arXiv subjects

Rex H. S. Bannerman

Publications and source records attributed to Rex H. S. Bannerman.

6 recordsLinked to original sources

arXiv2026

A Fibre-Integrated SPDC Heralded Single-Photon Source Using Zn-Indiffused PPLN Ridge Waveguides at Telecom Wavelengths

We report a fibre-integrated heralded single-photon source based on a commercial Zn-indiffused MgO:PPLN ridge waveguide operated in Type-0 degenerate spontaneous parametric down-conversion (SPDC). The device emits a broadband spectrum spanning approximately 70 nm across the telecom C-and L-bands, with an absolute brightness of $9.1\times 10^{9}$ pairs/(s mW). After accounting for optical losses, we determine an internal heralding efficiency of 58(5)%. The source maintains high purity, exhibiting a coincidences-to-accidentals ratio exceeding $9\times 10^{4}$ and a heralded second-order correlation of $g_{\text{h}}^{(2)}(0) = (5.53 \pm 0.46)\times 10^{-4}$. Low multi-photon noise and broadband emission demonstrate the viability of such platforms for wavelength-multiplexed quantum networking.

quant-ph↗

arXiv2026

Narrowband heralded single photons via Bragg grating inscription in germanium-doped photonic crystal fiber

We present a fiber-based source of narrowband heralded single photons in the telecoms C-band. Photon pairs were generated by spontaneous four-wave mixing in photonic crystal fiber (PCF) with a germanium-doped region incorporated into its core for enhanced photosensitivity. A fiber Bragg grating (FBG) with a bandwidth of 0.2 nm and contrast of 17.5 dB was UV-written into the PCF to reflect a sub-nanometre slice of the photon-pair spectrum. This allowed narrowband photons to be heralded at the proximal end of the fiber by detection events after the distal end. We present photon counting data with a coincidence-to-accidental ratio of up to 70. Our source demonstrates a viable route to fiber-integrated narrowband heralded single photon sources suitable for coupling to quantum memories and interfacing heterogeneous qubit types.

quant-ph↗

arXiv2024

Tunable kHz distributed feedback fiber laser enabled by glass additive-manufacturing

techniques can be considered as an attractive alternative to the often-cumbersome traditional manufacturing routes. With the use of high-power lasers, localized hot zones that are necessary for glass making can be obtained rapidly. For instance, Laser-Powder-Deposition enables rapid fabrication of short, high gain fibers used in e.g., distributed feedback fiber lasers (DFFL). DFFLs offer sought after performance suitable for a broad range of applications in modern photonics i.e., superior stability and narrower, single-frequency linewidth compared to conventional fiber lasers. Tunable, narrow laser sources with output in eye-safe spectrum are desired for sensing, signal multiplexing, LIDAR systems, quantum applications etc. In this work we present DFFL obtained using Laser-Powder-Deposition made Er-doped silica fiber. Milliwatt level, narrow line lasing (< 704 kHz, equipment limited) was obtained using a phaseshifted grating written in 16 mm long fiber. The backward slope efficiency was as high as 24% when pumping at 976 nm. The results presented in this work showcase new possibilities in fiber fabrication that were unlocked through laser-assisted additive manufacturing. This fiber laser sets the stage for the future of rapid fabrication of advanced fiber devices through unconventional manufacturing routes.

physics.optics↗

arXiv2020

Highly-Chirped Bragg Gratings for Integrated Silica Spectrometers

A blazed chirped Bragg grating in a planar silica waveguide device was used to create an integrated diffractive element for a spectrometer. The grating diffracts light from a waveguide and creates a wavelength dependent focus in a manner similar to a bulk diffraction grating spectrometer. An external imaging system is used to analyse the light, later device iterations plan to integrate detectors to make a fully integrated spectrometer. Devices were fabricated with grating period chirp rates in excess of 100nm/mm, achieving a focal length of 5.5mm. Correction of coma aberrations resulted in a device with a footprint of 20mm x 10mm, a peak FWHM resolution of 1.8nm, a typical FWHM resolution of 2.6nm and operating with a 160nm bandwidth centered at 1550nm.

physics.optics↗

arXiv2018

High-birefringence direct UV-written waveguides for heralded single-photon sources at telecommunication wavelengths

Direct UV-written waveguides are fabricated in silica-on-silicon with birefringence of $(4.9 \pm 0.2) \times 10^{-4}$, much greater than previously reported in this platform. We show that these waveguides are suitable for the generation of heralded single photons at telecommunication wavelengths by spontaneous four-wave mixing. A pulsed pump field at 1060 nm generates pairs of photons in highly detuned, spectrally uncorrelated modes near 1550 nm and 800 nm. Waveguide-to-fiber coupling efficiencies of 78-91% are achieved for all fields. Waveguide birefringence is controlled through dopant concentration of $\mathrm{GeCl_4}$ and $\mathrm{BCl_3}$ using the flame hydrolysis deposition process. The technology provides a route towards the scalability of silica-on-silicon integrated components for photonic quantum experiments.

physics.app-ph↗

arXiv2018

Modular Linear Optical Circuits

We propose and demonstrate a modular architecture for reconfigurable on-chip linear-optical circuits. Each module contains 10 independent phase-controlled Mach-Zehnder interferometers; several such modules can be connected to each other to build large reconfigurable interferometers. With this architecture, large interferometers are easier to build and characterize than with traditional, bespoke, monolithic designs. We demonstrate our approach by fabricating three modules in the form of UV-written silica-on-silicon chips. We characterize these chips, connect them to each other, and implement a wide range of linear optical transformations. We envisage that this architecture will enable many future experiments in quantum optics.

quant-ph↗