arXiv subjects

Richard Demo Souza

Publications and source records attributed to Richard Demo Souza.

At least 37 records · Page 2Linked to original sources

arXiv2023

Energy-Aware Federated Learning with Distributed User Sampling and Multichannel ALOHA

Distributed learning on edge devices has attracted increased attention with the advent of federated learning (FL). Notably, edge devices often have limited battery and heterogeneous energy availability, while multiple rounds are required in FL for convergence, intensifying the need for energy efficiency. Energy depletion may hinder the training process and the efficient utilization of the trained model. To solve these problems, this letter considers the integration of energy harvesting (EH) devices into a FL network with multi-channel ALOHA, while proposing a method to ensure both low energy outage probability and successful execution of future tasks. Numerical results demonstrate the effectiveness of this method, particularly in critical setups where the average energy income fails to cover the iteration cost. The method outperforms a norm based solution in terms of convergence time and battery level.

eess.SP↗

arXiv2023

Trade-Off Between Beamforming and Macro-Diversity Gains in Distributed mMIMO

Industry and academia have been working towards the evolution from Centralized massive Multiple-Input Multiple-Output (CmMIMO) to Distributed mMIMO (DmMIMO) architectures. Instead of splitting a coverage area into many cells, each served by a single Base Station equipped with several antennas, the whole coverage area is jointly covered by several Access Points (AP) equipped with few or single antennas. Nevertheless, when choosing between deploying more APs with few or single antennas or fewer APs equipped with many antennas, one observes an inherent trade-off between the beamforming and macro-diversity gains that has not been investigated in the literature. Given a total number of antenna elements and total downlink power, under a channel model that takes into account a probability of Line-of-Sight (LoS) as a function of the distance between the User Equipments (UEs) and APs, our numerical results show that there exists a ``sweet spot" on the optimal number of APs and of antenna elements per AP which is a function of the physical dimensions of the coverage area.

cs.IT↗

arXiv2023

Age-of-Information Dependent Random Access in NOMA-Aided Multiple-Relay Slotted ALOHA

We propose and evaluate the performance of a Non-Orthogonal Multiple Access (NOMA) dual-hop multiple relay (MR) network from an information freshness perspective using the Age of Information (AoI) metric. More specifically, we consider an age dependent (AD) policy, named as AD-NOMA- MR, in which users only transmit, with a given probability, after they reach a certain age threshold. The packets sent by the users are potentially received by the relays, and then forwarded to a common sink in a NOMA fashion by randomly selecting one of the available power levels, and multiple packets are received if all selected levels are unique. We derive analytical expressions for the average AoI of AD-NOMA-MR. Through numerical and simulation results, we show that the proposed policy can improve the average AoI up to 76.6% when compared to a previously proposed AD Orthogonal Multiple Access MR policy.

cs.IT↗

arXiv2023

Performance Analysis of Centralized and Distributed Massive MIMO for MTC

Massive Multiple-Input Multiple-Output (mMIMO) is one of the essential technologies introduced by the Fifth Generation (5G) of wireless communication systems. However, although mMIMO provides many benefits for wireless communications, it cannot ensure uniform wireless coverage and suffers from inter-cell interference inherent to the traditional cellular network paradigm. Therefore, industry and academia are working on the evolution from conventional Centralized mMIMO (CmMIMO) to Distributed mMIMO (DmMIMO) architectures for the Sixth Generation (6G) of wireless networks. Under this new paradigm, several Access Points (APs) are distributed in the coverage area, and all jointly cooperate to serve the active devices. Aiming at Machine-Type Communication (MTC) use cases, we compare the performance of CmMIMO and different DmMIMO deployments in an indoor industrial scenario considering regular and alarm traffic patterns for MTC. Our simulation results show that DmMIMO's performance is often superior to CmMIMO. However, the traditional CmMIMO can outperform DmMIMO when the devices' channels are highly correlated.

cs.IT↗

arXiv2023

Performance Analysis of ML-based MTC Traffic Pattern Predictors

Prolonging the lifetime of massive machine-type communication (MTC) networks is key to realizing a sustainable digitized society. Great energy savings can be achieved by accurately predicting MTC traffic followed by properly designed resource allocation mechanisms. However, selecting the proper MTC traffic predictor is not straightforward and depends on accuracy/complexity trade-offs and the specific MTC applications and network characteristics. Remarkably, the related state-of-the-art literature still lacks such debates. Herein, we assess the performance of several machine learning (ML) methods to predict Poisson and quasi-periodic MTC traffic in terms of accuracy and computational cost. Results show that the temporal convolutional network (TCN) outperforms the long-short term memory (LSTM), the gated recurrent units (GRU), and the recurrent neural network (RNN), in that order. For Poisson traffic, the accuracy gap between the predictors is larger than under quasi-periodic traffic. Finally, we show that running a TCN predictor is around three times more costly than other methods, while the training/inference time is the greatest/least.

