arXiv subjects

Ria G. Krämer

Publications and source records attributed to Ria G. Krämer.

6 recordsLinked to original sources

arXiv2026

Comparative analysis of fiber Bragg grating filter losses inscribed by continuous wave UV and femtosecond-IR lasers for astrophotonics

Fiber Bragg grating (FBG) filters have been demonstrated as promising components in astrophotonic instrumentation for near-infrared ground-based observations. Given the photon-starved nature of astronomical applications, it is critical to minimize insertion losses across astrophotonic components. In addition to the insertion loss (IL) introduced by specialty fibers and inscription techniques, FBGs exhibit cladding mode (CM) losses. In this work, we studied the loss characteristics of five filter lines in three photosensitive fibers, i.e., a low-numerical-aperture (NA) fiber, a high-NA bend-insensitive fiber, and a cladding-mode-suppressed (CMS) fiber, and in a non-photosensitive fiber, SMF-28. The filters were inscribed using two phase mask-based illumination methods: a continuous wave ultraviolet (UV) laser with a complex phase mask allowing for multi-channel filters, and a femtosecond infrared (fs-IR) laser with phase mask integrated shaping apertures for spectral profile control. Our results show that UV-inscribed gratings in high-NA bend-insensitive fiber yield the lowest CM losses ($\approx$ 0.5 dB) among photosensitive fibers, but exhibit the highest IL (4.6 dB), and FBGs in non-photosensitive SMF-28 fiber, inscribed with fs-IR, achieve the lowest IL (< 0.05 dB) with a comparatively higher CM loss (0.93 dB). To reduce the high IL in high-NA fiber, we explored tapering and bridging methods and report that bridging reduces IL by $\sim$ 3 dB. We show that both filter platforms remain viable for integration into an astrophotonic system, with IL below 1 dB. Finally, we propose a compact bridge-fiber scheme with the potential to further reduce IL to below 0.5 dB while reducing the number of bridging fibers and, consequently, the number of splice junctions by 50%.

astro-ph.IM↗

arXiv2026

Asynchronous Multi-photon Interference for Quantum Networks

Advanced quantum communication protocols require high-visibility quantum interference between photons generated at distant nodes, which places stringent demands on optical synchronization. Conventionally, synchronization of optical wave packets relies on pulsed sources and precise optical path stabilization. An alternative approach employs continuous-wave (CW) photon-pair sources, where temporal indistinguishability is enforced by post-selecting detection events within a coincidence window $τ_w$ shorter than the photon coherence time $T_c$. Despite its conceptual simplicity, the quantitative relation between relevant time scales, achievable interference visibility, and usable multi-photon rates has remained unclear. Here, we develop in detail and experimentally validate a theoretical framework that quantitatively describes time-resolved multi-photon interference in the CW regime. We explicitly incorporate detector timing jitter, photon coherence time, and temporal post-selection. The model is verified using four-photon Hong-Ou-Mandel interference measurements. Based on this validated framework, we determine the coincidence window that maximizes usable four-photon rates for a target visibility. Finally, we compare CW and pulsed SPDC sources under equivalent indistinguishability constraints and show that CW operation can achieve comparable rates while relaxing optical synchronization requirements.

quant-ph↗

arXiv2025

How to measure laser chirp rate at single-emitter excitation energies

We present a simple and direct method for measuring laser chirp rate, i.e., group delay dispersion (GDD) of ultrashort laser pulses at power levels compatible with single-quantum-emitter excitation. Traditional pulse characterization techniques rely on nonlinear optical processes that require high peak powers, making them unsuitable for the attojoule-to-femtojoule regime relevant to quantum photonics. Our approach utilizes a wavelength-to-time mapping method in which the arrival times of spectrally filtered components of a broadband pulse are recorded using a superconducting nanowire single-photon detector and correlated via a high-resolution time-tagging system. The resulting linear relationship between wavelength and arrival time directly yields the dispersion parameter and, subsequently, the GDD. Beyond single-emitter excitation, this technique can be applied in areas such as single-photon spectroscopy, ultralow-power optical communications, and time-domain quantum control, where linear and non-destructive dispersion characterization is essential.

physics.optics↗

arXiv2024

Robust Single-Photon Generation for Quantum Information Enabled by Stimulated Adiabatic Rapid Passage

The generation of single photons using solid-state quantum emitters is pivotal for advancing photonic quantum technologies, particularly in quantum communication. As the field continuously advances towards practical use cases and beyond shielded laboratory environments, specific demands are placed on the robustness of quantum light sources during operation. In this context, the robustness of the quantum light generation process against intrinsic and extrinsic effects is a major challenge. Here, we present a robust scheme for the coherent generation of indistinguishable single-photon states with very low photon number coherence (PNC) using a three-level system in a semiconductor quantum dot. Our novel approach combines the advantages of adiabatic rapid passage (ARP) and stimulated two-photon excitation (sTPE). We demonstrate robust quantum light generation while maintaining the prime quantum-optical quality of the emitted light state. Moreover, we highlight the immediate advantages for the implementation of various quantum cryptographic protocols.

quant-ph↗

arXiv2023

Compact Chirped Fiber Bragg Gratings for Single-Photon Generation from Quantum Dots

A scalable source of single photons is a key constituent of an efficient quantum photonic architecture. To realize this, it is beneficial to have an ensemble of quantum emitters that can be collectively excited with high efficiency. Semiconductor quantum dots hold great potential in this context, due to their excellent photophysical properties. Spectral variability of quantum dots is commonly regarded as a drawback introduced by the fabrication method. However, this is beneficial to realize a frequency-multiplexed single-photon platform. Chirped pulse excitation, relying on the so-called adiabatic rapid passage, is the most efficient scheme to excite a quantum dot ensemble due to its immunity to individual quantum dot parameters. Yet, the existing methods of generating chirped laser pulses to excite a quantum emitter are bulky, lossy, and mechanically unstable, which severely hampers the prospects of a quantum dot photon source. Here, we present a compact, robust, and high-efficiency alternative for chirped pulse excitation of solid-state quantum emitters. Our simple plug-and-play module consists of chirped fiber Bragg gratings (CFBGs), fabricated via femtosecond inscription, to provide high values of dispersion in the near-infrared spectral range, where the quantum dots emit. We characterize and benchmark the performance of our method via chirped excitation of a GaAs quantum dot, establishing high-fidelity single-photon generation. Our highly versatile chirping module coupled to a photon source is a significant milestone toward realizing practical quantum photonic devices.

physics.optics↗

arXiv2023

QUICK$^3$ -- Design of a satellite-based quantum light source for quantum communication and extended physical theory tests in space

Modern quantum technologies have matured such that they can now be used in space applications, e.g., long-distance quantum communication. Here, we present the design of a compact true single photon source that can enhance the secure data rates in satellite-based quantum key distribution scenarios compared to conventional laser-based light sources. Our quantum light source is a fluorescent color center in hexagonal boron nitride. The emitter is off-resonantly excited by a diode laser and directly coupled to an integrated photonic processor that routes the photons to different experiments performed directly on-chip: (i) the characterization of the single photon source and (ii) testing a fundamental postulate of quantum mechanics, namely the relation of the probability density and the wave function (known as Born's rule). The described payload is currently being integrated into a 3U CubeSat and scheduled for launch in 2024 into low Earth orbit. We can therefore evaluate the feasibility of true single photon sources and reconfigurable photonic circuits in space. This provides a promising route toward a high-speed quantum network.

quant-ph↗