arXiv subjects

Riccardo Claudi

Publications and source records attributed to Riccardo Claudi.

At least 19 recordsLinked to original sources

arXiv2026

The SOXS Spectrograph Instrument Control Software

SOXS (Son Of X-Shooter) is a new spectrograph for the European Southern Observatory (ESO), recently installed at the New Technology Telescope (NTT) at the La Silla Observatory, Chile. The main instrument goal consists in the characterization of transient sources, based on alerts. It covers from (partially) ultra-violet to visible and near-infrared bands, with a spectral resolution of R $\sim 4500$, using two separate, wavelength-optimized spectrographs. A scientific grade visible camera, primarily intended for target acquisition, also provides a "light imaging" mode. In this paper, we present the design of the SOXS Instrument Control Software, which is in charge of controlling all motors, calibration lamps and detectors, monitoring sensors and components' status, coordinating the execution of exposures, and implementing all observation, calibration and maintenance procedures. Given the extensive experience of the SOXS consortium in the development of instruments for the ESO Very Large Telescope (VLT), we decided to base the design of the Control System on the same standards, both for hardware and software control. We illustrate the control network, the instrument functions and detectors to be controlled, the overall design of SOXS Instrument Software (INS) and its main components. Then, we provide details about the control software for the most SOXS-specific components, and peculiar features: the piezoelectric tip-tilt corrector used for active compensation of mechanical flexures of the instrument; the cryogenic piezoelectric slit exchanger for the NIR spectrograph; the co-rotator monitoring system; and the control of the Commercial-Off-the-Shelf (COTS)- based imaging camera.

astro-ph.IM↗

arXiv2025

Exo-MerCat v2.0.0: updates and open-source release of the Exoplanet Merged Catalog software

Exoplanet research is at the forefront of contemporary astronomy recommendations. As more and more exoplanets are discovered and vetted, databases and catalogs are built to collect information. Various resources are available to scientists for this purpose, though every one of them has different scopes and notations. In Alei et al. (2020) we described Exo-MerCat, a script that collects information from multiple sources and creates a homogenized table. In this manuscript, we announce the release of the Exo-MerCat v2.0.0 script as an upgraded, tested, documented and open-source software to produce catalogs. The main upgrades on the script concern: 1) the addition of the TESS Input Catalog and the K2 Input Catalog as input sources; 2) the optimization of the main identifier queries; 3) a more complex merging of the entries from the input sources into the final catalog; 4) some quality-of-life improvements such as informative flags, more user-friendly column headers, and log files; 5) the refactoring of the code in modules. We compare the performance of Exo-MerCat v2.0.0 with the previous version and notice a substantial improvement in the completeness of the sample, thanks to the addition of new input sources, and its accuracy, because of the optimization of the script.

astro-ph.IM↗

arXiv2025

High-Contrast Imaging: Hide and Seek with Exoplanets

So far, most of the about 5700 exoplanets have been discovered mainly with radial velocity and transit methods. These techniques are sensitive to planets in close orbits, not being able to probe large star--planet separations. $μ$-lensing is the indirect method that allows us to probe the planetary systems at the snow-line and beyond, but it is not a repeatable observation. On the contrary, direct imaging (DI) allows for the detection and characterization of low mass companions at wide separation (\mbox{$\leq$ 5--6 au}). The main challenge of DI is that a typical planet--star contrast ranges from $10^{-6}$, for a young Jupiter in emitted light, to $10^{-9}$ for Earth in reflected light. In the last two decades, a lot of efforts have been dedicated to combining large (D $\geq$ 5 m) telescopes (to reduce the impact of diffraction) with coronagraphs and high-order adaptive optics (to correct phase errors induced by atmospheric turbulence), with sophisticated image post-processing, to reach such a contrast between the star and the planet in order to detect and characterize cooler and closer companions to nearby stars. Building on the first pioneering instrumentation, the second generation of high-contrast imagers, SPHERE, GPI, and SCExAO, allowed us to probe hundreds of stars (e.g., 500--600 stars using SHINE and GPIES), contributing to a better understanding of the demography and the occurrence of planetary systems. The DI offers a possible clear vision for studying the formation and physical properties of gas giant planets and brown dwarfs, and the future DI (space and ground-based) instruments with deeper detection limits will enhance this vision. In this paper, we briefly review the methods, the instruments, the main sample of targeted stars, the remarkable results, and the perspective of this rising technique.

