arXiv subjects

Rashmi Sudiwala

Publications and source records attributed to Rashmi Sudiwala.

7 recordsLinked to original sources

arXiv2026

BICEP/Keck XXI: Constraints on Early-Universe Parity Violation from Multipole-Dependent Birefringence

We present the first constraints on multipole-dependent cosmic birefringence using CMB polarization data from the BK18 dataset, which combines observations from BICEP2, Keck Array, and BICEP3 at frequencies of 95, 150, and 220 GHz. Photon coupling to an axion-like field leads to the rotation of CMB polarization, inducing non-zero EB cross-correlations. We show that a multipole-dependent rotation beta(l) imprints a distinct signature in the polarization spectra that can be constrained. Specifically, we consider an Early Dark Energy (EDE) scenario in which a pseudoscalar field couples to photons through a Chern-Simons interaction, generating a polarization rotation with multipole dependence. We introduce a phenomenological beta(l) as a step function, obtaining constraints on the step function size consistent with zero, with uncertainties less than 0.15 degrees (68% CL). In addition, using multi-frequency EE, BB, and EB cross-spectra, along with robust BICEP/Keck foreground treatment and likelihood framework, we derive constraints on the axion-photon coupling amplitude g for several choices of EDE parameters. For the baseline best-fit value f_{EDE} = 0.087 from the Planck 2018 analysis, we obtain g = 0.11 +/- 0.37 (68% CL), consistent with previous limits.

astro-ph.CO↗

arXiv2025

A metamaterial telescope at millimetre wavelengths

In this paper we present a novel telescope composed exclusively of thin, flat optical elements, each being a hot-pressed multi-layered structure combining the properties of a lens, its anti-reflection coating and frequency selection or filtering. We discuss the design process, from fundamental physical metamaterial properties of the single periodic cell structure to the lens concept, which constitutes the building block of the telescope design, and the iterative process that is part of the lens optimization. We provide the results of a laboratory test campaign for different telescope designs based on three-lens arrangements. Beam cuts and focus measurements both on- and off-axis are compared with models showing good agreement. We conclude that a broad-band mm-wave complete telescope system consisting entirely of metamaterial flat lenses has been built and tested, showing comparable performance with conventional state-of-the-art refractive telescopes in the same wavelength region. This new broadband design, highly efficient at frequencies between 90 and 190 GHz, offers multiple advantages. These include a $> 80\%$ weight reduction, reduced issues tied to coating-survivability at cryogenic temperatures caused by differential contraction exacerbated by non-flat surfaces, as well as a reduction in the overall number of components and mechanical mounts.

astro-ph.IM↗

arXiv2024

Calibration Measurements of the BICEP3 and BICEP Array CMB Polarimeters from 2017 to 2024

The BICEP3 and BICEP Array polarimeters are small-aperture refracting telescopes located at the South Pole designed to measure primordial gravitational wave signatures in the Cosmic Microwave Background (CMB) polarization, predicted by inflation. Constraining the inflationary signal requires not only excellent sensitivity, but also careful control of instrumental systematics. Both instruments use antenna-coupled orthogonally polarized detector pairs, and the polarized sky signal is reconstructed by taking the difference in each detector pair. As a result, the differential response between detectors within a pair becomes an important systematic effect we must control. Additionally, mapping the intensity and polarization response in regions away from the main beam can inform how sidelobe levels affect CMB measurements. Extensive calibration measurements are taken in situ every austral summer for control of instrumental systematics and instrument characterisation. In this work, we detail the set of beam calibration measurements that we conduct on the BICEP receivers, from deep measurements of main beam response to polarized beam response and sidelobe mapping. We discuss the impact of these measurements for instrumental systematics studies and design choices for future CMB receivers.

astro-ph.CO↗

arXiv2021

Plastic Laminate Antireflective Coatings for Millimeter-wave Optics in BICEP Array

