arXiv subjects

Richard A. Norte

Publications and source records attributed to Richard A. Norte.

At least 19 recordsLinked to original sources

arXiv2026

High-Power Laser Drives Motion in Ultra-thin Photonic Crystal Lightsails via Radiation Pressure

Laser-driven lightsails have emerged as a promising route for accelerating ultralight spacecraft to high speeds using beamed optical energy. Realizing this concept pushes the limits of light-matter interaction, materials science, structural engineering, and nanomechanical design. A central challenge is to create nanophotonic reflectors that combine ultralow mass, large illuminated area, and survival under high optical power densities. No previous experiment has combined these constraints in a single structure sufficient to produce measurable radiation-pressure displacement. Here, we report the largest subwavelength tethered lightsails to date: nanoscale-thickness, millimeter-wide silicon nitride membranes patterned with billions of holes. Despite their subwavelength thickness, they achieve 99% reflection through resonant photonic modes, combining ultralow areal density with high reflectivity. Their compliance enables radiation-pressure displacements of up to 1.75 micrometer, a 50,000-fold increase over previous lightsail optomechanical responses. These thin mirrors are shown to withstand and maintain high reflectivity under directed laser intensities comparable to optical intensities at the surface of the Sun. Together, these results establish a testbed for high-power nanophotonics, directed-energy systems, and light-driven propulsion, defining the practical limits of ultrathin photonic materials under intense optical loading.

physics.optics↗

arXiv2026

Experimental Quantification of Nonlinear Mode Coupling in Nanomechanical Resonators using Multi-tone Excitation

Nonlinear modal interactions in resonant systems govern a wide range of phenomena, with broad relevance across modern physics and engineering. Yet, experimentally determining the strength of nonlinear coupling in multimode resonators remains highly challenging. Here, we introduce a multi-tone spectroscopy method for identifying nonlinear coupling coefficients directly from experimental data. Our approach employs dual-tone excitation near selected resonances which, in combination with additional probing tones at higher-order modes, generates sideband responses associated with specific modal couplings. These spectral signatures are analyzed using an inverse reconstruction procedure to quantitatively determine the corresponding nonlinear coupling strengths in the frequency domain. Using this method, we determine ten pairwise nonlinear coupling parameters across five modes of highly tensioned nanostrings, enabling the reconstruction of fully experimental, device-specific nonlinear reduced-order models. Our experimentally derived models show excellent agreement with values obtained numerically using finite element based nonlinear reduced-order models. Our method is generic and can be used for the characterization of diverse modal and intermodal couplings in mechanical and hybrid resonant systems.

cond-mat.mes-hall↗

arXiv2026

High-Strength Amorphous Silicon Carbide for Nanomechanics

For decades, mechanical resonators with high sensitivity have been realized using thin-film materials under high tensile loads. Although there have been remarkable strides in achieving low-dissipation mechanical sensors by utilizing high tensile stress, the performance of even the best strategy is limited by the tensile fracture strength of the resonator materials. In this study, a wafer-scale amorphous thin film is uncovered, which has the highest ultimate tensile strength ever measured for a nanostructured amorphous material. This silicon carbide (SiC) material exhibits an ultimate tensile strength of over 10 GPa, reaching the regime reserved for strong crystalline materials and approaching levels experimentally shown in graphene nanoribbons. Amorphous SiC strings with high aspect ratios are fabricated, with mechanical modes exceeding quality factors 10^8 at room temperature, the highest value achieved among SiC resonators. These performances are demonstrated faithfully after characterizing the mechanical properties of the thin film using the resonance behaviors of free-standing resonators. This robust thin-film material has significant potential for applications in nanomechanical sensors, solar cells, biological applications, space exploration and other areas requiring strength and stability in dynamic environments. The findings of this study open up new possibilities for the use of amorphous thin-film materials in high-performance applications.

cond-mat.mes-hall↗

arXiv2026

High-Stress Si3N4 Reflective Membranes Monolithically Integrated with Cavity Bragg Mirrors

