arXiv subjects

Riccardo Sapienza

Publications and source records attributed to Riccardo Sapienza.

At least 37 records · Page 2Linked to original sources

arXiv2022

Double-slit time diffraction at optical frequencies

The wave nature of light is revealed by diffraction from physical structures. We report a time-domain version of the classic Young's double-slit experiment: a beam of light twice gated in time produces an interference in the frequency spectrum. The 'time slits', narrow enough to produce diffraction at optical frequencies, are generated from a thin film of Indium-Tin-Oxide illuminated with high-power infrared pulses, inducing a fast reflectivity rise, followed by a slower decay. Separation between the time slits determines the period of oscillations in the frequency spectrum, while the decay of fringe visibility in frequency reveals the shape of the time slits. Here we find a surprise: many more oscillations are visible than expected from existing theory, implying a rise time for the leading edge of around 1-10 fs, approaching an optical cycle of 4.4 fs. This is over an order of magnitude faster than the width of the pump and can be inferred from the decay of the frequency oscillations.

physics.optics↗

arXiv2022

Sensitivity and spectral control of network lasers

Recently, random lasing in complex networks has shown efficient lasing over more than 50 localised modes, promoted by multiple scattering over the underlying graph. If controlled, these network lasers can lead to fast-switching multifunctional light sources with synthesised spectrum. Here, we observe both in experiment and theory high sensitivity of the network laser to the spatial shape of the pump profile, with mode intensity variation of up to 280% for a non-homogeneous 7% pump decrease. We solve the nonlinear equations within the steady state ab-initio laser theory (SALT) approximation over a graph and we show selective lasing of around 90% of the top modes, effectively programming the spectrum of the lasing networks. In our experiments with polymer networks, this high sensitivity enables control of the lasing spectrum through non-uniform pump patterns. We propose the underlying complexity of the network modes as the key element behind efficient spectral control opening the way for the development of optical devices with wide impact for on-chip photonics for communication, sensing and computation.

physics.optics↗

arXiv2022

Self-organized lasers of reconfigurable colloidal assemblies

Biological cells self-organize into living materials that uniquely blend structure with functionality and responsiveness to the environment. The integration of similar life-like features in man-made materials remains challenging, yet desirable to manufacture active, adaptive and autonomous systems. Here we show the self-organization of programmable random lasers from the reversible out-of-equilibrium self-assembly of colloids. Random lasing originates from the optical amplification of light undergoing multiple scattering within the dissipative colloidal assemblies and therefore is crucially dependent on their self-organization behavior. Under external light stimuli, these dynamic random lasers are responsive and present a continuously tunable laser threshold. They can thus reconfigure and cooperate by emulating the ever-evolving spatiotemporal relationship between structure and functionality typical of living matter.

cond-mat.soft↗

arXiv2021

Photonics of Time-Varying Media

Time-varying media have recently emerged as a new paradigm for wave manipulation, thanks to thesynergy between the discovery of novel, highly nonlinear materials, such as epsilon-near-zero materials, and the questfor novel wave applications, such as magnet-free nonreciprocity, multi-mode light shaping, and ultrafast switching. Inthis review we provide a comprehensive discussion of the recent progress achieved with photonic metamaterials whoseproperties stem from their modulation in time. We review the basic concepts underpinning temporal switching and itsrelation with spatial scattering, and deploy the resulting insight to review photonic time-crystals and their emergentresearch avenues such as topological and non-Hermitian physics. We then extend our discussion to account for spa-tiotemporal modulation and its applications to nonreciprocity, synthetic motion, giant anisotropy, amplification andother effects. Finally, we conclude with a review of the most attractive experimental avenues recently demonstrated,and provide a few perspectives on emerging trends for future implementations of time-modulation in photonics.

physics.optics↗

arXiv2021

Bright single photon emitters with enhanced quantum efficiency in a two-dimensional semiconductor coupled with dielectric nano-antennas

