arXiv subjects

Rekhesh Mohan

Publications and source records attributed to Rekhesh Mohan.

17 recordsLinked to original sources

arXiv2025

Near Ultraviolet Transient Explorer (NUTEx): A CubeSat-Based NUV Imaging Payload for Transient Sky Surveys

The Near Ultraviolet Transient Explorer (NUTEx) is a CubeSat-based near-ultraviolet (NUV) imaging payload designed for transient sky surveys and is currently under development. CubeSats are compact and cost-effective satellite platforms that have emerged as versatile tools for scientific exploration and technology demonstrations in space. NUTEx is an imaging telescope operating in the 200-300 nm wavelength range, intended for deployment on a micro-satellite bus. The optical system is based on a Ritchey Chretien (RC) telescope configuration, featuring a 146 mm primary mirror. The detector is a photon-counting microchannel plate (MCP) device with a solar-blind photocathode, paired with an in-house developed readout unit. The instrument has a wide field of view (FoV) of 4 deg, a peak effective area of approximately 18 sq cm at 260 nm, and can reach a sensitivity of 21 AB magnitude (SNR = 5) in a 1200 second exposure. The primary scientific objective of NUTEx is to monitor the night sky for transient phenomena, such as supernova remnants, flaring M-dwarf stars, and other short-timescale events. The payload is currently scheduled for launch in Q2 2026. This paper presents the NUTEx instrument design, outlines its scientific goals and capabilities, and provides an overview of the electronics and mechanical subsystems, including structural analysis.

astro-ph.IM↗

arXiv2025

SAMPLE -- Stratospheric Altitude Microbiology Probe for Life Existence -- A Method of Collection of Stratospheric Samples Using Balloon-Borne Payload System

The Earth possesses many environmental extremes that mimic conditions on extraterrestrial worlds. The stratosphere at 30-40 km altitude closely resembles the surface of Mars in terms of pressure, temperature, and radiation levels (UV, proton, and Galactic cosmic rays). While microbial life in the troposphere is well documented, the true upper limit of Earth's biosphere remains unclear. The stratosphere offers a promising environment to explore microbial survival in such extreme conditions. Despite its significance to astrobiology, this region remains largely unexplored due to difficulties in access and avoiding contamination. To address this, we have developed SAMPLE (Stratospheric Altitude Microbiology Probe for Life Existence), a balloon-borne payload designed to collect dust samples from the stratosphere and return them in conditions suitable for lab analysis. The entire system is novel and designed in-house, with weight- and stress-optimized components. The main payload includes three pre-sterilized sampling trays and a controller that determines altitude and governs tray operation. One tray will remain closed during flight (airborne control) and another on the ground (cleanroom control) to monitor contamination. Additional systems include environmental sensors, GPS trackers, cameras, and a Flight Termination Unit (FTU) to end the mission once sampling is complete. A parachute ensures the safe recovery of the payload. Upon retrieving the payload, the sampling trays (including controls) will be sent to a suitable laboratory where the samples will be examined for the presence and nature of collected material.

astro-ph.IM↗

arXiv2025

On-axis afocal telescopes as framework for Cubesat based astronomical imagers and slit-less spectrographs

Cubesats present unique opportunities for observational astronomy in the modern era. They are useful in observing difficult-to-access wavelength regions and long-term monitoring of interesting astronomical sources. However, conventional telescope designs are not necessarily the best fit for restricted envelope of a Cubesat. Additionally, fine-pointing stability on these platforms is difficult due to the low mass of the spacecraft and special allocations within the optical design are needed to achieve stable pointing. We propose afocal telescope designs as the framework to realise imagers and low-resolution spectrographs on Cubesat platforms. These designs help reduce the number of components in the optical chain and aim to improve throughput and sensitivity compared to conventional designs. Additionally, they also provide a fine steering mechanism within a collimated beam section. Fine beam steering within the collimated beam section avoids issues of image degradation due to out-of-plane rotation of the image plane or offset in the rotation axis of the mirror. This permits the use of simple and mostly off-the-shelf tip-tilt mirrors for beam steering. The designs discussed here also allow for a standard telescope design to be used in many instrument types; thus reducing the complexity as well as the development time and cost. The optical design, performance and SNR estimations of these designs along with some interesting science cases are discussed. A number of practical aspects in implementation such as guiding, tolerancing, choice of detectors, vibration analysis and laboratory test setups are also presented.

astro-ph.IM↗

arXiv2024

Ultraviolet Extinction Sky Survey (UVESS): A mission concept for probing the interstellar medium in the Milky Way and Local Group galaxies

