arXiv subjects

Riano E. Giribaldi

Publications and source records attributed to Riano E. Giribaldi.

16 recordsLinked to original sources

arXiv2026

The oldest low-$α$ thin disc stars

The formation pathway of the $α$-poor Milky Way thin disc remains under debate. The latest observational data indicates the presence of comparable numbers of old stars in both the low- and high-$α$ disc components, suggesting either coeval or overlapping formation epochs. Using GALAH DR4, we provide evidence that the $α$-poor stars coexist with $α$-rich stars up to $\sim$12.5 Gyr. Stellar ages of 0.5 Gyr precision were re-derived for nearly $30\,000$ subgiant stars using accurate effective temperatures ($T_{\rm{eff}}$) from the infrared flux method (IRFM) together with distances based on Gaia parallaxes. About 22\% of the sample constitutes a population peaking at 9.2 Gyr, with evidence for an extended old-age tail reaching 12.5 Gyr. Among stars older than 10 and 11 Gyr, between 20 and 30\% have relative low [$α$/Fe] and solar-like metallicities ($-0.5 \leq \mathrm{[Fe/H]} \leq +0.5$ dex). These stars exhibit kinematics consistent with those of near solar-age $α$-poor stars in the thin disc. These stars can be evolved Sun-like stars, i.e. old solar analogues, whose $T_{\rm{eff}}$ and gravity modified with the time. Comparison with a well-tested Galactic disc chemical evolution model supports the presence of a significant fraction of old, $α$-poor disc stars, confirming the plausibility of our selection criteria. We provide a catalogue with the selected sample to facilitate spectroscopic follow-ups at high resolution.

astro-ph.SR↗

arXiv2026

Observational Signatures and Constraints on the Intermediate Neutron-Capture Process. The Case of the CEMP star TYC 6044-714-1 (RAVE J094921.8-161722)

Observational abundances of CEMP stars with patterns in between those produced by the rapid and slow nucleosynthesis processes (CEMP-rs stars) are currently invoked as evidence of synthesis via the intermediate process in the early AGB evolutionary phase of metal-poor low mass stars. Nevertheless, discriminating between r+s- and i-process hypotheses requires high-precision abundances obtained through advanced spectral modelling techniques. Theoretical models of the i-process have become more robust, incorporating refined stellar modelling and nuclear reaction physics, providing ranges of probable elemental abundances and isotopic ratios predictions to be confronted with observational determinations. We performed a new analysis of a high resolution and high S/N UVES spectrum of TYC 6044-714-1. We derived accurate effective temperature and highly precise atmospheric parameters, element abundances, and isotopic ratios using state-of-the-art 1D non-LTE and 3D non-LTE spectral line modelling. Using the latest AGB nucleosynthesis models, we assessed the possibility of the i-process to act aside the s-process. We find that TYC~6044-714-1 was likely born as a normal in-situ halo star about 13 Gyr ago, pre-enriched by the r-process through a standard Galactic chemical-evolution pathway. The s+r model provides the best overall reproduction of the observed heavy-element abundance pattern and Ba isotopic ratios, yielding excellent agreement across all three s-process peaks. While i+s+r models with increasing overshooting efficiency improve the fit for specific elements, they do not consistently reproduce the full abundance pattern. The i+s+r models require extreme and physically implausible conditions, and predict s-process Ba fractions inconsistent with those inferred from isotopic ratios of the 4934 Å resonance line. We conclude that the pure s+r scenario is the most plausible explanation.

astro-ph.SR↗

arXiv2026

The nucleosynthesis of Ba in the Early Universe. Constraints from elemental abundances and isotopic ratios