High-stress silicon nitride (Si3N4) membranes represent the state-of-the-art for cavity optomechanics, combining ultralow dissipation, optical transparency, and full compatibility with wafer-scale nanofabrication. Yet their integration into high-finesse optical cavities has remained difficult, typically requiring bonding or alignment-sensitive assembly that limits scalability and long-term stability. Here, we introduce a monolithic, wafer-level integration strategy that directly suspends high-stress Si3N4 photonic-crystal membranes above thermally compatible SiN/SiO2 distributed Bragg reflectors (DBRs) capable of withstanding the high temperatures required for stoichiometric Si3N4 growth. A defect-free amorphous-silicon sacrificial layer and stiction-free plasma undercut yield vertically coupled cavities with sub-micron spacing-forming self-aligned resonators within seconds of release. Owing to the intrinsic tensile stress, the suspended membranes exhibit atomic-scale sagging, ensuring near-ideal cavity parallelism and long-term stability. Optical reflectivity measurements reveal cavity finesse exceeding 800 with nanoscale gaps between mirrors. Mechanical ringdown measurements show Q > 10^5, indicating that DBR integration preserves the low-dissipation character of high-stress Si3N4. This demonstrates that the integration process preserves the material's exceptional dissipation dilution, supporting straightforward extension to high-Q nanomechanical architectures reported in the literature. The resulting Si3N4-DBR platform unites optical and mechanical coherence with high fabrication yield and design flexibility, enabling scalable optomechanical devices for precision sensing and quantum photonics.

physics.optics↗

arXiv2026

High-Resolution Casimir Force Sensing Across a Superconducting Transition

The Casimir effect and superconductivity are foundational quantum phenomena whose interplay is an open question in physics, with significant implications for electron physics, quantum gravity, and high-temperature superconductivity. Determining how Casimir forces behave across a superconducting transition remains elusive due to the difficulty of realizing precise alignment, cryogenic operation, and isolating small force changes from competing effects. Recent theories predict milli-Pascal jumps in Casimir pressure across the transition, motivating experiments capable of reaching well below this regime. Here, we demonstrate an on-chip superconducting nanomechanical platform that overcomes these long-standing challenges, achieving the most parallel Casimir configurations to date. Our microchip-based parallel plates reach unprecedented area-to-separation ratios, exceeding past experiments across superconducting transitions by three orders of magnitude and yielding the strongest Casimir forces generated between compliant surfaces. Scanning tunneling microscopy (STM) directly detects the resonant motion of a suspended nanoscale plate with subatomic precision in lateral positioning and displacement, enabling suppression of van der Waals, electrostatic, and thermal effects. With verified micro-Pascal pressure resolution, our platform provides a credible entry point into a new field of quantum experiments, enabling exploration of Casimir-superconductivity interactions with the stability, parallelism, and sensitivity required to access this regime of physics.

quant-ph↗

arXiv2026

Cascade of Modal Interactions in Nanomechanical Resonators with Soft Clamping

We uncover a chain of nonlinear modal interactions in softly clamped nanostring resonators. The process involves the sequential coupling of five mechanical modes, during frequency sweeps, yielding a broad nonlinear response with nearly constant amplitude. We demonstrate that soft clamping enables this cascaded energy transfer and amplifies the effective geometric nonlinearity of the driven mode by an order of magnitude. Analytical and finite element-based reduced-order models capture the key features of the coupling cascade and clarify its underlying mechanism. The phenomenon is generic in nonlinear vibrational systems and can be tailored through soft-clamping design strategies.