The 2175 Å bump shows considerable variations in its strength, width, and central wavelength when observed along different sightlines in the Milky Way and other galaxies. These variations offer valuable insights into the composition, size distribution, and processing of interstellar dust grains along different sightlines. This paper introduces a mission concept called UVESS (Ultraviolet Extinction Sky Survey) aimed at exploring the composition of the interstellar medium (ISM) within both the Milky Way and nearby Local Group Galaxies by mapping the variation of UV extinction curve slopes and the 2175 Å feature across a majority of the sky to gain insights into the makeup of the ISM. Recent advancements in UV instrumentation and technologies pave the way for the development of high-throughput instruments in compact form factors. In this paper, we outline mission science goals and instrument concept tailored for a small satellite-based platform dedicated to the study of UV extinction.

astro-ph.IM↗

arXiv2024

Spectroscopic Investigation of Nebular Gas (SING): Instrument Design, Assembly and Calibration

The Spectroscopic Investigation of Nebular Gas (SING) is a near-ultraviolet (NUV) low-resolution spectrograph payload designed to operate in the NUV range, 1400 $\unicode{x212B}$ -- 2700 $\unicode{x212B}$, from a stable space platform. SING telescope has a primary aperture of 298 mm, feeding the light to the long-slit UV spectrograph. SING has a field of view (FOV) of 1$^{\circ}$, achieving a spatial resolution of 1.33 arc minute and spectral resolution of 3.7 $\unicode{x212B}$ ($R\sim600$) at the central wavelength. SING employs a micro-channel plate (MCP) with a CMOS readout-based photon-counting detector. The instrument is designed to observe diffuse sources such as nebulae, supernova remnants, and the interstellar medium (ISM) to understand their chemistry. SING was selected by the United Nations Office for Outer Space Affairs to be hosted on the Chinese Space Station. The instrument will undergo qualification tests as per the launch requirements. In this paper, we describe the hardware design, optomechanical assembly, and calibration of the instrument.

astro-ph.IM↗

arXiv2024

Development Of Raspberry Pi-based Processing Unit for UV Photon-Counting Detectors

In ultraviolet (UV) astronomical observations, photons from the sources are very few compared to the visible or infrared (IR) wavelength ranges. Detectors operating in the UV usually employ a photon-counting mode of operation. These detectors usually have an image intensifier sensitive to UV photons and a readout mechanism that employs photon counting. The development of readouts for these detectors is resource-intensive and expensive. In this paper, we describe the development of a low-cost UV photon-counting detector processing unit that employs a Raspberry Pi with its in built readout to perform the photon-counting operation. Our system can operate in both 3x3 and 5x5 window modes at 30 frames per sec (fps), where 5x5 window mode also enables the provision of detection of double events. The system can be built quickly from readily available custom-off-the-shelf (COTS) components and is thus used in inexpensive CubeSats or small satellite missions. This low-cost solution promises to broaden access to UV observations, advancing research possibilities in space-based astronomy.

astro-ph.IM↗

arXiv2022

Low-Cost Raspberry Pi Star Sensor for Small Satellites

We present here a low-cost Raspberry Pi (RPi)-based star sensor StarberrySense using commercial-off-the-shelf (COTS) components, developed and built for applications in small satellites and CubeSat-based missions. A star sensor is one of the essential instruments onboard a satellite for attitude determination. However, most commercially available star sensors are expensive and bulky to be used in small satellite missions. StarberrySense is a configurable system -- it can operate as an imaging camera, a centroiding camera, or as a star sensor. We describe the algorithms implemented in the sensor, its assembly and calibration. This payload was selected by a recent Announcement of Opportunity call for payloads to fly on the PS4-Orbital Platform by the Indian Space Research Organization (ISRO).

astro-ph.IM↗

arXiv2022

The Near Ultraviolet Transient Surveyor (NUTS): An ultraviolet telescope to observe variable sources

Observing the ultraviolet (UV) sky for time-variable phenomena is one of the many exciting science goals that can be achieved by a relatively small aperture telescope in space. The Near Ultraviolet Transient Surveyor (NUTS) is a wide-field ($3^\circ$) imager with a photon-counting detector in the near-UV (NUV, 200-300 nm), to be flown on an upcoming small satellite mission. It has a Ritchey-Chretien (RC) telescope design with correction optics to enable wide-field observations while minimizing optical aberrations. We have used an intensified CMOS detector with a solar blind photocathode, to be operated in photon-counting mode. The main science goal of the instrument is the observation of transient sources in the UV, including flare stars, supernovae, and active galactic nuclei. NUTS's aperture size and effective area enable observation of relatively unexplored, brighter parts of the UV sky which are usually not accessible to larger missions. We have designed, fabricated, and assembled the instrument, and the final calibrations and environmental tests are being carried out. In this paper, we provide the scientific motivation and technical overview of the instrument and describe the assembly and calibration steps.