eess.SP↗

arXiv2022

Energy-Efficient Wake-Up Signalling for Machine-Type Devices Based on Traffic-Aware Long-Short Term Memory Prediction

Reducing energy consumption is a pressing issue in low-power machine-type communication (MTC) networks. In this regard, the Wake-up Signal (WuS) technology, which aims to minimize the energy consumed by the radio interface of the machine-type devices (MTDs), stands as a promising solution. However, state-of-the-art WuS mechanisms use static operational parameters, so they cannot efficiently adapt to the system dynamics. To overcome this, we design a simple but efficient neural network to predict MTC traffic patterns and configure WuS accordingly. Our proposed forecasting WuS (FWuS) leverages an accurate long-short term memory (LSTM)- based traffic prediction that allows extending the sleep time of MTDs by avoiding frequent page monitoring occasions in idle state. Simulation results show the effectiveness of our approach. The traffic prediction errors are shown to be below 4%, being false alarm and miss-detection probabilities respectively below 8.8% and 1.3%. In terms of energy consumption reduction, FWuS can outperform the best benchmark mechanism in up to 32%. Finally, we certify the ability of FWuS to dynamically adapt to traffic density changes, promoting low-power MTC scalability

eess.SP↗

arXiv2022

Statistical Analysis of Received Signal Strength in Industrial IoT Distributed Massive MIMO Systems

The Fifth Generation (5G) of wireless networks introduced native support for Machine-Type Communication (MTC), which is a key enabler for the Internet of Things (IoT) revolution. Current 5G standards are not yet capable of fully satisfying the requirements of critical MTC (cMTC) and massive MTC (mMTC) use cases. This is the main reason why industry and academia have already started working on technical solutions for beyond-5G and Sixth Generation (6G) networks. One technological solution that has been extensively studied is the combination of network densification, massive Multiple-Input Multiple-Output (mMIMO) systems and user-centric design, which is known as distributed mMIMO or Cell-Free (CF) mMIMO. Under this new paradigm, there are no longer cell boundaries: all the Access Points (APs) on the network cooperate to jointly serve all the devices. In this paper, we compare the performance of traditional mMIMO and different distributed mMIMO setups, and quantify the macro diversity and signal spatial diversity performance they provide. Aiming at the uplink in industrial indoor scenarios, we adopt a path loss model based on real measurement campaigns. Monte Carlo simulation results show that the grid deployment of APs provide higher average channel gains, but radio stripes deployments provide lower variability of the received signal strength.

eess.SP↗

arXiv2022

Massive MIMO with Radio Stripes for Indoor Wireless Energy Transfer

Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approximation (SCA), and maximum ratio transmission (MRT) techniques, we derive optimal and sub-optimal precoders aimed at minimizing the radio stripes' transmit power while exploiting information of the power transfer efficiency of the EH circuits at the UEs. Moreover, we propose an analytical framework to assess and control the electromagnetic field (EMF) radiation exposure in the considered indoor scenario. Numerical results show that i) the EMF radiation exposure can be more easily controlled at higher frequencies at the cost of a higher transmit power consumption, ii) training is not a very critical factor for the considered indoor system, iii) MRT/SCA-based precoders are particularly appealing when serving a small number of UEs, thus, especially suitable for implementation in a time domain multiple access (TDMA) scheduling framework, and iv) TDMA is more efficient than spatial domain multiple access (SDMA) when serving a relatively small number of UEs. Results suggest that additional boosting performance strategies are needed to increase the overall system efficiency, thus making the technology viable in practice.

cs.IT↗

arXiv2021

Exploring the Non-Overlapping Visibility Regions in XL-MIMO Random Access Protocol

The recent extra-large scale massive multiple-input multiple-output (XL-MIMO) systems are seen as a promising technology for providing very high data rates in increased user-density scenarios. Spatial non-stationarities and visibility regions (VRs) appear across the XL-MIMO array since its large dimension is of the same order as the distances to the user-equipments (UEs). Due to the increased density of UEs in typical applications of XL-MIMO systems and the scarcity of pilots, the design of random access (RA) protocols and scheduling algorithms become challenging. In this paper, we propose a joint RA and scheduling protocol, namely non-overlapping VR XL- MIMO (NOVR-XL) RA protocol, which takes advantage of the different VRs of the UEs for improving RA performance, besides seeking UEs with non-overlapping VRs to be scheduled in the same payload data pilot resource. Our results reveal that the proposed scheme achieves significant gains in terms of sum rate compared with traditional RA schemes, as well as reducing access latency and improving connectivity performance as a whole.

