise, reduce exposure time, accelerate dark hole convergence, and extend operation to stars as faint as $V\sim5$. For those reasons, it was selected by the Coronagraph Community Participation Program's Hardware Working Group as the first technology demonstration carried out on Roman in early 2027. We present numerical simulations using a noise-free compact software model, which demonstrate the benefits of replacing the nominal probes with Gaussian probes.

astro-ph.IM↗

arXiv2026

CATKit2-HCI: a collaborative framework for advancing high-contrast coronagraph testbeds

High-contrast exoplanet imaging requires dedicated laboratory testbeds for the development and validation of coronagraph architectures, wavefront sensing and control methods, calibration strategies, and system-level observing concepts. These testbeds often share similar software needs, yet many tools are developed independently at each institution. The CATKit2-High-Contrast-Imaging collaboration, or CATKit2-HCI, addresses this gap by providing a shared software framework for reusable HCI infrastructure. Built on top of CATKit2, an open-source hardware control and synchronization framework originally developed for the High-contrast Imager for Complex Aperture Telescopes (HiCAT) testbed at the Space Telescope Science Institute, CATKit2-HCI provides the collaborative layer for HCI-specific algorithms, calibration tools, diagnostics, visualization, and performance metrics. The collaboration currently includes multiple coronagraph testbeds in the United States and Europe. Its goals are to reduce duplicated software development, improve code quality through shared review, enable more direct comparison of results across facilities, and facilitate the movement of students, postdoctoral researchers, and collaborators between laboratories. We describe the motivation, architecture, collaboration model, shared technical capabilities, and early cross-testbed examples of CATKit2-HCI as a framework for accelerating coronagraph technology development.

astro-ph.IM↗

arXiv2026

Coherence differential imaging using gradient-boosted decision trees for the direct detection of exoplanets

Coronagraphic imaging of exoplanets is limited by residual speckles that mimic planets. Advanced post-processing is essential for current and future instruments on the ground or in space. Current techniques are time-intensive and limited. ADI requires long sequences and is limited at small separations. RDI is also time-consuming and sensitive to speckle evolution, leading to imperfect subtraction. Coherence Differential Imaging (CDI), which we successfully demonstrated on SPHERE, offers a faster alternative by using the light incoherence between speckles and planets. However, its reliance on accurate instrumental models limits its performance. In this work, we introduce EPICX, an enhanced CDI method using gradient-boosted decision trees. EPICX models the differential signal as a high-dimensional regression problem, optimizing the discrimination between coherent speckle noise and incoherent planet signal. We validate this enhanced CDI method using simulated data for different coronagraphs, including those aboard JWST and Roman.

astro-ph.IM↗

arXiv2026

SAXO+, the second-stage adaptive optics for SPHERE: NCPA compensation and dark-hole loop with a pyramid wavefront sensor

The SAXO+ upgrade of the VLT/SPHERE adaptive optics system introduces a second-stage near-infrared pyramid wavefront sensor to improve high-contrast imaging, making accurate calibration of non-common path aberrations (NCPAs) essential to fully exploit its performance. This work refines the expected level of NCPAs in SAXO+ and presents the calibration procedures developed for static NCPA compensation and focal-plane dark-hole control. Monte Carlo simulations based on an updated Zemax optical model were used to estimate the NCPA error budget. These simulations are in good agreement with previous measurements on SPHERE and with the assumptions adopted in earlier performance studies. We also propose a calibration strategy that offloads most static aberration correction to the first-stage deformable mirror while preserving the second-stage mirror stroke for high-speed adaptive optics correction. These results validate the expected SAXO+ optical quality and establish the calibration framework required for efficient NCPA compensation and focal-plane wavefront control during future on-sky operations.

astro-ph.IM↗

arXiv2026

SUPPPPRESS: Prototyping and testing liquid-crystal vector vortex coronagraphs with reduced polarization leakage