cond-mat.mes-hall↗

arXiv2024

Finite Element-based Nonlinear Dynamic Optimization of Nanomechanical Resonators

Nonlinear dynamic simulations of mechanical resonators have been facilitated by the advent of computational techniques that generate nonlinear reduced order models (ROMs) using the finite element (FE) method. However, designing devices with specific nonlinear characteristics remains inefficient since it requires manual adjustment of the design parameters and can result in suboptimal designs. Here, we integrate an FE-based nonlinear ROM technique with a derivative-free optimization algorithm to enable the design of nonlinear mechanical resonators. The resulting methodology is used to optimize the support design of high-stress nanomechanical Si3N4 string resonators, in the presence of conflicting objectives such as simultaneous enhancement of Q-factor and nonlinear Duffing constant. To that end, we generate Pareto frontiers that highlight the trade-offs between optimization objectives and validate the results both numerically and experimentally. To further demonstrate the capability of multi-objective optimization for practical design challenges, we simultaneously optimize the design of nanoresonators for three key figure-of-merits in resonant sensing: power consumption, sensitivity and response time. The presented methodology can facilitate and accelerate designing (nano)mechanical resonators with optimized performance for a wide variety of applications.

physics.app-ph↗

arXiv2024

Centimeter-scale nanomechanical resonators with low dissipation

High-aspect-ratio mechanical resonators are pivotal in precision sensing, from macroscopic gravitational wave detectors to nanoscale acoustics. However, fabrication challenges and high computational costs have limited the length-to-thickness ratio of these devices, leaving a largely unexplored regime in nano-engineering. We present nanomechanical resonators that extend centimeters in length yet retain nanometer thickness. We explore this expanded design space using an optimization approach which judiciously employs fast millimeter-scale simulations to steer the more computationally intensive centimeter-scale design optimization. By employing delicate nanofabrication techniques, our approach ensures high-yield realization, experimentally confirming room-temperature quality factors close to theoretical predictions. The synergy between nanofabrication, design optimization guided by machine learning, and precision engineering opens a solid-state path to room-temperature quality factors approaching 10 billion at kilohertz mechanical frequencies -- comparable to the performance of leading cryogenic resonators and levitated nanospheres, even under significantly less stringent temperature and vacuum conditions.

cond-mat.mes-hall↗

arXiv2024

Negative Temperature Pressure in Black Holes

The concept of negative temperature (T < 0) is unique to quantum physics and describes systems that are hotter than any positive temperature system. For decades negative temperatures have been shown in a number of spin systems, but experiments only recently demonstrated atomic ensembles with negative temperatures in their motional degrees of freedom. An observed behavior of such negative temperature ensembles is that despite highly attractive forces between an arbitrary number of particles, there is a self-stabilization against collapse. Negative temperatures are only possible in quantum systems because there exists upper bounds on the energy of particles -- a property not found in classical physics. Here we consider whether event horizons set up similar upper limits within black holes, giving rise to negative temperature systems just within event horizons. Combining black hole thermodynamics with experimentally observed negative temperature effects could imply a quantum-based outward pressure in black holes.

gr-qc↗

arXiv2023

Beating ringdowns of near-degenerate mechanical resonances

Mechanical resonators that possess coupled modes with harmonic frequency relations have recently sparked interest due to their suitability for controllable energy transfer and non-Hermitian dynamics. Here, we show coupling between high Q-factor ($>\!\!10^4$) resonances with a nearly 1:1 frequency relation in spatially-symmetric microresonators. We develop and demonstrate a method to analyze their dynamical behavior based on the simultaneous and resonant detection of both spectral peaks, and validate this with experimental results. The frequency difference between the peaks modulates their ringdown, and creates a beat pattern in the linear decay. This method applies both to the externally driven and the Brownian motion (thermal) regime, and allows characterization of both linear and nonlinear parameters. The mechanism behind this method renders it broadly applicable to both optical and electrical readout, as well as to different mechanical systems. This will aid studies using near-degenerate mechanical modes, for e.g., optomechanical energy transfer, synchronization and gyroscopic sensors.