astro-ph.IM↗

arXiv2021

Testing a Prototype 1U CubeSat on a Stratospheric Balloon Flight

High-altitude balloon experiments are becoming very popular among universities and research institutes as they can be used for testing instruments eventually intended for space, and for simple astronomical observations of Solar System objects like the Moon, comets, and asteroids, difficult to observe from the ground due to atmosphere. Further, they are one of the best platforms for atmospheric studies. In this experiment, we build a simple 1U CubeSat and, by flying it on a high-altitude balloon to an altitude of about 30 km, where the total payload weighted 4.9 kg and examine how some parameters, such as magnetic field, humidity, temperature or pressure, vary as a function of altitude. We also calibrate the magnetometer to remove the hard iron and soft iron errors. Such experiments and studies through a stratospheric balloon flights can also be used to study the performance of easily available commercial sensors in extreme conditions as well. We present the results of the first flight, which helped us study the functionality of the various sensors and electronics at low temperatures reaching about -40 degrees Celsius. Further the motion of the payload has been tracked throughout this flight. This experiment took place on 8 March 2020 from the CREST campus of the Indian Institute of Astrophysics, Bangalore. Using the results from this flight, we identify and rectify the errors to obtain better results from the subsequent flights.

astro-ph.IM↗

arXiv2016

In-orbit Performance of UVIT on ASTROSAT

We present the in-orbit performance and the first results from the ultra-violet Imaging telescope (UVIT) on ASTROSAT. UVIT consists of two identical 38cm coaligned telescopes, one for the FUV channel (130-180nm) and the other for the NUV (200-300nm) and VIS (320-550nm) channels, with a field of view of 28 $arcmin$. The FUV and the NUV detectors are operated in the high gain photon counting mode whereas the VIS detector is operated in the low gain integration mode. The FUV and NUV channels have filters and gratings, whereas the VIS channel has filters. The ASTROSAT was launched on 28th September 2015. The performance verification of UVIT was carried out after the opening of the UVIT doors on 30th November 2015, till the end of March 2016 within the allotted time of 50 days for calibration. All the on-board systems were found to be working satisfactorily. During the PV phase, the UVIT observed several calibration sources to characterise the instrument and a few objects to demonstrate the capability of the UVIT. The resolution of the UVIT was found to be about 1.4 - 1.7 $arcsec$ in the FUV and NUV. The sensitivity in various filters were calibrated using standard stars (white dwarfs), to estimate the zero-point magnitudes as well as the flux conversion factor. The gratings were also calibrated to estimate their resolution as well as effective area. The sensitivity of the filters were found to be reduced up to 15\% with respect to the ground calibrations. The sensitivity variation is monitored on a monthly basis. UVIT is all set to roll out science results with its imaging capability with good resolution and large field of view, capability to sample the UV spectral region using different filters and capability to perform variability studies in the UV.

astro-ph.IM↗

arXiv2014

A Raspberry Pi-Based Attitude Sensor

We have developed a lightweight low-cost attitude sensor, based on a Raspberry Pi, built with readily available commercial components. It can be used in experiments where weight and power are constrained, such as in high- altitude lightweight balloon flights. This attitude sensor will be used as a major building block in a closed-loop control system with driver motors to stabilize and point cameras and telescopes for astronomical observations from a balloon-borne payload.

astro-ph.IM↗

arXiv2014

Prospect for UV observations from the Moon

Space astronomy in the last 40 years has largely been done from spacecraft in low Earth orbit (LEO) for which the technology is proven and delivery mechanisms are readily available. However, new opportunities are arising with the surge in commercial aerospace missions. We describe here one such possibility: deploying a small instrument on the Moon. This can be accomplished by flying onboard the Indian entry to the Google Lunar X PRIZE competition, Team Indus mission, which is expected to deliver a nearly 30 kgs of payloads to the Moon, with a rover as its primary payload. We propose to mount a wide-field far-UV (130--180 nm) imaging telescope as a payload on the Team Indus lander. Our baseline operation is a fixed zenith pointing but with the option of a mechanism to allow observations of different attitudes. Pointing towards intermediate ecliptic latitude (50 deg or above) ensures that the Sun is at least 40 deg off the line of sight at all times. In this position, the telescope can cover higher galactic latitudes as well as parts of Galactic plane. The scientific objectives of such a prospective are delineated and discussed.