The vortex coronagraph is one of the most promising candidates for the Habitable Worlds Observatory (HWO) due to its excellent theoretical performance for an off-axis telescope. A practical realization can be achieved using liquid-crystal polymers to form a vector vortex coronagraph (VVC). Reaching the $10^{-10}$ contrast required for Earth-like planet detection is, however, limited by polarization leakage caused by wavelength-dependent deviations from half-wave retardance. This effect can be mitigated using multi-layer twisted retarders to minimize leakage, and by combining the VVC with multiple polarization gratings (mgVVC) to diffract the polarization leakage out of the science path. We present recent progress within the ESA-funded SUPPPPRESS project, which aims to advance the manufacturing, assembly, and testing of high-performance VVCs. Central singularities of 2 and 6 $μ$m have been achieved for charge 2 and charge 6 VVCs, respectively, with patterning accuracies better than 1 degree root-mean-square error. Fabrication procedures have been developed to produce individual components with a polarization leakage of $3\times10^{-4}$ over a 10% bandwidth and $8\times10^{-4}$ over a 20% bandwidth. We also report on the development of assembly and alignment procedures for mgVVCs and their metrology. Furthermore, we present initial high-contrast tests at the THD2 bench for both regular VVCs and a double-grating VVC. The double-grating VVC reaches an average contrast between 3 and 10 $λ$/D of $2 \times 10^{-8}$ over a small bandwidth and $6\times 10^{-8}$ over a 10% bandwidth. Finally, we report on successful space-environment tests of the assembled liquid-crystal masks.

astro-ph.IM↗

arXiv2026

A practical guide to Digital Micro-mirror Devices (DMDs) for wavefront shaping

Digital micromirror devices have gained popularity in wavefront shaping, offering a high frame rate alternative to liquid crystal spatial light modulators. They are relatively inexpensive, offer high resolution, are easy to operate, and a single device can be used in a broad optical bandwidth. However, some technical drawbacks must be considered to achieve optimal performance. These issues, often undocumented by manufacturers, mostly stem from the device's original design for video projection applications. Herein, we present a guide to characterize and mitigate these effects. Our focus is on providing simple and practical solutions that can be easily incorporated into a typical wavefront shaping setup.

physics.optics↗

arXiv2025

Coherent Differential Imaging of high-contrast extended sources with VLT/SPHERE

High-contrast imaging relies on advanced coronagraphs and adaptive optics (AO) to attenuate the starlight. However, residual aberrations, especially non-common path aberrations between the AO channel and the coronagraph channel, limit the instrument performance. While post-processing techniques such as spectral or angular differential imaging (ADI) can partially address those issues, they suffer from self-subtraction and inefficiencies at small angular separations or when observations are conducted far from transit. We previously demonstrated the on-sky performance of coherent differential imaging (CDI), which offers a promising alternative. It allows for isolating coherent starlight residuals through speckle modulation, which can then be subtracted from the raw images during post-processing. This work aims to validate a CDI method on real science targets, demonstrating its effectiveness in imaging almost face-on circumstellar disks, which are typically challenging to retrieve with ADI. We temporally modulated the speckle field in VLT/SPHERE images, applying small phase offsets on the AO deformable mirror while observing stars surrounded by circumstellar material: HR 4796A, CPD-36 6759, HD 169142, and HD 163296. We hence separated the astrophysical scene from the stellar speckle field, whose lights are mutually incoherent. Combining a dozen of data frames and reference coronagraph point spread functions through a Karhunen-Loève image projection framework, we recover the circumstellar disks without the artifacts that are usually introduced by common post-processing algorithms (e.g., self-subtraction). The CDI method therefore represents a promising strategy for calibrating the effect of static and quasi-static aberrations in future direct imaging surveys. Indeed, it is efficient, does not require frequent telescope slewing, and does not introduce image artifacts to first order.

astro-ph.IM↗

arXiv2025

Extended Linearity in the High-Order Wavefront Sensor for the Roman Coronagraph

Context. The Coronagraphic Instrument (CGI) on the Roman Space Telescope aims for unprecedented contrast for direct imaging of exoplanets, serving as a critical tech demo for future missions like the Habitable Worlds Observatory. This requires advanced wavefront sensing and control (WFS&C), including pair-wise (PW) probing for electric field estimation in the focal plane. Optimizing PW probe designs is vital to enhance performance and reduce overheads. Aims. We investigate different probe designs for PW probing in the context of Roman CGI. We compare classic sinc-sinc-sine probes, previously introduced single-actuator probes, and newly proposed sharp sinc probes in terms of effectiveness in focal-plane modulation, resilience to non-linearities, and overall impact on convergence and contrast. Methods. We conducted experiments on the THD2 testbed, configured to emulate Roman CGI with a custom Hybrid Lyot Coronagraph. We evaluated the three probe designs through WFS&C experiments using PW probing for estimation and electric field conjugation for wavefront correction. Simulations and hardware tests assessed contrast convergence and the impact of non-linear terms at varying probe amplitudes. We also explored low-flux scenarios to demonstrate the use of high-amplitude probes in reducing exposure times or closing the loop on faint targets. Results. Single-actuator probes emerged as the most effective, with faster convergence and reduced non-linear effects at high amplitudes. Sharp sinc probes performed moderately well but were less robust than single actuators. High-amplitude single-actuator probes showed advantages in dark-hole digging under low-flux, through faster iterations without significant degradation in contrast. The THD2 testbed, operating at contrasts analogous to Roman CGI, validated our results and underscored its role as a critical platform for advancing WFS&C techniques.

