arXiv subjects

Remo Proietti Zaccaria

Publications and source records attributed to Remo Proietti Zaccaria.

15 recordsLinked to original sources

arXiv2026

Energy Harvesting for Self-Powered Microsystems: A Critical Review of Materials, Power Management, and System Integration

The relentless proliferation of the Internet of Things (IoT), wearable bioelectronics, and cyber-physical infrastructure has rendered the conventional electrochemical battery the single most prohibitive bottleneck to long-term, maintenance-free autonomous microsystems. Energy harvesting, i.e. the conversion of ambient mechanical, thermal, and radiative energy into usable electrical power, has consequently emerged as a transformative paradigm to realize perpetual, battery-independent operation. This review critically synthesizes the most significant advances in energy harvesting technologies over the recent period, with a focus on triboelectric nanogenerators (TENGs), piezoelectric and pyroelectric transducers, indoor photovoltaics, radio-frequency (RF) rectennas, and their multi-source hybrid integrations. We highlight paradigm-shifting breakthroughs, including liquid-solid TENGs that eliminate mechanical wear, nonlinear piezoelectric oscillators that broaden operational bandwidth by over 300%, machine-learning-accelerated material discovery for high charge-density dielectrics, and multiband and broadband RF harvesting enabled by metamaterial architectures. Crucially, we move beyond conventional materials-centric narratives to critically interrogate the "unseen" system-level bottlenecks: ultra-low-voltage cold-start power management integrated circuits (PMICs), the impedance-matching challenges of hybrid energy sources, and the persistent degradation of micro-supercapacitors and thin-film batteries under realistic field conditions.

physics.app-ph↗

arXiv2025

Comparison of near-field light intensities: plasmon nanofocusing vs localized plasmon resonance

The localized surface plasmon resonance of metallic nanostructures produces strongly localized and enhanced near-field light, significantly contributing to nanophotonics research and applications. Plasmon nanofocusing represents another method for generating near-field light through the propagation and condensation of plasmons on tapered plasmonic structures. In both methods, the intensity of near-field light is a critical aspect for many applications. In this study, we numerically inspect and compare the intensities of near-field light generated by either localized plasmon resonance or plasmon nanofocusing. To account for the light-induced changes in the optical properties of plasmonic structures, which in turn influence the near-field light intensity, we couple electromagnetic and thermal calculations to consider in a fully self-consistent manner the effects of the incident light and the light-induced temperature rise within the metal. A gold nanorod and a cone were adopted for exciting the localized plasmon resonance and plasmon nanofocusing, respectively. We find that plasmon nanofocusing generates approximately 1.5 times as strong near-field light as localized plasmon resonance. Our research provides a necessary foundation for generating near-field light, which is crucial for advancing the applications of near-field optics.

physics.optics↗

arXiv2025

Dynamics of DNA-Templated Ultrafine Silver Nanowires Formation

Recent research on silver nanowires prepared on DNA templates has focused on two fundamental applications: nano-scale circuits and sensors. Despite its broad potential, the formation kinetics of DNA-templated silver nanowires remains unclear. Here, we present an experimental demonstration of the formation of silver nanowires with a diameter of 2.2+0.4 nm at the single-molecule level through chemical reduction. We conducted equilibrium and perturbation kinetic experiments to measure force spectroscopy during the formation of Ag+ -DNA complexes and Ag-DNA complexes, using optical tweezers combined with microfluidics. The addition of AgNO3 resulted in an increase in force of 5.5-7.5 pN within 2 minutes, indicating that Ag+ compacts the DNA structure. In contrast, the addition of hydroquinone caused the force to decrease by 4-5 pN. Morphological characterization confirmed the presence of a dense structure formed by silver atoms bridging the DNA strands, and revealed conformational differences before and after metallization. We compare our experimental data with Brownian dynamics simulations using a coarse-grained double-stranded DNA (dsDNA) model that provides insights on the dependency of the force on the persistence length.

physics.app-ph↗

arXiv2023

Nanoporous Metals: From Plasmonic Properties to Applications in Enhanced Spectroscopy and Photocatalysis