astro-ph.IM↗

arXiv2024

Automated scheduler for the SOXS instrument: design and performance

We present the advancements in the development of the scheduler for the Son Of X-shooter instrument at the ESO-NTT 3.58-m telescope in La Silla, Chile. SOXS is designed as a single-object spectroscopic facility and features a high-efficiency spectrograph with two arms covering the spectral range of 350-2000 nm and a mean resolving power of approximately R=4500. It will conduct UV-visible and near-infrared follow-up observations of astrophysical transients, drawing from a broad pool of targets accessible through the streaming services of wide-field telescopes, both current and future, as well as high-energy satellites. The instrument will cater to various scientific objectives within the astrophysical community, each entailing specific requirements for observation planning. SOXS will operate at the European Southern Observatory (ESO) in La Silla, without the presence of astronomers on the mountain. This poses a unique challenge for the scheduling process, demanding a fully automated algorithm that is autonomously interacting with the appropriate databases and the La Silla Weather API, and is capable of presenting the operator not only with an ordered list of optimal targets (in terms of observing constraints) but also with optimal backups in the event of changing weather conditions. This imposes the necessity for a scheduler with rapid-response capabilities without compromising the optimization process, ensuring the high quality of observations and best use of the time at the telescope. We thus developed a new highly available and scalable architecture, implementing API Restful applications like Docker Containers, API Gateway, and Python-based Flask frameworks. We provide an overview of the current state of the scheduler, which is now ready for the approaching on-site testing during Commissioning phase, along with insights into its web interface and preliminary performance tests.

astro-ph.IM↗

arXiv2024

The SOXS Instrument Control Software approaching the PAE

The Instrument Control Software of SOXS (Son Of X-Shooter), the forthcoming spectrograph for the ESO New Technology Telescope at the La Silla Observatory, has reached a mature state of development and is approaching the crucial Preliminary Acceptance in Europe phase. Now that all the subsystems have been integrated in the laboratories of the Padova Astronomical Observatory, the team operates for testing purposes with the whole instrument at both engineering and scientific level. These activities will make use of a set of software peculiarities that will be discussed in this contribution. In particular, we focus on the synoptic panel, the co-rotator system special device, on the Active Flexure Compensation system which controls two separate piezo tip-tilt devices.

astro-ph.IM↗

arXiv2024

The status of the NIR arm of the SOXS Instrument toward the PAE

The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory [1]. It offers a simultaneous spectral coverage over 350-2000 nm, with two separate spectrographs. In this paper we present the status of the Near InfraRed (NIR) cryogenic echelle cross-dispersed spectrograph [1], in the range 0.80-2.00 μm with 15 orders, equipped with an 2k x 2k Hawaii H2RG IR array from Teledyne, working at 40K, that is currently assembled and tested on the SOXS instrument, in the premises of INAF in Padova. We describe the different tests and results of the cryo, vacuum, opto-mechanics and detector subsystems that finally will be part of the PAE by ESO.

astro-ph.IM↗

arXiv2024

What is your favorite transient event? SOXS is almost ready to observe!