astro-ph.IM↗

arXiv2024

Polarization effects on high contrast imaging: measurements on THD2 Bench

The spectroscopic study of mature giant planets and low mass planets (Neptune-like, Earth-like) requires instruments capable of achieving very high contrasts ($10^{-10}-10^{-11}$) at short angular separations. To achieve such high performance on a real instrument, many limitations must be overcome: complex component defects (coronagraph, deformable mirror), optical aberrations and scattering, mechanical vibrations and drifts, polarization effects, etc. To study the overall impact on a complete system representative of high contrast instruments, we have developed a test bench at Paris Observatory, called THD2. In this paper, we focus on the polarization effects that are present on the bench which creates differential aberrations between the two linear polarization states. We compare the recorded beam positions of the two polarization states with the predicted from the Goos-Hänchen and Imbert-Fedorov effects, both of which cause spatial shifts and angular deviations of the beam, longitudinal and transverse respectively. Although these effects have already been studied in the literature from the optical and quantum mechanical points of view, their measurement and impact on a complete optical bench are rather rare, although they are crucial for high-contrast instruments. After describing the Goos-Hänchen and Imbert-Fedorov effects and estimating their amplitude on the THD2 bench, we present the protocol we used to measure these effects of polarization on the light beam. We compare predictions and measurements and we conclude on the most limiting elements on our bench polarization-wise.

astro-ph.IM↗

arXiv2024

Upgrading SPHERE with the second stage AO system SAXO+: non-common path aberrations estimation and correction

SAXO+ is a planned enhancement of the existing SAXO, the VLT/ SPHERE adaptive optics system, deployed on ESO's Very Large Telescope. This upgrade is designed to significantly enhance the instrument's capacity to detect and analyze young Jupiter-like planets. The pivotal addition in SAXO+ is a second-stage adaptive optics system featuring a dedicated near-infrared pyramid wavefront sensor and a second deformable mirror. This secondary stage is strategically integrated to address any residual wavefront errors persisting after the initial correction performed by the current primary AO loop, SAXO. However, several recent studies clearly showed that in good conditions, even in the current system SAXO, non-common path aberrations (NCPAs) are the limiting factor of the final normalized intensity in focal plane, which is the final metric for ground-based high-contrast instruments. This is likely to be even more so the case with the new AO system, with which the AO residuals will be minimized. Several techniques have already been extensively tested on SPHERE in internal source and/or on-sky and will be presented in this paper. However, the use of a new type of sensor for the second stage, a pyramid wavefront sensor, will likely complicate the correction of these aberrations. Using an end-to-end AO simulation tool, we conducted simulations to gauge the effect of measured SPHERE NCPAs in the coronagraphic image on the second loop system and their correction using focal plane wavefront sensing systems. We finally analyzed how the chosen position of SAXO+ in the beam will impact the evolution of the NCPAs in the new instrument.

astro-ph.IM↗

arXiv2024

Numerical simulations for the SAXO+ upgrade: Performance analysis of the adaptive optics system

SPHERE, operating at the VLT since 2014, is currently one of the high-contrast instruments with a higher performance. Its adaptive optics system, known as SAXO, will be upgraded to SAXO+, which features the addition of a second stage of adaptive optics. This stage will use a near-infrared pyramid wavefront sensor to record images of fainter exoplanets around redder stars. In this work, we compare the performance of SAXO and SAXO+. We look for the optimal values of the key system parameters of SAXO+ for various science cases and turbulence conditions. We performed numerical simulations using COMPASS, an end-to-end adaptive optics simulation tool. We simulated perfect coronagraph images of an on-axis point source, and we minimized the residual starlight intensity between 3 and 5 $λ/D$ as a performance criterion. The explored parameter space includes science cases, turbulence conditions, and key system parameters. In every science case and turbulence condition, SAXO+ reduces the residual starlight intensity inside the correction zone of the second stage by a factor of ten compared to SAXO. The optimal first stage gain is lower for SAXO+ than for SAXO alone. We quantified the gain in performance of SAXO+ when changing the second stage frequency from 2 kHz to 3 kHz, and we conclude that 2 kHz may be sufficient for most realistic conditions. We give the optimal first stage gain as well as the first and second stage frequencies for every seeing, coherence time, and science case. Finally, we find that a 2 ${λ_{\mathrm{WFS}}}/D$ pyramid modulation radius is a good trade-off between performance and robustness against varying turbulence conditions. This study shows that the future SAXO+ system will outperform the current SAXO system in all studied cases.