The field of plasmonics is capable of enabling interesting applications in the different wavelength ranges, spanning from the ultraviolet up to the infrared. The choice of plasmonic material and how the material is nanostructured have significant implications for ultimate performance of any plasmonic device. Artificially designed nanoporous metals have interesting material properties including large specific surface area, distinctive optical properties, high electrical conductivity, and reduced stiffness, implying their potentials for many applications. This manuscript reviews the wide range of available nanoporous metals, mainly focusing on their properties as plasmonic materials. While extensive reports on the use and characterization of NPMs exist, a detailed discussion on their connection with surface plasmons and enhanced spectroscopies as well as photocatalysis is missing. Here, we report on different metals investigated, from the most used nanoporous gold to mixed metal compounds, and discuss each of these plasmonic materials suitability for a range of structural design and applications. Finally, we discuss the potentials and limitations of the traditional and alternative plasmonic materials for applications in enhanced spectroscopy and photocatalysis.

physics.app-ph↗

arXiv2023

Impact of structural defects on the performance of graphene plasmon-based molecular sensors

Graphene-based plasmonic devices are regarded to be suitable for a plethora of applications, ranging from mid-infrared to terahertz frequencies. In this regard, among the peculiarities associated with graphene, it is well known that plasmons are tunable and tend to show stronger confinement as well as a longer lifetime than in the noble-metal counterpart. However, due to the two-dimensional specificity of graphene, the presence of defects might induce stronger effects than in bulky noble metals. Here, we theoretically investigate the impact of structural defects hosted by graphene on selected figures of merit associated to localized plasmons, which are of key technological importance for plasmon-based molecular sensing. By considering an optimized graphene nanostructure, we provide a comparative analysis intended to shed light on the impact of the type of defect on graphene localized plasmons, that regards distinct types of defects commonly arising from fabrication procedures or exposure to radiation. This understanding will help industry and academia in better identifying the most suitable applications for graphene-based molecular sensing.

cond-mat.mes-hall↗

arXiv2022

Advances in ultrafast plasmonics

In the past twenty years, we have reached a broad understanding of many light-driven phenomena in nanoscale systems. The temporal dynamics of the excited states are instead quite challenging to explore, and, at the same time, crucial to study for understanding the origin of fundamental physical and chemical processes. In this review we examine the current state and prospects of ultrafast phenomena driven by plasmons both from a fundamental and applied point of view. This research area is referred to as ultrafast plasmonics and represents an outstanding playground to tailor and control fast optical and electronic processes at the nanoscale, such as ultrafast optical switching, single photon emission and strong coupling interactions to tailor photochemical reactions. Here, we provide an overview of the field, and describe the methodologies to monitor and control nanoscale phenomena with plasmons at ultrafast timescales in terms of both modeling and experimental characterization. Various directions are showcased, among others recent advances in ultrafast plasmon-driven chemistry and multi-functional plasmonics, in which charge, spin, and lattice degrees of freedom are exploited to provide active control of the optical and electronic properties of nanoscale materials. As the focus shifts to the development of practical devices, such as all-optical transistors, we also emphasize new materials and applications in ultrafast plasmonics and highlight recent development in the relativistic realm. The latter is a promising research field with potential applications in fusion research or particle and light sources providing properties such as attosecond duration.

physics.optics↗

arXiv2022

Swarm of lightsail nanosatellites for Solar System exploration

This paper presents a study for the realization of a space mission which employs nanosatellites driven by an external laser source impinging on an optimized lightsail, as a valuable technology to launch swarms of spacecrafts into the Solar System. Nanosatellites propelled by laser can be useful for the heliosphere exploration and for planetary observation, if suitably equipped with sensors, or be adopted for the establishment of network systems when placed into specific orbits. By varying the area-to-mass ratio (i.e., the ratio between the sail area and the payload weight) and the laser power, it is ossible to insert nanosatellites into different hyperbolic orbits with respect to Earth, thus reaching the target by means of controlled trajectories in a relatively short amount of time. A mission involving nanosatellites of the order of 1 kg of mass is envisioned, by describing all the on-board subsystems and satisfying all the requirements in term of power and mass budget. Particular attention is paid to the telecommunication subsystem, which must offer all the necessary functionalities. To fabricate the lightsail, the thin films technology has been considered, by verifying the sail thermal stability during the thrust phase. Moreover, the problem of mechanical stability of the lightsail has been tackled, showing that the distance between the ligthsail structure and the payload plays a pivotal role. Some potential applications of the proposed technology are discussed, such as the mapping of the heliospheric environment.

