arXiv subjects
Publications and source records attributed to Richard D. Wesel.
Algorithms are presented that efficiently shape the parity bits of systematic irregular repeat-accumulate (IRA) low-density parity-check (LDPC) codes by following the sequential encoding order of the accumulator. Simulations over additive white Gaussian noise (AWGN) channels with on-off keying show a gain of up to 0.9 dB over uniform signaling.
Posterior matching uses variable-length encoding of the message controlled by noiseless feedback of the received symbols to achieve high rates for short average blocklengths. Traditionally, the feedback of a received symbol occurs before the next symbol is transmitted. The transmitter optimizes the next symbol transmission with full knowledge of every past received symbol. To move posterior matching closer to practical communication, this paper seeks to constrain how often feedback can be sent back to the transmitter. We focus on reducing the frequency of the feedback while still maintaining the high rates that posterior matching achieves with feedback after every symbol. As it turns out, the frequency of the feedback can be reduced significantly with no noticeable reduction in rate.
Recently, rate-1/n zero-terminated (ZT) and tail-biting (TB) convolutional codes (CCs) with cyclic redundancy check (CRC)-aided list decoding have been shown to closely approach the random-coding union (RCU) bound for short blocklengths. This paper designs CRC polynomials for rate- (n-1)/n ZT and TB CCs with short blocklengths. This paper considers both standard rate-(n-1)/n CC polynomials and rate- (n-1)/n designs resulting from puncturing a rate-1/2 code. The CRC polynomials are chosen to maximize the minimum distance d_min and minimize the number of nearest neighbors A_(d_min) . For the standard rate-(n-1)/n codes, utilization of the dual trellis proposed by Yamada et al. lowers the complexity of CRC-aided serial list Viterbi decoding (SLVD). CRC-aided SLVD of the TBCCs closely approaches the RCU bound at a blocklength of 128. This paper compares the FER performance (gap to the RCU bound) and complexity of the CRC-aided standard and punctured ZTCCs and TBCCs. This paper also explores the complexity-performance trade-off for three TBCC decoders: a single-trellis approach, a multi-trellis approach, and a modified single-trellis approach with pre-processing using the wrap around Viterbi algorithm.
In this paper, we present new achievability bounds on the maximal achievable rate of variable-length stop-feedback (VLSF) codes operating over a binary erasure channel (BEC) at a fixed message size $M = 2^k$. We provide new bounds for VLSF codes with zero error, infinite decoding times and with nonzero error, finite decoding times. Both new achievability bounds are proved by constructing a new VLSF code that employs systematic transmission of the first $k$ bits followed by random linear fountain parity bits decoded with a rank decoder. For VLSF codes with infinite decoding times, our new bound outperforms the state-of-the-art result for BEC by Devassy \emph{et al.} in 2016. We also give a negative answer to the open question Devassy \emph{et al.} put forward on whether the $23.4\%$ backoff to capacity at $k = 3$ is fundamental. For VLSF codes with finite decoding times, numerical evaluations show that the achievable rate for VLSF codes with a moderate number of decoding times closely approaches that for VLSF codes with infinite decoding times.
An algorithm is proposed to encode low-density parity-check (LDPC) codes into codewords with a non-uniform distribution. This enables power-efficient signalling for asymmetric channels. We show gains of 0.9 dB for additive white Gaussian noise (AWGN) channels with on-off keying modulation using 5G LDPC codes.