The [Ba/Eu] abundance ratio is commonly adopted as a tracer of the relative contributions of the slow (s) and rapid (r) neutron-capture processes. However, at [Fe/H] < -2 dex, Ba can be produced efficiently by both processes, rendering [Ba/Eu] non-deterministic. We propose to use barium isotopic ratio from the fitting of resonance Ba line profiles affected by hyperfine splitting. This approach requires precise atomic and stellar parameters, together with advanced spectral modelling, which, so far, remained insufficiently validated. We aim to provide a robust prescription of line-profile modelling for a reliable determination of the s- and r-processes fractions of barium in ordinary and peculiar stars. We assess the performance of 1D LTE and 1D non-LTE synthesis, and 3D non-LTE abundance corrections to model Ba lines. Alongside barium abundances and its isotopic ratios, we determine Eu and other neutron-capture element abundances to validate the method in the Titans metal-poor benchmark stars. The observational results are compared with the predictions of stochastic Galactic chemical evolution models that account the inhomogeneous mixing in the early times. We find that 1D LTE and 3D non-LTE Ba abundance determinations are equivalent, whereas the 1D non-LTE approach leads to systematic underestimations. These underestimations bias isotopic fractions toward higher r-process contributions. The inferred s- and r-process fractions demonstrate that [Ba/Eu] alone is an ambiguous tracer for ordinary stars within the range -0.8 < [Ba/Eu] < 0 dex. The comparison of our set of models, both for the proto-Milky Way halo and for Gaia-Enceladus galaxy is used to put constraints on the production of Ba at low [Fe/H], especially evaluating the role of rotating massive stars. The method here developed can be applied with confidence to both ordinary stars and peculiar stars enhanced in barium.

astro-ph.SR↗

arXiv2025

Barium isotopic ratios in metal-poor stars: calibrating the method with globular clusters

Identifying the nucleosynthesis processes behind heavy-element enrichment in stellar atmospheres is challenging. It typically relies on comparing observed abundance-to-iron ratios with theoretical predictions relative to the Sun, but this method is prone to uncertainty due to limitations of classical 1D hydrostatic models. One promising but still underexplored approach is to measure the isotopic composition of stellar atmospheres by focusing on elements that have both slow (s)-process and rapid (r)-process contributions. While the study of total elemental abundances offers a simplified view, isotopic ratios are directly linked to the underlying nucleosynthesis processes. Our aim is to provide a reliable method for quantifying the contributions of the s- and r-processes to barium in stellar atmospheres. This is achieved by determining barium isotopic ratios using 1D atmospheric models in combination with a carefully calibrated microturbulence, based on the comparison between subordinate and resonance Ba lines. In this initial study, we use member stars of the globular cluster NGC 6752 to calibrate the microturbulence ($v_{mic}$) value for both subordinate and resonance barium lines across different stellar evolutionary stages. This allows us to provide a reliable estimate of $v_{mic}$ that can be applied to accurately determine barium abundances and isotopic ratios in stars ranging from the main sequence to the upper red giant branch. The $v_{mic}$ scale adapted for barium subordinate lines is consistent with that derived from 3D model atmospheres, and thus the $T_{\mathrm{eff}}$-log $g$ dependent relations of the later can be used safely. The $v_{mic}$ for the resonance line at $λ$4934 Angstrom -- for the determination of the isotopic ratio -- is higher, and depends on the equivalent width (EW). We provide calibrated relations between $v_{mic}$ and EW for measuring isotopic ratios.

astro-ph.SR↗

arXiv2025

How homogeneous was the chemical enrichment of the Milky Way 13 gigayears ago?

We reanalyze the chemical composition of the metal-poorest tail of the Galactic halo using highly accurate atmospheric parameters Giribaldi et al. (2021, 2023) and cutting-edge 3D NLTE models Amarsi et al (2018). Most [Mg/Fe] versus [Fe/H] diagrams in the literature exhibit significant scatter at [Fe/H] $\lesssim -2$ dex, often interpreted as evidence of inhomogeneous enrichment during the early phases of galaxy evolution Rossi et al. (2021). However, our analysis of observational data reveals that in the range $-3.5 <$ [Fe/H] $< -2$ dex, the [Mg/Fe] versus [Fe/H] distribution is relatively narrow. This finding suggests a low degree of stochastic enrichment in magnesium during these epochs in the Milky Way halo.

astro-ph.GA↗

arXiv2025

The metal-poorest tail of the Galactic halo: hypothesis on its origin from precise spectral analysis

