arXiv subjects

Rasoul Alaee

Publications and source records attributed to Rasoul Alaee.

At least 19 recordsLinked to original sources

arXiv2024

Ultra-directional and high-efficiency $μ$LEDs via gradient index filled micro-Horn collimators

Micro-LEDs ($μ$LEDs) are poised to transform AR/VR, display, and optical communication technologies, but they are currently hindered by low light extraction efficiency and non-directional emission. Our study introduces an innovative approach using a descending index multilayer anti-reflection coating combined with a horn collimator structure atop the $μ$LED pixel. This design leverages the propagation of light outside the critical angle to enhance both the directionality and extraction efficiency of emitted light. By implementing either discrete or continuous refractive index gradients within the horn, we achieve a dramatic tenfold increase in light extraction within a $\pm$15$^\circ$ cone, with an overall light extraction efficiency reaching approximately 80%, where 31% of the power is concentrated within this narrow cone. This performance surpasses that of an optimized SiO2 half-ellipsoidal lens, which diameter and height is 24X and 26X larger than the pixel width respectively, while our design only slightly increases the device height and expands the final light escape surface to 3 times and roughly 4 times the pixel width respectively. Such efficiency, directionality enhancement, and compactness make this solution particularly suitable for high-resolution, densely packed $μ$LED arrays, promising advancements in high-performance, miniaturized display systems.

physics.optics↗

arXiv2023

Dynamic Control of Spontaneous Emission Using Magnetized InSb Higher-Order-Mode Antennas

We exploit InSb's magnetic-induced optical properties to propose THz sub-wavelength antenna designs that actively tune the radiative decay rates of dipole emitters at their proximity. The proposed designs include a spherical InSb antenna and a cylindrical Si-InSb hybrid antenna that demonstrate distinct behaviors; the former dramatically enhances both radiative and non-radiative decay rates in the epsilon-near-zero region due to the dominant contribution of the Zeeman splitting electric octupole mode. The latter realizes significant radiative decay rate enhancement via magnetic octupole mode, mitigating the quenching process and accelerating the photon production rate. A deep learning-based optimization of emitter positioning further enhances the quantum efficiency of the proposed hybrid system. These novel mechanisms are potentially promising for tunable THz single-photon sources in integrated quantum networks.

quant-ph↗

arXiv2023

Merging automatic differentiation and the adjoint method for photonic inverse design

Optimizing shapes and topology of physical devices is crucial for both scientific and technological advancements, given its wide-ranging implications across numerous industries and research areas. Innovations in shape and topology optimization have been seen across a wide range of fields, notably structural mechanics, fluid mechanics, and photonics. Gradient-based inverse design techniques have been particularly successful for photonic and optical problems, resulting in integrated, miniaturized hardware that has set new standards in device performance. To calculate the gradients, there are typically two approaches: implementing specialized solvers using automatic differentiation or deriving analytical solutions for gradient calculation and adjoint sources by hand. In this work, we propose a middle ground and present a hybrid approach that leverages and enables the benefits of automatic differentiation and machine learning frameworks for handling gradient derivation while using existing, proven solvers for numerical solutions. Utilizing the adjoint method, we turn existing numerical solvers differentiable and seamlessly integrate them into an automatic differentiation framework. Further, this enables users to integrate the optimization environment with machine learning applications which could lead to better photonic design workflows. We illustrate the approach through two distinct examples: optimizing the Purcell factor of a magnetic dipole in the vicinity of an optical nanocavity and enhancing the light extraction efficiency of a {\textmu}LED.