The Son Of X-Shooter (SOXS) will be the specialized facility to observe any transient event with a flexible scheduler at the ESO New Technology Telescope (NTT) at La Silla, Chile. SOXS is a single object spectrograph offering simultaneous spectral coverage in UV-VIS (350-850 nm) and NIR (800-2000 nm) wavelength regimes with an average of R~4500 for a 1arcsec slit. SOXS also has imaging capabilities in the visible wavelength regime. Currently, SOXS is being integrated at the INAF-Astronomical Observatory of Padova. Subsystem- and system-level tests and verification are ongoing to ensure and confirm that every requirement and performance are met. In this paper, we report on the integration and verification of SOXS as the team and the instrument prepare for the Preliminary Acceptance Europe (PAE).

astro-ph.IM↗

arXiv2024

The integration of the SOXS control electronics towards the PAE

SOXS (Son Of X-Shooter) is the new single object spectrograph for the ESO New Technology Telescope (NTT) at the La Silla Observatory, able to cover simultaneously both the UV-VIS and NIR bands (350-2000 nm). The instrument is currently in the integration and test phase, approaching the Preliminary Acceptance in Europe (PAE) before shipment to Chile for commissioning. After the assembly and preliminary test of the control electronics at INAF - Astronomical Observatory of Capodimonte (Napoli), the two main control cabinets of SOXS are now hosted in Padova, connected to the real hardware. This contribution describes the final electronic cabinets layout, the control strategy and the different integration phases, waiting for the Preliminary Acceptance in Europe and the installation of the instrument in Chile.

astro-ph.IM↗

arXiv2023

Oxygenic photosynthetic responses of cyanobacteria exposed under an M-dwarf starlight simulator: Implications for exoplanet's habitability

Introduction: The search for life on distant exoplanets is expected to rely on atmospheric biosignatures detection, such as oxygen of biological origin. However, it is not demonstrated how much oxygenic photosynthesis, which on Earth depends on visible light, could work under spectral conditions simulating exoplanets orbiting the Habitable Zone of M-dwarf stars, which have low light emission in the visible and high light emission in the far-red/near-infrared. By utilizing cyanobacteria, the first organisms to evolve oxygenic photosynthesis on our planet, and a starlight simulator capable of accurately reproducing the emission spectrum of an M-dwarf in the range 350-900 nm, we could answer this question. Methods: We performed experiments with the cyanobacterium Chlorogloeopsis fritschii PCC6912, capable of Far-Red Light Photoacclimation (FaRLiP), which allows the strain to harvest far-red in addition to visible light for photosynthesis, and Synechocystis sp. PCC6803, a species unable to perform this photoacclimation, comparing their responses when exposed to three simulated light spectra: M-dwarf, solar and far-red. We analysed growth and photosynthetic acclimation features in terms of pigment composition and photosystems organization. Finally, we determined the oxygen production of the strains directly exposed to the different spectra. Results: Both cyanobacteria were shown to grow and photosynthesize similarly under M-dwarf and solar light conditions: Synechocystis sp. by utilizing the few photons in the visible, C. fritschii by harvesting both visible and far-red light, activating the FaRLiP response.

astro-ph.EP↗

arXiv2022

Laboratory test of the VIS detector system of SOXS for the ESO-NTT telescope

SOXS is the new spectrograph for the ESO NTT telescope able to cover the optical and NIR bands thanks to two different arms: the UV-VIS (350-850 nm), and the NIR (800-2000 nm). In this article, we describe the final design of the visible camera cryostats, the test facilities for the CCD characterization, and the first results with the scientific detector. The UV-VIS detector system is based on a e2v CCD 44-82, a custom detector head coupled with the ESO Continuous Flowing Cryostat (CFC) cooling system and the New General Detector Controller (NGC) developed by ESO. The laboratory facility is based on an optical bench equipped with a Xenon lamp, filter wheels to select the wavelength, an integrating sphere, and a calibrated diode to measure the flux. This paper outlines the visible camera cryostat, the test facilities for the CCD characterization and the first results with the scientific detector in the laboratory and after the integration to the instrument.