Motivated by the need to communicate short control messages in 5G and beyond, this paper carefully designs codes for cyclic redundancy check (CRC)-aided list decoding of tail-biting convolutional codes (TBCCs) and polar codes. Both codes send a 32-bit message using an 11-bit CRC and 512 transmitted bits. We aim to provide a careful, fair comparison of the error performance and decoding complexity of polar and TBCC techniques for a specific case. Specifically, a TBCC is designed to match the rate of a (512, 43) polar code, and optimal 11-bit CRCs for both codes are designed. The paper examines the distance spectra of the polar and TBCC codes, illuminating the different distance structures for the two code types. We consider both adaptive and non-adaptive CRC-aided list decoding schemes. For polar codes, an adaptive decoder must start with a larger list size to avoid an error floor. For rate-32/512 codes with an 11-bit CRC, the optimized CRC-TBCC design achieves a lower total failure rate than the optimized CRC-polar design. Simulations showed that the optimized CRC-TBCC design achieved significantly higher throughput than the optimized CRC-polar design, so that the TBCC solution achieved a lower total failure rate while requiring less computational complexity.
Incremental redundancy with ACK/NACK feedback produces a variable-length stop-feedback (VLSF) code constrained to have $m$ decoding times, with an ACK/NACK feedback to the transmitter at each decoding time. This paper focuses on the numerical evaluation of the maximal achievable rate of random VLSF codes as a function of $m$ for the binary-input additive white Gaussian noise channel, binary symmetric channel, and binary erasure channel (BEC). Leveraging Edgeworth and Petrov expansions, we develop tight approximations to the tail probability of length-$n$ cumulative information density that are accurate for any blocklength $n$. We reduce Yavas et al.'s non-asymptotic achievability bound on VLSF codes with $m$ decoding times to an integer program of minimizing the upper bound on the average blocklength subject to the average error probability, minimum gap, and integer constraints. We develop two distinct methods to solve this program. Numerical evaluations show that Polyanskiy's achievability bound for VLSF codes, which assumes $m = \infty$, can be approached with a small $m$ for all three channels. For BEC, we consider systematic transmission followed by random linear fountain coding. This allows us to obtain a new achievability bound stronger than a previous bound and new VLSF codes whose rate further outperforms Polyanskiy's bound.
We extend earlier work on the design of convolutional code-specific CRC codes to $Q$-ary alphabets, with an eye toward $Q$-ary orthogonal signaling. Starting with distance-spectrum optimal, zero-terminated, $Q$-ary convolutional codes, we design $Q$-ary CRC codes so that the CRC/convolutional concatenation is distance-spectrum optimal. The $Q$-ary code symbols are mapped to a $Q$-ary orthogonal signal set and sent over an AWGN channel with noncoherent reception. We focus on $Q = 4$, rate-1/2 convolutional codes in our designs. The random coding union bound and normal approximation are used in earlier works as benchmarks for performance for distance-spectrum optimal convolutional codes. We derive a saddlepoint approximation of the random coding union bound for the coded noncoherent signaling channel, as well as a normal approximation for this channel, and compare the performance of our codes to these limits. Our best design is within $0.6$ dB of the RCU bound at a frame error rate of $10^{-4}$.
Recently, rate-$1/ω$ zero-terminated and tail-biting convolutional codes (ZTCCs and TBCCs) with cyclic-redundancy-check (CRC)-aided list decoding have been shown to closely approach the random-coding union (RCU) bound for short blocklengths. This paper designs CRCs for rate-$(ω-1)/ω$ CCs with short blocklengths, considering both the ZT and TB cases. The CRC design seeks to optimize the frame error rate (FER) performance of the code resulting from the concatenation of the CRC and the CC. Utilization of the dual trellis proposed by Yamada \emph{et al.} lowers the complexity of CRC-aided serial list Viterbi decoding (SLVD) of ZTCCs and TBCCs. CRC-aided SLVD of the TBCCs closely approaches the RCU bound at a blocklength of $128$.