physics.comp-ph↗

arXiv2021

Fourier-Engineered Plasmonic Lattice Resonances

Resonances in optical systems are useful for many applications, such as frequency comb generation, optical filtering, and biosensing. However, many of these applications are difficult to implement in optical metasurfaces because traditional approaches for designing multi-resonant nanostructures require significant computational and fabrication efforts. To address this challenge, we introduce the concept of Fourier lattice resonances (FLRs) in which multiple desired resonances can be chosen a priori and used to dictate the metasurface design. Because each resonance is supported by a distinct surface lattice mode, each can have a high quality factor. Here, we experimentally demonstrate several metasurfaces with arbitrarily placed resonances (e.g., at 1310 and 1550 nm) and Q-factors as high as 800 in a plasmonic platform. This flexible procedure requires only the computation of a single Fourier transform for its design, and is based on standard lithographic fabrication methods, allowing one to design and fabricate a metasurface to fit any specific, optical-cavity-based application. This work represents an important milestone towards the complete control over the transmission spectrum of a metasurface.

physics.optics↗

arXiv2021

A Comprehensive Multipolar Theory for Periodic Metasurfaces

Optical metasurfaces consist of a 2D arrangement of scatterers, and they control the amplitude, phase, and polarization of an incidence field on demand. Optical metasurfaces are the cornerstone for a future generation of flat optical devices in a wide range of applications. The rapidly growing advances in nanofabrication have made the versatile design and analysis of these ultra-thin surfaces an ever-growing necessity. However, despite their importance, a comprehensive theory to describe the optical response of periodic metasurfaces in closed-form and analytical expressions has not been formulated, and prior attempts were frequently approximate. Here, we develop a theory that analytically links the properties of the scatterer, from which a periodic metasurface is made, to its optical response via the lattice coupling matrix. The scatterers are represented by their polarizability or T matrix, and our theory works for normal and oblique incidence. We provide explicit expressions for the optical response up to octupolar order in both spherical and Cartesian coordinates. Several examples demonstrate that our analytical tool constitutes a paradigm shift in designing and understanding optical metasurfaces. Novel fully-diffracting metagratings and particle-independent polarization filters are proposed, and novel insights into the response of Huygens' metasurfaces under oblique incidence are provided. Our analytical expressions are a powerful tool for exploring the physics of metasurfaces and designing novel flat optics devices.

physics.optics↗

arXiv2021

Giant asymmetric second-harmonic generation in bianisotropic metasurfaces based on bound states in the continuum

Bianisotropy is a powerful concept enabling asymmetric optical response, including asymmetric reflection, absorption, optical forces, light trapping, and lasing. The physical origin of these asymmetric effects can be understood from magnetoelectric coupling and asymmetrical field enhancement. Here, we theoretically propose highly asymmetric second-harmonic generation (SHG) in bianisotropic AlGaAs metasurfaces. We show that around four orders of magnitude second-harmonic power difference for the forward and backward illuminations can be obtained by altering geometrical parameters that coincide with quasi-bound states in the continuum. Our study paves the way towards a directional generation of higher-order waves and can be potentially useful for nonlinear holograms.

physics.optics↗

arXiv2021

Selective Excitation of Subwavelength Atomic Clouds

A dense cloud of atoms with randomly changing positions exhibits coherent and incoherent scattering. We show that an atomic cloud of subwavelength dimensions can be modeled as a single scatterer where both coherent and incoherent components of the scattered photons can be fully explained based on effective multipole moments. This model allows us to arrive at a relation between the coherent and incoherent components of scattering based on the conservation of energy. Furthermore, using superposition of four plane waves, we show that one can selectively excite different multipole moments and thus tailor the scattering of the atomic cloud to control the cooperative shift, resonance linewidth, and the radiation pattern. Our approach provides a new insight into the scattering phenomena in atomic ensembles and opens a pathway towards controlling scattering for applications such as generation and manipulation of single-photon states.

quant-ph↗

arXiv2020

Kelvin's Chirality of Optical Beams

Geometrical chirality is a property of objects that describes three-dimensional mirror-symmetry violation and therefore it requires a non-vanishing spatial extent. In contrary, optical chirality describes only the local handedness of electromagnetic fields and neglects the spatial geometrical structure of optical beams. In this manuscript, we put forward the physical significance of geometrical chirality of spatial structure of optical beams, which we term "Kelvin's chirality". Further, we report on an experiment revealing the coupling of Kelvin's chirality to optical chirality upon transmission of a focused beam through a planar medium. Our work emphasizes the importance of Kelvin's chirality in all light-matter interaction experiments involving structured light beams with spatially inhomogeneous phase and polarization distributions.