Single photon emitters in atomically-thin semiconductors can be deterministically positioned using strain induced by underlying nano-structures. Here, we couple monolayer WSe$_2$ to high-refractive-index gallium phosphide dielectric nano-antennas providing both optical enhancement and monolayer deformation. For single photon emitters formed on such nano-antennas, we find very low (femto-Joule) saturation pulse energies and up to 10$^4$ times brighter photoluminescence than in WSe$_2$ placed on low-refractive-index SiO$_2$ pillars. We show that the key to these observations is the increase on average by a factor of 5 in the quantum efficiency of the emitters coupled to the nano-antennas. This further allowed us to gain new insights into their photoluminescence dynamics, revealing the roles of the dark exciton reservoir and Auger processes. We also find that the coherence time of such emitters is limited by intrinsic dephasing processes. Our work establishes dielectric nano-antennas as a platform for high-efficiency quantum light generation in monolayer semiconductors.

cond-mat.mes-hall↗

arXiv2021

Template Dissolution Interfacial Patterning of Single Colloids for Nanoelectrochemistry and Nanosensing

Deterministic positioning and assembly of colloidal nanoparticles (NPs) onto substrates is a core requirement and a promising alternative to top down lithography to create functional nanostructures and nanodevices with intriguing optical, electrical, and catalytic features. Capillary-assisted particle assembly (CAPA) has emerged as an attractive technique to this end, as it allows controlled and selective assembly of a wide variety of NPs onto predefined topographical templates using capillary forces. One critical issue with CAPA, however, lies in its final printing step, where high printing yields are possible only with the use of an adhesive polymer film. To address this problem, we have developed a template dissolution interfacial patterning (TDIP) technique to assemble and print single colloidal AuNP arrays onto various dielectric and conductive substrates in the absence of any adhesion layer, with printing yields higher than 98%. The TDIP approach grants direct access to the interface between the AuNP and the target surface, enabling the use of colloidal AuNPs as building blocks for practical applications. The versatile applicability of TDIP is demonstrated by the creation of direct electrical junctions for electro- and photoelectrochemistry and nanoparticle-on-mirror geometries for single particle molecular sensing.

cond-mat.soft↗

arXiv2021

Dielectric nano-antennas for strain engineering in atomically thin two-dimensional semiconductors

Atomically thin two-dimensional semiconducting transition metal dichalcogenides (TMDs) can withstand large levels of strain before their irreversible damage occurs. This unique property offers a promising route for control of the optical and electronic properties of TMDs, for instance by depositing them on nano-structured surfaces, where position-dependent strain can be produced on the nano-scale. Here, we demonstrate strain-induced modifications of the optical properties of mono- and bilayer TMD WSe$_2 $ placed on photonic nano-antennas made from gallium phosphide (GaP). Photoluminescence (PL) from the strained areas of the TMD layer is enhanced owing to the efficient coupling with the confined optical mode of the nano-antenna. Thus, by following the shift of the PL peak, we deduce the changes in the strain in WSe$_2$ deposited on the nano-antennas of different radii. In agreement with the presented theory, strain up to $\approx 1.4 \%$ is observed for WSe$_2$ monolayers. We also estimate that $>3\%$ strain is achieved in bilayers, accompanied with the emergence of a direct bandgap in this normally indirect-bandgap semiconductor. At cryogenic temperatures, we find evidence of the exciton confinement in the most strained nano-scale parts of the WSe$_2$ layers, as also predicted by our theoretical model. Our results, of direct relevance for both dielectric and plasmonic nano-antennas, show that strain in atomically thin semiconductors can be used as an additional parameter for engineering light-matter interaction in nano-photonic devices.

cond-mat.mes-hall↗

arXiv2020

Dye stabilization and wavelength tunability in lasing fibers based on DNA

Lasers based on biological materials are attracting an increasing interest in view of their use in integrated and transient photonics. DNA as optical biopolymer in combination with highly-emissive dyes has been reported to have excellent potential in this respect, however achieving miniaturized lasing systems based on solid-state DNA shaped in different geometries to confine and enhance emission is still a challenge, and physico-chemical mechanisms originating fluorescence enhancement are not fully understood. Herein, a class of wavelength-tunable lasers based on DNA nanofibers is demonstrated, for which optical properties are highly controlled through the system morphology. A synergistic effect is highlighted at the basis of lasing action. Through a quantum chemical investigation, we show that the interaction of DNA with the encapsulated dye leads to hindered twisting and suppressed channels for the non-radiative decay. This is combined with effective waveguiding, optical gain, and tailored mode confinement to promote morphologically-controlled lasing in DNA-based nanofibers. The results establish design rules for the development of bright and tunable nanolasers and optical networks based on DNA nanostructures.