astro-ph.IM↗

arXiv2022

Dynamic scheduling for SOXS instrument: environment, algorithms and development

We present development progress of the scheduler for the Son Of X-Shooter (SOXS) instrument at the ESO-NTT 3.58 meter telescope. SOXS will be a single object spectroscopic facility, consisting of a two-arms high-efficiency spectrograph covering the spectral range 350-2000 nanometer with a mean resolving power R$\approx$4500. SOXS will be uniquely dedicated to the UV-visible and near infrared follow up of astrophysical transients, with a very wide pool of targets available from the streaming services of wide-field telescopes, current and future. This instrument will serve a variety of scientific scopes in the astrophysical community, with each scope eliciting its specific requirements for observation planning, that the observing scheduler has to meet. Due to directions from the European Southern Observatory (ESO), the instrument will be operated only by La Silla staff, with no astronomer present on the mountain. This implies a new challenge for the scheduling process, requiring a fully automated algorithm that should be able to present the operator not only with and ordered list of optimal targets, but also with optimal back-ups, should anything in the observing conditions change. This imposes a fast-response capability to the scheduler, without compromising the optimization process, that ensures good quality of the observations. In this paper we present the current state of the scheduler, that is now almost complete, and of its web interface.

astro-ph.IM↗

arXiv2022

The Quality Check system architecture for Son-Of-X-Shooter SOXS

We report the implemented architecture for monitoring the health and the quality of the Son Of X-Shooter (SOXS) spectrograph for the New Technology Telescope in La Silla at the European Southern Observatory. Briefly, we report on the innovative no-SQL database approach used for storing time-series data that best suits for automatically triggering alarm, and report high-quality graphs on the dashboard to be used by the operation support team. The system is designed to constantly and actively monitor the Key Performance Indicators (KPI) metrics, as much automatically as possible, reducing the overhead on the support and operation teams. Moreover, we will also detail about the interface designed to inject quality checks metrics from the automated SOXS Pipeline (Young et al. 2022).

astro-ph.IM↗

arXiv2022

Progress on the SOXS NIR Spectrograph AIT

The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory, ranging from 350 to 2000 nm. In this paper, we present the progress in the AIT phase of the Near InfraRed (NIR) arm. We describe the different AIT phases of the cryo, vacuum, opto-mechanics and detector subsystems, that finally converged at the INAF-OAB premises in Merate (Italy), where the NIR spectrograph is currently being assembled and tested, before the final assembly on SOXS.

astro-ph.IM↗

arXiv2022

SOXS AIT: a paradigm for system engineering of a medium class telescope instrument

SOXS (SOn of X-Shooter) is a high-efficiency spectrograph with a mean Resolution-Slit product of 3500 over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph and the Acquisition Camera) connected by the Common Path system to the NTT, and the Calibration Unit. We present an overview of the flow from the scientific to the technical requirements, and the realization of the sub-systems. Further, we give an overview of the methodologies used for planning and managing the assembly of the sub-systems, their integration and tests before the acceptance of the instrument in Europe (PAE) along with the plan for the integration of SOXS to the NTT. SOXS could be used as an example for the system engineering of an instrument of moderate complexity, with a large geographic spread of the team.

astro-ph.IM↗

arXiv2022

The Son-Of-X-shooter (SOXS) Data-Reduction Pipeline

The Son-Of-XShooter (SOXS) is a single object spectrograph (UV-VIS & NIR) and acquisition camera scheduled to be mounted on the ESO 3.58-m New Technology Telescope at the La Silla Observatory. Although the underlying data reduction processes to convert raw detector data to fully-reduced science ready data are complex and multi-stepped, we have designed the SOXS Data Reduction pipeline with the core aims of providing end-users with a simple-to-use, well-documented command-line interface while also allowing the pipeline to be run in a fully automated state; streaming reduced data into the ESO Science Archive Facility without need for human intervention. To keep up with the stream of data coming from the instrument, there is the requirement to optimise the software to reduce each observation block of data well within the typical observation exposure time. The pipeline is written in Python 3 and has been built with an agile development philosophy that includes CI and adaptive planning.