astro-ph.IM↗

arXiv2023

SAXO+ upgrade : second stage AO system end-to-end numerical simulations

SAXO+ is a proposed upgrade to SAXO, the AO system of the SPHERE instrument on the ESO Very Large Telescope. It will improve the capabilities of the instrument for the detection and characterization of young giant planets. It includes a second stage adaptive optics system composed of a dedicated near-infrared wavefront sensor and a deformable mirror. This second stage will remove the residual wavefront errors left by the current primary AO loop (SAXO). This paper focuses on the numerical simulations of the second stage (SAXO+) and concludes on the impact of the main AO parameters used to build the design strategy. Using an end-to-end AO simulation tool (COMPASS), we investigate the impact of several parameters on the performance of the AO system. We measure the performance in minimizing the star residuals in the coronagraphic image. The parameters that we study are : the second stage frequency, the photon flux on each WFS, the first stage gain and the DM number of actuators of the second stage. We show that the performance is improved by a factor 10 with respect to the current AO system (SAXO). The optimal second stage frequency is between 1 and 2 kHz under good observing conditions. In a red star case, the best SAXO+ performance is achieved with a low first stage gain of 0.05, which reduces the first stage rejection.

astro-ph.IM↗

arXiv2023

The first scattered light images of HD 112810, a faint debris disk in the Sco-Cen association

Context: Circumstellar debris disks provide insight into the formation and early evolution of planetary systems. Resolved belts in particular help to locate planetesimals in exosystems, and can hint at the presence of disk-sculpting exoplanets. Aims: We study the circumstellar environment of HD 112810 (HIP 63439), a mid-F type star in the Sco-Cen association with a significant infrared excess indicating the presence of a circumstellar debris disk. Methods: We collected five high-contrast observations of HD 112810 with VLT/SPHERE. We identified a debris disk in scattered light, and found that the debris signature is robust over a number of epochs and a variety of reduction techniques. We modelled the disk, accounting for self-subtraction and assuming that it is optically thin. Results: We find a single-belt debris disk, with a radius of 118$\pm$9au and an inclination angle of ${75.7}^{+1.1}_{-1.3}$$°$. This is in good agreement with the constraints from SED modelling and from a partially-resolved ALMA image of the system. No planets are detected, though planets below the detection limit ($\sim$2.6M$_\textrm{J}$ at a projected separation of 118au) could be present and could have contributed to sculpting the ring of debris. Conclusions: HD 112810 adds to the growing inventory of debris disks imaged in scattered light. The disk is faint, but the radius and the inclination of the disk are promising for follow-up studies of the dust properties.

astro-ph.EP↗

arXiv2023

Imaging exoplanets with coronagraphic instruments

Exoplanetary science is a very active field of astronomy nowadays, with questions still opened such as how planetary systems form and evolve (occurrence, process), why such a diversity of exoplanets is observed (mass, radius, orbital parameters, temperature, composition), and what are the interactions between planets, circumstellar disk and their host star. Several complementary methods are used for the detection of exoplanets. Among these, imaging aims at the direct detection of the light reflected, scattered or emitted by exoplanets and circumstellar disks. This allows their spectral and polarimetric characterization. Such imaging remains challenging because of the large luminosity ratio (1e4-1e10$) and the small angular separation (fraction of an arcsecond) between the star and its environment. Over the past two decades, numerous techniques, including coronagraphy, have been developed to make exoplanet imaging a reality. This review gives a broad overview of the subsystems that make up a coronagraphic instrument for imaging exoplanetary systems. It is especially intended for non-specialists or newcomers in the field. We explain the principle of coronagraphy and propose a formalism to understand their behavior. We discuss the impact of wavefront aberrations on the performance of coronagraphs and how they induce stellar speckles in the scientific image. Finally, we present instrumental and signal processing techniques used for on-sky minimization or a posteriori calibration of these speckles in order to improve the performance of coronagraphs.