The origin of the Galactic halo is one of the fundamental topics linking the study of galaxy formation and evolution to cosmology. We aim at deriving precise and accurate stellar parameters, Mg abundances, and ages for a sample of metal-poor stars with [Fe/H] $<$ -2 dex from high signal-to-noise and high resolution spectra. We derive effective temperatures from H$α$ profiles using three-dimensional non local thermodynamic equilibrium (3D NLTE) models, and surface gravities and ages from isochrone fitting based on Gaia data. Iron abundances were derived in one-dimensional (1D) NLTE, while Mg abundances were derived in 1D LTE, 1D NLTE, 3D LTE, and 3D NLTE to show the increasing level of accuracy. The stars show a tight trend in the [Mg/Fe] vs [Fe/H] plane with a knee at [Fe/H]$\sim$ -2.8 dex, which indicates a low level of stochasticity. Their location in the Lindblad diagram confirms their belonging to the Galactic halo, but does not show a distinct clustering that might be expected for a merger with a single low-mass galaxy. Comparison with chemical evolution models is also not definitive on whether the sample stars were born in-situ or in accreted low-mass galaxy mergers. We find two plausible explanations for the chemical sequence traced by the stars in the [Mg/Fe] vs [Fe/H] plane. One is that the sample stars originated in the already formed Milky Way, which at that time (12.5 Gyr ago) was already the main galaxy of its Local Group surroundings. Another one is that the sample stars originated in several small galaxies with similar properties, which later merged with the Galaxy. Only accurate spectroscopic analysis such as that done here can reveal trustworthy chemical diagrams required to observe the traces of the Galaxy evolution. Other elements are required to discern between the two hypotheses.

astro-ph.GA↗

arXiv2024

The GALAH survey: Tracing the Milky Way's formation and evolution through RR Lyrae stars

Stellar mergers and accretion events have been crucial in shaping the evolution of the Milky Way (MW). These events have been dynamically identified and chemically characterised using red giants and main-sequence stars. RR Lyrae (RRL) variables can play a crucial role in tracing the early formation of the MW since they are ubiquitous, old (t$\ge$10 Gyr) low-mass stars and accurate distance indicators. We exploited Data Release 3 of the GALAH survey to identify 78 field RRLs suitable for chemical analysis. Using synthetic spectra calculations, we determined atmospheric parameters and abundances of Fe, Mg, Ca, Y, and Ba. Most of our stars exhibit halo-like chemical compositions, with an iron peak around [Fe/H]$\approx -$1.40, and enhanced Ca and Mg content. Notably, we discovered a metal-rich tail, with [Fe/H] values ranging from $-$1 to approximately solar metallicity. This sub-group includes almost ~1/4 of the sample, it is characterised by thin disc kinematics and displays sub-solar $α$-element abundances, marginally consistent with the majority of the MW stars. Surprisingly, they differ distinctly from typical MW disc stars in terms of the s-process elements Y and Ba. We took advantage of similar data available in the literature and built a total sample of 535 field RRLs for which we estimated kinematical and dynamical properties. We found that metal-rich RRLs (1/3 of the sample) likely represent an old component of the MW thin disc. We also detected RRLs with retrograde orbits and provided preliminary associations with the Gaia-Sausage-Enceladus, Helmi, Sequoia, Sagittarius, and Thamnos stellar streams.