physics.optics↗

arXiv2020

Superscattering, Superabsorption, and Nonreciprocity in Nonlinear Antennas

We propose tunable nonlinear antennas based on an epsilon-near-zero material with a large optical nonlinearity. We show that the absorption and scattering cross sections of the antennas can be controlled dynamically from a nearly superscatterer to a nearly superabsorber by changing the intensity of the laser beam. Moreover, we demonstrate that a hybrid nonlinear antenna, composed of epsilon-near-zero and high-index dielectric materials, exhibits nonreciprocal radiation patterns because of broken spatial inversion symmetry and large optical nonlinearity of the epsilon-near-zero material. By changing the intensity of the laser, the radiation pattern of the antenna can be tuned between a bidirectional and a unidirectional emission known as a Huygens source. Our study provides a novel approach toward ultrafast dynamical control of metamaterials, for applications such as beam steering and optical limiting.

physics.optics↗

arXiv2020

Kerker Effect, Superscattering, and Scattering Dark State in Atomic Antennas

We study scattering phenomena such as the Kerker effect, superscattering, and scattering dark states in a subwavelength atomic antenna consisting of atoms with only electric dipole transitions. We show that an atomic antenna can exhibit arbitrarily large or small scattering cross sections depending on the geometry of the structure and the direction of the impinging light. We also demonstrate that atoms with only an electric dipole transition can exhibit a directional radiation pattern with zero backscattering when placed in a certain configuration. This is a special case of a phenomenon known as the Kerker effect, which typically occurs in the presence of both electric and magnetic transitions. Our findings open a pathway to design highly directional emitters, nonradiating sources, and highly scattering objects based on individually controlled atoms.

physics.optics↗

arXiv2020

Dynamic coherent perfect absorption in nonlinear metasurfaces

We propose a tunable coherent perfect absorber based on ultrathin nonlinear metasurfaces. The nonlinear metasurface is made of plasmonic nanoantennas coupled to an epsilon-near-zero material with a large optical nonlinearity. The coherent perfect absorption is achieved by controlling the relative phases of the input beams. We show that the optical response of the nonlinear metasurface can be tuned from a complete to a partial absorption by changing the intensity of the pump beam. The proposed nonlinear metasurface can be used to design optically tunable thermal emitters, modulators, and sensors.

physics.optics↗

arXiv2020

Ultrafast Topological Engineering in Metamaterials

Transient optical heating provides an efficient way to trigger phase transitions in naturally occurring media through ultrashort laser pulse irradiation. A similar approach could be used to induce topological phase transitions in the photonic response of suitably engineered artificial structures known as metamaterials. Here, we predict a topological transition in the isofrequency dispersion contours of a layered graphene metamaterial under optical pumping. We show that the contour topology transforms from elliptic to hyperbolic within a subpicosecond timescale by exploiting the extraordinary photothermal properties of graphene. This new phenomenon allows us to theoretically demonstrate applications in engineering the decay rate of proximal optical emitters, ultrafast beam steering, and dynamical far-field subwavelength imaging. Our study opens a disruptive approach toward ultrafast control of light emission, beam steering, and optical image processing.

cond-mat.mes-hall↗

arXiv2020

Quantum metamaterials with magnetic response at optical frequencies

We propose novel quantum antennas and metamaterials with strong magnetic response at optical frequencies. Our design is based on the arrangement of natural atoms with only electric dipole transition moments at distances smaller than a wavelength of light but much larger than their physical size. In particular, we show that an atomic dimer can serve as a magnetic antenna at its antisymmetric mode to enhance the decay rate of a magnetic transition in its vicinity by several orders of magnitude. Furthermore, we study metasurfaces composed of atomic bilayers with and without cavities and show that they can fully reflect the electric and magnetic fields of light, thus, forming nearly perfect electric/magnetic mirrors. The proposed quantum metamaterials can be fabricated with available state-of-the-art technologies and promise several applications both in classical optics and quantum engineering.