astro-ph.IM↗

arXiv2007

A 3D Automated Classification Scheme for the TAUVEX data pipeline

In order to develop a pipeline for automated classification of stars to be observed by the TAUVEX ultraviolet space Telescope, we employ an artificial neural network (ANN) technique for classifying stars by using synthetic spectra in the UV region from 1250Åto 3220Åas the training set and International Ultraviolet Explorer (IUE) low resolution spectra as the test set. Both the data sets have been pre-processed to mimic the observations of the TAUVEX ultraviolet imager. We have successfully classified 229 stars from the IUE low resolution catalog to within 3-4 spectral sub-class using two different simulated training spectra, the TAUVEX spectra of 286 spectral types and UVBLUE spectra of 277 spectral types. Further, we have also been able to obtain the colour excess (i.e. E(B-V) in magnitude units) or the interstellar reddening for those IUE spectra which have known reddening to an accuracy of better than 0.1 magnitudes. It has been shown that even with the limitation of data from just photometric bands, ANNs have not only classified the stars, but also provided satisfactory estimates for interstellar extinction. The ANN based classification scheme has been successfully tested on the simulated TAUVEX data pipeline. It is expected that the same technique can be employed for data validation in the ultraviolet from the virtual observatories. Finally, the interstellar extinction estimated by applying the ANNs on the TAUVEX data base would provide an extensive extinction map for our galaxy and which could in turn be modeled for the dust distribution in the galaxy.

astro-ph↗

arXiv2004

A High Galactic Latitude HI 21cm-line Absorption Survey using the GMRT: I. Observations and Spectra

We have used the Giant Meterwave Radio Telescope (GMRT) to measure the Galactic HI 21-cm line absorption towards 102 extragalactic radio continuum sources, located at high (|b| >15deg.) Galactic latitudes. The Declination coverage of the present survey is Decl. ~ -45deg.. With a mean rms optical depth of ~0.003, this is the most sensitive Galactic HI 21-cm line absorption survey to date. To supplement the absorption data, we have extracted the HI 21-cm line emission profiles towards these 102 lines of sight from the Leiden Dwingeloo Survey of Galactic neutral hydrogen. We have carried out a Gaussian fitting analysis to identify the discrete absorption and emission components in these profiles. In this paper, we present the spectra and the components. A subsequent paper will discuss the interpretation of these results.

astro-ph↗

arXiv2004

A High Galactic Latitude HI 21cm-line Absorption Survey using the GMRT: II. Results and Interpretation

We have carried out a sensitive high-latitude (|b| > 15deg.) HI 21cm-line absorption survey towards 102 sources using the GMRT. With a 3-sigma detection limit in optical depth of ~0.01, this is the most sensitive HI absorption survey. We detected 126 absorption features most of which also have corresponding HI emission features in the Leiden Dwingeloo Survey of Galactic neutral Hydrogen. The histogram of random velocities of the absorption features is well-fit by two Gaussians centered at V(lsr) ~ 0 km/s with velocity dispersions of 7.6 +/- 0.3 km/s and 21 +/- 4 km/s respectively. About 20% of the HI absorption features form the larger velocity dispersion component. The HI absorption features forming the narrow Gaussian have a mean optical depth of 0.20 +/- 0.19, a mean HI column density of (1.46 +/- 1.03) X 10^{20} cm^{-2}, and a mean spin temperature of 121 +/- 69 K. These HI concentrations can be identified with the standard HI clouds in the cold neutral medium of the Galaxy. The HI absorption features forming the wider Gaussian have a mean optical depth of 0.04 +/- 0.02, a mean HI column density of (4.3 +/- 3.4) X 10^{19} cm^{-2}, and a mean spin temperature of 125 +/- 82 K. The HI column densities of these fast clouds decrease with their increasing random velocities. These fast clouds can be identified with a population of clouds detected so far only in optical absorption and in HI emission lines with a similar velocity dispersion. This population of fast clouds is likely to be in the lower Galactic Halo.

astro-ph↗

arXiv2001

GMRT Observations of Interstellar Clouds in the 21cm line of Atomic Hydrogen

Nearby interstellar clouds with high (|v| >/= 10 km/s) random velocities although easily detected in NaI and CaII lines have hitherto not been detected (in emission or absorption) in the HI 21cm line. We describe here deep Giant Metrewave Radio Telescope (GMRT) HI absorption observations toward radio sources with small angular separation from bright O and B stars whose spectra reveal the presence of intervening high random velocity CaII absorbing clouds. In 5 out of the 14 directions searched we detect HI 21cm absorption features from these clouds. The mean optical depth of these detections is ~ 0.09 and FWHM is ~ 10 km/s, consistent with absorption arising from CNM clouds.

astro-ph↗

arXiv2000

HI 21cm-line observations with the GMRT towards interstellar clouds previously seen in optical absorption

We have made HI 21cm-line absorption measurements using the GMRT towards 15 directions in the Galaxy which are known to have high random velocity clouds as seen in the optical absorption lines of CaII and NaI. For the first time, in 6 out of these 15 directions we detect HI absorption features corresponding to the high random velocity optical absorption lines. The mean optical depth of these detections is ~ 0.08.

astro-ph↗