astro-ph.IM↗

arXiv2022

From Assembly to the Complete Integration and Verification of the SOXS Common Path

The Son Of X-Shooter (SOXS) is a single object spectrograph offering simultaneous spectral coverage in UV-VIS (350-850 nm) and NIR (800-2000 nm) wavelength regimes with an average of R close to 4500 for a 1 slit. SOXS also has imaging capabilities in the visible wavelength regime. It is designed and optimized to observe all kinds of transients and variable sources. The final destination of SOXS is the Nasmyth platform of the ESO NTT at La Silla, Chile. The SOXS consortium has a relatively large geographic spread, and therefore the Assembly Integration and Verification (AIV) of this medium-class instrument follows a modular approach. Each of the five main sub-systems of SOXS, namely the Common Path, the Calibration Unit, the Acquisition Camera, the UV-VIS Spectrograph, and the NIR Spectrograph, are undergoing (or undergone) internal alignment and testing in the respective consortium institutes. INAF-Osservatorio Astronomico di Padova delivers the Common Path sub-system, the backbone of the entire instrument. We report the Common Path internal alignment starting from the assembly of the individual components to the final testing of the optical quality, and the efficiency of the complete sub-system.

astro-ph.IM↗

arXiv2021

Five carbon- and nitrogen-bearing species in a hot giant planet's atmosphere

The atmospheres of gaseous giant exoplanets orbiting close to their parent stars (hot Jupiters) have been probed for nearly two decades. They allow us to investigate the chemical and physical properties of planetary atmospheres under extreme irradiation conditions. Previous observations of hot Jupiters as they transit in front of their host stars have revealed the frequent presence of water vapour and carbon monoxide in their atmospheres; this has been studied in terms of scaled solar composition under the usual assumption of chemical equilibrium. Both molecules as well as hydrogen cyanide were found in the atmosphere of HD 209458b, a well studied hot Jupiter (with equilibrium temperature around 1,500 kelvin), whereas ammonia was tentatively detected there and subsequently refuted. Here we report observations of HD 209458b that indicate the presence of water (H2O), carbon monoxide (CO), hydrogen cyanide (HCN), methane (CH4), ammonia (NH3) and acetylene (C2H2), with statistical significance of 5.3 to 9.9 standard deviations per molecule. Atmospheric models in radiative and chemical equilibrium that account for the detected species indicate a carbon-rich chemistry with a carbon-to-oxygen ratio close to or greater than 1, higher than the solar value (0.55). According to existing models relating the atmospheric chemistry to planet formation and migration scenarios, this would suggest that HD 209458b formed far from its present location and subsequently migrated inwards. Other hot Jupiters may also show a richer chemistry than has been previously found, which would bring into question the frequently made assumption that they have solar-like and oxygen-rich compositions.

astro-ph.EP↗

arXiv2020

The SOXS scheduler for remote operation at LaSilla:Concept and design

In this paper we present the SOXS Scheduler, a web-based application aimed at optimising remote observations at the NTT-ESO in the context of scientific topics of both the SOXS Consortium and regular ESO proposals.This paper will give details of how detected transients from various surveys are inserted, prioritised, and selected for observations with SOXS at the NTT while keeping the correct sharing between GTO time (for the SOXSConsortium) and the regularly approved observing time from ESO proposals. For the 5-years of operation ofSOXS this vital piece of software will provide a night-by-night dynamical schedule, allowing the user to face rapid changes during the operations that might come from varying weather conditions or frequent target of opportunity (ToO) observations that require a rapid response. The scheduler is developed with high available and scalable architecture in mind and it implements the state-of-the-art technologies for API Restful application like Docker Containers, API Gateway, and Python-based Flask frameworks.

astro-ph.IM↗