physics.optics↗

arXiv2018

Theory of optical forces on small particles by multiple plane waves

We theoretically investigate the optical force exerted on an isotropic particle illuminated by a superposition of plane waves. We derive explicit analytical expressions for the exerted force up to quadrupolar polarizabilities. Based on these analytical expressions, we demonstrate that an illumination consisting of two tilted plane waves can provide a full control on the optical force. In particular, optical pulling, pushing and lateral forces can be obtained by the proper tuning of illumination parameters. Our findings might unlock multiple applications based on a deterministic control of the spatial motion of small particles.

physics.optics↗

arXiv2017

Theory of metasurface based perfect absorbers

Based on an analytic approach, we present a theoretical review on the absorption, scattering, and extinction of both dipole scatterers and regular arrays composed of such scatterers i.e., metasurfaces. Besides offering a tutorial by outlining the maximum absorption limit for electrically/magnetically resonant dipole particles/metasurfaces, we give an educative analytical approach to their analysis. Moreover, we put forward the analysis of two known alternatives in providing perfect absorbers out of electrically and or magnetically resonant metasurfaces; one is based on the simultaneous presence of both electric and magnetic responses in so called Huygens metasurfaces while the other is established upon the presence of a back reflector in so called Salisbury absorbers. Our work is supported by several numerical examples to clarify the discussions in each stage.

physics.optics↗

arXiv2017

Optical Force and Torque on Dipolar Dual Chiral Particles

On the one hand, electromagnetic dual particles preserve the helicity of light upon interaction. On the other hand, chiral particles respond differently to light of opposite helicity. These two properties on their own constitute a source of fascination. Their combined action, however, is less explored. Here, we study on analytical grounds the force and torque as well as the optical cross sections of dual chiral particles in the dipolar approximation exerted by a particular wave of well-defined helicity: A circularly polarized plane wave. We put emphasis on particles that possess a maximally electromagnetic chiral and hence dual response. Besides the analytical insights, we also investigate the exerted optical force and torque on a real particle at the example of a metallic helix that is designed to approach the maximal electromagnetic chirality condition. Various applications in the context of optical sorting but also nanorobotics can be foreseen considering the particles studied in this contribution.

physics.optics↗

arXiv2017

Fundamental Limits of Optical Force and Torque

Optical force and torque provide unprecedented control on the spatial motion of small particles. A valid scientific question, that has many practical implications, concerns the existence of fundamental upper bounds for the achievable force and torque exerted by a plane wave illumination with a given intensity. Here, while studying isotropic particles, we show that different light-matter interaction channels contribute to the exerted force and torque; and analytically derive upper bounds for each of the contributions. Specific examples for particles that achieve those upper bounds are provided. We study how and to which extent different contributions can add up to result in the maximum optical force and torque. Our insights are important for applications ranging from molecular sorting, particle manipulation, nanorobotics up to ambitious projects such as laser-propelled spaceships.

physics.optics↗

arXiv2016

Optically assisted trapping with high-permittivity dielectric rings: Towards optical aerosol filtration

Controlling the transport, trapping, and filtering of nanoparticles is important for many applications. By virtue of their weak response to gravity and their thermal motion, various physical mechanisms can be exploited for such operations on nanoparticles. However, the manipulation based on optical forces is potentially most appealing since it constitutes a highly deterministic approach. Plasmonic nanostructures have been suggested for this purpose, but they possess the disadvantages of locally generating heat and trapping the nanoparticles directly on surface. Here, we propose the use of dielectric rings made of high permittivity materials for trapping nanoparticles. Thanks to their ability to strongly localize the field in space, nanoparticles can be trapped without contact. We use a semi-analytical method to study the ability of these rings to trap nanoparticles. Results are supported by full-wave simulations. Application of the trapping concept to nanoparticle filtration is suggested.

cond-mat.mtrl-sci↗