arXiv subjects

Riccardo Arpaia

Publications and source records attributed to Riccardo Arpaia.

27 records · Page 2Linked to original sources

arXiv2019

Fabrication and electrical transport characterization of high quality underdoped YBa$_2$Cu$_3$O$_{7-δ}$ nanowires

We present the fabrication and electrical transport characterization of underdoped YBa$_2$Cu$_3$O$_{7-δ}$ nanowires. The nanowires have been realized without any protective capping layer and they show transport properties similar to those of the parent thin film, demonstrating that they have not been damaged by the nanopatterning. The current-voltage characteristics of the underdoped nanowires show large hysteretic voltage switching at the critical current, in contrast to the flux-flow like characteristics of optimally doped nanostructures, indicating the formation of a self-stabilizing hot spot. These results open up new possibilities of using the underdoped nanowires for single photon detection and for exploring the underdoped side of the YBa$_2$Cu$_3$O$_{7-δ}$ phase diagram at the nanoscale.

cond-mat.supr-con↗

arXiv2019

SQUID magnetometer based on Grooved Dayem nanobridges and a flux transformer

We report noise measurements performed on a SQUID magnetometer implementing Grooved Dayem nanobridge of YBCO as weak-links. The SQUID shows magnetic flux noise as low as 10 $μΦ_0$/Hz$^{0.5}$. The magnetometer is realized by coupling the SQUID to a flux transformer with a two-level coupling scheme using a flip-chip approach. This improves the effective area of the SQUID and result in a magnetic field noise of 50 fT/Hz$^{0.5}$ at T=77 K.

cond-mat.supr-con↗

arXiv2019

Grooved Dayem nanobridges as building blocks of high-performance YBa$_2$Cu$_3$O$_{7-δ}$ SQUID magnetometers

We present noise measurements performed on a YBa$_2$Cu$_3$O$_{7-δ}$ nanoscale weak-link-based magnetometer consisting of a Superconducting QUantum Interference Device (SQUID) galvanically coupled to a $3.5 \times 3.5~$mm$^2$ pick-up loop, reaching white flux noise levels and magnetic noise levels as low as $6~μΦ_0 / \sqrt{\mathrm{Hz}}$ and $100$~fT/$\sqrt{\mathrm{Hz}}$ at $T=77$~K, respectively. The low noise is achieved by introducing Grooved Dayem Bridges (GDBs), a new concept of weak-link. A fabrication technique has been developed for the realization of nanoscale grooved bridges, which substitutes standard Dayem bridge weak links. The introduction of these novel key blocks reduces the parasitic inductance of the weak links and increases the differential resistance of the SQUIDs. This greatly improves the device performance, thus resulting in a reduction of the white noise.

cond-mat.supr-con↗

arXiv2019

Experimental Determination of Momentum-Resolved Electron-Phonon Coupling

We provide a novel experimental method to quantitatively estimate the electron-phonon coupling and its momentum dependence from resonant inelastic x-ray scattering (RIXS) spectra based on the detuning of the incident photon energy away from an absorption resonance. We apply it to the cuprate parent compound NdBa$_2$Cu$_3$O$_6$ and find that the electronic coupling to the oxygen half-breathing phonon mode is strongest at the Brillouin zone boundary, where it amounts to $\sim 0.17$ eV, in agreement with previous studies. In principle, this method is applicable to any absorption resonance suitable for RIXS measurements and will help to define the contribution of lattice vibrations to the peculiar properties of quantum materials.

cond-mat.supr-con↗

arXiv2018

Induced unconventional superconductivity on the surface states of Bi$_2$Te$_3$ topological insulator

Topological superconductivity is central to a variety of novel phenomena involving the interplay between topologically ordered phases and broken-symmetry states. The key ingredient is an unconventional order parameter, with an orbital component containing a chiral $p_x$ + i$p_y$ wave term. Here we present phase-sensitive measurements, based on the quantum interference in nanoscale Josephson junctions, realized by using Bi$_2$Te$_3$ topological insulator. We demonstrate that the induced superconductivity is unconventional and consistent with a sign-changing order parameter, such as a chiral $p_x$ + i$p_y$ component. The magnetic field pattern of the junctions shows a dip at zero externally applied magnetic field, which is an incontrovertible signature of the simultaneous existence of 0 and $π$ coupling within the junction, inherent to a non trivial order parameter phase. The nano-textured morphology of the Bi$_2$Te$_3$ flakes, and the dramatic role played by thermal strain are the surprising key factors for the display of an unconventional induced order parameter.