physics.optics↗

arXiv2020

Electrical control of single-photon emission in highly-charged individual colloidal quantum dots

Electron transfer to an individual quantum dot promotes the formation of charged excitons with enhanced recombination pathways and reduced lifetimes. Excitons with only one or two extra charges have been observed and exploited for very efficient lasing or single quantum dot LEDs. Here, by room-temperature time-resolved experiments on individual giant-shell CdSe/CdS quantum dots, we show the electrochemical formation of highly charged excitons containing more than twelve electrons and one hole. We report the control over intensity blinking, along with a deterministic manipulation of quantum dot photodynamics, with an observed 210-fold increase of the decay rate, accompanied by 12-fold decrease of the emission intensity, while preserving single-photon emission characteristics. These results pave the way for deterministic control over the charge state, and room-temperature decay-rate engineering for colloidal quantum dot-based classical and quantum communication technologies.

physics.optics↗

arXiv2020

Protein-based microsphere biolasers fabricated by dehydration

Biolasers made of biological materials have attracted a great of research attention due to their biocompatibility and biodegradability, which have the potential for biosensors and biointegration. However, the current fabrication method of biolasers suffers several limitations such as complicated processes, time-consuming and environmental unfriendly. In this work, a novel approach with green processes for fabricating solid-state microspheres biolasers is demonstrated. By using dehydration via a modified MicroglassificationTM technology, dye-doped bovine serum albumin (BSA) droplets can quickly (less than 10 minutes) and easily turn into solid microspheres with the diameter ranging from 10-150 μm. The size of the microspheres can be effectively controlled by changing either the concentration of BSA solution or the diameter of the initial droplets. Fabricated microspheres can act as efficient microlasers under optical pulse excitation. Lasing threshold of 7.8 μJ mm-2 and quality (Q) factor of about 1700 to 3100 are obtained. The size-dependence of lasing characteristics have been investigated and the results show a good agreement with whispering gallery mode (WGM) theory. Our finding contributes an effective technique for the fabrication of high Q factor microlasers that may be potential for applications in biological and chemical sensors.

physics.optics↗

arXiv2020

Flexible and tensile microporous polymer fibers for wavelength-tunable random lasing

Flexible and tensile wavelength-tunable micrometer-sized random lasers in the form of microporous polymer fiber are demonstrated. The fibers are fabricated by directly drawing from an aqueous mixture and subsequently selective chemical etching in a green solvent. Size-dependent lasing threshold and spectrum are investigated. Owing to mechanical flexibility, wavelength-tuning of 5.5 nm is achieved by stretching the fiber.

physics.optics↗

arXiv2020

Objective-free excitation of quantum emitters with a laser-written micro parabolic mirror

The efficient excitation of quantum sources such as quantum dots or single molecules requires high NA optics which is often a challenge in cryogenics, or in ultrafast optics. Here we propose a 3.2 um wide parabolic mirror, with a 0.8 um focal length, fabricated by direct laser writing on CdSe/CdS colloidal quantum dots, capable of focusing the excitation light to a sub-wavelength spot and to extract the generated emission by collimating it into a narrow beam. This mirror is fabricated via in-situ volumetric optical lithography, which can be aligned to individual emitters, and it can be easily adapted to other geometries beyond the paraboloid. This compact solid-state transducer from far-field to the emitter has important applications in objective-free quantum technologies.

