arXiv subjects

Remco Hartkamp

Publications and source records attributed to Remco Hartkamp.

6 recordsLinked to original sources

arXiv2024

Unified Framework for Laser-induced Transient Bubble Dynamics within Microchannels

Oscillatory flow in confined spaces is central to understanding physiological flows and rational design of synthetic periodic-actuation based micromachines. Using theory and experiments on oscillating flows generated through a laser-induced cavitation bubble, we associate the dynamic bubble size (fluid velocity) and bubble lifetime to the laser energy supplied - a control parameter in experiments. Employing different channel cross-section shapes, sizes and lengths, we demonstrate the characteristic scales for velocity, time and energy to depend solely on the channel geometry. Contrary to the generally assumed absence of instability in low Reynolds number flows (<1000), we report a momentary flow distortion that originates due to the boundary layer separation near channel walls during flow deceleration. The emergence of distorted laminar states is characterized using two stages. First the conditions for the onset of instabilities is analyzed using the Reynolds number and Womersley number for oscillating flows. Second the growth and the ability of an instability to prevail is analyzed using the convective time scale of the flow. Our findings inform rational design of microsystems leveraging pulsatile flows via cavitation-powered microactuation.

physics.flu-dyn↗

arXiv2023

Laser-Induced Cavitation for Controlling Crystallization from Solution

We demonstrate that a cavitation bubble initiated by a Nd:YAG laser pulse below breakdown threshold induces crystallization from supersaturated aqueous solutions with supersaturation and laser-energy dependent nucleation kinetics. Combining high-speed video microscopy and simulations, we argue that a competition between the dissipation of absorbed laser energy as latent and sensible heat dictates the solvent evaporation rate and creates a momentary supersaturation peak at the vapor-liquid interface. The number and morphology of crystals correlate to the characteristics of the simulated supersaturation peak.

physics.chem-ph↗

arXiv2023

Low-cost fluorescence microscope with microfluidic device fabrication for optofluidic applications

Optofluidic devices have revolutionized the manipulation and transportation of fluid at smaller length scales ranging from micrometers to millimeters. We describe a dedicated optical setup for studying laser-induced cavitation inside a microchannel. In a typical experiment, we use a tightly focused laser beam to locally evaporate the solution laced with a dye resulting in the formation of a microbubble. The evolving bubble interface is tracked using high-speed microscopy and digital image analysis. Furthermore, we extend this system to analyze fluid flow through fluorescence$-$Particle Image Velocimetry (PIV) technique with minimal adaptations. In addition, we demonstrate the protocols for the in-house fabrication of a microchannel tailored to function as a sample holder in this optical setup. In essence, we present a complete guide for constructing a fluorescence microscope from scratch using standard optical components with flexibility in the design and at a lower cost compared to its commercial analogues.

physics.ins-det↗

arXiv2023

A review on laser-induced crystallization from solution

Crystallization is abound in nature and industrial practice. A plethora of indispensable products ranging from agrochemicals and pharmaceuticals to battery materials, are produced in crystalline form in industrial practice. Yet, our control over the crystallization process across scales, from molecular to macroscopic, is far from complete. This bottleneck not only hinders our ability to engineer the properties of crystalline products essential for maintaining our quality of life but also hampers progress toward a sustainable circular economy in resource recovery. In recent years, approaches leveraging light fields have emerged as promising alternatives to manipulate crystallization. In this review article, we classify laser-induced crystallization approaches where light-material interactions are utilized to influence crystallization phenomena according to proposed underlying mechanisms and experimental setups. We discuss non-photochemical laser-induced nucleation, high-intensity laser-induced nucleation, laser trapping-induced crystallization, and indirect methods in detail. Throughout the review, we highlight connections amongst these separately evolving sub-fields to encourage interdisciplinary exchange of ideas.

physics.chem-ph↗

arXiv2018

Measuring surface charge: why experimental characterization and molecular modeling should be coupled

Surface charge controls many static and dynamic properties of soft matter and micro/nanofluidic systems, but its unambiguous measurement forms a challenge. Standard characterization methods typically probe an effective surface charge, which provides limited insight into the distribution and dynamics of charge across the interface, and which cannot predict consistently all surface-charge-governed properties. New experimental approaches provide local information on both structure and transport, but models are typically required to interpret raw data. Conversely, molecular dynamics simulations have helped showing the limits of standard models and developing more accurate ones, but their reliability is limited by the empirical interaction potentials they are usually based on. This review highlights recent developments and limitations in both experimental and computational research focusing on the liquid-solid interface. Based on recent studies, we make the case that coupling of experiments and simulations is pivotal tomitigate methodological shortcomings and address open problems pertaining to charged interfaces.

cond-mat.soft↗

arXiv2014

Brownian dynamics simulations of planar mixed flows of polymer solutions at finite concentrations

Periodic boundary conditions for planar mixed flows are implemented in the context of a multi-chain Brownian dynamics simulation algorithm. The effect of shear rate $\dot{\gamma}$, and extension rate $\dot{\epsilon}$, on the size of polymer chains, $\left $, and on the polymer contribution to viscosity, $\eta$, is examined for solutions of FENE dumbbells at finite concentrations, with excluded volume interactions between the beads taken into account. The influence of the mixedness parameter, $\chi$, and flow strength, $\dot{\Gamma}$, on $\left $ and $\eta$, is also examined, where $\chi \rightarrow 0$ corresponds to pure shear flow, and $\chi \rightarrow 1$ corresponds to pure extensional flow. It is shown that there exists a critical value, $\chi_\text{c}$, such that the flow is shear dominated for $\chi < \chi_\text{c}$, and extension dominated for $\chi > \chi_\text{c}$.

cond-mat.soft↗