astro-ph.EP↗

arXiv2020

Analytical model-based analysis of long-exposure images fromground-based telescopes

The search for Earth-like exoplanets requires high-contrast and high-angular resolution instruments, which designs can be very complex: they need an adaptive optics system to compensate for the effect of the atmospheric turbulence on image quality and a coronagraph to reduce the starlight and enable the companion imaging. During the instrument design phase and the error budget process, studies of performance as a function of optical errors are needed and require multiple end-to-end numerical simulations of wavefront errors through the optical system. In particular, the detailed analysis of long-exposure images enables to evaluate the image quality (photon noise level, impact of optical aberrations and of adaptive optics residuals, etc.). Nowadays simulating one long but finite exposure image means drawing several thousands of random frozen phase screens, simulating the image associated with each of them after propagation through the imaging instrument, and averaging all the images. Such a process is time consuming, demands a great deal of computer resources, and limits the number of parametric optimization. We propose an alternative and innovative method to directly express the statistics of ground-based images for long but finite exposure times. It is based on an analytical model, which only requires the statistical properties of the atmospheric turbulence. Such a method can be applied to optimize the design of future instruments such as SPHERE+ (VLT) or the planetary camera and spectrograph (PCS - ELT) or any ground-based instrument.

astro-ph.IM↗

arXiv2020

Increasing the raw contrast of VLT/SPHERE with the dark hole technique. I. Simulations and validation on the internal source

Context. Since 1995 and the first discovery of an exoplanet orbiting a main-sequence star, 4000 exoplanets have been discovered using several techniques. However, only a few of these exoplanets were detected through direct imaging. Indeed, the imaging of circumstellar environments requires high-contrast imaging facilities and accurate control of wavefront aberrations. Ground-based planet imagers such as VLT/SPHERE or Gemini/GPI have already demonstrated great performance. However, their limit of detection is hampered by suboptimal correction of aberrations unseen by adaptive optics (AO). Aims. Instead of focusing on the phase minimization of the pupil plane as in standard AO, we aim to directly minimize the stellar residual light in the SPHERE science camera behind the coronagraph to improve the contrast as close as possible to the inner working angle. Methods. We propose a dark hole (DH) strategy optimized for SPHERE. We used a numerical simulation to predict the global improvement of such a strategy on the overall performance of the instrument for different AO capabilities and particularly in the context of a SPHERE upgrade. Then, we tested our algorithm on the internal source with the AO in closed loop. Results. We demonstrate that our DH strategy can correct for aberrations of phase and amplitude. Moreover, this approach has the ability to strongly reduce the diffraction pattern induced by the telescope pupil and the coronagraph, unlike methods operating at the pupil plane. Our strategy enables us to reach a contrast of 5e-7 at 150 mas from the optical axis in a few minutes using the SPHERE internal source. This experiment establishes the grounds for implementing the algorithm on sky in the near future.

astro-ph.IM↗

arXiv2020

Comparing focal plane wavefront control techniques:\\Numerical simulations and laboratory experiments

Fewer than 1% of all exoplanets detected to date have been characterized on the basis of spectroscopic observations of their atmosphere. Unlike indirect methods, high-contrast imaging offers access to atmospheric signatures by separating the light of a faint off-axis source from that of its parent star. Forthcoming space facilities, such as WFIRST/LUVOIR/HabEX, are expected to use coronagraphic instruments capable of imaging and spectroscopy in order to understand the physical properties of remote worlds. The primary technological challenge that drives the design of these instruments involves the precision control of wavefront phase and amplitude errors. Several FPWS and control techniques have been proposed and demonstrated in laboratory to achieve the required accuracy. However, these techniques have never been tested and compared under the same laboratory conditions. This paper compares two of these techniques in a closed loop in visible light: the pair-wise (PW) associated with electric field conjugation (EFC) and self-coherent camera (SCC). We first ran numerical simulations to optimize PW wavefront sensing and to predict the performance of a coronagraphic instrument with PW associated to EFC wavefront control, assuming modeling errors for both PW and EFC. Then we implemented the techniques on a laboratory testbed. We introduced known aberrations into the system and compared the wavefront sensing using both PW and SCC. The speckle intensity in the coronagraphic image was then minimized using PW+EFC and SCC independently. We demonstrate that both SCC and PW+EFC can generate a dark hole in space-like conditions in a few iterations. Both techniques reach the current limitation of our laboratory bench and provide coronagraphic contrast levels of 5e-9 in a narrow spectral band (<0.25% bandwidth)

astro-ph.IM↗