physics.optics↗

arXiv2020

How to organize an online conference

On January 13th 2020, the inaugural Photonics Online Meetup (POM) brought together more than 1100 researchers to discuss the latest advances in photonics. Or rather, it didn't, because the meeting was completely delocalized with the speakers, organizers, and attendees scattered across six continents and hundreds of locations, connected via a video-conferencing tool and social media. Despite this "delocalisation," the meeting retained many characteristics of a traditional conference: invited and contributed talks with follow-up questions and discussion, and a poster session. However, unlike with traditional conferences, all attendees avoided air travel, high registration costs (it was completely free), CO2 emission, or visa issues. Surely the impact on families was minimized as well, though participants in inconvenient time zones had to wake up early or stay up late. In this Comment, we highlight the key steps that enabled this event, offering tips and advice, to aid the organisation of similar Online Meetups.

cs.CY↗

arXiv2019

Nanoscale design of the local density of optical states

We propose a design concept for tailoring the local density of optical states (LDOS) in dielectric nanostructures, based on the phase distribution of the scattered optical fields induced by point-like emitters. First we demonstrate that the LDOS can be expressed in terms of a coherent summation of constructive and destructive contributions. By using an iterative approach, dielectric nanostructures can be designed to effectively remove the destructive terms. In this way dielectric Mie resonators, featuring low LDOS for electric dipoles, can be reshaped to enable enhancements of three orders of magnitude. To demonstrate the generality of the method, we also design nanocavities that enhance the radiated power of a circular dipole, a quadrupole and an arbitrary collection of coherent dipoles. Our concept provides a powerful tool for high-performance dielectric resonators, and affords fundamental insights into light-matter coupling at the nanoscale.

physics.optics↗

arXiv2018

A nanophotonic laser on a graph

Conventional nano-photonic schemes minimise multiple scattering to realise a miniaturised version of beam-splitters, interferometers and optical cavities for light propagation and lasing. Here instead, we introduce a nanophotonic network built from multiple paths and interference, to control and enhance light-matter interaction via light localisation. The network is built from a mesh of subwavelength waveguides, and can sustain localised modes and mirror-less light trapping stemming from interference over hundreds of nodes. With optical gain, these modes can easily lase, reaching $\sim$100 pm linewidths. We introduce a graph solution to the Maxwell's equation which describes light on the network, and predicts lasing action. In this framework, the network optical modes can be designed via the network connectivity and topology, and lasing can be tailored and enhanced by the network shape. Nanophotonic networks pave the way for new laser device architectures, which can be used for sensitive biosensing and on-chip optical information processing.

physics.optics↗

arXiv2018

A metal-dielectric parabolic antenna to direct single photons

Quantum emitters radiate light omni-directionally, making it hard to collect and use the generated photons. Here we propose a 3D metal-dielectric parabolic antenna surrounding an individual quantum dot as a source of collimated single photons which can then be easily extracted and manipulated. Our fabrication method relies on a single optically-induced polymerization step, once the selected emitter has been localized by confocal microscopy. Compared to conventional nano-antennas, our geometry does not require near-field coupling and it is therefore very robust against misalignment issues, and minimally affected by absorption in the metal. The parabolic antenna provides one of the largest reported experimental directivities (D=106) and the lowest beam divergences (Θ=13.5 deg), a broadband operation over all the visible and near-IR range, together with more than 96% extraction efficiency, offering a practical advantage for quantum technological applications.

physics.optics↗

arXiv2017

Microsphere solid state biolasers

Microsphere solid-state biolasers made of biomaterials-bovine serum albumin, pectin and cellulose are demonstrated. The fabrication is simple, based on emulsion, and with green processing. A lasing threshold of 1 microJ/mm2 and Q factor of 3000 are measured. The lasers are biocompatible, do not interfere with cell growth and division.

physics.optics↗

arXiv2017

Disordered Cellulose-based Nanostructures for Enhanced Light-scattering

Cellulose is the most abundant bio-polymer on earth. Cellulose fibres, such as the one extracted form cotton or woodpulp, have been used by humankind for hundreds of years to make textiles and paper. Here we show how, by engineering light matter-interaction, we can optimise light scattering using exclusively cellulose nanocrystals. The produced material is sustainable, biocompatible and, when compared to ordinary microfibre-based paper, it shows enhanced scattering strength (x4) yielding a transport mean free path as low as 3.5 um in the visible light range. The experimental results are in a good agreement with the theoretical predictions obtained with a diffusive model for light propagation.

physics.optics↗