The BICEP/Keck series of experiments target the Cosmic Microwave Background at degree-scale resolution from the South Pole. Over the next few years, the "Stage-3" BICEP Array (BA) telescope will improve the program's frequency coverage and sensitivity to primordial B-mode polarization by an order of magnitude. The first receiver in the array, BA1, began observing at 30/40 GHz in early 2020. The next two receivers, BA2 and BA3, are currently being assembled and will map the southern sky at frequencies ranging from 95 GHz to 150 GHz. Common to all BA receivers is a refractive, on-axis, cryogenic optical design that focuses microwave radiation onto a focal plane populated with antenna-coupled bolometers. High-performance antireflective coatings up to 760 mm in aperture are needed for each element in the optical chain, and must withstand repeated thermal cycles down to 4 K. Here we present the design and fabrication of the 30/40 GHz anti-reflection coatings for the recently deployed BA1 receiver, then discuss laboratory measurements of their reflectance. We review the lamination method for these single- and dual-layer plastic coatings with indices matched to various polyethylene, nylon and alumina optics. We also describe ongoing efforts to optimize coatings for the next BA cryostats, which may inform technological choices for future Small-Aperture Telescopes of the CMB "Stage 4" experiment.

astro-ph.IM↗

arXiv2020

Characterising the optical response of ultra-low-noise far-infrared 60-110 $μ$m transition edge sensors

Far-infrared Transition Edge Sensors (TESs) are being developed for the SAFARI grating spectrometer on the cooled-aperture space telescope SPICA. In support of this work, we have devised a cryogenic (90 mK) test facility for carrying out precision optical measurements on ultra-low-noise TESs. Although our facility is suitable for the whole of the SAFARI wavelength range, 34-230 $μ$m, we focus on a representative set of measurements at 60-110 $μ$m using a device having a Noise Equivalent Power (NEP) of 0.32 $\mathrm{aW/\sqrt{Hz}}$. The system is able to perform a range of measurements: (i) Dark electrical characterisation. (ii) Optical efficiency with respect to a partially coherent beam having a modal composition identical to that of an ideal imaging telescope. (iii) Optical saturation and dynamic range. (iv) Fast optical transient response to a modulated thermal source. (v) Optical transient response in the presence of high-level background loading. We describe dark measurements to determine the operating characteristics of a TES, and then compare predicted optical behaviour with measured optical behaviour. By comparing electrical and optical transient response, we were able to observe thermalisation in the device. We comment on the challenge of eliminating stray light.

physics.ins-det↗

arXiv2016

Student project: Of spinning coins and merging black holes

For the past decade, the SAIL labs at the University of Sydney have been challenging students with short research projects that elucidate basic principles of physics. These include the development of instruments launched on cubesats, balloons, on telescopes or placed out in the field. This experiment is inspired by the spectacular 2015 discovery of merging black holes with the Laser Interferometric Gravitational-Wave Observatory (LIGO). Students are profoundly inspired by LIGO, and for good reason, but it is challenging to construct a table top demonstration of a gravitational wave observatory. Instead we consider chirps which are remarkable transient phenomena in nature involving both frequency and amplitude modulation, as we can demonstrate with a spinning coin. In the case of the LIGO event, orbital energy is being released as gravitational radiation; for the spinning coin, its spin/orbit energy is being released dissipatively (sound, heat, air viscosity). Our experiment involves a simple device to spin a coin remotely. This aids repeatability and allows us to spin the coin within a vacuum chamber to examine the contribution of air viscosity.

astro-ph.IM↗

arXiv2015

A passive THz video camera based on lumped element kinetic inductance detectors

We have developed a passive 350 GHz (850 μm) video-camera to demonstrate lumped element kinetic inductance detectors (LEKIDs) -- designed originally for far-infrared astronomy -- as an option for general purpose terrestrial terahertz imaging applications. The camera currently operates at a quasi-video frame rate of 2 Hz with a noise equivalent temperature difference per frame of $\sim$0.1 K, which is close to the background limit. The 152 element superconducting LEKID array is fabricated from a simple 40 nm aluminum film on a silicon dielectric substrate and is read out through a single microwave feedline with a cryogenic low noise amplifier and room temperature frequency domain multiplexing electronics.

physics.ins-det↗