physics.app-ph↗

arXiv2023

Mechanical overtone frequency combs

Mechanical frequency combs are poised to bring the applications and utility of optical frequency combs into the mechanical domain. So far, their main challenge has been strict requirements on drive frequencies and power, which complicate operation. We demonstrate a straightforward mechanism to create a frequency comb consisting of mechanical overtones (integer multiples) of a single eigenfrequency, by monolithically integrating a suspended dielectric membrane with a counter-propagating optical trap. The periodic optical field modulates the dielectrophoretic force on the membrane at the overtones of a membrane's motion. These overtones share a fixed frequency and phase relation, and constitute a mechanical frequency comb. The periodic optical field also creates an optothermal parametric drive that requires no additional power or external frequency reference. This combination of effects results in an easy-to-use mechanical frequency comb platform that requires no precise alignment, no additional feedback or control electronics, and only uses a single, mW continuous wave laser beam. This highlights the overtone frequency comb as the straightforward future for applications in sensing, metrology and quantum acoustics.

physics.optics↗

arXiv2022

Mechanical dissipation by substrate-mode coupling in SiN resonators

State-of-the-art nanomechanical resonators are heralded as a central component for next-generation clocks, filters, resonant sensors and quantum technologies. To practically build these technologies will require monolithic integration of microchips, resonators and readout systems. While it is widely seen that mounting microchip substrates into a system can greatly impact the performance of high-Q resonators, a systematic study has remained elusive, owing to the variety of physical processes and factors that influence the dissipation. Here, we analytically analyze a mechanism by which substrates couple to resonators manufactured on them, and experimentally demonstrate that this coupling can increase the mechanical dissipation of nanomechanical resonators when the resonance frequencies of resonator and substrate coincide. More generally, we then show a similar coupling mechanism can exist between two adjacent resonators. Since the substrate-mode coupling mechanism strongly depends on both the resonator position on the substrate and the mounting of the substrate, this work provides key design guidelines for high-precision nanomechanical technologies.

physics.app-ph↗

arXiv2022

Resolution Limits of Resonant Sensors with Duffing Non-Linearity

The resolution of resonant sensors is fundamentally limited by the presence of noise. Thermomechanical noise, intrinsic to the resonator, sets the ultimate sensor performance when all other noise sources have been eliminated. For linear resonators, the sensing resolution can always be further improved by increasing the driving power. However, this trend cannot continue indefinitely, since at sufficiently high driving powers non-linear effects emerge and influence the noise performance. As a consequence, the resonator's non-linear characteristics play an inextricable role in determining its ultimate resolution limits. Recently, several works have studied the characteristic performance of non-linear resonators as sensors, with the counter intuitive conclusion that increasing the quality factor of a resonator does not improve its sensing resolution at the thermomechanical limit. In this work we further analyze the ultimate resolution limits, and describe different regimes of performance at integration times below and above the resonator's decay time. We provide an analytical model to elucidate the effects of Duffing non-linearity on the resolution of closed-loop sensors, and validate it using numerical simulations. In contrast to previous works, our model and simulations show that under certain conditions the ultimate sensing resolution of a Duffing resonator can be improved by maximizing its quality factor. With measurements on a nanomechanical membrane resonator, we experimentally verify the model and demonstrate that frequency resolutions can be achieved that surpass the previously known limits.

physics.app-ph↗

arXiv2022

Coherent mechanical noise cancellation and cooperativity competition in optomechanical arrays

Studying the interplay between multiple coupled mechanical resonators is a promising new direction in the field of optomechanics. Understanding the dynamics of the interaction can lead to rich new effects, such as enhanced coupling and multi-body physics. In particular, multi-resonator optomechanical systems allow for distinct dynamical effects due to the optical cavity coherently coupling mechanical resonators. Here, we study the mechanical response of two SiN membranes and a single optical mode, and find that the cavity induces a time delay between the local and cavity-transduced thermal noises experienced by the resonators. This results in an optomechanical phase lag that causes destructive interference, cancelling the mechanical thermal noise by up to 20 dB in a controllable fashion, matching our theoretical expectation. Based on the effective coupling between membranes, we further propose, derive and measure a collective effect, cooperativity competition on mechanical dissipation, whereby the linewidth of one resonator depends on the coupling efficiency (cooperativity) of the other resonator.