astro-ph.GA↗

arXiv2023

Titans metal-poor reference stars II. Red giants and CEMP stars

Representative samples of F-, G-, K-type stars located out of the Solar Neighbourhood has started to be available in spectroscopic surveys. The fraction of metal-poor ([Fe/H]~$\lesssim -0.8$~dex) giants becomes increasingly relevant to far distances. In metal-poor stars, effective temperatures ($T_{\mathrm{eff}}$) based on LTE spectroscopy and on former colour-$T_{\mathrm{eff}}$ relations of still wide use have been reported to be inaccurate. It is necessary to re-calibrate chemical abundances based on these $T_{\mathrm{eff}}$ scales in the multiple available surveys to bring them to the same standard scale for their simultaneous use. For that, a complete sample of standards is required, which so far, is restricted to a few stars with quasi-direct $T_{\mathrm{eff}}$ measurements. We aim at providing a legacy sample of metal-poor standards with proven accurate atmospheric parameters. We add 47 giants to the sample of metal-poor dwarfs of Giribaldi et al. 2021, thereby constituting the Titans metal-poor reference stars. $T_{\mathrm{eff}}$ was derived by 3D non-LTE H$α$ modelling, whose accuracy was tested against interferometry and InfraRed Flux Method (IRFM). Surface gravity (log $g$) was derived by fitting Mg~I~b triplet lines, whose accuracy was tested against asteroseismology. Metallicity was derived using Fe II lines, which was verified to be identical to the [Fe/H] derived from non-LTE spectral synthesis. $T_{\mathrm{eff}}$ from 3D non-LTE H$α$ is equivalent to interferometric and IRFM temperatures within a $\pm$46~K uncertainty. We achieved precision of $\sim$50~K for 34 stars with spectra with the highest S/N. For log $g$, we achieved a total uncertainty of $\pm$0.15~dex. For [Fe/H], we obtained a total uncertainty of $\pm$0.09~dex. We find that the ionization equilibrium of Fe lines under LTE is not valid in metal-poor giants.

astro-ph.SR↗

arXiv2023

Chronology of the chemical enrichment of the old Galactic stellar populations

The Milky Way accreted several smaller satellite galaxies in its history. These mergers added stars and gas to the Galaxy and affected the properties of the pre-existing stellar populations. Stellar chemical abundances and ages are needed to establish the chronological order of events that occur before, during, and after such mergers. We report precise ages ($\sim$6.5%) and chemical abundances for the Titans, a sample of old metal-poor dwarfs and subgiants with accurate atmospheric parameters. We also obtain ages with an average precision of 10% for a selected sample of dwarf stars from the GALAH survey. We used these stars, located within $\sim$1 kiloparsec of the Sun, to analyse the chronology of the chemical evolution of in-situ and accreted metal-poor stellar populations. We determined ages by isochrone fitting. For the Titans, we determined abundances of Mg, Si, Ca, Ti, Ni, Ba, and Eu using spectrum synthesis. The [Mg/Fe] abundances of the GALAH stars were re-scaled to be consistent with the abundances of the Titans. We separated stellar populations by primarily employing chemical abundances and orbits. We find that star formation in the so-called Gaia-Enceladus or Gaia-Sausage galaxy, the last major system to merge with the Milky Way, lasted at least 3 billion years and got truncated 9.6 $\pm$ 0.2 billion years ago. This marks with very high precision the last stage of its merging process. We also identified stars of a heated metal-poor in-situ population with virtually null net rotation, probably disturbed by several of the early Milky Way mergers. We show that this population is more metal rich than Gaia-Enceladus at any time. The sequence of events uncovered in our analysis supports the hypothesis that Gaia-Enceladus truncated the formation of the high-$α$ disc and caused the gas infall that forms the low-$α$ disc, in agreement with theoretical predictions.

astro-ph.GA↗

arXiv2022

The CUBES Science Case

We introduce the scientific motivations for the development of the Cassegrain U-Band Efficient Spectrograph (CUBES) that is now in construction for the Very Large Telescope. The assembled cases span a broad range of contemporary topics across Solar System, Galactic and extragalactic astronomy, where observations are limited by the performance of current ground-based spectrographs shortwards of 400nm. A brief background to each case is presented and specific technical requirements on the instrument design that flow-down from each case are identified. These were used as inputs to the CUBES design, that will provide a factor of ten gain in efficiency for astronomical spectroscopy over 300-405nm, at resolving powers of R~24,000 and ~7,000. We include performance estimates that demonstrate the ability of CUBES to observe sources that are up to three magnitudes fainter than currently possible at ground-ultraviolet wavelengths, and we place its predicted performance in the context of existing facillities.