physics.app-ph↗

arXiv2022

All-optical Reconfiguration of Ultrafast Dichroism in Gold Metasurfaces

Optical metasurfaces have come into the spotlight as a promising platform for light manipulation at the nanoscale, including ultrafast all-optical control via excitation with femtosecond laser pulses. Recently, dichroic metasurfaces have been exploited to modulate the polarization state of light with unprecedented speed. Here, we theoretically predict and experimentally demonstrate by pump-probe spectroscopy the capability to reconfigure the ultrafast dichroic signal of a gold metasurface by simply acting on the polarization of the pump pulse, which is shown to reshape the spatio-temporal distribution of the optical perturbation. The photoinduced anisotropic response, driven by out-of-equilibrium carriers and extinguished in a sub-picosecond temporal window, is readily controlled in intensity by tuning the polarization direction of the excitation up to a full sign reversal. This work proves that nonlinear metasurfaces offer the flexibility to tailor their ultrafast optical response in a fully all-optically reconfigurable platform.

physics.optics↗

arXiv2021

Nonlinear Hall effect as a local probe of plasmonic magnetic hot spots

Recently developed plasmonic nanostructures are able to generate intense and localized magnetic hot spots in a large spectral range from the terahertz to the visible. However, a direct measurement of the magnetic field at the hot spot has not been performed yet, due to the absence of magnetic field detectors that work at those high frequencies and that fit the hot-spot area. We propose to place a graphene ribbon in the hot spot of a plasmonic nanostructure driven by a laser beam, such that a current is generated due to both the magnetic field at the hot spot and the electric field of the laser. We demonstrate that a nonlinear Hall voltage, which can be measured by standard electrical means, builds up across the ribbon, making it possible to directly probe the magnetic field at the hot spot.

cond-mat.mes-hall↗

arXiv2020

Transient optical symmetry breaking for ultrafast broadband dichroism in plasmonic metasurfaces

Ultrafast nanophotonics is an emerging research field aimed at the development of nanodevices capable of light modulation with unprecedented speed. A promising approach exploits the optical nonlinearity of nanostructured materials (either metallic or dielectric) to modulate their effective permittivity via interaction with intense ultrashort laser pulses. While the ultrafast temporal dynamics of such nanostructures following photoexcitation has been studied in depth, sub-ps transient spatial inhomogeneities taking place at the nanoscale have been so far almost ignored. Here we theoretically predict and experimentally demonstrate that the inhomogeneous space-time distribution of photogenerated hot carriers induces a transient symmetry breaking in a plasmonic metasurface made of highly symmetric metaatoms. The process is fully reversible, and results in a broadband transient dichroic optical response with a recovery of the initial isotropic state in less than 1 picosecond, overcoming the speed bottleneck caused by slower relaxation processes, such as electron-phonon and phonon-phonon scattering. Our results pave the way to the development of ultrafast dichroic devices, capable of Tera bit/s modulation of light polarization.

physics.optics↗

arXiv2020

Photoinduced Temperature Gradients in Sub-wavelength Plasmonic Structures: The Thermoplasmonics of Nanocones

Plasmonic structures are renowned for their capability to efficiently convert light into heat at the nanoscale. However, despite the possibility to generate deep sub-wavelength electromagnetic hot spots, the formation of extremely localized thermal hot spots is an open challenge of research, simply because of the diffusive spread of heat along the whole metallic nanostructure. Here we tackle this challenge by exploiting single gold nanocones. We theoretically show how these structures can indeed realize extremely high temperature gradients within the metal, leading to deep sub-wavelength thermal hot spots, owing to their capability of concentrating light at the apex under resonant conditions even under continuous wave illumination. A three-dimensional Finite Element Method model is employed to study the electromagnetic field in the structure and subsequent thermoplasmonic behaviour, in terms of the three-dimensional temperature distribution. We show how the latter is affected by nanocone size, shape, and composition of the surrounding environment. Finally, we anticipate the use of photoinduced temperature gradients in nanocones for applications in optofluidics and thermoelectrics or for thermally induced nanofabrication.

