arXiv subjects

Reiner Volkmer

Publications and source records attributed to Reiner Volkmer.

8 recordsLinked to original sources

arXiv2026

Sunrise III: Instrument, mission, data, and first results

Sunrise III is a stratospheric balloon-borne solar observatory with a 1-m diameter telescope and three post-focus instruments, along with an image stabilisation system, all within a protective gondola. It samples the lower solar atmosphere, from the solar surface to the middle chromosphere, at a resolution approaching 50~km on the Sun. Sunrise III flew successfully for 6.5 days suspended from a zero-pressure stratospheric balloon from northern Sweden to north-western Canada in July 2024, gathering around 200 TB of data. The present issue of ApJL focuses on the first scientific results from the data collected during that flight. This paper introduces this Focus Issue, providing a very brief overview of the capabilities of the instrumentation, the flight and of the gathered data. Challenges for the measurements, data reduction and interpretation are also briefly touched upon. The paper ends with an overview of the first set of science results obtained from these data, as presented in the current Focus Issue.

astro-ph.SR↗

arXiv2026

Sunrise III: The Wavefront Correction System

This paper describes the wave-front correction and image stabilisation system (CWS) developed for the Sunrise III balloon-borne telescope, and provides information about its performance as measured during the integration into the telescope and during the 2024 science flight. The fast image stabilisation is done by a correlation tracker (CT) and a fast tip-tilt mirror, low order aberrations such as defocus and coma are measured by a six-element Shack-Hartmann wavefront sensor (WFS) and corrected by an active telescope secondary mirror for automated focus and manual coma correction. The CWS is specified to deliver a stabilised image with a precision of 0.005 arcsec (rms). The autofocus adjustment is specified to maintain a focus stability of 0.01 waves in the focal plane of the CWS.

astro-ph.IM↗

arXiv2023

Slow Solar Wind Connection Science during Solar Orbiter's First Close Perihelion Passage

The Slow Solar Wind Connection Solar Orbiter Observing Plan (Slow Wind SOOP) was developed to utilise the extensive suite of remote sensing and in situ instruments on board the ESA/NASA Solar Orbiter mission to answer significant outstanding questions regarding the origin and formation of the slow solar wind. The Slow Wind SOOP was designed to link remote sensing and in situ measurements of slow wind originating at open-closed field boundaries. The SOOP ran just prior to Solar Orbiter's first close perihelion passage during two remote sensing windows (RSW1 and RSW2) between 2022 March 3-6 and 2022 March 17-22, while Solar Orbiter was at a heliocentric distance of 0.55-0.51 and 0.38-0.34 au from the Sun, respectively. Coordinated observation campaigns were also conducted by Hinode and IRIS. The magnetic connectivity tool was used, along with low latency in situ data, and full-disk remote sensing observations, to guide the target pointing of Solar Orbiter. Solar Orbiter targeted an active region complex during RSW1, the boundary of a coronal hole, and the periphery of a decayed active region during RSW2. Post-observation analysis using the magnetic connectivity tool along with in situ measurements from MAG and SWA/PAS, show that slow solar wind, with velocities between 210 and 600 km/s, arrived at the spacecraft originating from two out of the three of the target regions. The Slow Wind SOOP, despite presenting many challenges, was very successful, providing a blueprint for planning future observation campaigns that rely on the magnetic connectivity of Solar Orbiter.

astro-ph.SR↗

arXiv2020

GREGOR: Optics Redesign and Updates from 2018-2020

The GREGOR telescope was inaugurated in 2012. In 2018, we started a complete upgrade, involving optics, alignment, instrumentation, mechanical upgrades for vibration reduction, updated control systems, and building enhancements and, in addition, adapted management and policies. This paper describes all major updates performed during this time. Since 2012, all powered mirrors except for M1 were exchanged. Starting from 2020, GREGOR observes with diffraction-limited performance and a new optics and instrument layout.

astro-ph.IM↗

arXiv2013

The GREGOR Fabry-Pérot Interferometer and its companion the Blue Imaging Solar Spectrometer