physics.optics↗

arXiv2021

Spiderweb nanomechanical resonators via Bayesian optimization: inspired by nature and guided by machine learning

From ultra-sensitive detectors of fundamental forces to quantum networks and sensors, mechanical resonators are enabling next-generation technologies to operate in room temperature environments. Currently, silicon nitride nanoresonators stand as a leading microchip platform in these advances by allowing for mechanical resonators whose motion is remarkably isolated from ambient thermal noise. However, to date, human intuition has remained the driving force behind design processes. Here, inspired by nature and guided by machine learning, a spiderweb nanomechanical resonator is developed that exhibits vibration modes which are isolated from ambient thermal environments via a novel "torsional soft-clamping" mechanism discovered by the data-driven optimization algorithm. This bio-inspired resonator is then fabricated; experimentally confirming a new paradigm in mechanics with quality factors above 1 billion in room temperature environments. In contrast to other state-of-the-art resonators, this milestone is achieved with a compact design which does not require sub-micron lithographic features or complex phononic bandgaps, making it significantly easier and cheaper to manufacture at large scales. Here we demonstrate the ability of machine learning to work in tandem with human intuition to augment creative possibilities and uncover new strategies in computing and nanotechnology.

cond-mat.mes-hall↗

arXiv2020

Quantum Weak Equivalence Principle and the Gravitational Casimir Effect in Superconductors

We will use Fisher information to properly analyze the quantum weak equivalence principle. We argue that gravitational waves will be partially reflected by superconductors. This will occur as the violation of the weak equivalence principle in Cooper pairs is larger than the surrounding ionic lattice. Such reflections of virtual gravitational waves by superconductors can produce a gravitational Casimir effect, which may be detected using currently available technology.

gr-qc↗

arXiv2020

Feedback cooling of a room temperature mechanical oscillator close to its motional groundstate

Preparing mechanical systems in their lowest possible entropy state, the quantum ground state, starting from a room temperature environment is a key challenge in quantum optomechanics. This would not only enable creating quantum states of truly macroscopic systems, but at the same time also lay the groundwork for a new generation of quantum-limited mechanical sensors in ambient environments. Laser cooling of optomechanical devices using the radiation pressure force combined with cryogenic precooling has been successful at demonstrating ground state preparation of various devices, while a similar demonstration starting from a room temperature environment remains an outstanding goal. Here, we combine integrated nanophotonics with phononic band gap engineering to simultaneously overcome prior limitations in the isolation from the surrounding environment and the achievable mechanical frequencies, as well as limited optomechanical coupling strength, demonstrating a single-photon cooperativity of 200. This new microchip technology allows us to feedback cool a mechanical resonator to around 1 mK, near its motional ground state, from room temperature. Our experiment marks a major step toward accessible, widespread quantum technologies with mechanical resonators.

physics.optics↗

arXiv2020

Microwave-to-optics conversion using a mechanical oscillator in its quantum groundstate

Conversion between signals in the microwave and optical domains is of great interest both for classical telecommunication, as well as for connecting future superconducting quantum computers into a global quantum network. For quantum applications, the conversion has to be both efficient, as well as operate in a regime of minimal added classical noise. While efficient conversion has been demonstrated using mechanical transducers, they have so far all operated with a substantial thermal noise background. Here, we overcome this limitation and demonstrate coherent conversion between GHz microwave signals and the optical telecom band with a thermal background of less than one phonon. We use an integrated, on-chip electro-opto-mechanical device that couples surface acoustic waves driven by a resonant microwave signal to an optomechanical crystal featuring a 2.7 GHz mechanical mode. We initialize the mechanical mode in its quantum groundstate, which allows us to perform the transduction process with minimal added thermal noise, while maintaining an optomechanical cooperativity >1, so that microwave photons mapped into the mechanical resonator are effectively upconverted to the optical domain. We further verify the preservation of the coherence of the microwave signal throughout the transduction process.

quant-ph↗