astro-ph.IM↗

arXiv2022

Detecting weak beryllium lines with CUBES

Beryllium is a light element with one single stable isotope, 9Be, which is a pure product of cosmic-ray spallation in the interstellar medium. Beryllium abundances in late-type stars can be used in studies about evolutionary mixing, Galactic chemical evolution, planet engulfment, and the formation of globular clusters. Some of these uses of Be abundances figure among the science cases of the Cassegrain U-Band Efficient Spectrograph (CUBES), a new near-UV low- and medium-resolution spectrograph under development for the Very Large Telescope. Here, we report on a study about beryllium abundances in extremely metal-poor stars in the context of the phase A of CUBES. Our motivation is to understand the limits for the detection of weak lines in extremely metal-poor stars of low Be abundances. We analyze simulated CUBES observations, performed in medium-resolution mode, based on synthetic spectra for four mock stars with [Fe/H] \leq -3.0. We find that detecting the Be lines is possible in certain cases, but is very challenging and requires high signal-to-noise ratio. Depending on the atmospheric parameters of the target stars, and if signal-to-noise per pixel of about 400 can be achieved, it should be possible to detect Be abundances between log(Be/H) = -13.1 and -13.6, with a typical uncertainty of \pm 0.15 dex. Using CUBES, the required data for such studies can be obtained for stars that are fainter by two magnitudes with respect to what is possible with current instrumentation.

astro-ph.SR↗

arXiv2022

Beryllium abundances in turn-off stars of globular clusters with the CUBES spectrograph

Globular clusters host multiple stellar populations that display star-to-star variation of light elements that are affected by hot hydrogen burning (e.g., He, C, N, O). Several scenarios have been suggested to explain these variations. Most involve multiple star formation episodes, where later generations are born from material contaminated by the nucleosynthetic products of the previous stellar generation(s). One difficulty in the modelling of such scenarios is knowing the extent to which processed and pristine material are mixed. In this context, beryllium abundances measured in turn-off stars of different generations can provide new information. Beryllium originates from cosmic-ray spallation and can only be destroyed inside stars. Beryllium abundances can thus directly measure the degree of pollution of the material that formed stars in globular clusters. Turn-off stars in globular clusters are however faint and such studies are beyond the capabilities of current instrumentation. In this work, we show the progress that the CUBES spectrograph will bring to this area. Our simulations indicate that CUBES will enable the detection of variations of about 0.6 dex in the Be abundances between stars from different generations, in several nearby globular clusters with turn-off magnitude down to $V$ = 18 mag.

astro-ph.SR↗

arXiv2021

Titans metal-poor reference stars. I. Accurate effective temperatures and surface gravities for dwarfs and subgiants from 3D non-LTE H$α$ profiles and Gaia parallaxes

Several large stellar spectroscopic surveys are producing overwhelming amounts of data that can be used for determining stellar atmospheric parameters and chemical abundances. Nonetheless, the accuracy achieved in the derived astrophysical parameters is still insufficient, mainly because of the paucity of adequate calibrators, particularly in the metal-poor regime ([Fe/H] $\leq -$1.0). Here, we introduce the Titans metal-poor reference stars: a sample of 41 dwarf and subgiant stars with accurate parameters. Effective temperatures (Teff) were derived by fitting observed H$α$ profiles with synthetic lines computed using 3D hydrodynamic NLTE models. Surface gravities (logg) were computed using evolutionary tracks and parallaxes from Gaia EDR3. The same methods recover the Teff values of the Gaia benchmark stars, which are mostly based on interferometric measurements, with a 1$σ$ dispersion of $\pm 50$ K. We assume this to be the accuracy of the H$α$ profiles computed from 3D non-LTE models for metal-poor dwarfs and subgiants. We achieved an internal precision typically between 30-40 K, these errors dominated by instrumental effects. The final total uncertainty for the Teff values of the Titans are thus estimated to be of the order of $1\%$. The typical error for logg is $\leq$ 0.04 dex. In addition, we identified a few members of Gaia-Enceladus, of Sequoia, and of the Helmi stream in our sample. These stars can pave the way for the accurate chemical characterization of these Galactic substructures. Using the Titans as reference, large stellar surveys will be able to improve the internal calibration of their astrophysical parameters. Ultimately, this sample will help users of data from Gaia and large surveys in reaching their goal of redefining our understanding of stars, stellar systems, and the Milky Way.