cs.IT↗

arXiv2021

Improving 6TiSCH Reliability and Latency with Simultaneous Multi-Band Operation

The Internet Engineering Task Force (IETF) group "IPv6 over the TSCH mode of IEEE 802.15.4e" (6TiSCH) introduced a protocol, utilizing Time-Slotted Channel Hopping (TSCH) from IEEE802.15.4e due to its high reliability and time-deterministic characteristic, that achieves industrial performance requirements while offering the benefits of IP connectivity. This work proposes the addition of a second radio interface in 6TiSCH devices to operate a parallel network in sub-GHz, introducing transmit diversity while benefiting from decreased path-loss and reduced interference. Simulation results show an improvement of 25% in Packet Delivery Ratio (PDR) and closely to 30% in latency in different 6TiSCH networks scenarios.

cs.NI↗

arXiv2021

Network Slicing for eMBB and mMTC with NOMA and Space Diversity Reception

In this work we study the coexistence in the same Radio Access Network (RAN) of two generic services present in the Fifth Generation (5G) of wireless communication systems: enhanced Mobile BroadBand (eMBB) and massive Machine-Type Communications (mMTC). eMBB services are requested for applications that demand extremely high data rates and moderate requirements on latency and reliability, whereas mMTC enables applications for connecting a massive number of low-power and low-complexity devices. The coexistence of both services is enabled by means of network slicing and Non-Orthogonal Multiple Access (NOMA) with Successive Interference Cancellation (SIC) decoding. Under the orthogonal slicing, the radio resources are exclusively allocated to each service, while in the non-orthogonal slicing the traffics from both services overlap in the same radio resources. We evaluate the uplink performance of both services in a scenario with a multi-antenna Base Station (BS). Our simulation results show that the performance gains obtained through multiple receive antennas are more accentuated for the non-orthogonal slicing than for the orthogonal allocation of resources, such that the non-orthogonal slicing outperforms its orthogonal counterpart in terms of achievable data rates or number of connected devices as the number of receive antennas increases.

eess.SP↗

arXiv2021

Non-Orthogonal Multiple Access and Network Slicing: Scalable Coexistence of eMBB and URLLC

The 5G systems will feature three generic services: enhanced Mobile BroadBand (eMBB), massive Machine-Type Communications (mMTC) and Ultra-Reliable and Low-Latency Communications (URLLC). The diverse requirements of these services in terms of data-rates, number of connected devices, latency and reliability can lead to a sub-optimal use of the 5G network, thus network slicing is proposed as a solution that creates customized slices of the network specifically designed to meet the requirements of each service. Under the network slicing, the radio resources can be shared in orthogonal and non-orthogonal schemes. Motivated by Industrial Internet of Things (IIoT) scenarios where a large number of sensors may require connectivity with stringent requirements of latency and reliability, we propose the use of Non-Orthogonal Multiple Access (NOMA) to improve the number of URLLC users that are connected in the uplink to the same base station (BS), for both orthogonal and non-orthogonal network slicing with eMBB users. The multiple URLLC users transmit simultaneously and across multiple frequency channels. We set the reliability requirements for the two services and analyze their pair of sum rates. We show that, even with overlapping transmissions from multiple eMBB and URLLC users, the use of NOMA techniques allows us to guarantee the reliability requirements for both services.

eess.SP↗

arXiv2021

Massive Wireless Energy Transfer: Enabling Sustainable IoT Towards 6G Era

Recent advances on wireless energy transfer (WET) make it a promising solution for powering future Internet of Things (IoT) devices enabled by the upcoming sixth generation (6G) era. The main architectures, challenges and techniques for efficient and scalable wireless powering are overviewed in this paper. Candidates enablers such as energy beamforming (EB), distributed antenna systems (DAS), advances on devices' hardware and programmable medium, new spectrum opportunities, resource scheduling and distributed ledger technology are outlined. Special emphasis is placed on discussing the suitability of channel state information (CSI)-limited/free strategies when powering simultaneously a massive number of devices. The benefits from combining DAS and EB, and from using average CSI whenever available, are numerically illustrated. The pros and cons of the state-of-the-art CSI-free WET techniques in ultra-low power setups are thoroughly revised, and some possible future enhancements are outlined. Finally, key research directions towards realizing WET-enabled massive IoT networks in the 6G era are identified and discussed in detail.