physics.optics↗

arXiv2020

Planar Aperiodic Arrays as Metasurfaces for Optical Near-Field Patterning

Plasmonic metasurfaces have spawned the field of flat optics using nanostructured planar metallic or dielectric surfaces that can replace bulky optical elements and enhance the capabilities of traditional far-field optics. Furthermore, the potential of flat optics can go far beyond far-field modulation, and can be exploited for functionality in the near-field itself. Here, we design metasurfaces based on aperiodic arrays of plasmonic Au nanostructures for tailoring the optical near-field in the visible and near-infrared spectral range. The basic element of the arrays is a rhomboid that is modulated in size, orientation and position to achieve the desired functionality of the micron-size metasurface structure. Using two-photon-photoluminescence as a tool to probethe near-field profiles in the plane of the metasurfaces, we demonstrate the molding of light into different near-field intensity patterns and active pattern control via the far-field illumination. Finite element method simulations reveal that the near-field modulation occurs via a combination of the plasmonic resonances of the rhomboids and field enhancement in the nanoscale gaps in between the elements. This approach enables optical elements that can switch the near-field distribution across the metasurface via wavelength and polarization of the incident far-field light, and provides pathways for light matter interaction in integrated devices.

physics.app-ph↗

arXiv2019

Galvanic Replacement Reaction to prepare nanoporous Aluminum for UV plasmonics

Plasmonics applications have been extending into the ultraviolet region of the electromagnetic spectrum. Unfortunately the commonly used noble metals have intrinsic optical properties that limit their use above 350 nm. Aluminum is probably the most suitable material for UV plasmonics and in this work we show that nanoporous aluminum can be prepared starting from an alloy of Mg3Al2. The porous metal is obtained by means of a galvanic replacement reaction. Such a nanoporous metal can be exploited to achieve a plasmonic material for enhanced UV Raman spectroscopy and fluorescence. Thanks to the large surface to volume ratio this material represents a powerful platform for promoting interaction between plasmonic substrates and molecules in the UV.

physics.app-ph↗

arXiv2019

Nanoporous Aluminum-Magnesium Alloy for UV enhanced spectroscopy

We report the first preparation of nanoporous Al-Mg alloy films by selective dissolution of Mg from a Mg-rich AlxMg1-x alloy. We show how to tune the stoichiometry, the porosity and the oxide contents in the final film by modulating the starting ratio between Al and Mg and the dealloying procedure. The obtained porous metal can be exploited for enhanced UV spectroscopy. In this respect, we experimentally demonstrate its efficacy in enhancing fluorescence and surface Raman scattering for excitation wavelengths of 360 nm and 257 nm respectively. Finally, we numerically show the superior performance of the nanoporous Al-Mg alloy in the UV range when compared to equivalent porous gold structures. The large area to surface ratio provided by this material make it a promising platform for a wide range of applications in UV/deep-UV plasmonics.

physics.app-ph↗

arXiv2002

Generalized Wigner Function Formulation for Quantum Systems with Open Boundaries

A rigorous microscopic theory for the description of quantum-transport phenomena in systems with open boundaries is proposed. We shall show that the application of the conventional Wigner-function formalism to this problem leads to unphysical results, like injection of coherent electronic states from the contacts. To overcome such basic limitation, we propose a generalization of the standard Wigner-function formulation, able to properly describe the incoherent nature of carrier injection at the device spatial boundaries as well as the interplay between phase coherence and energy relaxation/dephasing within the device active region. The proposed theoretical scheme constitutes the first rigorous derivation of the phenomenological injection model commonly employed in the simulation of open quantum devices.

cond-mat↗