In this paper, we are interested in the performance of a variable-length stop-feedback (VLSF) code with $m$ optimal decoding times for the binary-input additive white Gaussian noise channel. We first develop tight approximations on the tail probability of length-$n$ cumulative information density. Building on the work of Yavas \emph{et al.}, for a given information density threshold, we formulate the integer program of minimizing the upper bound on average blocklength over all decoding times subject to the average error probability, minimum gap and integer constraints. Eventually, minimization of locally minimum upper bounds over all thresholds will yield the globally minimum upper bound and this is called the two-step minimization. For the integer program, we present a greedy algorithm that yields possibly suboptimal integer decoding times. By allowing a positive real-valued decoding time, we develop the gap-constrained sequential differential optimization (SDO) procedure that sequentially produces the optimal, real-valued decoding times. We identify the error regime in which Polyanskiy's scheme of stopping at zero does not improve the achievability bound. In this error regime, the two-step minimization with the gap-constrained SDO shows that a finite $m$ suffices to attain Polyanskiy's bound for VLSF codes with $m = \infty$.
This paper explores list decoding of convolutional and polar codes for short messages such as those found in the 5G physical broadcast channel. A cyclic redundancy check (CRC) is used to select a codeword from a list of likely codewords. One example in the 5G standard encodes a 32-bit message with a 24-bit CRC and a 512-bit polar code with additional bits added by repetition to achieve a very low rate of 32/864. This paper shows that optimizing the CRC length improves the $E_b/N_0$ performance of this polar code, where $E_b/N_0$ is the ratio of the energy per data bit to the noise power spectral density. Furthermore, even better $E_b/N_0$ performance is achieved by replacing the polar code with a tail-biting convolutional code (TBCC) with a distance-spectrum-optimal (DSO) CRC. This paper identifies the optimal CRC length to minimize the frame error rate (FER) of a rate-1/5 TBCC at a specific value of $E_b/N_0$. We also show that this optimized TBCC/CRC can attain the same excellent $E_b/N_0$ performance with the very low rate of 32/864 of the 5G polar code, where the low rate is achieved through repetition. We show that the proposed TBCC/CRC concatenated code outperforms the PBCH polar code described in the 5G standard both in terms of FER and decoding run time. We also explore the tradeoff between undetected error rate and erasure rate as the CRC size varies.
In this paper, we consider the problem of variable-length coding over the class of memoryless binary asymmetric channels (BACs) with noiseless feedback, including the binary symmetric channel (BSC) as a special case. In 2012, Naghshvar et al. introduced an encoding scheme, which we refer to as the small-enough-difference (SED) encoder, which asymptotically achieves both capacity and Burnashev's optimal error exponent for symmetric binary-input channels. Building on the work of Naghshvar et al., this paper extends the SED encoding scheme to the class of BACs and develops a non-asymptotic upper bound on the average blocklength that is shown to achieve both capacity and the optimal error exponent. For the specific case of the BSC, we develop an additional non-asymptotic bound using a two-phase analysis that leverages both a submartingale synthesis and a Markov chain time of first passage analysis. For the BSC with capacity $1/2$, both new achievability bounds exceed the achievability bound of Polyanskiy et al. for a system limited to stop-feedback codes.
This paper applies probabilistic amplitude shaping (PAS) to a cyclic redundancy check (CRC) aided trellis coded modulation (TCM) to achieve the short-blocklength random coding union (RCU) bound. In the transmitter, the equally likely message bits are first encoded by distribution matcher to generate amplitude symbols with the desired distribution. The binary representations of the distribution matcher outputs are then encoded by a CRC. Finally, the CRC-encoded bits are encoded and modulated by Ungerboeck's TCM scheme, which consists of a $\frac{k_0}{k_0+1}$ systematic tail-biting convolutional code and a mapping function that maps coded bits to channel signals with capacity-achieving distribution. This paper proves that, for the proposed transmitter, the CRC bits have uniform distribution and that the channel signals have symmetric distribution. In the receiver, the serial list Viterbi decoding (S-LVD) is used to estimate the information bits. Simulation results show that, for the proposed CRC-TCM-PAS system with 87 input bits and 65-67 8-AM coded output symbols, the decoding performance under additive white Gaussian noise channel achieves the RCU bound with properly designed CRC and convolutional codes.