cs.NI↗

arXiv2020

Performance Analysis of Single-Cell Adaptive Data Rate-Enabled LoRaWAN

LoRaWAN enables massive connectivity for Internet-of-Things applications. Many published works employ stochastic geometry to derive outage models of LoRaWAN over fading channels assuming fixed transmit power and distance-based spreading factor (SF) allocation. However, in practice, LoRaWAN employs the Adaptive Data Rate (ADR) mechanism, which dynamically adjusts SF and transmit power of nodes based on channel state. The community addressed the performance of ADR using simulations, but analytical models have not been introduced. In this letter, we seek to close this gap. We build over an analytical LoRaWAN model to consider the performance of steady-state ADR-enabled LoRaWAN. We derive outage expressions and an optimization procedure to maximize the number of users under reliability constraints. Results show that power allocation reduces interference and improves network capacity while reducing average power.

cs.NI↗

arXiv2020

Achieving Fair Random Access Performance in Massive MIMO Crowded Machine-Type Networks

The use of massive multiple-input multiple-output (MIMO) to serve a crowd of user equipments (UEs) is challenged by the deficit of pilots. Assuming that the UEs are intermittently active, this problem can be addressed by a shared access to the pilots and a suitable random access (RA) protocol. The strongest-user collision resolution (SUCRe) is a previously proposed RA protocol that often privileges the UEs closer to the base station (BS). In contrast, we propose a novel RA protocol using a decentralized pilot power allocation method that aims at a fairer performance. The proposed access class barring with power control (ACBPC) protocol allows each UE to estimate, without additional overhead, how many UEs collided for the chosen pilot and calculate an ACB factor, which is then used to determine the pilot retransmission probability in the next protocol step. The results show that the proposed ACBPC protocol is superior to SUCRe in terms of providing a fair connectivity for very crowded networks, although still being distributed and uncoordinated as the original SUCRe protocol.

eess.SP↗

arXiv2020

Hybrid Coded Replication in LoRa Networks

Low Power Wide Area Networks (LPWAN) are wireless connectivity solutions for Internet-of-Things (IoT) applications, including industrial automation. Among the several LPWAN technologies, LoRaWAN has been extensively addressed by the research community and the industry. However, the reliability and scalability of LoRaWAN are still uncertain. One of the techniques to increase the reliability of LoRaWAN is message replication, which exploits time diversity. This paper proposes a novel hybrid coded message replication scheme that interleaves simple repetition and a recently proposed coded replication method. We analyze the optimization of the proposed scheme under minimum reliability requirements and show that it enhances the network performance without requiring additional transmit power compared to the competing replication techniques.

cs.NI↗

arXiv2019

Optimum LoRaWAN Configuration Under Wi-SUN Interference

Smart Utility Networks (SUN) rely on the Wireless-SUN (Wi-SUN) specification for years. Recently practitioners and researchers have considered Low-Power Wide-Area Networks (LPWAN) like LoRaWAN for SUN applications. With distinct technologies deployed in the same area and sharing unlicensed bands, one can expect these networks to interfere with one another. This paper builds over a LoRaWAN model to optimize network parameters while accounting for inter-technology interference. Our analytic model accounts for the interference LoRaWAN receives from IEEE 802.15.4g networks, which forms the bottom layers of Wi-SUN systems. We derive closed-form equations for the expected reliability of LoRaWAN in such scenarios. We set the model parameters with data from real measurements of the interplay among the technologies. Finally, we propose two optimization algorithms to determine the best LoRaWAN configurations, given a targeted minimum reliability level. The algorithms maximize either communication range or the number of users given constraints on the minimum number of users, minimum communication range, and minimum reliability. We validate the models and algorithms through numerical analysis and simulations. The proposed methods are useful tools for planning interference-limited networks with requirements of minimum reliability.

eess.SP↗

arXiv2019

Rate Control for Wireless-Powered Communication Network with Reliability and Delay Constraints

We consider a two-phase Wireless-Powered Communication Network under Nakagami-m fading, where a wireless energy transfer process first powers a sensor node that then uses such energy to transmit its data in the wireless information transmission phase. We explore a fixed transmit rate scheme designed to cope with the reliability and delay constraints of the system while attaining closed-form approximations for the optimum wireless energy transfer and wireless information transmission blocklength. Then, a more-elaborate rate control strategy exploiting the readily available battery charge information is proposed and the results evidence its outstanding performance when compared with the fixed transmit rate, for which no battery charge information is available. It even reaches an average rate performance close to that of an ideal scheme requiring full Channel State Information at transmitter side. Numerical results show the positive impact of a greater number of antennas at the destination, and evidence that the greater the reliability constraints, the smaller the message sizes on average, and the smaller the optimum information blocklengths. Finally, we corroborate the appropriateness of using the asymptotic blocklength formulation as an approximation of the non-asymptotic finite blocklength results.

cs.IT↗