The GREGOR Fabry-Pérot Interferometer (GFPI) is one of three first-light instruments of the German 1.5-meter GREGOR solar telescope at the Observatorio del Teide, Tenerife, Spain. The GFPI allows fast narrow-band imaging and post-factum image restoration. The retrieved physical parameters will be a fundamental building block for understanding the dynamic Sun and its magnetic field at spatial scales down to about 50 km on the solar surface. The GFPI is a tunable dual-etalon system in a collimated mounting. It is designed for spectrometric and spectropolarimetric observations between 530-860 nm and 580-660 nm, respectively, and possesses a theoretical spectral resolution R of about 250,000. Large-format, high-cadence CCD detectors with sophisticated computer hard- and software enable the scanning of spectral lines in time-spans equivalent to the evolution time of solar features. The field-of-view (FOV) of 50" x 38" covers a significant fraction of the typical area of active regions in the spectroscopic mode. In case of Stokes-vector spectropolarimetry, the FOV reduces to 25" x 38". We present the main characteristics of the GFPI including advanced and automated calibration and observing procedures. We discuss improvements in the optical design of the instrument and show first observational results. Finally, we lay out first concrete ideas for the integration of a second FPI, the Blue Imaging Solar Spectrometer (BLISS), which will explore the blue spectral region below 530 nm.

astro-ph.IM↗

arXiv2012

GREGOR Fabry-Perot Interferometer - status report and prospects

The GREGOR Fabry-Perot Interferometer (GFPI) is one of three first-light instruments of the German 1.5-meter GREGOR solar telescope at the Observatorio del Teide, Tenerife, Spain. The GFPI allows fast narrow-band imaging and post-factum image restoration. The retrieved physical parameters will be a fundamental building block for understanding the dynamic Sun and its magnetic field at spatial scales down to 50 km on the solar surface. The GFPI is a tunable dual-etalon system in a collimated mounting. It is designed for spectropolarimetric observations over the wavelength range from 530-860 nm with a theoretical spectral resolution of R ~ 250,000. The GFPI is equipped with a full-Stokes polarimeter. Large-format, high-cadence CCD detectors with powerful computer hard- and software enable the scanning of spectral lines in time spans equivalent to the evolution time of solar features. The field-of-view of 50" x 38" covers a significant fraction of the typical area of active regions. We present the main characteristics of the GFPI including advanced and automated calibration and observing procedures. We discuss improvements in the optical design of the instrument and show first observational results. Finally, we lay out first concrete ideas for the integration of a second FPI, the Blue Imaging Solar Spectrometer, which will explore the blue spectral region below 530 nm.

astro-ph.IM↗

arXiv2012

The GREGOR solar telescope on Tenerife

2011 was a successful year for the GREGOR project. The telescope was finally completed in May with the installation of the 1.5-meter primary mirror. The installation of the first-light focal plane instruments was completed by the end of the year. At the same time, the preparations for the installation of the high-order adaptive optics were finished, its integration to the telescope is scheduled for early 2012. This paper describes the telescope and its instrumentation in their present first light configuration, and provides a brief overview of the science goals of GREGOR.

astro-ph.IM↗

arXiv2011

The GREGOR Fabry-Perot Interferometer - A New Instrument for High-Resolution Spectropolarimetric Solar Observations

Fabry-Perot interferometers have advantages over slit spectrographs because they allow fast narrow-band imaging and post-factum image reconstruction of spectropolarimetric data. Temperature, plasma velocity, and magnetic field maps can be derived from inversions of photospheric and chromospheric spectral lines, thus, advancing our understanding of the dynamic Sun and its magnetic fields at the smallest spatial scales. The GREGOR Fabry-Perot Interferometer (GFPI) is one of two firstlight instruments of the 1.5-meter GREGOR solar telescope, which is currently being commissioned at the Observatorio del Teide, Tenerife, Spain. The GFPI operates close to the diffraction limit of GREGOR, thus, providing access to fine structures as small as 60 km on the solar surface. The field-of-view of 52"x 40" is sufficiently large to cover significant portions of active regions. The GFPI is a tuneable dual-etalon system in a collimated mounting. Equipped with a full-Stokes polarimeter, it records spectropolarimetric data with a spectral resolution of R = 250,000 over the wavelength range from 530-860 nm. Large-format, high-cadence CCD detectors with powerful computer hard- and software facilitate scanning of spectral lines in time spans corresponding to the evolution time-scale of solar features. We present the main characteristics of the GFPI including the latest developments in software, mechanical mounts, and optics.

astro-ph.IM↗