astro-ph.SR↗

arXiv2020

Chemo-kinematic analysis of metal-poor stars with unsupervised machine learning

Metal-poor stars play an import role in the understanding of Galaxy formation and evolution. Evidence of the early mergers that built up the Galaxy might remain in the distributions of abundances, kinematics, and orbital parameters of the stars. In this work, we report on preliminary results of an on-going chemo-kinematic analysis of a sample of metal-poor ([Fe/H] $\leq$ -1.0) stars observed by the GALAH spectroscopic survey. We explored the chemical and orbital data with unsupervised machine learning (hierarchical clustering, k-means cluster analysis and correlation matrices). Our final goal is to find an optimal way to separate different Galactic stellar populations and stellar groups originating from merging events, such as Gaia-Enceladus and Sequoia.

astro-ph.GA↗

arXiv2019

Faint solar analogs: at the limit of no reddening

The flux distribution of solar analogs is required for calculating the spectral albedo of Solar System bodies such as asteroids and trans-Neptunian objects. Ideally a solar analog should be comparably faint as the target of interest, but only few analogs fainter than V = 9 were identified so far. Only atmospheric parameters equal to solar guarantee a flux distribution equal to solar as well, while only photometric colors equal to solar do not. Reddening is also a factor to consider when selecting faint analog candidates. We implement the methodology for identifying faint analogs at the limit of precision allowed by current spectroscopic surveys. We quantify the precision attainable for the atmospheric parameters effective temperature ($T_{eff}$), metallicity ([Fe/H]), surface gravity (log $g$) when derived from moderate low resolution (R=8000) spectra with S/N $\sim 100$. We calibrated $T_{eff}$ and [Fe/H] as functions of equivalent widths of spectral indices by means of the PCA regression. We derive log $g$, mass, radius, and age from the atmospheric parameters, Gaia parallaxes and evolutionary tracks. We obtained $T_{eff}$/[Fe/H]/log $g$ with precision of 97 K/0.06 dex/0.05 dex. We identify five solar analogs with $V\sim10.5$ (located at $\sim135$ pc): HIP 991, HIP 5811, HIP 69477, HIP 55619 and HIP 61835. Other six stars have $T_{eff}$ close to solar but slightly lower [Fe/H]. Our analogs show no evidence of reddening but for four stars, which present $E(B-V) \geq 0.06$ mag, translating to at least a 200 K decrease in photometric $T_{eff}$.

astro-ph.SR↗

arXiv2018

Accurate effective temperature from H$α$ profiles

The determination of stellar effective temperature ($T_{\mathrm{eff}}$) in F, G, and K stars using H$α$ profile fitting is a quite remarkable and powerful tool, because it practically does not depend on other atmospheric parameters and reddening. Nevertheless, this technique is not frequently used because of the complex procedure to recover the profile of broad lines in echelle spectra. As a consequence, tests performed on different models have sometimes provided ambiguous results. We have developed a normalization method for recovering undistorted H$α$ profiles and we have first applied it to spectra acquired with the single order instrument at do Pico dos Dias Observatory to avoid the problem of blaze correction. The continuum location is optimized using an iterative procedure, where the identification of minute telluric features is performed. A set of spectra was acquired with the MUSICOS echelle spectrograph ($R = 40~000$) to independently validate the normalization method. The accuracy of the method and of the 1D + LTE model is determined using coudé/HARPS/MUSICOS spectra of the Sun and a sample of 10 Gaia Benchmark Stars with effective temperature determined from interferometric measurements. We find that the most used solar atlases cannot be used as templates for H$α$ temperature diagnostics without renormalization. The comparison with the Sun shows that $T_{\mathrm{eff}}$ derived with H$α$ profiles from 1D + LTE models underestimate the solar effective temperature by 28 K. Interferometry and Infrared Flux Method show a dependency on metallicity according to the relation $T_{\mathrm{eff}} = T_{\mathrm{eff}}^{Hα}$ $-159$[Fe/H] + 28 K within the metallicity range $-0.7$ to $+0.45$ dex. We find 3D models largely improve the agreement with the interferometric and Infrared Flux Method measurements.

astro-ph.SR↗