cond-mat.supr-con↗

arXiv2017

Probing the phase diagram of cuprates with YBa$_2$Cu$_3$O$_{7-δ}$ thin films and nanowires

We have grown and characterized 30 nm thick YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) films, deposited by pulsed laser deposition on both MgO (110) and SrTiO$_3$ (001) substrates, which induce opposite strain to the superconducting layer. By carefully tuning the in-situ post-annealing oxygen pressure, we achieved, in a reproducible way, films at different oxygen doping, spanning from the slightly overdoped down to the strongly underdoped region of the phase diagram. The transport properties of the films, investigated through resistance versus temperature measurements, are in perfect qualitative agreement with single crystals. Starting from these films, we have also successfully fabricated nanowires with widths down to 65 nm, at different oxygen doping. The nanostructures exhibit characteristic temperatures (as the critical temperature $T_{\mathrm{c}}$ and the pseudogap temperature $T^*$) similar to those of the as-grown films and carry critical current densities $J_{\mathrm{c}}$ close to the critical depairing value, limited by vortex entry. This implies that the superconducting and the normal state properties of underdoped YBCO are preserved in our films, and they can be studied as a function of the dimensionality of the system, down to the nanoscale.

cond-mat.supr-con↗

arXiv2017

Transport properties of ultrathin YBa$_2$Cu$_3$O$_{7-δ}$ nanowires: a route to single photon detection

We report on the growth and characterization of ultrathin YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) films on MgO (110) substrates, which exhibit superconducting properties at thicknesses down to 3 nm. YBCO nanowires, with thicknesses down to 10 nm and widths down to 65 nm, have been also successfully fabricated. The nanowires protected by a Au capping layer show superconducting properties close to the as-grown films, and critical current densities, which are only limited by vortex dynamics. The 10 nm thick YBCO nanowires without the Au capping present hysteretic current voltage characteristics, characterized by a voltage switch which drives the nanowires directly from the superconducting to the normal state. Such bistability is associated in NbN nanowires to the presence of localized normal domains within the superconductor. The presence of the voltage switch, in ultrathin nanostructures characterized by high sheet resistance values, though preserving high quality superconducting properties, make our nanowires very attractive devices to engineer single photon detectors.

cond-mat.supr-con↗

arXiv2014

Ultra low noise YBCO nanoSQUIDs implementing nanowires

We present results on ultra low noise YBa$_2$Cu$_3$O$_{7-δ}$ nano Superconducting QUantum Interference Devices (nanoSQUIDs). To realize such devices, we implemented high quality YBCO nanowires, working as weak links between two electrodes. We observe critical current modulation as a function of an externally applied magnetic field in the full temperature range below the transition temperature $T_C$. The white flux noise below 1 $μΦ_0/\sqrt{\mathrm{Hz}}$ at T = 8 K makes our nanoSQUIDs very attractive for the detection of small spin systems.

cond-mat.supr-con↗

arXiv2013

Josephson-like behavior in YBa$_2$Cu$_3$O$_{7-δ}$ nano-bridges carrying the depairing current

We have investigated the zero-field critical supercurrent of YBa$_2$Cu$_3$O$_{7-δ}$ bridges patterned from 50 nm thick films as a function of bridge width, ranging from 2 $μ$m to 50 nm. The critical current density monotonically increases for decreasing bridge width even for widths smaller than the Pearl length. This behavior is accounted for by considering current crowding effects at the junction between the bridge and the wider electrodes. Comparison to numerical calculations of the current distributions in our bridge geometries of various widths yields a (local) critical current density at 4.2 K of $1.3\times 10^8$ A/cm$^2$, the Ginzburg Landau depairing current density. The observation of up to 160 Shapiro-like steps in the current voltage characteristics under microwave irradiation substantiates the pristine character of our nano bridges with cross sections as small as $50\times 50$ nm$^2$.

cond-mat.supr-con↗