Traditional channel coding with feedback constructs and transmits a codeword only after all message bits are available at the transmitter. This paper joins Guo & Kostina and Lalitha et. al. in developing approaches for causal (or progressive) encoding, where the transmitter may begin transmitting codeword symbols as soon as the first message bit arrives. Building on the work of Horstein, Shayevitz and Feder, and Naghshvar et. al., this paper extends our previous computationally efficient systematic algorithm for traditional posterior matching to produce a four-phase encoder that progressively encodes using only the message bits causally available. Systematic codes work well with posterior matching on a channel with feedback, and they provide an immediate benefit when causal encoding is employed instead of traditional encoding. Our algorithm captures additional gains in the interesting region where the transmission rate mu is higher than the rate lambda at which message bits become available. In this region, transmission of additional symbols beyond systematic bits, before a traditional encoder would have begun transmission, further improves performance
A status updating system is considered in which a variable length code is used to transmit messages to a receiver over a noisy channel. The goal is to optimize the codewords lengths such that successfully-decoded messages are timely. That is, such that the age-of-information (AoI) at the receiver is minimized. A hybrid ARQ (HARQ) scheme is employed, in which variable-length incremental redundancy (IR) bits are added to the originally-transmitted codeword until decoding is successful. With each decoding attempt, a non-zero processing delay is incurred. The optimal codewords lengths are analytically derived utilizing a sequential differential optimization (SDO) framework. The framework is general in that it only requires knowledge of an analytical expression of the positive feedback (ACK) probability as a function of the codeword length.
In this paper, the Dynamic-Assignment Blahut-Arimoto (DAB) algorithm identifies finite-support probability mass functions (PMFs) with small cardinality that achieve capacity for amplitude-constrained (AC) Additive White Gaussian Noise (AWGN) Channels, or approach capacity to within less than 1% for power-constrained (PC) AWGN Channels. While a continuous Gaussian PDF is well-known to be a theoretical capacity-achieving distribution for the PC-AWGN channel, DAB identifies PMFs with small-cardinality that are, for practical purposes, indistinguishable in performance. We extend the results of Ozarow and Wyner that require a constellation cardinality of $2^{C+1}$ to approach capacity C to within the shaping loss. PMF's found by DAB approach capacity with essentially no shaping loss with constellation cardinality of $2^{C+1.2}$. For AC-AWGN channels, DAB characterizes the evolution of minimum-cardinality finite-support capacity-achieving PMFs.
In this paper, we consider the problem of sequential transmission over the binary symmetric channel (BSC) with full, noiseless feedback. Naghshvar et al. proposed a one-phase encoding scheme, for which we refer to as the small-enough difference (SED) encoder, which can achieve capacity and Burnashev's optimal error exponent for symmetric binary-input channels. They also provided a non-asymptotic upper bound on the average blocklength, which implies an achievability bound on rates. However, their achievability bound is loose compared to the simulated performance of SED encoder, and even lies beneath Polyanskiy's achievability bound of a system limited to stop feedback. This paper significantly tightens the achievability bound by using a Markovian analysis that leverages both the submartingale and Markov properties of the transmitted message. Our new non-asymptotic lower bound on achievable rate lies above Polyanskiy's bound and is close to the actual performance of the SED encoder over the BSC.
This work introduces the particle-intensity channel (PIC) as a model for molecular communication systems and characterizes the capacity limits as well as properties of the optimal (capacity-achieving) input distributions for such channels. In the PIC, the transmitter encodes information, in symbols of a given duration, based on the probability of particle release, and the receiver detects and decodes the message based on the number of particles detected during the symbol interval. In this channel, the transmitter may be unable to control precisely the probability of particle release, and the receiver may not detect all the particles that arrive. We model this channel using a generalization of the binomial channel and show that the capacity-achieving input distribution for this channel always has mass points at probabilities of particle release of zero and one. To find the capacity-achieving input distributions, we develop an efficient algorithm we call dynamic assignment Blahut-Arimoto (DAB). For diffusive particle transport, we also derive the conditions under which the input with two mass points is capacity-achieving.